summaryrefslogtreecommitdiff
path: root/drivers/usb/misc/usb3503.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/misc/usb3503.c')
-rw-r--r--drivers/usb/misc/usb3503.c59
1 files changed, 57 insertions, 2 deletions
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index a31641e18d19..f43c61989cef 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -57,10 +58,12 @@ struct usb3503 {
enum usb3503_mode mode;
struct regmap *regmap;
struct device *dev;
+ struct clk *clk;
u8 port_off_mask;
int gpio_intn;
int gpio_reset;
int gpio_connect;
+ bool secondary_ref_clk;
};
static int usb3503_reset(struct usb3503 *hub, int state)
@@ -184,8 +187,58 @@ static int usb3503_probe(struct usb3503 *hub)
hub->gpio_reset = pdata->gpio_reset;
hub->mode = pdata->initial_mode;
} else if (np) {
+ struct clk *clk;
hub->port_off_mask = 0;
+ clk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
+ dev_err(dev, "unable to request refclk (%d)\n", err);
+ return PTR_ERR(clk);
+ }
+
+ if (!IS_ERR(clk)) {
+ u32 rate = 0;
+ hub->clk = clk;
+
+ if (!of_property_read_u32(np, "refclk-frequency",
+ &rate)) {
+
+ switch (rate) {
+ case 38400000:
+ case 26000000:
+ case 19200000:
+ case 12000000:
+ hub->secondary_ref_clk = 0;
+ break;
+ case 24000000:
+ case 27000000:
+ case 25000000:
+ case 50000000:
+ hub->secondary_ref_clk = 1;
+ break;
+ default:
+ dev_err(dev,
+ "unsupported reference clock rate (%d)\n",
+ (int) rate);
+ return -EINVAL;
+ }
+ err = clk_set_rate(hub->clk, rate);
+ if (err) {
+ dev_err(dev,
+ "unable to set reference clock rate to %d\n",
+ (int) rate);
+ return err;
+ }
+ }
+
+ err = clk_prepare_enable(hub->clk);
+ if (err) {
+ dev_err(dev,
+ "unable to enable reference clock\n");
+ return err;
+ }
+ }
+
property = of_get_property(np, "disabled-ports", &len);
if (property && (len / sizeof(u32)) > 0) {
int i;
@@ -213,8 +266,10 @@ static int usb3503_probe(struct usb3503 *hub)
dev_err(dev, "Ports disabled with no control interface\n");
if (gpio_is_valid(hub->gpio_intn)) {
- err = devm_gpio_request_one(dev, hub->gpio_intn,
- GPIOF_OUT_INIT_HIGH, "usb3503 intn");
+ int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW :
+ GPIOF_OUT_INIT_HIGH;
+ err = devm_gpio_request_one(dev, hub->gpio_intn, val,
+ "usb3503 intn");
if (err) {
dev_err(dev,
"unable to request GPIO %d as connect pin (%d)\n",