diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/ehci-q.c | 13 | ||||
-rw-r--r-- | drivers/usb/host/fotg210-hcd.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/hwa-hc.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ohci-hcd.c | 15 | ||||
-rw-r--r-- | drivers/usb/host/pci-quirks.c | 31 | ||||
-rw-r--r-- | drivers/usb/host/u132-hcd.c | 3 | ||||
-rw-r--r-- | drivers/usb/host/xhci-hub.c | 18 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mem.c | 16 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mtk-sch.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 17 | ||||
-rw-r--r-- | drivers/usb/host/xhci-plat.c | 1 | ||||
-rw-r--r-- | drivers/usb/host/xhci-rcar.c | 3 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 32 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 63 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 3 |
15 files changed, 158 insertions, 67 deletions
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 27b53f4386bd..c10dd8b747bc 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -40,6 +40,10 @@ /*-------------------------------------------------------------------------*/ +/* PID Codes that are used here, from EHCI specification, Table 3-16. */ +#define PID_CODE_IN 1 +#define PID_CODE_SETUP 2 + /* fill a qtd, returning how much of the buffer we were able to queue up */ static int @@ -203,7 +207,7 @@ static int qtd_copy_status ( int status = -EINPROGRESS; /* count IN/OUT bytes, not SETUP (even short packets) */ - if (likely (QTD_PID (token) != 2)) + if (likely(QTD_PID(token) != PID_CODE_SETUP)) urb->actual_length += length - QTD_LENGTH (token); /* don't modify error codes */ @@ -219,6 +223,13 @@ static int qtd_copy_status ( if (token & QTD_STS_BABBLE) { /* FIXME "must" disable babbling device's port too */ status = -EOVERFLOW; + /* + * When MMF is active and PID Code is IN, queue is halted. + * EHCI Specification, Table 4-13. + */ + } else if ((token & QTD_STS_MMF) && + (QTD_PID(token) == PID_CODE_IN)) { + status = -EPROTO; /* CERR nonzero + halt --> stall */ } else if (QTD_CERR(token)) { status = -EPIPE; diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 66efa9a67687..72853020a542 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1653,6 +1653,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* see what we found out */ temp = check_reset_complete(fotg210, wIndex, status_reg, fotg210_readl(fotg210, status_reg)); + + /* restart schedule */ + fotg210->command |= CMD_RUN; + fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); } if (!(temp & (PORT_RESUME|PORT_RESET))) { diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 97750f162f01..c14e4a64b0e8 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -173,7 +173,7 @@ out: return result; error_set_cluster_id: - wusb_cluster_id_put(wusbhc->cluster_id); + wusb_cluster_id_put(addr); error_cluster_id_get: goto out; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 1afb76e8b1a5..17f1cf02ce34 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -417,8 +417,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static void -ohci_shutdown (struct usb_hcd *hcd) +static void _ohci_shutdown(struct usb_hcd *hcd) { struct ohci_hcd *ohci; @@ -434,6 +433,16 @@ ohci_shutdown (struct usb_hcd *hcd) ohci->rh_state = OHCI_RH_HALTED; } +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ @@ -752,7 +761,7 @@ static void io_watchdog_func(unsigned long _ohci) died: usb_hc_died(ohci_to_hcd(ohci)); ohci_dump(ohci); - ohci_shutdown(ohci_to_hcd(ohci)); + _ohci_shutdown(ohci_to_hcd(ohci)); goto done; } else { /* No write back because the done queue was empty */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ee213c5f4107..11b0767ca1ba 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -187,7 +187,7 @@ int usb_amd_find_chipset_info(void) { unsigned long flags; struct amd_chipset_info info; - int ret; + int need_pll_quirk = 0; spin_lock_irqsave(&amd_lock, flags); @@ -201,21 +201,28 @@ int usb_amd_find_chipset_info(void) spin_unlock_irqrestore(&amd_lock, flags); if (!amd_chipset_sb_type_init(&info)) { - ret = 0; goto commit; } - /* Below chipset generations needn't enable AMD PLL quirk */ - if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN || - info.sb_type.gen == AMD_CHIPSET_SB600 || - info.sb_type.gen == AMD_CHIPSET_YANGTZE || - (info.sb_type.gen == AMD_CHIPSET_SB700 && - info.sb_type.rev > 0x3b)) { + switch (info.sb_type.gen) { + case AMD_CHIPSET_SB700: + need_pll_quirk = info.sb_type.rev <= 0x3B; + break; + case AMD_CHIPSET_SB800: + case AMD_CHIPSET_HUDSON2: + case AMD_CHIPSET_BOLTON: + need_pll_quirk = 1; + break; + default: + need_pll_quirk = 0; + break; + } + + if (!need_pll_quirk) { if (info.smbus_dev) { pci_dev_put(info.smbus_dev); info.smbus_dev = NULL; } - ret = 0; goto commit; } @@ -234,7 +241,7 @@ int usb_amd_find_chipset_info(void) } } - ret = info.probe_result = 1; + need_pll_quirk = info.probe_result = 1; printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); commit: @@ -245,7 +252,7 @@ commit: /* Mark that we where here */ amd_chipset.probe_count++; - ret = amd_chipset.probe_result; + need_pll_quirk = amd_chipset.probe_result; spin_unlock_irqrestore(&amd_lock, flags); @@ -259,7 +266,7 @@ commit: spin_unlock_irqrestore(&amd_lock, flags); } - return ret; + return need_pll_quirk; } EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 43618976d68a..3efb7b0e8269 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3208,6 +3208,9 @@ static int __init u132_hcd_init(void) printk(KERN_INFO "driver %s\n", hcd_name); workqueue = create_singlethread_workqueue("u132"); retval = platform_driver_register(&u132_platform_driver); + if (retval) + destroy_workqueue(workqueue); + return retval; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 03fe5e26fd07..418d27898e03 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -843,7 +843,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, __le32 __iomem **port_array, u16 wIndex, u32 raw_port_status, - unsigned long flags) + unsigned long *flags) __releases(&xhci->lock) __acquires(&xhci->lock) { @@ -875,6 +875,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_BH_RESET << 16; if ((raw_port_status & PORT_CEC)) status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 remote wake resume signaling completed */ + if (bus_state->port_remote_wakeup & (1 << wIndex) && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME && + (raw_port_status & PORT_PLS_MASK) != XDEV_RECOVERY) { + bus_state->port_remote_wakeup &= ~(1 << wIndex); + usb_hcd_end_port_resume(&hcd->self, wIndex); + } } if (hcd->speed < HCD_USB3) { @@ -925,12 +933,12 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); - spin_unlock_irqrestore(&xhci->lock, flags); + spin_unlock_irqrestore(&xhci->lock, *flags); time_left = wait_for_completion_timeout( &bus_state->rexit_done[wIndex], msecs_to_jiffies( XHCI_MAX_REXIT_TIMEOUT_MS)); - spin_lock_irqsave(&xhci->lock, flags); + spin_lock_irqsave(&xhci->lock, *flags); if (time_left) { slot_id = xhci_find_slot_id_by_port(hcd, @@ -1077,7 +1085,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp, flags); + wIndex, temp, &flags); if (status == 0xffffffff) goto error; @@ -1097,7 +1105,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } port_li = readl(port_array[wIndex] + PORTLI); status = xhci_get_ext_port_status(temp, port_li); - put_unaligned_le32(cpu_to_le32(status), &buf[4]); + put_unaligned_le32(status, &buf[4]); } break; case SetPortFeature: diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 436e787d95b4..d8cf3107df53 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1532,9 +1532,15 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Allow 3 retries for everything but isoc, set CErr = 3 */ if (!usb_endpoint_xfer_isoc(&ep->desc)) err_count = 3; - /* Some devices get this wrong */ - if (usb_endpoint_xfer_bulk(&ep->desc) && udev->speed == USB_SPEED_HIGH) - max_packet = 512; + /* HS bulk max packet should be 512, FS bulk supports 8, 16, 32 or 64 */ + if (usb_endpoint_xfer_bulk(&ep->desc)) { + if (udev->speed == USB_SPEED_HIGH) + max_packet = 512; + if (udev->speed == USB_SPEED_FULL) { + max_packet = rounddown_pow_of_two(max_packet); + max_packet = clamp_val(max_packet, 8, 64); + } + } /* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */ if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100) avg_trb_len = 8; @@ -1930,10 +1936,14 @@ no_bw: kfree(xhci->port_array); kfree(xhci->rh_bw); kfree(xhci->ext_caps); + kfree(xhci->usb2_rhub.psi); + kfree(xhci->usb3_rhub.psi); xhci->usb2_ports = NULL; xhci->usb3_ports = NULL; xhci->port_array = NULL; + xhci->usb2_rhub.psi = NULL; + xhci->usb3_rhub.psi = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 73f763c4f5f5..144674913c78 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -122,7 +122,9 @@ static void setup_sch_info(struct usb_device *udev, } if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { - if (esit_pkts <= sch_ep->esit) + if (sch_ep->esit == 1) + sch_ep->pkts = esit_pkts; + else if (esit_pkts <= sch_ep->esit) sch_ep->pkts = 1; else sch_ep->pkts = roundup_pow_of_two(esit_pkts) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index b5140555a8d5..4355fbc36fce 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -53,6 +53,7 @@ #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 +#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 @@ -170,7 +171,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && @@ -468,6 +470,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) retval = xhci_resume(xhci, hibernated); return retval; } + +static void xhci_pci_shutdown(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + xhci_shutdown(hcd); + + /* Yet another workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(pdev, PCI_D3hot); +} #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -505,6 +519,7 @@ static int __init xhci_pci_init(void) #ifdef CONFIG_PM xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; xhci_pci_hc_driver.pci_resume = xhci_pci_resume; + xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; #endif return pci_register_driver(&xhci_pci_driver); } diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 248cdaa62397..c76b038c8bea 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -398,6 +398,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); static struct platform_driver usb_xhci_driver = { .probe = xhci_plat_probe, .remove = xhci_plat_remove, + .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xhci-hcd", .pm = &xhci_plat_pm_ops, diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 0e4535e632ec..89ec9f0905ca 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -84,7 +84,7 @@ static int xhci_rcar_is_gen2(struct device *dev) return of_device_is_compatible(node, "renesas,xhci-r8a7790") || of_device_is_compatible(node, "renesas,xhci-r8a7791") || of_device_is_compatible(node, "renesas,xhci-r8a7793") || - of_device_is_compatible(node, "renensas,rcar-gen2-xhci"); + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); } static int xhci_rcar_is_gen3(struct device *dev) @@ -192,5 +192,6 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) xhci_rcar_is_gen3(hcd->self.controller)) xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + xhci->quirks |= XHCI_TRUST_TX_LENGTH; return xhci_rcar_download_firmware(hcd); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0cc271969ffb..61aeab4c759c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -678,6 +678,7 @@ void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, struct xhci_ring *ring, struct device *dev = xhci_to_hcd(xhci)->self.controller; struct xhci_segment *seg = td->bounce_seg; struct urb *urb = td->urb; + size_t len; if (!seg || !urb) return; @@ -688,11 +689,14 @@ void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, struct xhci_ring *ring, return; } - /* for in tranfers we need to copy the data from bounce to sg */ - sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf, - seg->bounce_len, seg->bounce_offs); dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len, DMA_FROM_DEVICE); + /* for in tranfers we need to copy the data from bounce to sg */ + len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, + seg->bounce_len, seg->bounce_offs); + if (len != seg->bounce_len) + xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n", + len, seg->bounce_len); seg->bounce_len = 0; seg->bounce_offs = 0; } @@ -1605,9 +1609,6 @@ static void handle_port_status(struct xhci_hcd *xhci, usb_hcd_resume_root_hub(hcd); } - if (hcd->speed >= HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE) - bus_state->port_remote_wakeup &= ~(1 << faked_port_index); - if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1626,6 +1627,7 @@ static void handle_port_status(struct xhci_hcd *xhci, bus_state->port_remote_wakeup |= 1 << faked_port_index; xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); + usb_hcd_start_port_resume(&hcd->self, faked_port_index); xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); /* Need to wait until the next link state change @@ -1645,10 +1647,13 @@ static void handle_port_status(struct xhci_hcd *xhci, } } - if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 && - DEV_SUPERSPEED_ANY(temp)) { + if ((temp & PORT_PLC) && + DEV_SUPERSPEED_ANY(temp) && + ((temp & PORT_PLS_MASK) == XDEV_U0 || + (temp & PORT_PLS_MASK) == XDEV_U1 || + (temp & PORT_PLS_MASK) == XDEV_U2)) { xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* We've just brought the device into U0 through either the + /* We've just brought the device into U0/1/2 through either the * Resume state after a device remote wakeup, or through the * U3Exit state after a host-initiated resume. If it's a device * initiated remote wake, don't pass up the link state change, @@ -1660,8 +1665,6 @@ static void handle_port_status(struct xhci_hcd *xhci, if (slot_id && xhci->devs[slot_id]) xhci_ring_device(xhci, slot_id); if (bus_state->port_remote_wakeup & (1 << faked_port_index)) { - bus_state->port_remote_wakeup &= - ~(1 << faked_port_index); xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); usb_wakeup_notification(hcd->self.root_hub, @@ -3155,6 +3158,7 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, unsigned int unalign; unsigned int max_pkt; u32 new_buff_len; + size_t len; max_pkt = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); unalign = (enqd_len + *trb_buff_len) % max_pkt; @@ -3185,8 +3189,12 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, /* create a max max_pkt sized bounce buffer pointed to by last trb */ if (usb_urb_dir_out(urb)) { - sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs, + len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, new_buff_len, enqd_len); + if (len != new_buff_len) + xhci_warn(xhci, + "WARN Wrong bounce buffer write length: %zu != %d\n", + len, new_buff_len); seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, max_pkt, DMA_TO_DEVICE); } else { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7c95779c7a0e..eb9535221800 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -21,6 +21,7 @@ */ #include <linux/pci.h> +#include <linux/iopoll.h> #include <linux/irq.h> #include <linux/log2.h> #include <linux/module.h> @@ -47,7 +48,6 @@ static unsigned int quirks; module_param(quirks, uint, S_IRUGO); MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); -/* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * xhci_handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read @@ -64,18 +64,16 @@ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; + int ret; - do { - result = readl(ptr); - if (result == ~(u32)0) /* card removed */ - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + ret = readl_poll_timeout_atomic(ptr, result, + (result & mask) == done || + result == U32_MAX, + 1, usec); + if (result == U32_MAX) /* card removed */ + return -ENODEV; + + return ret; } /* @@ -764,11 +762,8 @@ void xhci_shutdown(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_shutdown completed - status = %x", readl(&xhci->op_regs->status)); - - /* Yet another workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot); } +EXPORT_SYMBOL_GPL(xhci_shutdown); #ifdef CONFIG_PM static void xhci_save_registers(struct xhci_hcd *xhci) @@ -939,7 +934,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci) int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) { int rc = 0; - unsigned int delay = XHCI_MAX_HALT_USEC; + unsigned int delay = XHCI_MAX_HALT_USEC * 2; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; @@ -991,7 +986,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) command |= CMD_CSS; writel(command, &xhci->op_regs->command); if (xhci_handshake(&xhci->op_regs->status, - STS_SAVE, 0, 10 * 1000)) { + STS_SAVE, 0, 20 * 1000)) { xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -1051,6 +1046,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) hibernated = true; if (!hibernated) { + /* + * Some controllers might lose power during suspend, so wait + * for controller not ready bit to clear, just as in xHC init. + */ + retval = xhci_handshake(&xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); + if (retval) { + xhci_warn(xhci, "Controller not ready at resume %d\n", + retval); + spin_unlock_irq(&xhci->lock); + return retval; + } /* step 1: restore register */ xhci_restore_registers(xhci); /* step 2: initialize command ring buffer */ @@ -4192,7 +4199,6 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, pm_addr = port_array[port_num] + PORTPMSC; pm_val = readl(pm_addr); hlpm_addr = port_array[port_num] + PORTHLPMC; - field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); @@ -4204,6 +4210,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ + field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); @@ -4530,12 +4537,12 @@ static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, desc, state, timeout); - /* If we found we can't enable hub-initiated LPM, or + /* If we found we can't enable hub-initiated LPM, and * the U1 or U2 exit latency was too high to allow - * device-initiated LPM as well, just stop searching. + * device-initiated LPM as well, then we will disable LPM + * for this device, so stop searching any further. */ - if (alt_timeout == USB3_LPM_DISABLED || - alt_timeout == USB3_LPM_DEVICE_INITIATED) { + if (alt_timeout == USB3_LPM_DISABLED) { *timeout = alt_timeout; return -E2BIG; } @@ -4646,10 +4653,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, if (intf->dev.driver) { driver = to_usb_driver(intf->dev.driver); if (driver && driver->disable_hub_initiated_lpm) { - dev_dbg(&udev->dev, "Hub-initiated %s disabled " - "at request of driver %s\n", - state_name, driver->name); - return xhci_get_timeout_no_hub_lpm(udev, state); + dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n", + state_name, driver->name); + timeout = xhci_get_timeout_no_hub_lpm(udev, + state); + if (timeout == USB3_LPM_DISABLED) + return timeout; } } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index aff24f0be38e..8640560171cf 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -311,10 +311,12 @@ struct xhci_op_regs { */ #define PORT_PLS_MASK (0xf << 5) #define XDEV_U0 (0x0 << 5) +#define XDEV_U1 (0x1 << 5) #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_INACTIVE (0x6 << 5) #define XDEV_POLLING (0x7 << 5) +#define XDEV_RECOVERY (0x8 << 5) #define XDEV_COMP_MODE (0xa << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ @@ -1868,6 +1870,7 @@ int xhci_run(struct usb_hcd *hcd); void xhci_stop(struct usb_hcd *hcd); void xhci_shutdown(struct usb_hcd *hcd); int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); +void xhci_shutdown(struct usb_hcd *hcd); void xhci_init_driver(struct hc_driver *drv, const struct xhci_driver_overrides *over); int xhci_disable_slot(struct xhci_hcd *xhci, |