summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/cciss.c267
-rw-r--r--drivers/block/cciss.h109
-rw-r--r--drivers/block/cciss_cmd.h34
-rw-r--r--drivers/block/cciss_scsi.c6
4 files changed, 353 insertions, 63 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index cd830cb64a5d..08a2e619dc36 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -206,6 +206,11 @@ static void cciss_device_release(struct device *dev);
static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
+ int *bucket_map);
+static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
+
#ifdef CONFIG_PROC_FS
static void cciss_procinit(int i);
#else
@@ -231,6 +236,16 @@ static const struct block_device_operations cciss_fops = {
.revalidate_disk = cciss_revalidate,
};
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c)
+{
+ if (likely(h->transMethod == CFGTBL_Trans_Performant))
+ c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
@@ -261,6 +276,7 @@ static void enqueue_cmd_and_start_io(ctlr_info_t *h,
CommandList_struct *c)
{
unsigned long flags;
+ set_performant_mode(h, c);
spin_lock_irqsave(&h->lock, flags);
addQ(&h->reqQ, c);
h->Qdepth++;
@@ -350,6 +366,28 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
#ifdef CONFIG_PROC_FS
+static inline u32 next_command(ctlr_info_t *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
/*
* Report information about this controller.
*/
@@ -377,7 +415,7 @@ static void cciss_seq_show_header(struct seq_file *seq)
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
@@ -3126,13 +3164,13 @@ after_error_processing:
static inline u32 cciss_tag_contains_index(u32 tag)
{
-#define DIRECT_LOOKUP_BIT 0x04
+#define DIRECT_LOOKUP_BIT 0x10
return tag & DIRECT_LOOKUP_BIT;
}
static inline u32 cciss_tag_to_index(u32 tag)
{
-#define DIRECT_LOOKUP_SHIFT 3
+#define DIRECT_LOOKUP_SHIFT 5
return tag >> DIRECT_LOOKUP_SHIFT;
}
@@ -3262,9 +3300,12 @@ static void do_cciss_request(struct request_queue *q)
blk_rq_sectors(creq), seg, chained);
#endif /* CCISS_DEBUG */
- c->Header.SGList = c->Header.SGTotal = seg + chained;
- if (seg > h->max_cmd_sgentries)
+ c->Header.SGTotal = seg + chained;
+ if (seg <= h->max_cmd_sgentries)
+ c->Header.SGList = c->Header.SGTotal;
+ else
c->Header.SGList = h->max_cmd_sgentries;
+ set_performant_mode(h, c);
if (likely(blk_fs_request(creq))) {
if(h->cciss_read == CCISS_READ_10) {
@@ -3370,10 +3411,10 @@ static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
tag_index = cciss_tag_to_index(raw_tag);
if (bad_tag(h, tag_index, raw_tag))
- return get_next_completion(h);
+ return next_command(h);
c = h->cmd_pool + tag_index;
finish_cmd(h, c, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
/* process completion of a non-indexed command */
@@ -3390,11 +3431,11 @@ static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
tag_masked = cciss_tag_discard_error_bits(tag);
if (busaddr_masked == tag_masked) {
finish_cmd(h, c, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
}
bad_tag(h, h->nr_cmds + 1, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
static irqreturn_t do_cciss_intx(int irq, void *dev_id)
@@ -3700,6 +3741,155 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
return -1;
}
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers. The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands. This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes. The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void calc_bucket_map(int bucket[], int num_buckets,
+ int nsgs, int *bucket_map)
+{
+ int i, j, b, size;
+
+ /* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+ /* Note, bucket_map must have nsgs+1 entries. */
+ for (i = 0; i <= nsgs; i++) {
+ /* Compute size of a command with i SG entries */
+ size = i + MINIMUM_TRANSFER_BLOCKS;
+ b = num_buckets; /* Assume the biggest bucket */
+ /* Find the bucket that is just big enough */
+ for (j = 0; j < 8; j++) {
+ if (bucket[j] >= size) {
+ b = j;
+ break;
+ }
+ }
+ /* for a command with i SG entries, use bucket b. */
+ bucket_map[i] = b;
+ }
+}
+
+static void
+cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+{
+ int l = 0;
+ __u32 trans_support;
+ __u32 trans_offset;
+ /*
+ * 5 = 1 s/g entry or 4k
+ * 6 = 2 s/g entry or 8k
+ * 8 = 4 s/g entry or 16k
+ * 10 = 6 s/g entry or 24k
+ */
+ int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
+ unsigned long register_value;
+
+ BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
+
+ /* Attempt to put controller into performant mode if supported */
+ /* Does board support performant mode? */
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ printk(KERN_WARNING "cciss%d: Placing controller into "
+ "performant mode\n", h->ctlr);
+ /* Performant mode demands commands on a 32 byte boundary
+ * pci_alloc_consistent aligns on page boundarys already.
+ * Just need to check if divisible by 32
+ */
+ if ((sizeof(CommandList_struct) % 32) != 0) {
+ printk(KERN_WARNING "%s %d %s\n",
+ "cciss info: command size[",
+ (int)sizeof(CommandList_struct),
+ "] not divisible by 32, no performant mode..\n");
+ return;
+ }
+
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool = (__u64 *)pci_alloc_consistent(
+ h->pdev, h->max_commands * sizeof(__u64),
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
+ sizeof(__u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+ /* Controller spec: zero out this buffer. */
+ memset(h->reply_pool, 0, h->max_commands * sizeof(__u64));
+ h->reply_pool_head = h->reply_pool;
+
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries,
+ h->blockFetchTable);
+ writel(bft[0], &h->transtable->BlockFetch0);
+ writel(bft[1], &h->transtable->BlockFetch1);
+ writel(bft[2], &h->transtable->BlockFetch2);
+ writel(bft[3], &h->transtable->BlockFetch3);
+ writel(bft[4], &h->transtable->BlockFetch4);
+ writel(bft[5], &h->transtable->BlockFetch5);
+ writel(bft[6], &h->transtable->BlockFetch6);
+ writel(bft[7], &h->transtable->BlockFetch7);
+
+ /* size of controller ring buffer */
+ writel(h->max_commands, &h->transtable->RepQSize);
+ writel(1, &h->transtable->RepQCount);
+ writel(0, &h->transtable->RepQCtrAddrLow32);
+ writel(0, &h->transtable->RepQCtrAddrHigh32);
+ writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+ writel(0, &h->transtable->RepQAddr0High32);
+ writel(CFGTBL_Trans_Performant,
+ &(h->cfgtable->HostWrite.TransportRequest));
+
+ h->transMethod = CFGTBL_Trans_Performant;
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (l = 0; l < MAX_CONFIG_WAIT; l++) {
+ register_value = readl(h->vaddr + SA5_DOORBELL);
+ if (!(register_value & CFGTBL_ChangeReq))
+ break;
+ /* delay and try again */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ }
+ register_value = readl(&(h->cfgtable->TransportActive));
+ if (!(register_value & CFGTBL_Trans_Performant)) {
+ printk(KERN_WARNING "cciss: unable to get board into"
+ " performant mode\n");
+ return;
+ }
+
+ /* Change the access methods to the performant access methods */
+ h->access = SA5_performant_access;
+
+ return;
+clean_up:
+ kfree(h->blockFetchTable);
+ if (h->reply_pool)
+ pci_free_consistent(h->pdev,
+ h->max_commands * sizeof(__u64),
+ h->reply_pool,
+ h->reply_pool_dhandle);
+ return;
+
+} /* cciss_put_controller_into_performant_mode */
+
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use IO-APIC mode.
*/
@@ -3749,7 +3939,7 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ c->intr[PERF_MODE_INT] = pdev->irq;
return;
}
@@ -3761,6 +3951,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
int i, prod_index, err;
+ __u32 trans_offset;
subsystem_vendor_id = pdev->subsystem_vendor;
subsystem_device_id = pdev->subsystem_device;
@@ -3874,11 +4065,16 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
cfg_offset, sizeof(CfgTable_struct));
+ /* Find performant mode table. */
+ trans_offset = readl(&(c->cfgtable->TransMethodOffset));
+ c->transtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset+trans_offset,
+ sizeof(*c->transtable));
c->board_id = board_id;
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
+ #ifdef CCISS_DEBUG
+ print_cfg_table(c->cfgtable);
+ #endif /* CCISS_DEBUG */
/* Some controllers support Zero Memory Raid (ZMR).
* When configured in ZMR mode the number of supported
@@ -3888,7 +4084,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* are supported on the controller then subtract 4 to
* leave a little room for ioctl calls.
*/
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
+ c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands));
c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
/*
@@ -3933,7 +4129,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* kernels revealed a bug in the refetch if dom0 resides on a P600.
*/
if(board_id == 0x3225103C) {
- __u32 dma_prefetch;
+ __u32 dma_prefetch;
__u32 dma_refetch;
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
@@ -3944,38 +4140,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
}
#ifdef CCISS_DEBUG
- printk("Trying to put board into Simple mode\n");
+ printk(KERN_WARNING "Trying to put board into Performant mode\n");
#endif /* CCISS_DEBUG */
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- /* Update the field, and then ring the doorbell */
- writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
- writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
-
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
- if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- /* delay and try again */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(1));
- }
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "I counter got to %d %x\n", i,
- readl(c->vaddr + SA5_DOORBELL));
-#endif /* CCISS_DEBUG */
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
-
- if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
- printk(KERN_WARNING "cciss: unable to get board into"
- " simple mode\n");
- err = -ENODEV;
- goto err_out_free_res;
- }
return 0;
err_out_free_res:
@@ -3984,6 +4150,7 @@ err_out_free_res:
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
+ cciss_put_controller_into_performant_mode(c);
return err;
}
@@ -4260,7 +4427,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
i = alloc_cciss_hba();
if (i < 0)
return -1;
-
hba[i]->busy_initializing = 1;
INIT_HLIST_HEAD(&hba[i]->cmpQ);
INIT_HLIST_HEAD(&hba[i]->reqQ);
@@ -4327,7 +4493,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
hba[i]->devname, pdev->device, pci_name(pdev),
- hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+ hba[i]->intr[PERF_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
@@ -4433,7 +4599,7 @@ clean4:
hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
+ free_irq(hba[i]->intr[PERF_MODE_INT], hba[i]);
clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
@@ -4475,7 +4641,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
printk(KERN_WARNING "cciss%d: Error flushing cache\n",
h->ctlr);
h->access.set_intr_mask(h, CCISS_INTR_OFF);
- free_irq(h->intr[2], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
}
static void __devexit cciss_remove_one(struct pci_dev *pdev)
@@ -4575,7 +4741,6 @@ static int __init cciss_init(void)
* array of them, the size must be a multiple of 8 bytes.
*/
BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
-
printk(KERN_INFO DRIVER_NAME "\n");
err = bus_register(&cciss_bus_type);
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c527932d223a..8a9f5b58daa8 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -85,8 +85,8 @@ struct ctlr_info
int max_cmd_sgentries;
SGDescriptor_struct **cmd_sg_list;
-# define DOORBELL_INT 0
-# define PERF_MODE_INT 1
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
@@ -137,10 +137,27 @@ struct ctlr_info
struct list_head scan_list;
struct completion scan_wait;
struct device dev;
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
};
-/* Defining the diffent access_menthods */
-/*
+/* Defining the diffent access_methods
+ *
* Memory mapped FIFO interface (SMART 53xx cards)
*/
#define SA5_DOORBELL 0x20
@@ -159,6 +176,15 @@ struct ctlr_info
#define SA5B_INTR_PENDING 0x04
#define FIFO_EMPTY 0xffffffff
#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+/* Perf. mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
#define CISS_ERROR_BIT 0x02
@@ -170,8 +196,9 @@ struct ctlr_info
static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
{
#ifdef CCISS_DEBUG
- printk("Sending %x - down to controller\n", c->busaddr );
-#endif /* CCISS_DEBUG */
+ printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
+ h->ctlr, c->busaddr);
+#endif /* CCISS_DEBUG */
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if ( h->commands_outstanding > h->max_outstanding)
@@ -214,6 +241,20 @@ static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
+
+/* Performant mode intr_mask */
+static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
/*
* Returns true if fifo is full.
*
@@ -250,6 +291,40 @@ static unsigned long SA5_completed(ctlr_info_t *h)
return ( register_value);
}
+
+/* Performant mode command completed */
+static unsigned long SA5_performant_completed(ctlr_info_t *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
/*
* Returns true if an interrupt is pending..
*/
@@ -280,6 +355,20 @@ static bool SA5B_intr_pending(ctlr_info_t *h)
return 0 ;
}
+static bool SA5_performant_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
static struct access_method SA5_access = {
SA5_submit_command,
@@ -297,6 +386,14 @@ static struct access_method SA5B_access = {
SA5_completed,
};
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
struct board_type {
__u32 board_id;
char *product_name;
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index e624ff959cb6..eda6a8e6b600 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -54,6 +54,7 @@
#define CFGTBL_AccCmds 0x00000001l
#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
#define CFGTBL_BusType_Ultra2 0x00000001l
#define CFGTBL_BusType_Ultra3 0x00000002l
@@ -173,12 +174,15 @@ typedef struct _SGDescriptor_struct {
* PAD_64 can be adjusted independently as needed for 32-bit
* and 64-bits systems.
*/
-#define COMMANDLIST_ALIGNMENT (8)
+#define COMMANDLIST_ALIGNMENT (32)
#define IS_64_BIT ((sizeof(long) - 4)/4)
#define IS_32_BIT (!IS_64_BIT)
-#define PAD_32 (0)
+#define PAD_32 (32)
#define PAD_64 (4)
#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
+#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 5
+
typedef struct _CommandList_struct {
CommandListHeader_struct Header;
RequestBlock_struct Request;
@@ -195,7 +199,7 @@ typedef struct _CommandList_struct {
struct completion *waiting;
int retry_count;
void * scsi_cmd;
- char pad[PADSIZE];
+ char pad[PADSIZE];
} CommandList_struct;
/* Configuration Table Structure */
@@ -209,12 +213,15 @@ typedef struct _HostWrite_struct {
typedef struct _CfgTable_struct {
BYTE Signature[4];
DWORD SpecValence;
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
DWORD TransportSupport;
DWORD TransportActive;
HostWrite_struct HostWrite;
DWORD CmdsOutMax;
DWORD BusTypes;
- DWORD Reserved;
+ DWORD TransMethodOffset;
BYTE ServerName[16];
DWORD HeartBeat;
DWORD SCSI_Prefetch;
@@ -222,6 +229,25 @@ typedef struct _CfgTable_struct {
DWORD MaxLogicalUnits;
DWORD MaxPhysicalDrives;
DWORD MaxPhysicalDrivesPerLogicalUnit;
+ DWORD MaxPerformantModeCommands;
} CfgTable_struct;
+
+struct TransTable_struct {
+ u32 BlockFetch0;
+ u32 BlockFetch1;
+ u32 BlockFetch2;
+ u32 BlockFetch3;
+ u32 BlockFetch4;
+ u32 BlockFetch5;
+ u32 BlockFetch6;
+ u32 BlockFetch7;
+ u32 RepQSize;
+ u32 RepQCount;
+ u32 RepQCtrAddrLow32;
+ u32 RepQCtrAddrHigh32;
+ u32 RepQAddr0Low32;
+ u32 RepQAddr0High32;
+};
+
#pragma pack()
#endif /* CCISS_CMD_H */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 72dae92f3cab..48be47853737 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -93,8 +93,8 @@ static struct scsi_host_template cciss_driver_template = {
#pragma pack(1)
-#define SCSI_PAD_32 0
-#define SCSI_PAD_64 0
+#define SCSI_PAD_32 8
+#define SCSI_PAD_64 8
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
@@ -213,6 +213,8 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
/* Check alignment, see cciss_cmd.h near CommandList_struct def. */
BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
+ /* printk(KERN_WARNING "cciss_scsi.c: 0x%08x 0x%08x 0x%08x\n",
+ 0xdeadbeef, sizeof(*stk->pool), 0xbeefdead); */
/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);