summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/mxu11x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/mxu11x0.c')
-rw-r--r--drivers/usb/serial/mxu11x0.c1006
1 files changed, 0 insertions, 1006 deletions
diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
deleted file mode 100644
index 619607323bfd..000000000000
--- a/drivers/usb/serial/mxu11x0.c
+++ /dev/null
@@ -1,1006 +0,0 @@
-/*
- * USB Moxa UPORT 11x0 Serial Driver
- *
- * Copyright (C) 2007 MOXA Technologies Co., Ltd.
- * Copyright (C) 2015 Mathieu Othacehe <m.othacehe@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * Supports the following Moxa USB to serial converters:
- * UPort 1110, 1 port RS-232 USB to Serial Hub.
- * UPort 1130, 1 port RS-422/485 USB to Serial Hub.
- * UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
- * protection.
- * UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
- * UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
- * protection.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-/* Vendor and product ids */
-#define MXU1_VENDOR_ID 0x110a
-#define MXU1_1110_PRODUCT_ID 0x1110
-#define MXU1_1130_PRODUCT_ID 0x1130
-#define MXU1_1150_PRODUCT_ID 0x1150
-#define MXU1_1151_PRODUCT_ID 0x1151
-#define MXU1_1131_PRODUCT_ID 0x1131
-
-/* Commands */
-#define MXU1_GET_VERSION 0x01
-#define MXU1_GET_PORT_STATUS 0x02
-#define MXU1_GET_PORT_DEV_INFO 0x03
-#define MXU1_GET_CONFIG 0x04
-#define MXU1_SET_CONFIG 0x05
-#define MXU1_OPEN_PORT 0x06
-#define MXU1_CLOSE_PORT 0x07
-#define MXU1_START_PORT 0x08
-#define MXU1_STOP_PORT 0x09
-#define MXU1_TEST_PORT 0x0A
-#define MXU1_PURGE_PORT 0x0B
-#define MXU1_RESET_EXT_DEVICE 0x0C
-#define MXU1_GET_OUTQUEUE 0x0D
-#define MXU1_WRITE_DATA 0x80
-#define MXU1_READ_DATA 0x81
-#define MXU1_REQ_TYPE_CLASS 0x82
-
-/* Module identifiers */
-#define MXU1_I2C_PORT 0x01
-#define MXU1_IEEE1284_PORT 0x02
-#define MXU1_UART1_PORT 0x03
-#define MXU1_UART2_PORT 0x04
-#define MXU1_RAM_PORT 0x05
-
-/* Modem status */
-#define MXU1_MSR_DELTA_CTS 0x01
-#define MXU1_MSR_DELTA_DSR 0x02
-#define MXU1_MSR_DELTA_RI 0x04
-#define MXU1_MSR_DELTA_CD 0x08
-#define MXU1_MSR_CTS 0x10
-#define MXU1_MSR_DSR 0x20
-#define MXU1_MSR_RI 0x40
-#define MXU1_MSR_CD 0x80
-#define MXU1_MSR_DELTA_MASK 0x0F
-#define MXU1_MSR_MASK 0xF0
-
-/* Line status */
-#define MXU1_LSR_OVERRUN_ERROR 0x01
-#define MXU1_LSR_PARITY_ERROR 0x02
-#define MXU1_LSR_FRAMING_ERROR 0x04
-#define MXU1_LSR_BREAK 0x08
-#define MXU1_LSR_ERROR 0x0F
-#define MXU1_LSR_RX_FULL 0x10
-#define MXU1_LSR_TX_EMPTY 0x20
-
-/* Modem control */
-#define MXU1_MCR_LOOP 0x04
-#define MXU1_MCR_DTR 0x10
-#define MXU1_MCR_RTS 0x20
-
-/* Mask settings */
-#define MXU1_UART_ENABLE_RTS_IN 0x0001
-#define MXU1_UART_DISABLE_RTS 0x0002
-#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
-#define MXU1_UART_ENABLE_DSR_OUT 0x0010
-#define MXU1_UART_ENABLE_CTS_OUT 0x0020
-#define MXU1_UART_ENABLE_X_OUT 0x0040
-#define MXU1_UART_ENABLE_XA_OUT 0x0080
-#define MXU1_UART_ENABLE_X_IN 0x0100
-#define MXU1_UART_ENABLE_DTR_IN 0x0800
-#define MXU1_UART_DISABLE_DTR 0x1000
-#define MXU1_UART_ENABLE_MS_INTS 0x2000
-#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
-#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
-
-/* Parity */
-#define MXU1_UART_NO_PARITY 0x00
-#define MXU1_UART_ODD_PARITY 0x01
-#define MXU1_UART_EVEN_PARITY 0x02
-#define MXU1_UART_MARK_PARITY 0x03
-#define MXU1_UART_SPACE_PARITY 0x04
-
-/* Stop bits */
-#define MXU1_UART_1_STOP_BITS 0x00
-#define MXU1_UART_1_5_STOP_BITS 0x01
-#define MXU1_UART_2_STOP_BITS 0x02
-
-/* Bits per character */
-#define MXU1_UART_5_DATA_BITS 0x00
-#define MXU1_UART_6_DATA_BITS 0x01
-#define MXU1_UART_7_DATA_BITS 0x02
-#define MXU1_UART_8_DATA_BITS 0x03
-
-/* Operation modes */
-#define MXU1_UART_232 0x00
-#define MXU1_UART_485_RECEIVER_DISABLED 0x01
-#define MXU1_UART_485_RECEIVER_ENABLED 0x02
-
-/* Pipe transfer mode and timeout */
-#define MXU1_PIPE_MODE_CONTINUOUS 0x01
-#define MXU1_PIPE_MODE_MASK 0x03
-#define MXU1_PIPE_TIMEOUT_MASK 0x7C
-#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
-
-/* Config struct */
-struct mxu1_uart_config {
- __be16 wBaudRate;
- __be16 wFlags;
- u8 bDataBits;
- u8 bParity;
- u8 bStopBits;
- char cXon;
- char cXoff;
- u8 bUartMode;
-} __packed;
-
-/* Purge modes */
-#define MXU1_PURGE_OUTPUT 0x00
-#define MXU1_PURGE_INPUT 0x80
-
-/* Read/Write data */
-#define MXU1_RW_DATA_ADDR_SFR 0x10
-#define MXU1_RW_DATA_ADDR_IDATA 0x20
-#define MXU1_RW_DATA_ADDR_XDATA 0x30
-#define MXU1_RW_DATA_ADDR_CODE 0x40
-#define MXU1_RW_DATA_ADDR_GPIO 0x50
-#define MXU1_RW_DATA_ADDR_I2C 0x60
-#define MXU1_RW_DATA_ADDR_FLASH 0x70
-#define MXU1_RW_DATA_ADDR_DSP 0x80
-
-#define MXU1_RW_DATA_UNSPECIFIED 0x00
-#define MXU1_RW_DATA_BYTE 0x01
-#define MXU1_RW_DATA_WORD 0x02
-#define MXU1_RW_DATA_DOUBLE_WORD 0x04
-
-struct mxu1_write_data_bytes {
- u8 bAddrType;
- u8 bDataType;
- u8 bDataCounter;
- __be16 wBaseAddrHi;
- __be16 wBaseAddrLo;
- u8 bData[0];
-} __packed;
-
-/* Interrupt codes */
-#define MXU1_CODE_HARDWARE_ERROR 0xFF
-#define MXU1_CODE_DATA_ERROR 0x03
-#define MXU1_CODE_MODEM_STATUS 0x04
-
-static inline int mxu1_get_func_from_code(unsigned char code)
-{
- return code & 0x0f;
-}
-
-/* Download firmware max packet size */
-#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
-
-/* Firmware image header */
-struct mxu1_firmware_header {
- __le16 wLength;
- u8 bCheckSum;
-} __packed;
-
-#define MXU1_UART_BASE_ADDR 0xFFA0
-#define MXU1_UART_OFFSET_MCR 0x0004
-
-#define MXU1_BAUD_BASE 923077
-
-#define MXU1_TRANSFER_TIMEOUT 2
-#define MXU1_DOWNLOAD_TIMEOUT 1000
-#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
-
-struct mxu1_port {
- u8 msr;
- u8 mcr;
- u8 uart_mode;
- spinlock_t spinlock; /* Protects msr */
- struct mutex mutex; /* Protects mcr */
- bool send_break;
-};
-
-struct mxu1_device {
- u16 mxd_model;
-};
-
-static const struct usb_device_id mxu1_idtable[] = {
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, mxu1_idtable);
-
-/* Write the given buffer out to the control pipe. */
-static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
- u8 request,
- u16 value, u16 index,
- void *data, size_t size)
-{
- int status;
-
- status = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request,
- (USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE), value, index,
- data, size,
- USB_CTRL_SET_TIMEOUT);
- if (status < 0) {
- dev_err(&serial->interface->dev,
- "%s - usb_control_msg failed: %d\n",
- __func__, status);
- return status;
- }
-
- if (status != size) {
- dev_err(&serial->interface->dev,
- "%s - short write (%d / %zd)\n",
- __func__, status, size);
- return -EIO;
- }
-
- return 0;
-}
-
-/* Send a vendor request without any data */
-static int mxu1_send_ctrl_urb(struct usb_serial *serial,
- u8 request, u16 value, u16 index)
-{
- return mxu1_send_ctrl_data_urb(serial, request, value, index,
- NULL, 0);
-}
-
-static int mxu1_download_firmware(struct usb_serial *serial,
- const struct firmware *fw_p)
-{
- int status = 0;
- int buffer_size;
- int pos;
- int len;
- int done;
- u8 cs = 0;
- u8 *buffer;
- struct usb_device *dev = serial->dev;
- struct mxu1_firmware_header *header;
- unsigned int pipe;
-
- pipe = usb_sndbulkpipe(dev, serial->port[0]->bulk_out_endpointAddress);
-
- buffer_size = fw_p->size + sizeof(*header);
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- memcpy(buffer, fw_p->data, fw_p->size);
- memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-
- for (pos = sizeof(*header); pos < buffer_size; pos++)
- cs = (u8)(cs + buffer[pos]);
-
- header = (struct mxu1_firmware_header *)buffer;
- header->wLength = cpu_to_le16(buffer_size - sizeof(*header));
- header->bCheckSum = cs;
-
- dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
-
- for (pos = 0; pos < buffer_size; pos += done) {
- len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
-
- status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done,
- MXU1_DOWNLOAD_TIMEOUT);
- if (status)
- break;
- }
-
- kfree(buffer);
-
- if (status) {
- dev_err(&dev->dev, "failed to download firmware: %d\n", status);
- return status;
- }
-
- msleep_interruptible(100);
- usb_reset_device(dev);
-
- dev_dbg(&dev->dev, "%s - download successful\n", __func__);
-
- return 0;
-}
-
-static int mxu1_port_probe(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
- struct mxu1_device *mxdev;
-
- if (!port->interrupt_in_urb) {
- dev_err(&port->dev, "no interrupt urb\n");
- return -ENODEV;
- }
-
- mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
- if (!mxport)
- return -ENOMEM;
-
- spin_lock_init(&mxport->spinlock);
- mutex_init(&mxport->mutex);
-
- mxdev = usb_get_serial_data(port->serial);
-
- switch (mxdev->mxd_model) {
- case MXU1_1110_PRODUCT_ID:
- case MXU1_1150_PRODUCT_ID:
- case MXU1_1151_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_232;
- break;
- case MXU1_1130_PRODUCT_ID:
- case MXU1_1131_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
- break;
- }
-
- usb_set_serial_port_data(port, mxport);
-
- port->port.closing_wait =
- msecs_to_jiffies(MXU1_DEFAULT_CLOSING_WAIT * 10);
- port->port.drain_delay = 1;
-
- return 0;
-}
-
-static int mxu1_port_remove(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
-
- mxport = usb_get_serial_port_data(port);
- kfree(mxport);
-
- return 0;
-}
-
-static int mxu1_startup(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
- struct usb_device *dev = serial->dev;
- struct usb_host_interface *cur_altsetting;
- char fw_name[32];
- const struct firmware *fw_p = NULL;
- int err;
-
- dev_dbg(&serial->interface->dev, "%s - product 0x%04X, num configurations %d, configuration value %d\n",
- __func__, le16_to_cpu(dev->descriptor.idProduct),
- dev->descriptor.bNumConfigurations,
- dev->actconfig->desc.bConfigurationValue);
-
- /* create device structure */
- mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
- if (!mxdev)
- return -ENOMEM;
-
- usb_set_serial_data(serial, mxdev);
-
- mxdev->mxd_model = le16_to_cpu(dev->descriptor.idProduct);
-
- cur_altsetting = serial->interface->cur_altsetting;
-
- /* if we have only 1 configuration, download firmware */
- if (cur_altsetting->desc.bNumEndpoints == 1) {
-
- snprintf(fw_name,
- sizeof(fw_name),
- "moxa/moxa-%04x.fw",
- mxdev->mxd_model);
-
- err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
- if (err) {
- dev_err(&serial->interface->dev, "failed to request firmware: %d\n",
- err);
- goto err_free_mxdev;
- }
-
- err = mxu1_download_firmware(serial, fw_p);
- if (err)
- goto err_release_firmware;
-
- /* device is being reset */
- err = -ENODEV;
- goto err_release_firmware;
- }
-
- return 0;
-
-err_release_firmware:
- release_firmware(fw_p);
-err_free_mxdev:
- kfree(mxdev);
-
- return err;
-}
-
-static void mxu1_release(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
-
- mxdev = usb_get_serial_data(serial);
- kfree(mxdev);
-}
-
-static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
- u8 mask, u8 byte)
-{
- int status;
- size_t size;
- struct mxu1_write_data_bytes *data;
-
- dev_dbg(&port->dev, "%s - addr 0x%08X, mask 0x%02X, byte 0x%02X\n",
- __func__, addr, mask, byte);
-
- size = sizeof(struct mxu1_write_data_bytes) + 2;
- data = kzalloc(size, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
- data->bDataType = MXU1_RW_DATA_BYTE;
- data->bDataCounter = 1;
- data->wBaseAddrHi = cpu_to_be16(addr >> 16);
- data->wBaseAddrLo = cpu_to_be16(addr);
- data->bData[0] = mask;
- data->bData[1] = byte;
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_WRITE_DATA, 0,
- MXU1_RAM_PORT, data, size);
- if (status < 0)
- dev_err(&port->dev, "%s - failed: %d\n", __func__, status);
-
- kfree(data);
-
- return status;
-}
-
-static int mxu1_set_mcr(struct usb_serial_port *port, unsigned int mcr)
-{
- int status;
-
- status = mxu1_write_byte(port,
- MXU1_UART_BASE_ADDR + MXU1_UART_OFFSET_MCR,
- MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
- mcr);
- return status;
-}
-
-static void mxu1_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct mxu1_uart_config *config;
- tcflag_t cflag, iflag;
- speed_t baud;
- int status;
- unsigned int mcr;
-
- cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
-
- if (old_termios &&
- !tty_termios_hw_change(&tty->termios, old_termios) &&
- tty->termios.c_iflag == old_termios->c_iflag) {
- dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
- return;
- }
-
- dev_dbg(&port->dev,
- "%s - cflag 0x%08x, iflag 0x%08x\n", __func__, cflag, iflag);
-
- if (old_termios) {
- dev_dbg(&port->dev, "%s - old cflag 0x%08x, old iflag 0x%08x\n",
- __func__,
- old_termios->c_cflag,
- old_termios->c_iflag);
- }
-
- config = kzalloc(sizeof(*config), GFP_KERNEL);
- if (!config)
- return;
-
- /* these flags must be set */
- config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
- config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
- if (mxport->send_break)
- config->wFlags |= MXU1_UART_SEND_BREAK_SIGNAL;
- config->bUartMode = mxport->uart_mode;
-
- switch (C_CSIZE(tty)) {
- case CS5:
- config->bDataBits = MXU1_UART_5_DATA_BITS;
- break;
- case CS6:
- config->bDataBits = MXU1_UART_6_DATA_BITS;
- break;
- case CS7:
- config->bDataBits = MXU1_UART_7_DATA_BITS;
- break;
- default:
- case CS8:
- config->bDataBits = MXU1_UART_8_DATA_BITS;
- break;
- }
-
- if (C_PARENB(tty)) {
- config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
- if (C_CMSPAR(tty)) {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_MARK_PARITY;
- else
- config->bParity = MXU1_UART_SPACE_PARITY;
- } else {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_ODD_PARITY;
- else
- config->bParity = MXU1_UART_EVEN_PARITY;
- }
- } else {
- config->bParity = MXU1_UART_NO_PARITY;
- }
-
- if (C_CSTOPB(tty))
- config->bStopBits = MXU1_UART_2_STOP_BITS;
- else
- config->bStopBits = MXU1_UART_1_STOP_BITS;
-
- if (C_CRTSCTS(tty)) {
- /* RTS flow control must be off to drop RTS for baud rate B0 */
- if (C_BAUD(tty) != B0)
- config->wFlags |= MXU1_UART_ENABLE_RTS_IN;
- config->wFlags |= MXU1_UART_ENABLE_CTS_OUT;
- }
-
- if (I_IXOFF(tty) || I_IXON(tty)) {
- config->cXon = START_CHAR(tty);
- config->cXoff = STOP_CHAR(tty);
-
- if (I_IXOFF(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_IN;
-
- if (I_IXON(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_OUT;
- }
-
- baud = tty_get_baud_rate(tty);
- if (!baud)
- baud = 9600;
- config->wBaudRate = MXU1_BAUD_BASE / baud;
-
- dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
- __func__, baud, config->wBaudRate, config->wFlags,
- config->bDataBits, config->bParity, config->bStopBits,
- config->cXon, config->cXoff, config->bUartMode);
-
- cpu_to_be16s(&config->wBaudRate);
- cpu_to_be16s(&config->wFlags);
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_SET_CONFIG, 0,
- MXU1_UART1_PORT, config,
- sizeof(*config));
- if (status)
- dev_err(&port->dev, "cannot set config: %d\n", status);
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (C_BAUD(tty) == B0)
- mcr &= ~(MXU1_MCR_DTR | MXU1_MCR_RTS);
- else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
- mcr |= MXU1_MCR_DTR | MXU1_MCR_RTS;
-
- status = mxu1_set_mcr(port, mcr);
- if (status)
- dev_err(&port->dev, "cannot set modem control: %d\n", status);
- else
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- kfree(config);
-}
-
-static int mxu1_get_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *ret_arg)
-{
- struct serial_struct ret_serial;
- unsigned cwait;
-
- if (!ret_arg)
- return -EFAULT;
-
- cwait = port->port.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = jiffies_to_msecs(cwait) / 10;
-
- memset(&ret_serial, 0, sizeof(ret_serial));
-
- ret_serial.type = PORT_16550A;
- ret_serial.line = port->minor;
- ret_serial.port = 0;
- ret_serial.xmit_fifo_size = port->bulk_out_size;
- ret_serial.baud_base = MXU1_BAUD_BASE;
- ret_serial.close_delay = 5*HZ;
- ret_serial.closing_wait = cwait;
-
- if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int mxu1_set_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *new_arg)
-{
- struct serial_struct new_serial;
- unsigned cwait;
-
- if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
- return -EFAULT;
-
- cwait = new_serial.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
-
- port->port.closing_wait = cwait;
-
- return 0;
-}
-
-static int mxu1_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
-
- switch (cmd) {
- case TIOCGSERIAL:
- return mxu1_get_serial_info(port,
- (struct serial_struct __user *)arg);
- case TIOCSSERIAL:
- return mxu1_set_serial_info(port,
- (struct serial_struct __user *)arg);
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int mxu1_tiocmget(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- unsigned int result;
- unsigned int msr;
- unsigned int mcr;
- unsigned long flags;
-
- mutex_lock(&mxport->mutex);
- spin_lock_irqsave(&mxport->spinlock, flags);
-
- msr = mxport->msr;
- mcr = mxport->mcr;
-
- spin_unlock_irqrestore(&mxport->spinlock, flags);
- mutex_unlock(&mxport->mutex);
-
- result = ((mcr & MXU1_MCR_DTR) ? TIOCM_DTR : 0) |
- ((mcr & MXU1_MCR_RTS) ? TIOCM_RTS : 0) |
- ((mcr & MXU1_MCR_LOOP) ? TIOCM_LOOP : 0) |
- ((msr & MXU1_MSR_CTS) ? TIOCM_CTS : 0) |
- ((msr & MXU1_MSR_CD) ? TIOCM_CAR : 0) |
- ((msr & MXU1_MSR_RI) ? TIOCM_RI : 0) |
- ((msr & MXU1_MSR_DSR) ? TIOCM_DSR : 0);
-
- dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
-
- return result;
-}
-
-static int mxu1_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- int err;
- unsigned int mcr;
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (set & TIOCM_RTS)
- mcr |= MXU1_MCR_RTS;
- if (set & TIOCM_DTR)
- mcr |= MXU1_MCR_DTR;
- if (set & TIOCM_LOOP)
- mcr |= MXU1_MCR_LOOP;
-
- if (clear & TIOCM_RTS)
- mcr &= ~MXU1_MCR_RTS;
- if (clear & TIOCM_DTR)
- mcr &= ~MXU1_MCR_DTR;
- if (clear & TIOCM_LOOP)
- mcr &= ~MXU1_MCR_LOOP;
-
- err = mxu1_set_mcr(port, mcr);
- if (!err)
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- return err;
-}
-
-static void mxu1_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
-
- if (break_state == -1)
- mxport->send_break = true;
- else
- mxport->send_break = false;
-
- mxu1_set_termios(tty, port, NULL);
-}
-
-static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
- int status;
- u16 open_settings;
-
- open_settings = (MXU1_PIPE_MODE_CONTINUOUS |
- MXU1_PIPE_TIMEOUT_ENABLE |
- (MXU1_TRANSFER_TIMEOUT << 2));
-
- mxport->msr = 0;
-
- status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (status) {
- dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
- status);
- return status;
- }
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_INPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear input buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_OUTPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear output buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- /*
- * reset the data toggle on the bulk endpoints to work around bug in
- * host controllers where things get out of sync some times
- */
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = usb_serial_generic_open(tty, port);
- if (status)
- goto unlink_int_urb;
-
- return 0;
-
-unlink_int_urb:
- usb_kill_urb(port->interrupt_in_urb);
-
- return status;
-}
-
-static void mxu1_close(struct usb_serial_port *port)
-{
- int status;
-
- usb_serial_generic_close(port);
- usb_kill_urb(port->interrupt_in_urb);
-
- status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "failed to send close port command: %d\n",
- status);
- }
-}
-
-static void mxu1_handle_new_msr(struct usb_serial_port *port, u8 msr)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct async_icount *icount;
- unsigned long flags;
-
- dev_dbg(&port->dev, "%s - msr 0x%02X\n", __func__, msr);
-
- spin_lock_irqsave(&mxport->spinlock, flags);
- mxport->msr = msr & MXU1_MSR_MASK;
- spin_unlock_irqrestore(&mxport->spinlock, flags);
-
- if (msr & MXU1_MSR_DELTA_MASK) {
- icount = &port->icount;
- if (msr & MXU1_MSR_DELTA_CTS)
- icount->cts++;
- if (msr & MXU1_MSR_DELTA_DSR)
- icount->dsr++;
- if (msr & MXU1_MSR_DELTA_CD)
- icount->dcd++;
- if (msr & MXU1_MSR_DELTA_RI)
- icount->rng++;
-
- wake_up_interruptible(&port->port.delta_msr_wait);
- }
-}
-
-static void mxu1_interrupt_callback(struct urb *urb)
-{
- struct usb_serial_port *port = urb->context;
- unsigned char *data = urb->transfer_buffer;
- int length = urb->actual_length;
- int function;
- int status;
- u8 msr;
-
- switch (urb->status) {
- case 0:
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&port->dev, "%s - urb shutting down: %d\n",
- __func__, urb->status);
- return;
- default:
- dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
- __func__, urb->status);
- goto exit;
- }
-
- if (length != 2) {
- dev_dbg(&port->dev, "%s - bad packet size: %d\n",
- __func__, length);
- goto exit;
- }
-
- if (data[0] == MXU1_CODE_HARDWARE_ERROR) {
- dev_err(&port->dev, "hardware error: %d\n", data[1]);
- goto exit;
- }
-
- function = mxu1_get_func_from_code(data[0]);
-
- dev_dbg(&port->dev, "%s - function %d, data 0x%02X\n",
- __func__, function, data[1]);
-
- switch (function) {
- case MXU1_CODE_DATA_ERROR:
- dev_dbg(&port->dev, "%s - DATA ERROR, data 0x%02X\n",
- __func__, data[1]);
- break;
-
- case MXU1_CODE_MODEM_STATUS:
- msr = data[1];
- mxu1_handle_new_msr(port, msr);
- break;
-
- default:
- dev_err(&port->dev, "unknown interrupt code: 0x%02X\n",
- data[1]);
- break;
- }
-
-exit:
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
- dev_err(&port->dev, "resubmit interrupt urb failed: %d\n",
- status);
- }
-}
-
-static struct usb_serial_driver mxu11x0_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "mxu11x0",
- },
- .description = "MOXA UPort 11x0",
- .id_table = mxu1_idtable,
- .num_ports = 1,
- .port_probe = mxu1_port_probe,
- .port_remove = mxu1_port_remove,
- .attach = mxu1_startup,
- .release = mxu1_release,
- .open = mxu1_open,
- .close = mxu1_close,
- .ioctl = mxu1_ioctl,
- .set_termios = mxu1_set_termios,
- .tiocmget = mxu1_tiocmget,
- .tiocmset = mxu1_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
- .get_icount = usb_serial_generic_get_icount,
- .break_ctl = mxu1_break,
- .read_int_callback = mxu1_interrupt_callback,
-};
-
-static struct usb_serial_driver *const serial_drivers[] = {
- &mxu11x0_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, mxu1_idtable);
-
-MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
-MODULE_DESCRIPTION("MOXA UPort 11x0 USB to Serial Hub Driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("moxa/moxa-1110.fw");
-MODULE_FIRMWARE("moxa/moxa-1130.fw");
-MODULE_FIRMWARE("moxa/moxa-1131.fw");
-MODULE_FIRMWARE("moxa/moxa-1150.fw");
-MODULE_FIRMWARE("moxa/moxa-1151.fw");