summaryrefslogtreecommitdiff
path: root/include/linux/sm501.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/sm501.h')
-rw-r--r--include/linux/sm501.h170
1 files changed, 170 insertions, 0 deletions
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
new file mode 100644
index 000000000000..9e3aaad6fe4d
--- /dev/null
+++ b/include/linux/sm501.h
@@ -0,0 +1,170 @@
+/* include/linux/sm501.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+extern int sm501_unit_power(struct device *dev,
+ unsigned int unit, unsigned int to);
+
+extern unsigned long sm501_set_clock(struct device *dev,
+ int clksrc, unsigned long freq);
+
+extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq);
+
+/* sm501_misc_control
+ *
+ * Modify the SM501's MISC_CONTROL register
+*/
+
+extern int sm501_misc_control(struct device *dev,
+ unsigned long set, unsigned long clear);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+extern unsigned long sm501_modify_reg(struct device *dev,
+ unsigned long reg,
+ unsigned long set,
+ unsigned long clear);
+
+/* sm501_gpio_set
+ *
+ * set the state of the given GPIO line
+*/
+
+extern void sm501_gpio_set(struct device *dev,
+ unsigned long gpio,
+ unsigned int to,
+ unsigned int dir);
+
+/* sm501_gpio_get
+ *
+ * get the state of the given GPIO line
+*/
+
+extern unsigned long sm501_gpio_get(struct device *dev,
+ unsigned long gpio);
+
+
+/* Platform data definitions */
+
+#define SM501FB_FLAG_USE_INIT_MODE (1<<0)
+#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1)
+#define SM501FB_FLAG_USE_HWCURSOR (1<<2)
+#define SM501FB_FLAG_USE_HWACCEL (1<<3)
+
+struct sm501_platdata_fbsub {
+ struct fb_videomode *def_mode;
+ unsigned int def_bpp;
+ unsigned long max_mem;
+ unsigned int flags;
+};
+
+enum sm501_fb_routing {
+ SM501_FB_OWN = 0, /* CRT=>CRT, Panel=>Panel */
+ SM501_FB_CRT_PANEL = 1, /* Panel=>CRT, Panel=>Panel */
+};
+
+/* sm501_platdata_fb flag field bit definitions */
+
+#define SM501_FBPD_SWAP_FB_ENDIAN (1<<0) /* need to endian swap */
+
+/* sm501_platdata_fb
+ *
+ * configuration data for the framebuffer driver
+*/
+
+struct sm501_platdata_fb {
+ enum sm501_fb_routing fb_route;
+ unsigned int flags;
+ struct sm501_platdata_fbsub *fb_crt;
+ struct sm501_platdata_fbsub *fb_pnl;
+};
+
+/* gpio i2c */
+
+struct sm501_platdata_gpio_i2c {
+ unsigned int pin_sda;
+ unsigned int pin_scl;
+};
+
+/* sm501_initdata
+ *
+ * use for initialising values that may not have been setup
+ * before the driver is loaded.
+*/
+
+struct sm501_reg_init {
+ unsigned long set;
+ unsigned long mask;
+};
+
+#define SM501_USE_USB_HOST (1<<0)
+#define SM501_USE_USB_SLAVE (1<<1)
+#define SM501_USE_SSP0 (1<<2)
+#define SM501_USE_SSP1 (1<<3)
+#define SM501_USE_UART0 (1<<4)
+#define SM501_USE_UART1 (1<<5)
+#define SM501_USE_FBACCEL (1<<6)
+#define SM501_USE_AC97 (1<<7)
+#define SM501_USE_I2S (1<<8)
+
+#define SM501_USE_ALL (0xffffffff)
+
+struct sm501_initdata {
+ struct sm501_reg_init gpio_low;
+ struct sm501_reg_init gpio_high;
+ struct sm501_reg_init misc_timing;
+ struct sm501_reg_init misc_control;
+
+ unsigned long devices;
+ unsigned long mclk; /* non-zero to modify */
+ unsigned long m1xclk; /* non-zero to modify */
+};
+
+/* sm501_init_gpio
+ *
+ * default gpio settings
+*/
+
+struct sm501_init_gpio {
+ struct sm501_reg_init gpio_data_low;
+ struct sm501_reg_init gpio_data_high;
+ struct sm501_reg_init gpio_ddr_low;
+ struct sm501_reg_init gpio_ddr_high;
+};
+
+/* sm501_platdata
+ *
+ * This is passed with the platform device to allow the board
+ * to control the behaviour of the SM501 driver(s) which attach
+ * to the device.
+ *
+*/
+
+struct sm501_platdata {
+ struct sm501_initdata *init;
+ struct sm501_init_gpio *init_gpiop;
+ struct sm501_platdata_fb *fb;
+
+ struct sm501_platdata_gpio_i2c *gpio_i2c;
+ unsigned int gpio_i2c_nr;
+};