summaryrefslogtreecommitdiff
path: root/drivers/uwb/wlp/eda.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb/wlp/eda.c')
-rw-r--r--drivers/uwb/wlp/eda.c415
1 files changed, 0 insertions, 415 deletions
diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c
deleted file mode 100644
index 086fc0cf9401..000000000000
--- a/drivers/uwb/wlp/eda.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Ethernet to device address cache
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * We need to be able to map ethernet addresses to device addresses
- * and back because there is not explicit relationship between the eth
- * addresses used in the ETH frames and the device addresses (no, it
- * would not have been simpler to force as ETH address the MBOA MAC
- * address...no, not at all :).
- *
- * A device has one MBOA MAC address and one device address. It is possible
- * for a device to have more than one virtual MAC address (although a
- * virtual address can be the same as the MBOA MAC address). The device
- * address is guaranteed to be unique among the devices in the extended
- * beacon group (see ECMA 17.1.1). We thus use the device address as index
- * to this cache. We do allow searching based on virtual address as this
- * is how Ethernet frames will be addressed.
- *
- * We need to support virtual EUI-48. Although, right now the virtual
- * EUI-48 will always be the same as the MAC SAP address. The EDA cache
- * entry thus contains a MAC SAP address as well as the virtual address
- * (used to map the network stack address to a neighbor). When we move
- * to support more than one virtual MAC on a host then this organization
- * will have to change. Perhaps a neighbor has a list of WSSs, each with a
- * tag and virtual EUI-48.
- *
- * On data transmission
- * it is used to determine if the neighbor is connected and what WSS it
- * belongs to. With this we know what tag to add to the WLP frame. Storing
- * the WSS in the EDA cache may be overkill because we only support one
- * WSS. Hopefully we will support more than one WSS at some point.
- * On data reception it is used to determine the WSS based on
- * the tag and address of the transmitting neighbor.
- */
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/slab.h>
-#include <linux/wlp.h>
-#include "wlp-internal.h"
-
-
-/* FIXME: cache is not purged, only on device close */
-
-/* FIXME: does not scale, change to dynamic array */
-
-/*
- * Initialize the EDA cache
- *
- * @returns 0 if ok, < 0 errno code on error
- *
- * Call when the interface is being brought up
- *
- * NOTE: Keep it as a separate function as the implementation will
- * change and be more complex.
- */
-void wlp_eda_init(struct wlp_eda *eda)
-{
- INIT_LIST_HEAD(&eda->cache);
- spin_lock_init(&eda->lock);
-}
-
-/*
- * Release the EDA cache
- *
- * @returns 0 if ok, < 0 errno code on error
- *
- * Called when the interface is brought down
- */
-void wlp_eda_release(struct wlp_eda *eda)
-{
- unsigned long flags;
- struct wlp_eda_node *itr, *next;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry_safe(itr, next, &eda->cache, list_node) {
- list_del(&itr->list_node);
- kfree(itr);
- }
- spin_unlock_irqrestore(&eda->lock, flags);
-}
-
-/*
- * Add an address mapping
- *
- * @returns 0 if ok, < 0 errno code on error
- *
- * An address mapping is initially created when the neighbor device is seen
- * for the first time (it is "onair"). At this time the neighbor is not
- * connected or associated with a WSS so we only populate the Ethernet and
- * Device address fields.
- *
- */
-int wlp_eda_create_node(struct wlp_eda *eda,
- const unsigned char eth_addr[ETH_ALEN],
- const struct uwb_dev_addr *dev_addr)
-{
- int result = 0;
- struct wlp_eda_node *itr;
- unsigned long flags;
-
- BUG_ON(dev_addr == NULL || eth_addr == NULL);
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(itr, &eda->cache, list_node) {
- if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
- printk(KERN_ERR "EDA cache already contains entry "
- "for neighbor %02x:%02x\n",
- dev_addr->data[1], dev_addr->data[0]);
- result = -EEXIST;
- goto out_unlock;
- }
- }
- itr = kzalloc(sizeof(*itr), GFP_ATOMIC);
- if (itr != NULL) {
- memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr));
- itr->dev_addr = *dev_addr;
- list_add(&itr->list_node, &eda->cache);
- } else
- result = -ENOMEM;
-out_unlock:
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-/*
- * Remove entry from EDA cache
- *
- * This is done when the device goes off air.
- */
-void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr)
-{
- struct wlp_eda_node *itr, *next;
- unsigned long flags;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry_safe(itr, next, &eda->cache, list_node) {
- if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
- list_del(&itr->list_node);
- kfree(itr);
- break;
- }
- }
- spin_unlock_irqrestore(&eda->lock, flags);
-}
-
-/*
- * Update an address mapping
- *
- * @returns 0 if ok, < 0 errno code on error
- */
-int wlp_eda_update_node(struct wlp_eda *eda,
- const struct uwb_dev_addr *dev_addr,
- struct wlp_wss *wss,
- const unsigned char virt_addr[ETH_ALEN],
- const u8 tag, const enum wlp_wss_connect state)
-{
- int result = -ENOENT;
- struct wlp_eda_node *itr;
- unsigned long flags;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(itr, &eda->cache, list_node) {
- if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
- /* Found it, update it */
- itr->wss = wss;
- memcpy(itr->virt_addr, virt_addr,
- sizeof(itr->virt_addr));
- itr->tag = tag;
- itr->state = state;
- result = 0;
- goto out_unlock;
- }
- }
- /* Not found */
-out_unlock:
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-/*
- * Update only state field of an address mapping
- *
- * @returns 0 if ok, < 0 errno code on error
- */
-int wlp_eda_update_node_state(struct wlp_eda *eda,
- const struct uwb_dev_addr *dev_addr,
- const enum wlp_wss_connect state)
-{
- int result = -ENOENT;
- struct wlp_eda_node *itr;
- unsigned long flags;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(itr, &eda->cache, list_node) {
- if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
- /* Found it, update it */
- itr->state = state;
- result = 0;
- goto out_unlock;
- }
- }
- /* Not found */
-out_unlock:
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-/*
- * Return contents of EDA cache entry
- *
- * @dev_addr: index to EDA cache
- * @eda_entry: pointer to where contents of EDA cache will be copied
- */
-int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr,
- struct wlp_eda_node *eda_entry)
-{
- int result = -ENOENT;
- struct wlp_eda_node *itr;
- unsigned long flags;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(itr, &eda->cache, list_node) {
- if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
- *eda_entry = *itr;
- result = 0;
- goto out_unlock;
- }
- }
- /* Not found */
-out_unlock:
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-/*
- * Execute function for every element in the cache
- *
- * @function: function to execute on element of cache (must be atomic)
- * @priv: private data of function
- * @returns: result of first function that failed, or last function
- * executed if no function failed.
- *
- * Stop executing when function returns error for any element in cache.
- *
- * IMPORTANT: We are using a spinlock here: the function executed on each
- * element has to be atomic.
- */
-int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function,
- void *priv)
-{
- int result = 0;
- struct wlp *wlp = container_of(eda, struct wlp, eda);
- struct wlp_eda_node *entry;
- unsigned long flags;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(entry, &eda->cache, list_node) {
- result = (*function)(wlp, entry, priv);
- if (result < 0)
- break;
- }
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-/*
- * Execute function for single element in the cache (return dev addr)
- *
- * @virt_addr: index into EDA cache used to determine which element to
- * execute the function on
- * @dev_addr: device address of element in cache will be returned using
- * @dev_addr
- * @function: function to execute on element of cache (must be atomic)
- * @priv: private data of function
- * @returns: result of function
- *
- * IMPORTANT: We are using a spinlock here: the function executed on the
- * element has to be atomic.
- */
-int wlp_eda_for_virtual(struct wlp_eda *eda,
- const unsigned char virt_addr[ETH_ALEN],
- struct uwb_dev_addr *dev_addr,
- wlp_eda_for_each_f function,
- void *priv)
-{
- int result = 0;
- struct wlp *wlp = container_of(eda, struct wlp, eda);
- struct wlp_eda_node *itr;
- unsigned long flags;
- int found = 0;
-
- spin_lock_irqsave(&eda->lock, flags);
- list_for_each_entry(itr, &eda->cache, list_node) {
- if (!memcmp(itr->virt_addr, virt_addr,
- sizeof(itr->virt_addr))) {
- result = (*function)(wlp, itr, priv);
- *dev_addr = itr->dev_addr;
- found = 1;
- break;
- }
- }
- if (!found)
- result = -ENODEV;
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-
-static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED",
- "WLP_WSS_CONNECTED",
- "WLP_WSS_CONNECT_FAILED",
-};
-
-static const char *wlp_wss_connect_state_str(unsigned id)
-{
- if (id >= ARRAY_SIZE(__wlp_wss_connect_state))
- return "unknown WSS connection state";
- return __wlp_wss_connect_state[id];
-}
-
-/*
- * View EDA cache from user space
- *
- * A debugging feature to give user visibility into the EDA cache. Also
- * used to display members of WSS to user (called from wlp_wss_members_show())
- */
-ssize_t wlp_eda_show(struct wlp *wlp, char *buf)
-{
- ssize_t result = 0;
- struct wlp_eda_node *entry;
- unsigned long flags;
- struct wlp_eda *eda = &wlp->eda;
- spin_lock_irqsave(&eda->lock, flags);
- result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr "
- "tag state virt_addr\n");
- list_for_each_entry(entry, &eda->cache, list_node) {
- result += scnprintf(buf + result, PAGE_SIZE - result,
- "%pM %02x:%02x %p 0x%02x %s %pM\n",
- entry->eth_addr,
- entry->dev_addr.data[1],
- entry->dev_addr.data[0], entry->wss,
- entry->tag,
- wlp_wss_connect_state_str(entry->state),
- entry->virt_addr);
- if (result >= PAGE_SIZE)
- break;
- }
- spin_unlock_irqrestore(&eda->lock, flags);
- return result;
-}
-EXPORT_SYMBOL_GPL(wlp_eda_show);
-
-/*
- * Add new EDA cache entry based on user input in sysfs
- *
- * Should only be used for debugging.
- *
- * The WSS is assumed to be the only WSS supported. This needs to be
- * redesigned when we support more than one WSS.
- */
-ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size)
-{
- ssize_t result;
- struct wlp_eda *eda = &wlp->eda;
- u8 eth_addr[6];
- struct uwb_dev_addr dev_addr;
- u8 tag;
- unsigned state;
-
- result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx "
- "%02hhx:%02hhx %02hhx %u\n",
- &eth_addr[0], &eth_addr[1],
- &eth_addr[2], &eth_addr[3],
- &eth_addr[4], &eth_addr[5],
- &dev_addr.data[1], &dev_addr.data[0], &tag, &state);
- switch (result) {
- case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */
- /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/
- result = -ENOSYS;
- break;
- case 10:
- state = state >= 1 ? 1 : 0;
- result = wlp_eda_create_node(eda, eth_addr, &dev_addr);
- if (result < 0 && result != -EEXIST)
- goto error;
- /* Set virtual addr to be same as MAC */
- result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss,
- eth_addr, tag, state);
- if (result < 0)
- goto error;
- break;
- default: /* bad format */
- result = -EINVAL;
- }
-error:
- return result < 0 ? result : size;
-}
-EXPORT_SYMBOL_GPL(wlp_eda_store);