diff options
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 9625a5abfff9..12e92aece3ea 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -42,6 +42,20 @@ config USB_GADGET For more information, see <http://www.linux-usb.org/gadget> and the kernel DocBook documentation for this API. +config USB_GADGET_DEBUG + boolean "Debugging messages" + depends on USB_GADGET && DEBUG_KERNEL && EXPERIMENTAL + help + Many controller and gadget drivers will print some debugging + messages if you use this option to ask for those messages. + + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. + config USB_GADGET_DEBUG_FILES boolean "Debugging information files" depends on USB_GADGET && PROC_FS @@ -68,6 +82,27 @@ choice Many controller drivers are platform-specific; these often need board-specific hooks. +config USB_GADGET_AMD5536UDC + boolean "AMD5536 UDC" + depends on PCI + select USB_GADGET_DUALSPEED + help + The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. + It is a USB Highspeed DMA capable USB device controller. Beside ep0 + it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + The UDC port supports OTG operation, and may be used as a host port + if it's not being used to implement peripheral or OTG roles. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "amd5536udc" and force all + gadget drivers to also be dynamically linked. + +config USB_AMD5536UDC + tristate + depends on USB_GADGET_AMD5536UDC + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" depends on MPC834x || PPC_MPC831x @@ -142,6 +177,24 @@ config USB_PXA2XX_SMALL default y if USB_ETH default y if USB_G_SERIAL +config USB_GADGET_M66592 + boolean "Renesas M66592 USB Peripheral Controller" + select USB_GADGET_DUALSPEED + help + M66592 is a discrete USB peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has seven configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "m66592_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_M66592 + tristate + depends on USB_GADGET_M66592 + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_GOKU boolean "Toshiba TC86C001 'Goku-S'" depends on PCI @@ -215,6 +268,27 @@ config USB_ARC default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_S3C2410 + boolean "S3C2410 USB Device Controller" + depends on ARCH_S3C2410 + help + Samsung's S3C2410 is an ARM-4 processor with an integrated + full speed USB 1.1 device controller. It has 4 configurable + endpoints, as well as endpoint zero (for control transfers). + + This driver has been tested on the S3C2410, S3C2412, and + S3C2440 processors. + +config USB_S3C2410 + tristate + depends on USB_GADGET_S3C2410 + default USB_GADGET + select USB_GADGET_SELECTED + +config USB_S3C2410_DEBUG + boolean "S3C2410 udc debug messages" + depends on USB_GADGET_S3C2410 + config USB_GADGET_AT91 boolean "AT91 USB Device Port" depends on ARCH_AT91 && !ARCH_AT91SAM9RL |