summaryrefslogtreecommitdiff
path: root/include/linux/amba/pl08x.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/amba/pl08x.h')
-rw-r--r--include/linux/amba/pl08x.h156
1 files changed, 8 insertions, 148 deletions
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index 02549017212a..2a5f64a11b77 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -21,8 +21,9 @@
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
-struct pl08x_lli;
struct pl08x_driver_data;
+struct pl08x_phy_chan;
+struct pl08x_txd;
/* Bitmasks for selecting AHB ports for DMA transfers */
enum {
@@ -46,170 +47,29 @@ enum {
* devices with static assignments
* @muxval: a number usually used to poke into some mux regiser to
* mux in the signal to this channel
- * @cctl_opt: default options for the channel control register
+ * @cctl_memcpy: options for the channel control register for memcpy
+ * *** not used for slave channels ***
* @addr: source/target address in physical memory for this DMA channel,
* can be the address of a FIFO register for burst requests for example.
* This can be left undefined if the PrimeCell API is used for configuring
* this.
- * @circular_buffer: whether the buffer passed in is circular and
- * shall simply be looped round round (like a record baby round
- * round round round)
* @single: the device connected to this channel will request single DMA
* transfers, not bursts. (Bursts are default.)
* @periph_buses: the device connected to this channel is accessible via
* these buses (use PL08X_AHB1 | PL08X_AHB2).
*/
struct pl08x_channel_data {
- char *bus_id;
+ const char *bus_id;
int min_signal;
int max_signal;
u32 muxval;
- u32 cctl;
+ u32 cctl_memcpy;
dma_addr_t addr;
- bool circular_buffer;
bool single;
u8 periph_buses;
};
/**
- * Struct pl08x_bus_data - information of source or destination
- * busses for a transfer
- * @addr: current address
- * @maxwidth: the maximum width of a transfer on this bus
- * @buswidth: the width of this bus in bytes: 1, 2 or 4
- */
-struct pl08x_bus_data {
- dma_addr_t addr;
- u8 maxwidth;
- u8 buswidth;
-};
-
-/**
- * struct pl08x_phy_chan - holder for the physical channels
- * @id: physical index to this channel
- * @lock: a lock to use when altering an instance of this struct
- * @signal: the physical signal (aka channel) serving this physical channel
- * right now
- * @serving: the virtual channel currently being served by this physical
- * channel
- * @locked: channel unavailable for the system, e.g. dedicated to secure
- * world
- */
-struct pl08x_phy_chan {
- unsigned int id;
- void __iomem *base;
- spinlock_t lock;
- int signal;
- struct pl08x_dma_chan *serving;
- bool locked;
-};
-
-/**
- * struct pl08x_sg - structure containing data per sg
- * @src_addr: src address of sg
- * @dst_addr: dst address of sg
- * @len: transfer len in bytes
- * @node: node for txd's dsg_list
- */
-struct pl08x_sg {
- dma_addr_t src_addr;
- dma_addr_t dst_addr;
- size_t len;
- struct list_head node;
-};
-
-/**
- * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
- * @tx: async tx descriptor
- * @node: node for txd list for channels
- * @dsg_list: list of children sg's
- * @direction: direction of transfer
- * @llis_bus: DMA memory address (physical) start for the LLIs
- * @llis_va: virtual memory address start for the LLIs
- * @cctl: control reg values for current txd
- * @ccfg: config reg values for current txd
- */
-struct pl08x_txd {
- struct dma_async_tx_descriptor tx;
- struct list_head node;
- struct list_head dsg_list;
- enum dma_transfer_direction direction;
- dma_addr_t llis_bus;
- struct pl08x_lli *llis_va;
- /* Default cctl value for LLIs */
- u32 cctl;
- /*
- * Settings to be put into the physical channel when we
- * trigger this txd. Other registers are in llis_va[0].
- */
- u32 ccfg;
-};
-
-/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
- * states
- * @PL08X_CHAN_IDLE: the channel is idle
- * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
- * channel and is running a transfer on it
- * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
- * channel, but the transfer is currently paused
- * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
- * channel to become available (only pertains to memcpy channels)
- */
-enum pl08x_dma_chan_state {
- PL08X_CHAN_IDLE,
- PL08X_CHAN_RUNNING,
- PL08X_CHAN_PAUSED,
- PL08X_CHAN_WAITING,
-};
-
-/**
- * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
- * @chan: wrappped abstract channel
- * @phychan: the physical channel utilized by this channel, if there is one
- * @phychan_hold: if non-zero, hold on to the physical channel even if we
- * have no pending entries
- * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
- * @name: name of channel
- * @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
- * @runtime_direction: current direction of this channel according to
- * runtime config
- * @pend_list: queued transactions pending on this channel
- * @at: active transaction on this channel
- * @lock: a lock for this channel data
- * @host: a pointer to the host (internal use)
- * @state: whether the channel is idle, paused, running etc
- * @slave: whether this channel is a device (slave) or for memcpy
- * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
- * channels. Fill with 'true' if peripheral should be flow controller. Direction
- * will be selected at Runtime.
- * @waiting: a TX descriptor on this channel which is waiting for a physical
- * channel to become available
- */
-struct pl08x_dma_chan {
- struct dma_chan chan;
- struct pl08x_phy_chan *phychan;
- int phychan_hold;
- struct tasklet_struct tasklet;
- char *name;
- const struct pl08x_channel_data *cd;
- dma_addr_t src_addr;
- dma_addr_t dst_addr;
- u32 src_cctl;
- u32 dst_cctl;
- enum dma_transfer_direction runtime_direction;
- struct list_head pend_list;
- struct pl08x_txd *at;
- spinlock_t lock;
- struct pl08x_driver_data *host;
- enum pl08x_dma_chan_state state;
- bool slave;
- bool device_fc;
- struct pl08x_txd *waiting;
-};
-
-/**
* struct pl08x_platform_data - the platform configuration for the PL08x
* PrimeCells.
* @slave_channels: the channels defined for the different devices on the
@@ -229,8 +89,8 @@ struct pl08x_platform_data {
const struct pl08x_channel_data *slave_channels;
unsigned int num_slave_channels;
struct pl08x_channel_data memcpy_channel;
- int (*get_signal)(struct pl08x_dma_chan *);
- void (*put_signal)(struct pl08x_dma_chan *);
+ int (*get_signal)(const struct pl08x_channel_data *);
+ void (*put_signal)(const struct pl08x_channel_data *, int);
u8 lli_buses;
u8 mem_buses;
};