summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h100
1 files changed, 100 insertions, 0 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 025d4cc7bbf8..e6d6a66a8f71 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -537,6 +537,21 @@ struct ieee80211_tx_info {
};
};
+/**
+ * struct ieee80211_sched_scan_ies - scheduled scan IEs
+ *
+ * This structure is used to pass the appropriate IEs to be used in scheduled
+ * scans for all bands. It contains both the IEs passed from the userspace
+ * and the ones generated by mac80211.
+ *
+ * @ie: array with the IEs for each supported band
+ * @len: array with the total length of the IEs for each band
+ */
+struct ieee80211_sched_scan_ies {
+ u8 *ie[IEEE80211_NUM_BANDS];
+ size_t len[IEEE80211_NUM_BANDS];
+};
+
static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
{
return (struct ieee80211_tx_info *)skb->cb;
@@ -1606,6 +1621,18 @@ enum ieee80211_ampdu_mlme_action {
* you should ensure to cancel it on this callback.
* Must be implemented and can sleep.
*
+ * @suspend: Suspend the device; mac80211 itself will quiesce before and
+ * stop transmitting and doing any other configuration, and then
+ * ask the device to suspend. This is only invoked when WoWLAN is
+ * configured, otherwise the device is deconfigured completely and
+ * reconfigured at resume time.
+ *
+ * @resume: If WoWLAN was configured, this indicates that mac80211 is
+ * now resuming its operation, after this the device must be fully
+ * functional again. If this returns an error, the only way out is
+ * to also unregister the device. If it returns 1, then mac80211
+ * will also go through the regular complete restart on resume.
+ *
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
@@ -1681,6 +1708,13 @@ enum ieee80211_ampdu_mlme_action {
* any error unless this callback returned a negative error code.
* The callback can sleep.
*
+ * @sched_scan_start: Ask the hardware to start scanning repeatedly at
+ * specific intervals. The driver must call the
+ * ieee80211_sched_scan_results() function whenever it finds results.
+ * This process will continue until sched_scan_stop is called.
+ *
+ * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
* The callback can sleep.
@@ -1819,11 +1853,22 @@ enum ieee80211_ampdu_mlme_action {
* @set_ringparam: Set tx and rx ring sizes.
*
* @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tx_frames_pending: Check if there is any pending frame in the hardware
+ * queues before entering power save.
+ *
+ * @set_bitrate_mask: Set a mask of rates to be used for rate control selection
+ * when transmitting a frame. Currently only legacy rates are handled.
+ * The callback can sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
+#ifdef CONFIG_PM
+ int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
+ int (*resume)(struct ieee80211_hw *hw);
+#endif
int (*add_interface)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
int (*change_interface)(struct ieee80211_hw *hw,
@@ -1854,6 +1899,12 @@ struct ieee80211_ops {
u32 iv32, u16 *phase1key);
int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
+ int (*sched_scan_start)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies);
+ void (*sched_scan_stop)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
void (*sw_scan_start)(struct ieee80211_hw *hw);
void (*sw_scan_complete)(struct ieee80211_hw *hw);
int (*get_stats)(struct ieee80211_hw *hw,
@@ -1906,6 +1957,9 @@ struct ieee80211_ops {
int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
void (*get_ringparam)(struct ieee80211_hw *hw,
u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+ bool (*tx_frames_pending)(struct ieee80211_hw *hw);
+ int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask);
};
/**
@@ -2223,6 +2277,19 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
#define IEEE80211_TX_STATUS_HEADROOM 13
/**
+ * ieee80211_sta_set_tim - set the TIM bit for a sleeping station
+ * @sta: &struct ieee80211_sta pointer for the sleeping station
+ *
+ * If a driver buffers frames for a powersave station instead of passing
+ * them back to mac80211 for retransmission, the station needs to be told
+ * to wake up using the TIM bitmap in the beacon.
+ *
+ * This function sets the station's TIM bit - it will be cleared when the
+ * station wakes up.
+ */
+void ieee80211_sta_set_tim(struct ieee80211_sta *sta);
+
+/**
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
@@ -2276,6 +2343,17 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb);
/**
+ * ieee80211_report_low_ack - report non-responding station
+ *
+ * When operating in AP-mode, call this function to report a non-responding
+ * connected STA.
+ *
+ * @sta: the non-responding connected sta
+ * @num_packets: number of packets sent to @sta without a response
+ */
+void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+
+/**
* ieee80211_beacon_get_tim - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -2545,6 +2623,28 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
/**
+ * ieee80211_sched_scan_results - got results from scheduled scan
+ *
+ * When a scheduled scan is running, this function needs to be called by the
+ * driver whenever there are new scan results available.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ *
+ * When a scheduled scan is running, this function can be called by
+ * the driver if it needs to stop the scan to perform another task.
+ * Usual scenarios are drivers that cannot continue the scheduled scan
+ * while associating, for instance.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+
+/**
* ieee80211_iterate_active_interfaces - iterate active interfaces
*
* This function iterates over the interfaces associated with a given