diff options
Diffstat (limited to 'drivers/uwb/i1480/dfu/i1480-dfu.h')
| -rw-r--r-- | drivers/uwb/i1480/dfu/i1480-dfu.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h new file mode 100644 index 000000000000..46f45e800f36 --- /dev/null +++ b/drivers/uwb/i1480/dfu/i1480-dfu.h @@ -0,0 +1,260 @@ +/* + * i1480 Device Firmware Upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver is the firmware uploader for the Intel Wireless UWB + * Link 1480 device (both in the USB and PCI incarnations). + * + * The process is quite simple: we stop the device, write the firmware + * to its memory and then restart it. Wait for the device to let us + * know it is done booting firmware. Ready. + * + * We might have to upload before or after a phy firmware (which might + * be done in two methods, using a normal firmware image or through + * the MPI port). + * + * Because USB and PCI use common methods, we just make ops out of the + * common operations (read, write, wait_init_done and cmd) and + * implement them in usb.c and pci.c. + * + * The flow is (some parts omitted): + * + * i1480_{usb,pci}_probe() On enumerate/discovery + * i1480_fw_upload() + * i1480_pre_fw_upload() + * __mac_fw_upload() + * fw_hdrs_load() + * mac_fw_hdrs_push() + * i1480->write() [i1480_{usb,pci}_write()] + * i1480_fw_cmp() + * i1480->read() [i1480_{usb,pci}_read()] + * i1480_mac_fw_upload() + * __mac_fw_upload() + * i1480->setup(() + * i1480->wait_init_done() + * i1480_cmd_reset() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * ... + * i1480_phy_fw_upload() + * request_firmware() + * i1480_mpi_write() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * + * Once the probe function enumerates the device and uploads the + * firmware, we just exit with -ENODEV, as we don't really want to + * attach to the device. + */ +#ifndef __i1480_DFU_H__ +#define __i1480_DFU_H__ + +#include <linux/uwb/spec.h> +#include <linux/types.h> +#include <linux/completion.h> + +#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018)) + +#if i1480_FW > 0x00000302 +#define i1480_RCEB_EXTENDED +#endif + +struct uwb_rccb; +struct uwb_rceb; + +/* + * Common firmware upload handlers + * + * Normally you embed this struct in another one specific to your hw. + * + * @write Write to device's memory from buffer. + * @read Read from device's memory to i1480->evt_buf. + * @setup Setup device after basic firmware is uploaded + * @wait_init_done + * Wait for the device to send a notification saying init + * is done. + * @cmd FOP for issuing the command to the hardware. The + * command data is contained in i1480->cmd_buf and the size + * is supplied as an argument. The command replied is put + * in i1480->evt_buf and the size in i1480->evt_result (or if + * an error, a < 0 errno code). + * + * @cmd_buf Memory buffer used to send commands to the device. + * Allocated by the upper layers i1480_fw_upload(). + * Size has to be @buf_size. + * @evt_buf Memory buffer used to place the async notifications + * received by the hw. Allocated by the upper layers + * i1480_fw_upload(). + * Size has to be @buf_size. + * @cmd_complete + * Low level driver uses this to notify code waiting afor + * an event that the event has arrived and data is in + * i1480->evt_buf (and size/result in i1480->evt_result). + * @hw_rev + * Use this value to activate dfu code to support new revisions + * of hardware. i1480_init() sets this to a default value. + * It should be updated by the USB and PCI code. + */ +struct i1480 { + struct device *dev; + + int (*write)(struct i1480 *, u32 addr, const void *, size_t); + int (*read)(struct i1480 *, u32 addr, size_t); + int (*rc_setup)(struct i1480 *); + void (*rc_release)(struct i1480 *); + int (*wait_init_done)(struct i1480 *); + int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size); + const char *pre_fw_name; + const char *mac_fw_name; + const char *mac_fw_name_deprecate; /* FIXME: Will go away */ + const char *phy_fw_name; + u8 hw_rev; + + size_t buf_size; /* size of both evt_buf and cmd_buf */ + void *evt_buf, *cmd_buf; + ssize_t evt_result; + struct completion evt_complete; +}; + +static inline +void i1480_init(struct i1480 *i1480) +{ + i1480->hw_rev = 1; + init_completion(&i1480->evt_complete); +} + +extern int i1480_fw_upload(struct i1480 *); +extern int i1480_pre_fw_upload(struct i1480 *); +extern int i1480_mac_fw_upload(struct i1480 *); +extern int i1480_phy_fw_upload(struct i1480 *); +extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t); +extern int i1480_rceb_check(const struct i1480 *, + const struct uwb_rceb *, const char *, u8, + u8, unsigned); + +enum { + /* Vendor specific command type */ + i1480_CET_VS1 = 0xfd, + /* i1480 commands */ + i1480_CMD_SET_IP_MAS = 0x000e, + i1480_CMD_GET_MAC_PHY_INFO = 0x0003, + i1480_CMD_MPI_WRITE = 0x000f, + i1480_CMD_MPI_READ = 0x0010, + /* i1480 events */ +#if i1480_FW > 0x00000302 + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO, +#else + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM, +#endif +}; + + +struct i1480_evt_confirm { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; +} __attribute__((packed)); + + +struct i1480_rceb { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif +} __attribute__((packed)); + + +/** + * Get MAC & PHY Information confirm event structure + * + * Confirm event returned by the command. + */ +struct i1480_evt_confirm_GMPI { +#if i1480_FW > 0x00000302 + struct uwb_rceb rceb; + __le16 wParamLength; + __le16 status; + u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + u8 hw_rev; + u8 phy_vendor; + u8 phy_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps[3]; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#else + struct uwb_rceb rceb; + u8 status; + u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#endif +} __attribute__((packed)); + + +struct i1480_cmd_mpi_write { + struct uwb_rccb rccb; + __le16 size; + u8 data[]; +}; + + +struct i1480_cmd_mpi_read { + struct uwb_rccb rccb; + __le16 size; + struct { + u8 page, offset; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +struct i1480_evt_mpi_read { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; + __le16 size; + struct { + u8 page, offset, value; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +#endif /* #ifndef __i1480_DFU_H__ */ |