diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 004b6598706b..d5a1832aa48e 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -52,6 +52,7 @@ static int cp210x_port_remove(struct usb_serial_port *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0404, 0x034C) }, /* NCR Retail IO Box */ { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ @@ -69,6 +70,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */ + { USB_DEVICE(0x106F, 0x0003) }, /* CPI / Money Controls Bulk Coin Recycler */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ @@ -193,6 +195,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */ + { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ @@ -1552,6 +1556,8 @@ static int cp2105_gpioconf_init(struct usb_serial *serial) /* 2 banks of GPIO - One for the pins taken from each serial port */ if (intf_num == 0) { + priv->gc.ngpio = 2; + if (mode.eci == CP210X_PIN_MODE_MODEM) { /* mark all GPIOs of this interface as reserved */ priv->gpio_altfunc = 0xff; @@ -1562,8 +1568,9 @@ static int cp2105_gpioconf_init(struct usb_serial *serial) priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) & CP210X_ECI_GPIO_MODE_MASK) >> CP210X_ECI_GPIO_MODE_OFFSET); - priv->gc.ngpio = 2; } else if (intf_num == 1) { + priv->gc.ngpio = 3; + if (mode.sci == CP210X_PIN_MODE_MODEM) { /* mark all GPIOs of this interface as reserved */ priv->gpio_altfunc = 0xff; @@ -1574,7 +1581,6 @@ static int cp2105_gpioconf_init(struct usb_serial *serial) priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) & CP210X_SCI_GPIO_MODE_MASK) >> CP210X_SCI_GPIO_MODE_OFFSET); - priv->gc.ngpio = 3; } else { return -ENODEV; } |