summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/mos7840.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/mos7840.c')
-rw-r--r--drivers/usb/serial/mos7840.c71
1 files changed, 25 insertions, 46 deletions
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 88828b4b8c44..a698d46ba773 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -94,6 +94,7 @@
/* The native mos7840/7820 component */
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7840 0x7840
+#define MOSCHIP_DEVICE_ID_7843 0x7843
#define MOSCHIP_DEVICE_ID_7820 0x7820
#define MOSCHIP_DEVICE_ID_7810 0x7810
/* The native component can have its vendor/device id's overridden
@@ -176,6 +177,7 @@ enum mos7840_flag {
static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -298,15 +300,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
val = val & 0x00ff;
/* For the UART control registers, the application number need
to be Or'ed */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ val |= ((__u16)port->port_number + 2) << 8;
+ else
val |= ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- val |= ((__u16)port->port_number + 1) << 8;
- } else {
- val |= ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -332,15 +329,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
return -ENOMEM;
/* Wval is same as application number */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ Wval = ((__u16)port->port_number + 2) << 8;
+ else
Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- Wval = ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
@@ -601,7 +593,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
struct usb_serial *serial;
__u16 Data;
unsigned char *data;
- __u8 sp[5], st;
+ __u8 sp[5];
int i, rv = 0;
__u16 wval, wreg = 0;
int status = urb->status;
@@ -644,7 +636,6 @@ static void mos7840_interrupt_callback(struct urb *urb)
sp[1] = (__u8) data[1];
sp[2] = (__u8) data[2];
sp[3] = (__u8) data[3];
- st = (__u8) data[4];
for (i = 0; i < serial->num_ports; i++) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
@@ -1300,7 +1291,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
struct urb *urb;
/* __u16 Data; */
const unsigned char *current_position = data;
- unsigned char *data1;
if (mos7840_port_paranoia_check(port, __func__))
return -1;
@@ -1361,7 +1351,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
mos7840_bulk_out_data_callback, mos7840_port);
}
- data1 = urb->transfer_buffer;
dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
if (mos7840_port->has_led)
@@ -1592,7 +1581,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
int divisor = 0;
int status;
__u16 Data;
- unsigned char number;
__u16 clk_sel_val;
struct usb_serial_port *port;
@@ -1606,8 +1594,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
if (mos7840_serial_paranoia_check(port->serial, __func__))
return -1;
- number = mos7840_port->port->port_number;
-
dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
/* reset clk_uart_sel in spregOffset */
if (baudRate > 115200) {
@@ -1697,14 +1683,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
{
int baud;
unsigned cflag;
- unsigned iflag;
__u8 lData;
__u8 lParity;
__u8 lStop;
int status;
__u16 Data;
struct usb_serial_port *port;
- struct usb_serial *serial;
if (mos7840_port == NULL)
return;
@@ -1717,8 +1701,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (mos7840_serial_paranoia_check(port->serial, __func__))
return;
- serial = port->serial;
-
if (!mos7840_port->open) {
dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
@@ -1729,7 +1711,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
lParity = LCR_PAR_NONE;
cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
/* Change the number of bits */
switch (cflag & CSIZE) {
@@ -2043,7 +2024,8 @@ static int mos7840_probe(struct usb_serial *serial,
int device_type;
if (product == MOSCHIP_DEVICE_ID_7810 ||
- product == MOSCHIP_DEVICE_ID_7820) {
+ product == MOSCHIP_DEVICE_ID_7820 ||
+ product == MOSCHIP_DEVICE_ID_7843) {
device_type = product;
goto out;
}
@@ -2077,7 +2059,10 @@ static int mos7840_calc_num_ports(struct usb_serial *serial,
int device_type = (unsigned long)usb_get_serial_data(serial);
int num_ports;
- num_ports = (device_type >> 4) & 0x000F;
+ if (device_type == MOSCHIP_DEVICE_ID_7843)
+ num_ports = 3;
+ else
+ num_ports = (device_type >> 4) & 0x000F;
/*
* num_ports is currently never zero as device_type is one of
@@ -2132,22 +2117,16 @@ static int mos7840_port_probe(struct usb_serial_port *port)
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
+ } else {
+ u8 phy_num = mos7840_port->port_num;
+
+ /* Port 2 in the 2-port case uses registers of port 3 */
+ if (serial->num_ports == 2)
+ phy_num = 3;
+
+ mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2);
+ mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2);
+ mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2);
}
mos7840_dump_serial_port(port, mos7840_port);
mos7840_set_port_private(port, mos7840_port);
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-24 13:46:10 +0000