diff options
Diffstat (limited to 'drivers/usb')
29 files changed, 180 insertions, 102 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index cd4f96354fa8..8d4d46f3fd16 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -502,6 +502,13 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_init_termios; + /* + * Suppress initial echoing for some devices which might send data + * immediately after acm driver has been installed. + */ + if (acm->quirks & DISABLE_ECHO) + tty->termios.c_lflag &= ~ECHO; + tty->driver_data = acm; return 0; @@ -1620,6 +1627,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */ + .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */ + }, { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, @@ -1818,6 +1828,13 @@ static const struct usb_device_id acm_ids[] = { .driver_info = IGNORE_DEVICE, }, + { USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */ + .driver_info = SEND_ZERO_PACKET, + }, + { USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */ + .driver_info = SEND_ZERO_PACKET, + }, + /* control interfaces without any protocol set */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_PROTO_NONE) }, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index b30ac5fcde68..1ad9ff9f493d 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -134,3 +134,4 @@ struct acm { #define QUIRK_CONTROL_LINE_STATE BIT(6) #define CLEAR_HALT_CONDITIONS BIT(7) #define SEND_ZERO_PACKET BIT(8) +#define DISABLE_ECHO BIT(9) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 5e6136d2ed71..c6578b321838 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -763,18 +763,21 @@ void usb_destroy_configuration(struct usb_device *dev) return; if (dev->rawdescriptors) { - for (i = 0; i < dev->descriptor.bNumConfigurations; i++) + for (i = 0; i < dev->descriptor.bNumConfigurations && + i < USB_MAXCONFIG; i++) kfree(dev->rawdescriptors[i]); kfree(dev->rawdescriptors); dev->rawdescriptors = NULL; } - for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { + for (c = 0; c < dev->descriptor.bNumConfigurations && + c < USB_MAXCONFIG; c++) { struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - for (i = 0; i < cf->desc.bNumInterfaces; i++) { + for (i = 0; i < cf->desc.bNumInterfaces && + i < USB_MAXINTERFACES; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, usb_release_interface_cache); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e3414391f1e6..92aadb9c1883 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1109,6 +1109,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_ENABLE); } + /* + * Add debounce if USB3 link is in polling/link training state. + * Link will automatically transition to Enabled state after + * link training completes. + */ + if (hub_is_superspeed(hdev) && + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_POLLING)) + need_debounce_delay = true; + /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; @@ -2230,7 +2240,7 @@ static int usb_enumerate_device_otg(struct usb_device *udev) /* descriptor may appear anywhere in config */ err = __usb_get_extra_descriptor(udev->rawdescriptors[0], le16_to_cpu(udev->config[0].desc.wTotalLength), - USB_DT_OTG, (void **) &desc); + USB_DT_OTG, (void **) &desc, sizeof(*desc)); if (err || !(desc->bmAttributes & USB_OTG_HNP)) return 0; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 808437c5ec49..733479ddf8a7 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -188,6 +188,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Midiman M-Audio Keystation 88es */ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* SanDisk Ultra Fit and Ultra Flair */ + { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -236,7 +240,8 @@ static const struct usb_device_id usb_quirk_list[] = { USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, /* Corsair K70 RGB */ - { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair Strafe */ { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 45981e7b278b..4098783f9ee3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -696,14 +696,14 @@ EXPORT_SYMBOL_GPL(usb_get_current_frame_number); */ int __usb_get_extra_descriptor(char *buffer, unsigned size, - unsigned char type, void **ptr) + unsigned char type, void **ptr, size_t minsize) { struct usb_descriptor_header *header; while (size >= sizeof(struct usb_descriptor_header)) { header = (struct usb_descriptor_header *)buffer; - if (header->bLength < 2) { + if (header->bLength < 2 || header->bLength > size) { printk(KERN_ERR "%s: bogus descriptor, type %d length %d\n", usbcore_name, @@ -712,7 +712,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, return -1; } - if (header->bDescriptorType == type) { + if (header->bDescriptorType == type && header->bLength >= minsize) { *ptr = header; return 0; } diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 984d6aae7529..0e5435330c07 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5202,7 +5202,6 @@ error3: error2: usb_put_hcd(hcd); error1: - kfree(hsotg->core_params); #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS kfree(hsotg->last_frame_num_array); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 31a07649d99f..599b096dd6cc 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1796,6 +1796,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; + dwc->link_state = DWC3_LINK_STATE_SS_DIS; dwc3_ep0_out_start(dwc); dwc3_gadget_enable_irq(dwc); @@ -3223,6 +3224,8 @@ int dwc3_gadget_suspend(struct dwc3 *dwc) dwc3_disconnect_gadget(dwc); __dwc3_gadget_stop(dwc); + synchronize_irq(dwc->irq_gadget); + return 0; } diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c index 8784fa12ea2c..6e9d958004a0 100644 --- a/drivers/usb/gadget/function/f_sourcesink.c +++ b/drivers/usb/gadget/function/f_sourcesink.c @@ -842,7 +842,7 @@ static struct usb_function *source_sink_alloc_func( ss = kzalloc(sizeof(*ss), GFP_KERNEL); if (!ss) - return NULL; + return ERR_PTR(-ENOMEM); ss_opts = container_of(fi, struct f_ss_opts, func_inst); diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 7c6113432093..40396a265a3f 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -2096,7 +2096,7 @@ static irqreturn_t net2272_irq(int irq, void *_dev) #if defined(PLX_PCI_RDK2) /* see if PCI int for us by checking irqstat */ intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); - if (!intcsr & (1 << NET2272_PCI_IRQ)) { + if (!(intcsr & (1 << NET2272_PCI_IRQ))) { spin_unlock(&dev->lock); return IRQ_NONE; } diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index a8709f9e5648..9eed4947aad8 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2037,6 +2037,7 @@ static inline int machine_without_vbus_sense(void) { return machine_is_omap_innovator() || machine_is_omap_osk() + || machine_is_omap_palmte() || machine_is_sx1() /* No known omap7xx boards with vbus sense */ || cpu_is_omap7xx(); @@ -2045,7 +2046,7 @@ static inline int machine_without_vbus_sense(void) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { - int status = -ENODEV; + int status; struct omap_ep *ep; unsigned long flags; @@ -2083,6 +2084,7 @@ static int omap_udc_start(struct usb_gadget *g, goto done; } } else { + status = 0; if (can_pullup(udc)) pullup_enable(udc); else @@ -2612,9 +2614,22 @@ omap_ep_setup(char *name, u8 addr, u8 type, static void omap_udc_release(struct device *dev) { - complete(udc->done); + pullup_disable(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); + udc->transceiver = NULL; + } + omap_writew(0, UDC_SYSCON1); + remove_proc_file(); + if (udc->dc_clk) { + if (udc->clk_requested) + omap_udc_enable_clock(0); + clk_put(udc->hhc_clk); + clk_put(udc->dc_clk); + } + if (udc->done) + complete(udc->done); kfree(udc); - udc = NULL; } static int @@ -2886,8 +2901,8 @@ bad_on_1710: udc->clr_halt = UDC_RESET_EP; /* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, - 0, driver_name, udc); + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2895,20 +2910,20 @@ bad_on_1710: } /* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - 0, "omap_udc pio", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); - goto cleanup2; + goto cleanup1; } #ifdef USE_ISO - status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - 0, "omap_udc iso", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); - goto cleanup3; + goto cleanup1; } #endif if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -2919,23 +2934,8 @@ bad_on_1710: } create_proc_file(); - status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, - omap_udc_release); - if (status) - goto cleanup4; - - return 0; - -cleanup4: - remove_proc_file(); - -#ifdef USE_ISO -cleanup3: - free_irq(pdev->resource[2].start, udc); -#endif - -cleanup2: - free_irq(pdev->resource[1].start, udc); + return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release); cleanup1: kfree(udc); @@ -2962,42 +2962,15 @@ static int omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done); - if (!udc) - return -ENODEV; - - usb_del_gadget_udc(&udc->gadget); - if (udc->driver) - return -EBUSY; - udc->done = &done; - pullup_disable(udc); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - usb_put_phy(udc->transceiver); - udc->transceiver = NULL; - } - omap_writew(0, UDC_SYSCON1); - - remove_proc_file(); - -#ifdef USE_ISO - free_irq(pdev->resource[3].start, udc); -#endif - free_irq(pdev->resource[2].start, udc); - free_irq(pdev->resource[1].start, udc); + usb_del_gadget_udc(&udc->gadget); - if (udc->dc_clk) { - if (udc->clk_requested) - omap_udc_enable_clock(0); - clk_put(udc->hhc_clk); - clk_put(udc->dc_clk); - } + wait_for_completion(&done); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); - wait_for_completion(&done); - return 0; } diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 1db0626c8bf4..97750f162f01 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -654,7 +654,7 @@ static int hwahc_security_create(struct hwahc *hwahc) top = itr + itr_size; result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd); + USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); if (result == -1) { dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); return 0; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 7bf78be1fd32..72c3ed76a77d 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1990,6 +1990,8 @@ static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, static void r8a66597_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) +__acquires(r8a66597->lock) +__releases(r8a66597->lock) { struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv; @@ -2002,13 +2004,14 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd, return; pipenum = pipe->info.pipenum; + spin_lock_irqsave(&r8a66597->lock, flags); if (pipenum == 0) { kfree(hep->hcpriv); hep->hcpriv = NULL; + spin_unlock_irqrestore(&r8a66597->lock, flags); return; } - spin_lock_irqsave(&r8a66597->lock, flags); pipe_stop(r8a66597, pipe); pipe_irq_disable(r8a66597, pipenum); disable_irq_empty(r8a66597, pipenum); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5334c4c243ef..03fe5e26fd07 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1473,7 +1473,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd) portsc_buf[port_index] = 0; /* Bail out if a USB3 port has a new device in link training */ - if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) { + if ((hcd->speed >= HCD_USB3) && + (t1 & PORT_PLS_MASK) == XDEV_POLLING) { bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dbf7bd4582e1..7c95779c7a0e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4416,6 +4416,14 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + /* Prevent U1 if service interval is shorter than U1 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); else @@ -4472,6 +4480,14 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + /* Prevent U2 if service interval is shorter than U2 exit latency */ + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { + if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); + return USB3_LPM_DISABLED; + } + } + if (xhci->quirks & XHCI_INTEL_HOST) timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); else diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 2d3c656e0bff..b8092bcf89a2 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -64,6 +64,7 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, { APPLEDISPLAY_DEVICE(0x9222) }, + { APPLEDISPLAY_DEVICE(0x9226) }, { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f1219f6d58a9..60540a8ac431 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -477,13 +477,10 @@ void musb_g_tx(struct musb *musb, u8 epnum) } if (request) { - u8 is_dma = 0; - bool short_packet = false; trace_musb_req_tx(req); if (dma && (csr & MUSB_TXCSR_DMAENAB)) { - is_dma = 1; csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET); @@ -501,16 +498,8 @@ void musb_g_tx(struct musb *musb, u8 epnum) */ if ((request->zero && request->length) && (request->length % musb_ep->packet_sz == 0) - && (request->actual == request->length)) - short_packet = true; + && (request->actual == request->length)) { - if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) && - (is_dma && (!dma->desired_mode || - (request->actual & - (musb_ep->packet_sz - 1))))) - short_packet = true; - - if (short_packet) { /* * On DMA completion, FIFO may not be * available yet... diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 3620073da58c..512108e22d2b 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -320,12 +320,10 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) channel->status = MUSB_DMA_STATUS_FREE; /* completed */ - if ((devctl & MUSB_DEVCTL_HM) - && (musb_channel->transmit) - && ((channel->desired_mode == 0) - || (channel->actual_len & - (musb_channel->max_packet_sz - 1))) - ) { + if (musb_channel->transmit && + (!channel->desired_mode || + (channel->actual_len % + musb_channel->max_packet_sz))) { u8 epnum = musb_channel->epnum; int offset = musb->io.ep_offset(epnum, MUSB_TXCSR); @@ -337,11 +335,14 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) */ musb_ep_select(mbase, epnum); txcsr = musb_readw(mbase, offset); - txcsr &= ~(MUSB_TXCSR_DMAENAB + if (channel->desired_mode == 1) { + txcsr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_AUTOSET); - musb_writew(mbase, offset, txcsr); - /* Send out the packet */ - txcsr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, txcsr); + /* Send out the packet */ + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_DMAENAB; + } txcsr |= MUSB_TXCSR_TXPKTRDY; musb_writew(mbase, offset, txcsr); } diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2c60f0cab568..20bcb2cf6a76 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -20,7 +20,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y' select USB_PHY help diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 7e5aece769da..cb1382a52765 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -60,9 +60,6 @@ static int am335x_phy_probe(struct platform_device *pdev) if (ret) return ret; - ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy); - if (ret) - return ret; am_phy->usb_phy_gen.phy.init = am335x_init; am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown; @@ -81,7 +78,7 @@ static int am335x_phy_probe(struct platform_device *pdev) device_set_wakeup_enable(dev, false); phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false); - return 0; + return usb_add_phy_dev(&am_phy->usb_phy_gen.phy); } static int am335x_phy_remove(struct platform_device *pdev) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c2b120021443..7bbf2ca73f68 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -58,6 +58,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 2e2f736384ab..b88a72220acd 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1020,6 +1020,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, + /* EZPrototypes devices */ + { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 76a10b222ff9..ddf5ab983dc9 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1308,6 +1308,12 @@ #define IONICS_PLUGCOMPUTER_PID 0x0102 /* + * EZPrototypes (PID reseller) + */ +#define EZPROTOTYPES_VID 0x1c40 +#define HJELMSLUND_USB485_ISO_PID 0x0477 + +/* * Dresden Elektronik Sensor Terminal Board */ #define DE_VID 0x1cf1 /* Vendor ID */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2b81939fecd7..b2b7c12e5c86 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1147,6 +1147,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */ + .driver_info = NCTRL(0) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), @@ -1163,6 +1165,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */ + .driver_info = NCTRL(0) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, @@ -1327,6 +1333,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) }, /* GosunCn ZTE WeLink ME3630 (MBIM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), @@ -1530,6 +1537,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ .driver_info = RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, @@ -1757,6 +1765,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E), .driver_info = RSVD(5) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), @@ -1941,7 +1950,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) }, /* HP lt4132 (Huawei ME906s-158) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, + { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ + .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, + { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ + .driver_info = RSVD(6) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3da25ad267a2..9706d214c409 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -47,6 +47,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, @@ -86,9 +87,14 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 123289085ee2..d84c3b3d477b 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -13,6 +13,7 @@ #define PL2303_VENDOR_ID 0x067b #define PL2303_PRODUCT_ID 0x2303 +#define PL2303_PRODUCT_ID_TB 0x2304 #define PL2303_PRODUCT_ID_RSAQ2 0x04bb #define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 @@ -25,6 +26,7 @@ #define PL2303_PRODUCT_ID_MOTOROLA 0x0307 #define PL2303_PRODUCT_ID_ZTEK 0xe1f1 + #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 @@ -123,10 +125,15 @@ /* Hewlett-Packard POS Pole Displays */ #define HP_VENDOR_ID 0x03f0 +#define HP_LM920_PRODUCT_ID 0x026b +#define HP_TD620_PRODUCT_ID 0x0956 #define HP_LD960_PRODUCT_ID 0x0b39 #define HP_LCM220_PRODUCT_ID 0x3139 #define HP_LCM960_PRODUCT_ID 0x3239 #define HP_LD220_PRODUCT_ID 0x3524 +#define HP_LD220TA_PRODUCT_ID 0x4349 +#define HP_LD960TA_PRODUCT_ID 0x4439 +#define HP_LM940_PRODUCT_ID 0x5039 /* Cressi Edy (diving computer) PC interface */ #define CRESSI_VENDOR_ID 0x04b8 diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 6d6acf2c07c3..511242111403 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -88,7 +88,8 @@ DEVICE(moto_modem, MOTO_IDS); /* Motorola Tetra driver */ #define MOTOROLA_TETRA_IDS() \ { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ - { USB_DEVICE(0x0cad, 0x9012) } /* MTP6550 */ + { USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \ + { USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); /* Novatel Wireless GPS driver */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 344ec8631481..13f2c051dbf2 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -251,8 +251,12 @@ static int slave_configure(struct scsi_device *sdev) if (!(us->fflags & US_FL_NEEDS_CAP16)) sdev->try_rc_10_first = 1; - /* assume SPC3 or latter devices support sense size > 18 */ - if (sdev->scsi_level > SCSI_SPC_2) + /* + * assume SPC3 or latter devices support sense size > 18 + * unless US_FL_BAD_SENSE quirk is specified. + */ + if (sdev->scsi_level > SCSI_SPC_2 && + !(us->fflags & US_FL_BAD_SENSE)) us->fflags |= US_FL_SANE_SENSE; /* diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 0a86b3f3638e..c802aabcc58c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1285,6 +1285,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, US_FL_FIX_CAPACITY ), /* + * Reported by Icenowy Zheng <icenowy@aosc.io> + * The SMI SM3350 USB-UFS bridge controller will enter a wrong state + * that do not process read/write command if a long sense is requested, + * so force to use 18-byte sense. + */ +UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff, + "SMI", + "SM3350 UFS-to-USB-Mass-Storage bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), + +/* * Reported by Paul Hartman <paul.hartman+linux@gmail.com> * This card reader returns "Illegal Request, Logical Block Address * Out of Range" for the first READ(10) after a new card is inserted. |