summaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-ixp4xx/platform.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-ixp4xx/platform.h')
-rw-r--r--include/asm-arm/arch-ixp4xx/platform.h173
1 files changed, 0 insertions, 173 deletions
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
deleted file mode 100644
index a1f2b5404db1..000000000000
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef __ARMEB__
-#define REG_OFFSET 0
-#else
-#define REG_OFFSET 3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define IXP4XX_EXP_BUS_BASE(region)\
- (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
- (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
-
-#define IXP4XX_FLASH_WRITABLE (0x2)
-#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
-#define IXP4XX_FLASH_WRITE (0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-#define IXP4XX_UART_XTAL 14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
- volatile u32 *cs0_cfg;
- volatile u32 *cs1_cfg;
- unsigned long cs0_bits;
- unsigned long cs1_bits;
- void __iomem *cs0;
- void __iomem *cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 0x1
-#define IXP4XX_GPIO_IN 0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW 0
-#define IXP4XX_GPIO_HIGH 1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0 14
-#define IXP4XX_GPIO_CLK_1 15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
- if (direction == IXP4XX_GPIO_IN)
- *IXP4XX_GPIO_GPOER |= (1 << line);
- else
- *IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
- *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
- if (value == IXP4XX_GPIO_HIGH)
- *IXP4XX_GPIO_GPOUTR |= (1 << line);
- else if (value == IXP4XX_GPIO_LOW)
- *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-