summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/spcp8x5.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/spcp8x5.c')
-rw-r--r--drivers/usb/serial/spcp8x5.c85
1 files changed, 31 insertions, 54 deletions
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528cc81a8..8f7ed8f13996 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
}
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ if (priv->line_status & MSR_STATUS_LINE_DCD)
+ return 1;
+ return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control = MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS;
+ else
+ priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
/* close the serial port. We should wait for data sending to device 1st and
* then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
int result;
dbg("%s - port %d", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = SPCP8x5_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (ringbuf_avail_data(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current))
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
-
/* clear out any remaining data in the buffer */
clear_ringbuf(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device (this is long enough
- * for the entire all byte spcp8x5 hardware buffer to drain with no
- * flow control for data rates of 1200 bps or more, for lower rates we
- * should really know how much data is in the buffer to compute a delay
- * that is not unnecessarily long) */
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560) / bps, HZ/10);
- else
- timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
-
- /* clear control lines */
- if (tty) {
- c_cflag = tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
- }
- }
-
/* kill urb */
if (port->write_urb != NULL) {
result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
if (ret)
return ret;
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios->c_cflag & CBAUD))
- priv->line_control = MCR_DTR | MCR_RTS;
- else
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
-
spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
/* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
port->read_urb->dev = serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret) {
- spcp8x5_close(tty, port, NULL);
+ spcp8x5_close(port);
return -EPROTO;
}
+ port->port.drain_delay = 256;
return 0;
}
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
.num_ports = 1,
.open = spcp8x5_open,
.close = spcp8x5_close,
+ .dtr_rts = spcp8x5_dtr_rts,
+ .carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
.ioctl = spcp8x5_ioctl,