summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/arch-omap/common.h4
-rw-r--r--include/asm-arm/arch-omap/control.h2
-rw-r--r--include/asm-arm/arch-omap/mmc.h24
-rw-r--r--include/asm-arm/arch-sa1100/irqs.h2
-rw-r--r--include/asm-arm/hardware/locomo.h19
-rw-r--r--include/asm-m68k/bug.h4
-rw-r--r--include/asm-m68k/io.h44
-rw-r--r--include/asm-m68k/setup.h2
-rw-r--r--include/asm-m68k/uaccess.h6
-rw-r--r--include/linux/i2c.h7
-rw-r--r--include/linux/i2c/pcf857x.h3
11 files changed, 64 insertions, 53 deletions
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 224e009e5296..36a3b62d4d8d 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,4 +47,8 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 9944bb5d5330..59c0686f8be7 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -80,7 +80,7 @@
#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
index c9588f49eb52..7cfc5f258560 100644
--- a/include/asm-arm/arch-omap/mmc.h
+++ b/include/asm-arm/arch-omap/mmc.h
@@ -15,21 +15,16 @@
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <asm/arch/board.h>
+
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
struct omap_mmc_conf conf;
- unsigned enabled:1;
/* number of slots on board */
unsigned nr_slots:2;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO and
- * MMCv4 */
- unsigned wire4:1;
+
/* set if your board has components or wiring that limits the
* maximum frequency on the MMC bus */
unsigned int max_freq;
@@ -40,6 +35,11 @@ struct omap_mmc_platform_data {
* not supported */
int (* init)(struct device *dev);
void (* cleanup)(struct device *dev);
+ void (* shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
struct omap_mmc_slot_data {
int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
@@ -56,13 +56,19 @@ struct omap_mmc_platform_data {
const char *name;
u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (* card_detect)(int irq);
+
+ unsigned int ban_openended:1;
+
} slots[OMAP_MMC_MAX_SLOTS];
};
extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
index d7940683efb1..7bf80484bb77 100644
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -141,7 +141,7 @@
#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
/*
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
index adab77780ed3..fb0645de6f31 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/include/asm-arm/hardware/locomo.h
@@ -58,6 +58,11 @@
#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
#define LOCOMO_SPICT 0x04 /* SPI mode control */
#define LOCOMO_SPIST 0x08 /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
+#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
+#define LOCOMO_SPI_RFR (1) /* read buffer bit */
+
#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
@@ -66,16 +71,12 @@
#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
-#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
-#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */
-#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
-#define LOCOMO_SPI_RFR (1) /* read buffer bit */
/* GPIO */
#define LOCOMO_GPD 0x90 /* GPIO direction */
#define LOCOMO_GPE 0x94 /* GPIO input enable */
#define LOCOMO_GPL 0x98 /* GPIO level */
-#define LOCOMO_GPO 0x9c /* GPIO out data setteing */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
@@ -96,6 +97,9 @@
#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
/* Start the definitions of the devices. Each device has an initial
* base address and a series of offsets from that base address. */
@@ -122,7 +126,7 @@
/* Audio controller */
#define LOCOMO_AUDIO 0x54
#define LOCOMO_ACC 0x00 /* Audio clock */
-#define LOCOMO_PAIF 0x7C /* PCM audio interface */
+#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
/* Audio clock */
#define LOCOMO_ACC_XON 0x80
#define LOCOMO_ACC_XEN 0x40
@@ -162,7 +166,7 @@ extern struct bus_type locomo_bus_type;
#define LOCOMO_DEVID_AUDIO 3
#define LOCOMO_DEVID_LED 4
#define LOCOMO_DEVID_UART 5
-#define LOCOMO_DEVID_SPI 6
+#define LOCOMO_DEVID_SPI 6
struct locomo_dev {
struct device dev;
@@ -204,7 +208,6 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits);
int locomo_gpio_read_output(struct device *dev, unsigned int bits);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
/* M62332 control function */
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
diff --git a/include/asm-m68k/bug.h b/include/asm-m68k/bug.h
index 7b60776cc966..e5b528deb8a8 100644
--- a/include/asm-m68k/bug.h
+++ b/include/asm-m68k/bug.h
@@ -7,7 +7,7 @@
#ifndef CONFIG_SUN3
#define BUG() do { \
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#else
#define BUG() do { \
@@ -17,7 +17,7 @@
#endif
#else
#define BUG() do { \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index baf4f9b8acfc..657187f0c7c2 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -91,20 +91,20 @@ extern unsigned long gg2_isa_base;
#undef MULTI_ISA
#endif
-#define Q40_ISA (1)
-#define GG2_ISA (2)
-#define AG_ISA (3)
+#define ISA_TYPE_Q40 (1)
+#define ISA_TYPE_GG2 (2)
+#define ISA_TYPE_AG (3)
#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
-#define ISA_TYPE Q40_ISA
+#define ISA_TYPE ISA_TYPE_Q40
#define ISA_SEX 0
#endif
#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
-#define ISA_TYPE AG_ISA
+#define ISA_TYPE ISA_TYPE_AG
#define ISA_SEX 1
#endif
#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
-#define ISA_TYPE GG2_ISA
+#define ISA_TYPE ISA_TYPE_GG2
#define ISA_SEX 0
#endif
@@ -126,13 +126,13 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_IO_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_IO_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)AG_ISA_IO_B(addr);
+ case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -142,13 +142,13 @@ static inline u16 __iomem *isa_itw(unsigned long addr)
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_IO_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_IO_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -158,7 +158,7 @@ static inline u32 __iomem *isa_itl(unsigned long addr)
switch(ISA_TYPE)
{
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u32 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return 0; /* avoid warnings, just in case */
}
@@ -168,13 +168,13 @@ static inline u8 __iomem *isa_mtb(unsigned long addr)
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)addr;
+ case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -184,13 +184,13 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)addr;
+ case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -218,13 +218,13 @@ static inline void isa_delay(void)
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: isa_outb(0,0x80); break;
+ case ISA_TYPE_Q40: isa_outb(0,0x80); break;
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: break;
+ case ISA_TYPE_GG2: break;
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: break;
+ case ISA_TYPE_AG: break;
#endif
default: break; /* avoid warnings */
}
diff --git a/include/asm-m68k/setup.h b/include/asm-m68k/setup.h
index 2a8853cd6554..4dfb3952b375 100644
--- a/include/asm-m68k/setup.h
+++ b/include/asm-m68k/setup.h
@@ -248,7 +248,7 @@ extern unsigned long m68k_machtype;
#ifndef __ASSEMBLY__
extern unsigned long m68k_cputype;
extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype; /* Not really used yet */
+extern unsigned long m68k_mmutype;
#ifdef CONFIG_VME
extern unsigned long vme_brdtype;
#endif
diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h
index 5c1264cf0c65..7107f3fbdbb6 100644
--- a/include/asm-m68k/uaccess.h
+++ b/include/asm-m68k/uaccess.h
@@ -14,7 +14,11 @@
#define VERIFY_WRITE 1
/* We let the MMU do all checking */
-#define access_ok(type,addr,size) 1
+static inline int access_ok(int type, const void __user *addr,
+ unsigned long size)
+{
+ return 1;
+}
/*
* The exception table consists of pairs of addresses: the first is the
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 6716ec808c5e..fb9af6a0fe9c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -155,8 +155,6 @@ struct i2c_driver {
* @driver: device's driver, hence pointer to access routines
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
- * @driver_name: Identifies new-style driver used with this device; also
- * used as the module name for hotplug/coldplug modprobe support.
* @list: list of active/busy clients (DEPRECATED)
* @released: used to synchronize client releases & detaches and references
*
@@ -174,7 +172,6 @@ struct i2c_client {
struct i2c_driver *driver; /* and our access routines */
struct device dev; /* the device structure */
int irq; /* irq issued by device (or -1) */
- char driver_name[KOBJ_NAME_LEN];
struct list_head list; /* DEPRECATED */
struct completion released;
};
@@ -200,8 +197,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
/**
* struct i2c_board_info - template for device creation
- * @driver_name: identifies the driver to be bound to the device
- * @type: optional chip type information, to initialize i2c_client.name
+ * @type: chip type, to initialize i2c_client.name
* @flags: to initialize i2c_client.flags
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
@@ -220,7 +216,6 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
* with the adapter already known.
*/
struct i2c_board_info {
- char driver_name[KOBJ_NAME_LEN];
char type[I2C_NAME_SIZE];
unsigned short flags;
unsigned short addr;
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index ba8ea6e16476..0767a2a6b2f1 100644
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -12,8 +12,7 @@
* @context: optional parameter passed to setup() and teardown()
*
* In addition to the I2C_BOARD_INFO() state appropriate to each chip,
- * the i2c_board_info used with the pcf875x driver must provide the
- * chip "type" ("pcf8574", "pcf8574a", "pcf8575", "pcf8575c") and its
+ * the i2c_board_info used with the pcf875x driver must provide its
* platform_data (pointer to one of these structures) with at least
* the gpio_base value initialized.
*
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 15:05:00 +0000