diff options
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 122 |
1 files changed, 110 insertions, 12 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index dd4cd5a51370..86a74f1c43f1 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -208,17 +208,6 @@ config USB_OMAP default USB_GADGET select USB_GADGET_SELECTED -config USB_OTG - boolean "OTG Support" - depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD - help - The most notable feature of USB OTG is support for a - "Dual-Role" device, which can act as either a device - or a host. The initial role choice can be changed - later, when two dual-role devices talk to each other. - - Select this only if your OMAP board has a Mini-AB connector. - config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX @@ -270,6 +259,21 @@ config USB_PXA27X default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_S3C2443 + boolean "S3C2443 USB Device Controller" + depends on S3C2443_USB_PHY_UDC + select USB_GADGET_SELECTED + help + Samsung's S3C2443 with an integrated full speed USB 2.0 device + controller. + +config USB_S3C2443 + tristate + depends on USB_GADGET_S3C2443 + default USB_GADGET + select USB_GADGET_SELECTED + select USB_GADGET_DUALSPEED + config USB_GADGET_S3C2410 boolean "S3C2410 USB Device Controller" depends on ARCH_S3C2410 @@ -290,7 +294,7 @@ config USB_S3C2410 config USB_S3C2410_DEBUG boolean "S3C2410 udc debug messages" depends on USB_GADGET_S3C2410 - + # # Controllers available in both integrated and discrete versions # @@ -419,6 +423,31 @@ config USB_GOKU default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_ARC + boolean "Freescale USB Device Controller" + depends on ARCH_MXC || ARCH_STMP3XXX + select USB_GADGET_DUALSPEED if USB_GADGET_FSL_1504 || USB_GADGET_FSL_UTMI + help + Some Freescale processors have a USBOTG controller, + which supports device mode. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "arc_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_STATIC_IRAM_PPH + bool "Apply static IRAM patch" + depends on USB_GADGET_ARC && (ARCH_MX37 || ARCH_MX3 || ARCH_MX25) + help + Apply static IRAM patch to peripheral driver. + +config USB_ARC + tristate + depends on USB_GADGET_ARC + default USB_GADGET + select USB_GADGET_SELECTED + + # # LAST -- dummy/emulated controller @@ -466,6 +495,69 @@ config USB_GADGET_DUALSPEED Means that gadget drivers should include extra descriptors and code to handle dual-speed controllers. +config USB_GADGET_ARC_OTG + bool "Support for DR peripheral port on Freescale controller" + depends on USB_GADGET_ARC + default y + help + Enable support for the Freescale Dual Role port in peripheral mode. + +choice + prompt "Select transceiver for DR port" + depends on USB_GADGET_ARC_OTG + help + Choose the transceiver to use with the Freescale DR port. + +config USB_GADGET_FSL_MC13783 + bool "Freescale MC13783" + depends on !USB_EHCI_FSL_1301 && !USB_EHCI_FSL_1504 && !USB_EHCI_FSL_UTMI && !MACH_MX25_3DS + ---help--- + Enable support for the Full Speed Freescale MC13783 transceiver. + + The mx27ads, mx31ads and mx32ads boards require modifications + to support this transceiver. + +config USB_GADGET_FSL_1301 + bool "Philips ISP1301" + depends on !USB_EHCI_FSL_MC13783 && !USB_EHCI_FSL_1504 && !USB_EHCI_FSL_UTMI && !MACH_MX25_3DS + ---help--- + Enable support for the Full Speed Philips ISP1301 transceiver. + + This is the factory default for the mx27ads board. + The mx31ads and mx32ads boards require modifications + to support this transceiver. + +config USB_GADGET_FSL_1504 + bool "Philips ISP1504" + depends on !USB_EHCI_FSL_MC13783 && !USB_EHCI_FSL_1301 && !USB_EHCI_FSL_UTMI && !MACH_MX25_3DS + ---help--- + Enable support for the High Speed Philips ISP1504 transceiver. + + This is the factory default for the mx31ads and mx32ads boards. + The mx27ads board requires modifications to support this transceiver. + +config USB_GADGET_FSL_UTMI + bool "On-chip UTMI" + depends on !USB_EHCI_FSL_MC13783 && !USB_EHCI_FSL_1301 && !USB_EHCI_FSL_1504 + ---help--- + Enable support for the High Speed Philips ISP1504 transceiver. + + This is the factory default for the mx35 board. + +endchoice + +config USB_OTG + boolean "OTG Support" + depends on (USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD) || \ + (USB_GADGET_ARC && (ARCH_MXC || ARCH_STMP3XXX) && USB_EHCI_HCD) + help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role choice can be changed + later, when two dual-role devices talk to each other. + + Select this only if your OMAP board has a Mini-AB connector. + # # USB Gadget Drivers # @@ -601,6 +693,12 @@ config USB_FILE_STORAGE Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_file_storage". +config STMP_UTP + bool "UTP over Storage Gadget" + depends on USB_FILE_STORAGE && ARCH_STMP3XXX + help + Freescale's extension to MSC protocol + config USB_FILE_STORAGE_TEST bool "File-backed Storage Gadget testing version" depends on USB_FILE_STORAGE |