diff options
Diffstat (limited to 'sound/oss/ad1848.c')
| -rw-r--r-- | sound/oss/ad1848.c | 3159 |
1 files changed, 3159 insertions, 0 deletions
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c new file mode 100644 index 000000000000..4384dac3f794 --- /dev/null +++ b/sound/oss/ad1848.c @@ -0,0 +1,3159 @@ +/* + * sound/ad1848.c + * + * The low level driver for the AD1848/CS4248 codec chip which + * is used for example in the MS Sound System. + * + * The CS4231 which is used in the GUS MAX and some other cards is + * upwards compatible with AD1848 and this driver is able to drive it. + * + * CS4231A and AD1845 are upward compatible with CS4231. However + * the new features of these chips are different. + * + * CS4232 is a PnP audio chip which contains a CS4231A (and SB, MPU). + * CS4232A is an improved version of CS4232. + * + * + * + * Copyright (C) by Hannu Savolainen 1993-1997 + * + * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) + * Version 2 (June 1991). See the "COPYING" file distributed with this software + * for more info. + * + * + * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) + * general sleep/wakeup clean up. + * Alan Cox : reformatted. Fixed SMP bugs. Moved to kernel alloc/free + * of irqs. Use dev_id. + * Christoph Hellwig : adapted to module_init/module_exit + * Aki Laukkanen : added power management support + * Arnaldo C. de Melo : added missing restore_flags in ad1848_resume + * Miguel Freitas : added ISA PnP support + * Alan Cox : Added CS4236->4239 identification + * Daniel T. Cobra : Alernate config/mixer for later chips + * Alan Cox : Merged chip idents and config code + * + * TODO + * APM save restore assist code on IBM thinkpad + * + * Status: + * Tested. Believed fully functional. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/pm.h> +#include <linux/isapnp.h> +#include <linux/pnp.h> +#include <linux/spinlock.h> + +#define DEB(x) +#define DEB1(x) +#include "sound_config.h" + +#include "ad1848.h" +#include "ad1848_mixer.h" + +typedef struct +{ + spinlock_t lock; + int base; + int irq; + int dma1, dma2; + int dual_dma; /* 1, when two DMA channels allocated */ + int subtype; + unsigned char MCE_bit; + unsigned char saved_regs[64]; /* Includes extended register space */ + int debug_flag; + + int audio_flags; + int record_dev, playback_dev; + + int xfer_count; + int audio_mode; + int open_mode; + int intr_active; + char *chip_name, *name; + int model; +#define MD_1848 1 +#define MD_4231 2 +#define MD_4231A 3 +#define MD_1845 4 +#define MD_4232 5 +#define MD_C930 6 +#define MD_IWAVE 7 +#define MD_4235 8 /* Crystal Audio CS4235 */ +#define MD_1845_SSCAPE 9 /* Ensoniq Soundscape PNP*/ +#define MD_4236 10 /* 4236 and higher */ +#define MD_42xB 11 /* CS 42xB */ +#define MD_4239 12 /* CS4239 */ + + /* Mixer parameters */ + int recmask; + int supported_devices, orig_devices; + int supported_rec_devices, orig_rec_devices; + int *levels; + short mixer_reroute[32]; + int dev_no; + volatile unsigned long timer_ticks; + int timer_running; + int irq_ok; + mixer_ents *mix_devices; + int mixer_output_port; + + /* Power management */ + struct pm_dev *pmdev; +} ad1848_info; + +typedef struct ad1848_port_info +{ + int open_mode; + int speed; + unsigned char speed_bits; + int channels; + int audio_format; + unsigned char format_bits; +} +ad1848_port_info; + +static struct address_info cfg; +static int nr_ad1848_devs; + +static int deskpro_xl; +static int deskpro_m; +static int soundpro; + +static volatile signed char irq2dev[17] = { + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +#ifndef EXCLUDE_TIMERS +static int timer_installed = -1; +#endif + +static int loaded; + +static int ad_format_mask[13 /*devc->model */ ] = +{ + 0, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, /* AD1845 */ + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE /* CS4235 */, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW /* Ensoniq Soundscape*/, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, + AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM +}; + +static ad1848_info adev_info[MAX_AUDIO_DEV]; + +#define io_Index_Addr(d) ((d)->base) +#define io_Indexed_Data(d) ((d)->base+1) +#define io_Status(d) ((d)->base+2) +#define io_Polled_IO(d) ((d)->base+3) + +static struct { + unsigned char flags; +#define CAP_F_TIMER 0x01 +} capabilities [10 /*devc->model */ ] = { + {0} + ,{0} /* MD_1848 */ + ,{CAP_F_TIMER} /* MD_4231 */ + ,{CAP_F_TIMER} /* MD_4231A */ + ,{CAP_F_TIMER} /* MD_1845 */ + ,{CAP_F_TIMER} /* MD_4232 */ + ,{0} /* MD_C930 */ + ,{CAP_F_TIMER} /* MD_IWAVE */ + ,{0} /* MD_4235 */ + ,{CAP_F_TIMER} /* MD_1845_SSCAPE */ +}; + +#ifdef CONFIG_PNP +static int isapnp = 1; +static int isapnpjump; +static int reverse; + +static int audio_activated; +#else +static int isapnp; +#endif + + + +static int ad1848_open(int dev, int mode); +static void ad1848_close(int dev); +static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag); +static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag); +static int ad1848_prepare_for_output(int dev, int bsize, int bcount); +static int ad1848_prepare_for_input(int dev, int bsize, int bcount); +static void ad1848_halt(int dev); +static void ad1848_halt_input(int dev); +static void ad1848_halt_output(int dev); +static void ad1848_trigger(int dev, int bits); +static int ad1848_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *data); + +#ifndef EXCLUDE_TIMERS +static int ad1848_tmr_install(int dev); +static void ad1848_tmr_reprogram(int dev); +#endif + +static int ad_read(ad1848_info * devc, int reg) +{ + int x; + int timeout = 900000; + + while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ + timeout--; + + if(reg < 32) + { + outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); + x = inb(io_Indexed_Data(devc)); + } + else + { + int xreg, xra; + + xreg = (reg & 0xff) - 32; + xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2); + outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); + outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc)); + x = inb(io_Indexed_Data(devc)); + } + + return x; +} + +static void ad_write(ad1848_info * devc, int reg, int data) +{ + int timeout = 900000; + + while (timeout > 0 && inb(devc->base) == 0x80) /* Are we initializing */ + timeout--; + + if(reg < 32) + { + outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); + outb(((unsigned char) (data & 0xff)), io_Indexed_Data(devc)); + } + else + { + int xreg, xra; + + xreg = (reg & 0xff) - 32; + xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2); + outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); + outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc)); + outb((unsigned char) (data & 0xff), io_Indexed_Data(devc)); + } +} + +static void wait_for_calibration(ad1848_info * devc) +{ + int timeout = 0; + + /* + * Wait until the auto calibration process has finished. + * + * 1) Wait until the chip becomes ready (reads don't return 0x80). + * 2) Wait until the ACI bit of I11 gets on and then off. + */ + + timeout = 100000; + while (timeout > 0 && inb(devc->base) == 0x80) + timeout--; + if (inb(devc->base) & 0x80) + printk(KERN_WARNING "ad1848: Auto calibration timed out(1).\n"); + + timeout = 100; + while (timeout > 0 && !(ad_read(devc, 11) & 0x20)) + timeout--; + if (!(ad_read(devc, 11) & 0x20)) + return; + + timeout = 80000; + while (timeout > 0 && (ad_read(devc, 11) & 0x20)) + timeout--; + if (ad_read(devc, 11) & 0x20) + if ( (devc->model != MD_1845) || (devc->model != MD_1845_SSCAPE)) + printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n"); +} + +static void ad_mute(ad1848_info * devc) +{ + int i; + unsigned char prev; + + /* + * Save old register settings and mute output channels + */ + + for (i = 6; i < 8; i++) + { + prev = devc->saved_regs[i] = ad_read(devc, i); + } + +} + +static void ad_unmute(ad1848_info * devc) +{ +} + +static void ad_enter_MCE(ad1848_info * devc) +{ + int timeout = 1000; + unsigned short prev; + + while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ + timeout--; + + devc->MCE_bit = 0x40; + prev = inb(io_Index_Addr(devc)); + if (prev & 0x40) + { + return; + } + outb((devc->MCE_bit), io_Index_Addr(devc)); +} + +static void ad_leave_MCE(ad1848_info * devc) +{ + unsigned char prev, acal; + int timeout = 1000; + + while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ + timeout--; + + acal = ad_read(devc, 9); + + devc->MCE_bit = 0x00; + prev = inb(io_Index_Addr(devc)); + outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */ + + if ((prev & 0x40) == 0) /* Not in MCE mode */ + { + return; + } + outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */ + if (acal & 0x08) /* Auto calibration is enabled */ + wait_for_calibration(devc); +} + +static int ad1848_set_recmask(ad1848_info * devc, int mask) +{ + unsigned char recdev; + int i, n; + unsigned long flags; + + mask &= devc->supported_rec_devices; + + /* Rename the mixer bits if necessary */ + for (i = 0; i < 32; i++) + { + if (devc->mixer_reroute[i] != i) + { + if (mask & (1 << i)) + { + mask &= ~(1 << i); + mask |= (1 << devc->mixer_reroute[i]); + } + } + } + + n = 0; + for (i = 0; i < 32; i++) /* Count selected device bits */ + if (mask & (1 << i)) + n++; + + spin_lock_irqsave(&devc->lock,flags); + if (!soundpro) { + if (n == 0) + mask = SOUND_MASK_MIC; + else if (n != 1) { /* Too many devices selected */ + mask &= ~devc->recmask; /* Filter out active settings */ + + n = 0; + for (i = 0; i < 32; i++) /* Count selected device bits */ + if (mask & (1 << i)) + n++; + + if (n != 1) + mask = SOUND_MASK_MIC; + } + switch (mask) { + case SOUND_MASK_MIC: + recdev = 2; + break; + + case SOUND_MASK_LINE: + case SOUND_MASK_LINE3: + recdev = 0; + break; + + case SOUND_MASK_CD: + case SOUND_MASK_LINE1: + recdev = 1; + break; + + case SOUND_MASK_IMIX: + recdev = 3; + break; + + default: + mask = SOUND_MASK_MIC; + recdev = 2; + } + + recdev <<= 6; + ad_write(devc, 0, (ad_read(devc, 0) & 0x3f) | recdev); + ad_write(devc, 1, (ad_read(devc, 1) & 0x3f) | recdev); + } else { /* soundpro */ + unsigned char val; + int set_rec_bit; + int j; + + for (i = 0; i < 32; i++) { /* For each bit */ + if ((devc->supported_rec_devices & (1 << i)) == 0) + continue; /* Device not supported */ + + for (j = LEFT_CHN; j <= RIGHT_CHN; j++) { + if (devc->mix_devices[i][j].nbits == 0) /* Inexistent channel */ + continue; + + /* + * This is tricky: + * set_rec_bit becomes 1 if the corresponding bit in mask is set + * then it gets flipped if the polarity is inverse + */ + set_rec_bit = ((mask & (1 << i)) != 0) ^ devc->mix_devices[i][j].recpol; + + val = ad_read(devc, devc->mix_devices[i][j].recreg); + val &= ~(1 << devc->mix_devices[i][j].recpos); + val |= (set_rec_bit << devc->mix_devices[i][j].recpos); + ad_write(devc, devc->mix_devices[i][j].recreg, val); + } + } + } + spin_unlock_irqrestore(&devc->lock,flags); + + /* Rename the mixer bits back if necessary */ + for (i = 0; i < 32; i++) + { + if (devc->mixer_reroute[i] != i) + { + if (mask & (1 << devc->mixer_reroute[i])) + { + mask &= ~(1 << devc->mixer_reroute[i]); + mask |= (1 << i); + } + } + } + devc->recmask = mask; + return mask; +} + +static void change_bits(ad1848_info * devc, unsigned char *regval, + unsigned char *muteval, int dev, int chn, int newval) +{ + unsigned char mask; + int shift; + int mute; + int mutemask; + int set_mute_bit; + + set_mute_bit = (newval == 0) ^ devc->mix_devices[dev][chn].mutepol; + + if (devc->mix_devices[dev][chn].polarity == 1) /* Reverse */ + newval = 100 - newval; + + mask = (1 << devc->mix_devices[dev][chn].nbits) - 1; + shift = devc->mix_devices[dev][chn].bitpos; + + if (devc->mix_devices[dev][chn].mutepos == 8) + { /* if there is no mute bit */ + mute = 0; /* No mute bit; do nothing special */ + mutemask = ~0; /* No mute bit; do nothing special */ + } + else + { + mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos); + mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos); + } + + newval = (int) ((newval * mask) + 50) / 100; /* Scale it */ + *regval &= ~(mask << shift); /* Clear bits */ + *regval |= (newval & mask) << shift; /* Set new value */ + + *muteval &= mutemask; + *muteval |= mute; +} + +static int ad1848_mixer_get(ad1848_info * devc, int dev) +{ + if (!((1 << dev) & devc->supported_devices)) + return -EINVAL; + + dev = devc->mixer_reroute[dev]; + + return devc->levels[dev]; +} + +static void ad1848_mixer_set_channel(ad1848_info *devc, int dev, int value, int channel) +{ + int regoffs, muteregoffs; + unsigned char val, muteval; + unsigned long flags; + + regoffs = devc->mix_devices[dev][channel].regno; + muteregoffs = devc->mix_devices[dev][channel].mutereg; + val = ad_read(devc, regoffs); + + if (muteregoffs != regoffs) { + muteval = ad_read(devc, muteregoffs); + change_bits(devc, &val, &muteval, dev, channel, value); + } + else + change_bits(devc, &val, &val, dev, channel, value); + + spin_lock_irqsave(&devc->lock,flags); + ad_write(devc, regoffs, val); + devc->saved_regs[regoffs] = val; + if (muteregoffs != regoffs) { + ad_write(devc, muteregoffs, muteval); + devc->saved_regs[muteregoffs] = muteval; + } + spin_unlock_irqrestore(&devc->lock,flags); +} + +static int ad1848_mixer_set(ad1848_info * devc, int dev, int value) +{ + int left = value & 0x000000ff; + int right = (value & 0x0000ff00) >> 8; + int retvol; + + if (dev > 31) + return -EINVAL; + + if (!(devc->supported_devices & (1 << dev))) + return -EINVAL; + + dev = devc->mixer_reroute[dev]; + + if (devc->mix_devices[dev][LEFT_CHN].nbits == 0) + return -EINVAL; + + if (left > 100) + left = 100; + if (right > 100) + right = 100; + + if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0) /* Mono control */ + right = left; + + retvol = left | (right << 8); + + /* Scale volumes */ + left = mix_cvt[left]; + right = mix_cvt[right]; + + devc->levels[dev] = retvol; + + /* + * Set the left channel + */ + ad1848_mixer_set_channel(devc, dev, left, LEFT_CHN); + + /* + * Set the right channel + */ + if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0) + goto out; + ad1848_mixer_set_channel(devc, dev, right, RIGHT_CHN); + + out: + return retvol; +} + +static void ad1848_mixer_reset(ad1848_info * devc) +{ + int i; + char name[32]; + unsigned long flags; + + devc->mix_devices = &(ad1848_mix_devices[0]); + + sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs); + + for (i = 0; i < 32; i++) + devc->mixer_reroute[i] = i; + + devc->supported_rec_devices = MODE1_REC_DEVICES; + + switch (devc->model) + { + case MD_4231: + case MD_4231A: + case MD_1845: + case MD_1845_SSCAPE: + devc->supported_devices = MODE2_MIXER_DEVICES; + break; + + case MD_C930: + devc->supported_devices = C930_MIXER_DEVICES; + devc->mix_devices = &(c930_mix_devices[0]); + break; + + case MD_IWAVE: + devc->supported_devices = MODE3_MIXER_DEVICES; + devc->mix_devices = &(iwave_mix_devices[0]); + break; + + case MD_42xB: + case MD_4239: + devc->mix_devices = &(cs42xb_mix_devices[0]); + devc->supported_devices = MODE3_MIXER_DEVICES; + break; + case MD_4232: + case MD_4235: + case MD_4236: + devc->supported_devices = MODE3_MIXER_DEVICES; + break; + + case MD_1848: + if (soundpro) { + devc->supported_devices = SPRO_MIXER_DEVICES; + devc->supported_rec_devices = SPRO_REC_DEVICES; + devc->mix_devices = &(spro_mix_devices[0]); + break; + } + + default: + devc->supported_devices = MODE1_MIXER_DEVICES; + } + + devc->orig_devices = devc->supported_devices; + devc->orig_rec_devices = devc->supported_rec_devices; + + devc->levels = load_mixer_volumes(name, default_mixer_levels, 1); + + for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) + { + if (devc->supported_devices & (1 << i)) + ad1848_mixer_set(devc, i, devc->levels[i]); + } + + ad1848_set_recmask(devc, SOUND_MASK_MIC); + + devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT; + + spin_lock_irqsave(&devc->lock,flags); + if (!soundpro) { + if (devc->mixer_output_port & AUDIO_SPEAKER) + ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */ + else + ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */ + } else { + /* + * From the "wouldn't it be nice if the mixer API had (better) + * support for custom stuff" category + */ + /* Enable surround mode and SB16 mixer */ + ad_write(devc, 16, 0x60); + } + spin_unlock_irqrestore(&devc->lock,flags); +} + +static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) +{ + ad1848_info *devc = mixer_devs[dev]->devc; + int val; + + if (cmd == SOUND_MIXER_PRIVATE1) + { + if (get_user(val, (int __user *)arg)) + return -EFAULT; + + if (val != 0xffff) + { + unsigned long flags; + val &= (AUDIO_SPEAKER | AUDIO_HEADPHONE | AUDIO_LINE_OUT); + devc->mixer_output_port = val; + val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT; /* Always on */ + devc->mixer_output_port = val; + spin_lock_irqsave(&devc->lock,flags); + if (val & AUDIO_SPEAKER) + ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */ + else + ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */ + spin_unlock_irqrestore(&devc->lock,flags); + } + val = devc->mixer_output_port; + return put_user(val, (int __user *)arg); + } + if (cmd == SOUND_MIXER_PRIVATE2) + { + if (get_user(val, (int __user *)arg)) + return -EFAULT; + return(ad1848_control(AD1848_MIXER_REROUTE, val)); + } + if (((cmd >> 8) & 0xff) == 'M') + { + if (_SIOC_DIR(cmd) & _SIOC_WRITE) + { + switch (cmd & 0xff) + { + case SOUND_MIXER_RECSRC: + if (get_user(val, (int __user *)arg)) + return -EFAULT; + val = ad1848_set_recmask(devc, val); + break; + + default: + if (get_user(val, (int __user *)arg)) + return -EFAULT; + val = ad1848_mixer_set(devc, cmd & 0xff, val); + break; + } + return put_user(val, (int __user *)arg); + } + else + { + switch (cmd & 0xff) + { + /* + * Return parameters + */ + + case SOUND_MIXER_RECSRC: + val = devc->recmask; + break; + + case SOUND_MIXER_DEVMASK: + val = devc->supported_devices; + break; + + case SOUND_MIXER_STEREODEVS: + val = devc->supported_devices; + if (devc->model != MD_C930) + val &= ~(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX); + break; + + case SOUND_MIXER_RECMASK: + val = devc->supported_rec_devices; + break; + + case SOUND_MIXER_CAPS: + val=SOUND_CAP_EXCL_INPUT; + break; + + default: + val = ad1848_mixer_get(devc, cmd & 0xff); + break; + } + return put_user(val, (int __user *)arg); + } + } + else + return -EINVAL; +} + +static int ad1848_set_speed(int dev, int arg) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + /* + * The sampling speed is encoded in the least significant nibble of I8. The + * LSB selects the clock source (0=24.576 MHz, 1=16.9344 MHz) and other + * three bits select the divisor (indirectly): + * + * The available speeds are in the following table. Keep the speeds in + * the increasing order. + */ + typedef struct + { + int speed; + unsigned char bits; + } + speed_struct; + + static speed_struct speed_table[] = + { + {5510, (0 << 1) | 1}, + {5510, (0 << 1) | 1}, + {6620, (7 << 1) | 1}, + {8000, (0 << 1) | 0}, + {9600, (7 << 1) | 0}, + {11025, (1 << 1) | 1}, + {16000, (1 << 1) | 0}, + {18900, (2 << 1) | 1}, + {22050, (3 << 1) | 1}, + {27420, (2 << 1) | 0}, + {32000, (3 << 1) | 0}, + {33075, (6 << 1) | 1}, + {37800, (4 << 1) | 1}, + {44100, (5 << 1) | 1}, + {48000, (6 << 1) | 0} + }; + + int i, n, selected = -1; + + n = sizeof(speed_table) / sizeof(speed_struct); + + if (arg <= 0) + return portc->speed; + + if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* AD1845 has different timer than others */ + { + if (arg < 4000) + arg = 4000; + if (arg > 50000) + arg = 50000; + + portc->speed = arg; + portc->speed_bits = speed_table[3].bits; + return portc->speed; + } + if (arg < speed_table[0].speed) + selected = 0; + if (arg > speed_table[n - 1].speed) + selected = n - 1; + + for (i = 1 /*really */ ; selected == -1 && i < n; i++) + { + if (speed_table[i].speed == arg) + selected = i; + else if (speed_table[i].speed > arg) + { + int diff1, diff2; + + diff1 = arg - speed_table[i - 1].speed; + diff2 = speed_table[i].speed - arg; + + if (diff1 < diff2) + selected = i - 1; + else + selected = i; + } + } + if (selected == -1) + { + printk(KERN_WARNING "ad1848: Can't find speed???\n"); + selected = 3; + } + portc->speed = speed_table[selected].speed; + portc->speed_bits = speed_table[selected].bits; + return portc->speed; +} + +static short ad1848_set_channels(int dev, short arg) +{ + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + if (arg != 1 && arg != 2) + return portc->channels; + + portc->channels = arg; + return arg; +} + +static unsigned int ad1848_set_bits(int dev, unsigned int arg) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + static struct format_tbl + { + int format; + unsigned char bits; + } + format2bits[] = + { + { + 0, 0 + } + , + { + AFMT_MU_LAW, 1 + } + , + { + AFMT_A_LAW, 3 + } + , + { + AFMT_IMA_ADPCM, 5 + } + , + { + AFMT_U8, 0 + } + , + { + AFMT_S16_LE, 2 + } + , + { + AFMT_S16_BE, 6 + } + , + { + AFMT_S8, 0 + } + , + { + AFMT_U16_LE, 0 + } + , + { + AFMT_U16_BE, 0 + } + }; + int i, n = sizeof(format2bits) / sizeof(struct format_tbl); + + if (arg == 0) + return portc->audio_format; + + if (!(arg & ad_format_mask[devc->model])) + arg = AFMT_U8; + + portc->audio_format = arg; + + for (i = 0; i < n; i++) + if (format2bits[i].format == arg) + { + if ((portc->format_bits = format2bits[i].bits) == 0) + return portc->audio_format = AFMT_U8; /* Was not supported */ + + return arg; + } + /* Still hanging here. Something must be terribly wrong */ + portc->format_bits = 0; + return portc->audio_format = AFMT_U8; +} + +static struct audio_driver ad1848_audio_driver = +{ + .owner = THIS_MODULE, + .open = ad1848_open, + .close = ad1848_close, + .output_block = ad1848_output_block, + .start_input = ad1848_start_input, + .prepare_for_input = ad1848_prepare_for_input, + .prepare_for_output = ad1848_prepare_for_output, + .halt_io = ad1848_halt, + .halt_input = ad1848_halt_input, + .halt_output = ad1848_halt_output, + .trigger = ad1848_trigger, + .set_speed = ad1848_set_speed, + .set_bits = ad1848_set_bits, + .set_channels = ad1848_set_channels +}; + +static struct mixer_operations ad1848_mixer_operations = +{ + .owner = THIS_MODULE, + .id = "SOUNDPORT", + .name = "AD1848/CS4248/CS4231", + .ioctl = ad1848_mixer_ioctl +}; + +static int ad1848_open(int dev, int mode) +{ + ad1848_info *devc; + ad1848_port_info *portc; + unsigned long flags; + + if (dev < 0 || dev >= num_audiodevs) + return -ENXIO; + + devc = (ad1848_info *) audio_devs[dev]->devc; + portc = (ad1848_port_info *) audio_devs[dev]->portc; + + /* here we don't have to protect against intr */ + spin_lock(&devc->lock); + if (portc->open_mode || (devc->open_mode & mode)) + { + spin_unlock(&devc->lock); + return -EBUSY; + } + devc->dual_dma = 0; + + if (audio_devs[dev]->flags & DMA_DUPLEX) + { + devc->dual_dma = 1; + } + devc->intr_active = 0; + devc->audio_mode = 0; + devc->open_mode |= mode; + portc->open_mode = mode; + spin_unlock(&devc->lock); + ad1848_trigger(dev, 0); + + if (mode & OPEN_READ) + devc->record_dev = dev; + if (mode & OPEN_WRITE) + devc->playback_dev = dev; +/* + * Mute output until the playback really starts. This decreases clicking (hope so). + */ + spin_lock_irqsave(&devc->lock,flags); + ad_mute(devc); + spin_unlock_irqrestore(&devc->lock,flags); + + return 0; +} + +static void ad1848_close(int dev) +{ + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + DEB(printk("ad1848_close(void)\n")); + + devc->intr_active = 0; + ad1848_halt(dev); + + spin_lock_irqsave(&devc->lock,flags); + + devc->audio_mode = 0; + devc->open_mode &= ~portc->open_mode; + portc->open_mode = 0; + + ad_unmute(devc); + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag) +{ + unsigned long flags, cnt; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + cnt = count; + + if (portc->audio_format == AFMT_IMA_ADPCM) + { + cnt /= 4; + } + else + { + if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */ + cnt >>= 1; + } + if (portc->channels > 1) + cnt >>= 1; + cnt--; + + if ((devc->audio_mode & PCM_ENABLE_OUTPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) && + intrflag && + cnt == devc->xfer_count) + { + devc->audio_mode |= PCM_ENABLE_OUTPUT; + devc->intr_active = 1; + return; /* + * Auto DMA mode on. No need to react + */ + } + spin_lock_irqsave(&devc->lock,flags); + + ad_write(devc, 15, (unsigned char) (cnt & 0xff)); + ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff)); + + devc->xfer_count = cnt; + devc->audio_mode |= PCM_ENABLE_OUTPUT; + devc->intr_active = 1; + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag) +{ + unsigned long flags, cnt; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + cnt = count; + if (portc->audio_format == AFMT_IMA_ADPCM) + { + cnt /= 4; + } + else + { + if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */ + cnt >>= 1; + } + if (portc->channels > 1) + cnt >>= 1; + cnt--; + + if ((devc->audio_mode & PCM_ENABLE_INPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) && + intrflag && + cnt == devc->xfer_count) + { + devc->audio_mode |= PCM_ENABLE_INPUT; + devc->intr_active = 1; + return; /* + * Auto DMA mode on. No need to react + */ + } + spin_lock_irqsave(&devc->lock,flags); + + if (devc->model == MD_1848) + { + ad_write(devc, 15, (unsigned char) (cnt & 0xff)); + ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff)); + } + else + { + ad_write(devc, 31, (unsigned char) (cnt & 0xff)); + ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff)); + } + + ad_unmute(devc); + + devc->xfer_count = cnt; + devc->audio_mode |= PCM_ENABLE_INPUT; + devc->intr_active = 1; + spin_unlock_irqrestore(&devc->lock,flags); +} + +static int ad1848_prepare_for_output(int dev, int bsize, int bcount) +{ + int timeout; + unsigned char fs, old_fs, tmp = 0; + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + ad_mute(devc); + + spin_lock_irqsave(&devc->lock,flags); + fs = portc->speed_bits | (portc->format_bits << 5); + + if (portc->channels > 1) + fs |= 0x10; + + ad_enter_MCE(devc); /* Enables changes to the format select reg */ + + if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* Use alternate speed select registers */ + { + fs &= 0xf0; /* Mask off the rate select bits */ + + ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */ + ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */ + } + old_fs = ad_read(devc, 8); + + if (devc->model == MD_4232 || devc->model >= MD_4236) + { + tmp = ad_read(devc, 16); + ad_write(devc, 16, tmp | 0x30); + } + if (devc->model == MD_IWAVE) + ad_write(devc, 17, 0xc2); /* Disable variable frequency select */ + + ad_write(devc, 8, fs); + + /* + * Write to I8 starts resynchronization. Wait until it completes. + */ + + timeout = 0; + while (timeout < 100 && inb(devc->base) != 0x80) + timeout++; + timeout = 0; + while (timeout < 10000 && inb(devc->base) == 0x80) + timeout++; + + if (devc->model >= MD_4232) + ad_write(devc, 16, tmp & ~0x30); + + ad_leave_MCE(devc); /* + * Starts the calibration process. + */ + spin_unlock_irqrestore(&devc->lock,flags); + devc->xfer_count = 0; + +#ifndef EXCLUDE_TIMERS + if (dev == timer_installed && devc->timer_running) + if ((fs & 0x01) != (old_fs & 0x01)) + { + ad1848_tmr_reprogram(dev); + } +#endif + ad1848_halt_output(dev); + return 0; +} + +static int ad1848_prepare_for_input(int dev, int bsize, int bcount) +{ + int timeout; + unsigned char fs, old_fs, tmp = 0; + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + if (devc->audio_mode) + return 0; + + spin_lock_irqsave(&devc->lock,flags); + fs = portc->speed_bits | (portc->format_bits << 5); + + if (portc->channels > 1) + fs |= 0x10; + + ad_enter_MCE(devc); /* Enables changes to the format select reg */ + + if ((devc->model == MD_1845) || (devc->model == MD_1845_SSCAPE)) /* Use alternate speed select registers */ + { + fs &= 0xf0; /* Mask off the rate select bits */ + + ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */ + ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */ + } + if (devc->model == MD_4232) + { + tmp = ad_read(devc, 16); + ad_write(devc, 16, tmp | 0x30); + } + if (devc->model == MD_IWAVE) + ad_write(devc, 17, 0xc2); /* Disable variable frequency select */ + + /* + * If mode >= 2 (CS4231), set I28. It's the capture format register. + */ + + if (devc->model != MD_1848) + { + old_fs = ad_read(devc, 28); + ad_write(devc, 28, fs); + + /* + * Write to I28 starts resynchronization. Wait until it completes. + */ + + timeout = 0; + while (timeout < 100 && inb(devc->base) != 0x80) + timeout++; + + timeout = 0; + while (timeout < 10000 && inb(devc->base) == 0x80) + timeout++; + + if (devc->model != MD_1848 && devc->model != MD_1845 && devc->model != MD_1845_SSCAPE) + { + /* + * CS4231 compatible devices don't have separate sampling rate selection + * register for recording an playback. The I8 register is shared so we have to + * set the speed encoding bits of it too. + */ + unsigned char tmp = portc->speed_bits | (ad_read(devc, 8) & 0xf0); + + ad_write(devc, 8, tmp); + /* + * Write to I8 starts resynchronization. Wait until it completes. + */ + timeout = 0; + while (timeout < 100 && inb(devc->base) != 0x80) + timeout++; + + timeout = 0; + while (timeout < 10000 && inb(devc->base) == 0x80) + timeout++; + } + } + else + { /* For AD1848 set I8. */ + + old_fs = ad_read(devc, 8); + ad_write(devc, 8, fs); + /* + * Write to I8 starts resynchronization. Wait until it completes. + */ + timeout = 0; + while (timeout < 100 && inb(devc->base) != 0x80) + timeout++; + timeout = 0; + while (timeout < 10000 && inb(devc->base) == 0x80) + timeout++; + } + + if (devc->model == MD_4232) + ad_write(devc, 16, tmp & ~0x30); + + ad_leave_MCE(devc); /* + * Starts the calibration process. + */ + spin_unlock_irqrestore(&devc->lock,flags); + devc->xfer_count = 0; + +#ifndef EXCLUDE_TIMERS + if (dev == timer_installed && devc->timer_running) + { + if ((fs & 0x01) != (old_fs & 0x01)) + { + ad1848_tmr_reprogram(dev); + } + } +#endif + ad1848_halt_input(dev); + return 0; +} + +static void ad1848_halt(int dev) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + + unsigned char bits = ad_read(devc, 9); + + if (bits & 0x01 && (portc->open_mode & OPEN_WRITE)) + ad1848_halt_output(dev); + + if (bits & 0x02 && (portc->open_mode & OPEN_READ)) + ad1848_halt_input(dev); + devc->audio_mode = 0; +} + +static void ad1848_halt_input(int dev) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + unsigned long flags; + + if (!(ad_read(devc, 9) & 0x02)) + return; /* Capture not enabled */ + + spin_lock_irqsave(&devc->lock,flags); + + ad_mute(devc); + + { + int tmout; + + if(!isa_dma_bridge_buggy) + disable_dma(audio_devs[dev]->dmap_in->dma); + + for (tmout = 0; tmout < 100000; tmout++) + if (ad_read(devc, 11) & 0x10) + break; + ad_write(devc, 9, ad_read(devc, 9) & ~0x02); /* Stop capture */ + + if(!isa_dma_bridge_buggy) + enable_dma(audio_devs[dev]->dmap_in->dma); + devc->audio_mode &= ~PCM_ENABLE_INPUT; + } + + outb(0, io_Status(devc)); /* Clear interrupt status */ + outb(0, io_Status(devc)); /* Clear interrupt status */ + + devc->audio_mode &= ~PCM_ENABLE_INPUT; + + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_halt_output(int dev) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + unsigned long flags; + + if (!(ad_read(devc, 9) & 0x01)) + return; /* Playback not enabled */ + + spin_lock_irqsave(&devc->lock,flags); + + ad_mute(devc); + { + int tmout; + + if(!isa_dma_bridge_buggy) + disable_dma(audio_devs[dev]->dmap_out->dma); + + for (tmout = 0; tmout < 100000; tmout++) + if (ad_read(devc, 11) & 0x10) + break; + ad_write(devc, 9, ad_read(devc, 9) & ~0x01); /* Stop playback */ + + if(!isa_dma_bridge_buggy) + enable_dma(audio_devs[dev]->dmap_out->dma); + + devc->audio_mode &= ~PCM_ENABLE_OUTPUT; + } + + outb((0), io_Status(devc)); /* Clear interrupt status */ + outb((0), io_Status(devc)); /* Clear interrupt status */ + + devc->audio_mode &= ~PCM_ENABLE_OUTPUT; + + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_trigger(int dev, int state) +{ + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; + unsigned long flags; + unsigned char tmp, old; + + spin_lock_irqsave(&devc->lock,flags); + state &= devc->audio_mode; + + tmp = old = ad_read(devc, 9); + + if (portc->open_mode & OPEN_READ) + { + if (state & PCM_ENABLE_INPUT) + tmp |= 0x02; + else + tmp &= ~0x02; + } + if (portc->open_mode & OPEN_WRITE) + { + if (state & PCM_ENABLE_OUTPUT) + tmp |= 0x01; + else + tmp &= ~0x01; + } + /* ad_mute(devc); */ + if (tmp != old) + { + ad_write(devc, 9, tmp); + ad_unmute(devc); + } + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_init_hw(ad1848_info * devc) +{ + int i; + int *init_values; + + /* + * Initial values for the indirect registers of CS4248/AD1848. + */ + static int init_values_a[] = + { + 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, + 0x00, 0x0c, 0x02, 0x00, 0x8a, 0x01, 0x00, 0x00, + + /* Positions 16 to 31 just for CS4231/2 and ad1845 */ + 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + static int init_values_b[] = + { + /* + Values for the newer chips + Some of the register initialization values were changed. In + order to get rid of the click that preceded PCM playback, + calibration was disabled on the 10th byte. On that same byte, + dual DMA was enabled; on the 11th byte, ADC dithering was + enabled, since that is theoretically desirable; on the 13th + byte, Mode 3 was selected, to enable access to extended + registers. + */ + 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x00, 0xe0, 0x01, 0x00, 0x00, + 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + /* + * Select initialisation data + */ + + init_values = init_values_a; + if(devc->model >= MD_4236) + init_values = init_values_b; + + for (i = 0; i < 16; i++) + ad_write(devc, i, init_values[i]); + + + ad_mute(devc); /* Initialize some variables */ + ad_unmute(devc); /* Leave it unmuted now */ + + if (devc->model > MD_1848) + { + if (devc->model == MD_1845_SSCAPE) + ad_write(devc, 12, ad_read(devc, 12) | 0x50); + else + ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */ + + if (devc->model == MD_IWAVE) + ad_write(devc, 12, 0x6c); /* Select codec mode 3 */ + + if (devc->model != MD_1845_SSCAPE) + for (i = 16; i < 32; i++) + ad_write(devc, i, init_values[i]); + + if (devc->model == MD_IWAVE) + ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */ + } + if (devc->model > MD_1848) + { + if (devc->audio_flags & DMA_DUPLEX) + ad_write(devc, 9, ad_read(devc, 9) & ~0x04); /* Dual DMA mode */ + else + ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */ + + if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) + ad_write(devc, 27, ad_read(devc, 27) | 0x08); /* Alternate freq select enabled */ + + if (devc->model == MD_IWAVE) + { /* Some magic Interwave specific initialization */ + ad_write(devc, 12, 0x6c); /* Select codec mode 3 */ + ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */ + ad_write(devc, 17, 0xc2); /* Alternate feature enable */ + } + } + else + { + devc->audio_flags &= ~DMA_DUPLEX; + ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */ + if (soundpro) + ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */ + } + + outb((0), io_Status(devc)); /* Clear pending interrupts */ + + /* + * Toggle the MCE bit. It completes the initialization phase. + */ + + ad_enter_MCE(devc); /* In case the bit was off */ + ad_leave_MCE(devc); + + ad1848_mixer_reset(devc); +} + +int ad1848_detect(struct resource *ports, int *ad_flags, int *osp) +{ + unsigned char tmp; + ad1848_info *devc = &adev_info[nr_ad1848_devs]; + unsigned char tmp1 = 0xff, tmp2 = 0xff; + int optiC930 = 0; /* OPTi 82C930 flag */ + int interwave = 0; + int ad1847_flag = 0; + int cs4248_flag = 0; + int sscape_flag = 0; + int io_base = ports->start; + + int i; + + DDB(printk("ad1848_detect(%x)\n", io_base)); + + if (ad_flags) + { + if (*ad_flags == 0x12345678) + { + interwave = 1; + *ad_flags = 0; + } + + if (*ad_flags == 0x87654321) + { + sscape_flag = 1; + *ad_flags = 0; + } + + if (*ad_flags == 0x12345677) + { + cs4248_flag = 1; + *ad_flags = 0; + } + } + if (nr_ad1848_devs >= MAX_AUDIO_DEV) + { + printk(KERN_ERR "ad1848 - Too many audio devices\n"); + return 0; + } + spin_lock_init(&devc->lock); + devc->base = io_base; + devc->irq_ok = 0; + devc->timer_running = 0; + devc->MCE_bit = 0x40; + devc->irq = 0; + devc->open_mode = 0; + devc->chip_name = devc->name = "AD1848"; + devc->model = MD_1848; /* AD1848 or CS4248 */ + devc->levels = NULL; + devc->debug_flag = 0; + + /* + * Check that the I/O address is in use. + * + * The bit 0x80 of the base I/O port is known to be 0 after the + * chip has performed its power on initialization. Just assume + * this has happened before the OS is starting. + * + * If the I/O address is unused, it typically returns 0xff. + */ + + if (inb(devc->base) == 0xff) + { + DDB(printk("ad1848_detect: The base I/O address appears to be dead\n")); + } + + /* + * Wait for the device to stop initialization + */ + + DDB(printk("ad1848_detect() - step 0\n")); + + for (i = 0; i < 10000000; i++) + { + unsigned char x = inb(devc->base); + + if (x == 0xff || !(x & 0x80)) + break; + } + + DDB(printk("ad1848_detect() - step A\n")); + + if (inb(devc->base) == 0x80) /* Not ready. Let's wait */ + ad_leave_MCE(devc); + + if ((inb(devc->base) & 0x80) != 0x00) /* Not a AD1848 */ + { + DDB(printk("ad1848 detect error - step A (%02x)\n", (int) inb(devc->base))); + return 0; + } + + /* + * Test if it's possible to change contents of the indirect registers. + * Registers 0 and 1 are ADC volume registers. The bit 0x10 is read only + * so try to avoid using it. + */ + + DDB(printk("ad1848_detect() - step B\n")); + ad_write(devc, 0, 0xaa); + ad_write(devc, 1, 0x45); /* 0x55 with bit 0x10 clear */ + + if ((tmp1 = ad_read(devc, 0)) != 0xaa || (tmp2 = ad_read(devc, 1)) != 0x45) + { + if (tmp2 == 0x65) /* AD1847 has couple of bits hardcoded to 1 */ + ad1847_flag = 1; + else + { + DDB(printk("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2)); + return 0; + } + } + DDB(printk("ad1848_detect() - step C\n")); + ad_write(devc, 0, 0x45); + ad_write(devc, 1, 0xaa); + + if ((tmp1 = ad_read(devc, 0)) != 0x45 || (tmp2 = ad_read(devc, 1)) != 0xaa) + { + if (tmp2 == 0x8a) /* AD1847 has few bits hardcoded to 1 */ + ad1847_flag = 1; + else + { + DDB(printk("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2)); + return 0; + } + } + + /* + * The indirect register I12 has some read only bits. Let's + * try to change them. + */ + + DDB(printk("ad1848_detect() - step D\n")); + tmp = ad_read(devc, 12); + ad_write(devc, 12, (~tmp) & 0x0f); + + if ((tmp & 0x0f) != ((tmp1 = ad_read(devc, 12)) & 0x0f)) + { + DDB(printk("ad1848 detect error - step D (%x)\n", tmp1)); + return 0; + } + + /* + * NOTE! Last 4 bits of the reg I12 tell the chip revision. + * 0x01=RevB and 0x0A=RevC. + */ + + /* + * The original AD1848/CS4248 has just 15 indirect registers. This means + * that I0 and I16 should return the same value (etc.). + * However this doesn't work with CS4248. Actually it seems to be impossible + * to detect if the chip is a CS4231 or CS4248. + * Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test fails + * with CS4231. + */ + + /* + * OPTi 82C930 has mode2 control bit in another place. This test will fail + * with it. Accept this situation as a possible indication of this chip. + */ + + DDB(printk("ad1848_detect() - step F\n")); + ad_write(devc, 12, 0); /* Mode2=disabled */ + + for (i = 0; i < 16; i++) + { + if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) + { + DDB(printk("ad1848 detect step F(%d/%x/%x) - OPTi chip???\n", i, tmp1, tmp2)); + if (!ad1847_flag) + optiC930 = 1; + break; + } + } + + /* + * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit (0x40). + * The bit 0x80 is always 1 in CS4248 and CS4231. + */ + + DDB(printk("ad1848_detect() - step G\n")); + + if (ad_flags && *ad_flags == 400) + *ad_flags = 0; + else + ad_write(devc, 12, 0x40); /* Set mode2, clear 0x80 */ + + + if (ad_flags) + *ad_flags = 0; + + tmp1 = ad_read(devc, 12); + if (tmp1 & 0x80) + { + if (ad_flags) + *ad_flags |= AD_F_CS4248; + + devc->chip_name = "CS4248"; /* Our best knowledge just now */ + } + if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40)) + { + /* + * CS4231 detected - is it? + * + * Verify that setting I0 doesn't change I16. + */ + + DDB(printk("ad1848_detect() - step H\n")); + ad_write(devc, 16, 0); /* Set I16 to known value */ + + ad_write(devc, 0, 0x45); + if ((tmp1 = ad_read(devc, 16)) != 0x45) /* No change -> CS4231? */ + { + ad_write(devc, 0, 0xaa); + if ((tmp1 = ad_read(devc, 16)) == 0xaa) /* Rotten bits? */ + { + DDB(printk("ad1848 detect error - step H(%x)\n", tmp1)); + return 0; + } + + /* + * Verify that some bits of I25 are read only. + */ + + DDB(printk("ad1848_detect() - step I\n")); + tmp1 = ad_read(devc, 25); /* Original bits */ + ad_write(devc, 25, ~tmp1); /* Invert all bits */ + if ((ad_read(devc, 25) & 0xe7) == (tmp1 & 0xe7)) + { + int id; + + /* + * It's at least CS4231 + */ + + devc->chip_name = "CS4231"; + devc->model = MD_4231; + + /* + * It could be an AD1845 or CS4231A as well. + * CS4231 and AD1845 report the same revision info in I25 + * while the CS4231A reports different. + */ + + id = ad_read(devc, 25); + if ((id & 0xe7) == 0x80) /* Device busy??? */ + id = ad_read(devc, 25); + if ((id & 0xe7) == 0x80) /* Device still busy??? */ + id = ad_read(devc, 25); + DDB(printk("ad1848_detect() - step J (%02x/%02x)\n", id, ad_read(devc, 25))); + + if ((id & 0xe7) == 0x80) { + /* + * It must be a CS4231 or AD1845. The register I23 of + * CS4231 is undefined and it appears to be read only. + * AD1845 uses I23 for setting sample rate. Assume + * the chip is AD1845 if I23 is changeable. + */ + + unsigned char tmp = ad_read(devc, 23); + ad_write(devc, 23, ~tmp); + + if (interwave) + { + devc->model = MD_IWAVE; + devc->chip_name = "IWave"; + } + else if (ad_read(devc, 23) != tmp) /* AD1845 ? */ + { + devc->chip_name = "AD1845"; + devc->model = MD_1845; + } + else if (cs4248_flag) + { + if (ad_flags) + *ad_flags |= AD_F_CS4248; + devc->chip_name = "CS4248"; + devc->model = MD_1848; + ad_write(devc, 12, ad_read(devc, 12) & ~0x40); /* Mode2 off */ + } + ad_write(devc, 23, tmp); /* Restore */ + } + else + { + switch (id & 0x1f) { + case 3: /* CS4236/CS4235/CS42xB/CS4239 */ + { + int xid; + ad_write(devc, 12, ad_read(devc, 12) | 0x60); /* switch to mode 3 */ + ad_write(devc, 23, 0x9c); /* select extended register 25 */ + xid = inb(io_Indexed_Data(devc)); + ad_write(devc, 12, ad_read(devc, 12) & ~0x60); /* back to mode 0 */ + switch (xid & 0x1f) + { + case 0x00: + devc->chip_name = "CS4237B(B)"; + devc->model = MD_42xB; + break; + case 0x08: + /* Seems to be a 4238 ?? */ + devc->chip_name = "CS4238"; + devc->model = MD_42xB; + break; + case 0x09: + devc->chip_name = "CS4238B"; + devc->model = MD_42xB; + break; + case 0x0b: + devc->chip_name = "CS4236B"; + devc->model = MD_4236; + break; + case 0x10: + devc->chip_name = "CS4237B"; + devc->model = MD_42xB; + break; + case 0x1d: + devc->chip_name = "CS4235"; + devc->model = MD_4235; + break; + case 0x1e: + devc->chip_name = "CS4239"; + devc->model = MD_4239; + break; + default: + printk("Chip ident is %X.\n", xid&0x1F); + devc->chip_name = "CS42xx"; + devc->model = MD_4232; + break; + } + } + break; + + case 2: /* CS4232/CS4232A */ + devc->chip_name = "CS4232"; + devc->model = MD_4232; + break; + + case 0: + if ((id & 0xe0) == 0xa0) + { + devc->chip_name = "CS4231A"; + devc->model = MD_4231A; + } + else + { + devc->chip_name = "CS4321"; + devc->model = MD_4231; + } + break; + + default: /* maybe */ + DDB(printk("ad1848: I25 = %02x/%02x\n", ad_read(devc, 25), ad_read(devc, 25) & 0xe7)); + if (optiC930) + { + devc->chip_name = "82C930"; + devc->model = MD_C930; + } + else + { + devc->chip_name = "CS4231"; + devc->model = MD_4231; + } + } + } + } + ad_write(devc, 25, tmp1); /* Restore bits */ + + DDB(printk("ad1848_detect() - step K\n")); + } + } else if (tmp1 == 0x0a) { + /* + * Is it perhaps a SoundPro CMI8330? + * If so, then we should be able to change indirect registers + * greater than I15 after activating MODE2, even though reading + * back I12 does not show it. + */ + + /* + * Let's try comparing register values + */ + for (i = 0; i < 16; i++) { + if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) { + DDB(printk("ad1848 detect step H(%d/%x/%x) - SoundPro chip?\n", i, tmp1, tmp2)); + soundpro = 1; + devc->chip_name = "SoundPro CMI 8330"; + break; + } + } + } + + DDB(printk("ad1848_detect() - step L\n")); + if (ad_flags) + { + if (devc->model != MD_1848) + *ad_flags |= AD_F_CS4231; + } + DDB(printk("ad1848_detect() - Detected OK\n")); + + if (devc->model == MD_1848 && ad1847_flag) + devc->chip_name = "AD1847"; + + + if (sscape_flag == 1) + devc->model = MD_1845_SSCAPE; + + return 1; +} + +int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback, + int dma_capture, int share_dma, int *osp, struct module *owner) +{ + /* + * NOTE! If irq < 0, there is another driver which has allocated the IRQ + * so that this driver doesn't need to allocate/deallocate it. + * The actually used IRQ is ABS(irq). + */ + + int my_dev; + char dev_name[100]; + int e; + + ad1848_info *devc = &adev_info[nr_ad1848_devs]; + + ad1848_port_info *portc = NULL; + + devc->irq = (irq > 0) ? irq : 0; + devc->open_mode = 0; + devc->timer_ticks = 0; + devc->dma1 = dma_playback; + devc->dma2 = dma_capture; + devc->subtype = cfg.card_subtype; + devc->audio_flags = DMA_AUTOMODE; + devc->playback_dev = devc->record_dev = 0; + if (name != NULL) + devc->name = name; + + if (name != NULL && name[0] != 0) + sprintf(dev_name, + "%s (%s)", name, devc->chip_name); + else + sprintf(dev_name, + "Generic audio codec (%s)", devc->chip_name); + + rename_region(ports, devc->name); + + conf_printf2(dev_name, devc->base, devc->irq, dma_playback, dma_capture); + + if (devc->model == MD_1848 || devc->model == MD_C930) + devc->audio_flags |= DMA_HARDSTOP; + + if (devc->model > MD_1848) + { + if (devc->dma1 == devc->dma2 || devc->dma2 == -1 || devc->dma1 == -1) + devc->audio_flags &= ~DMA_DUPLEX; + else + devc->audio_flags |= DMA_DUPLEX; + } + + portc = (ad1848_port_info *) kmalloc(sizeof(ad1848_port_info), GFP_KERNEL); + if(portc==NULL) { + release_region(devc->base, 4); + return -1; + } + + if ((my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, + dev_name, + &ad1848_audio_driver, + sizeof(struct audio_driver), + devc->audio_flags, + ad_format_mask[devc->model], + devc, + dma_playback, + dma_capture)) < 0) + { + release_region(devc->base, 4); + kfree(portc); + return -1; + } + + audio_devs[my_dev]->portc = portc; + audio_devs[my_dev]->mixer_dev = -1; + if (owner) + audio_devs[my_dev]->d->owner = owner; + memset((char *) portc, 0, sizeof(*portc)); + + nr_ad1848_devs++; + + devc->pmdev = pm_register(PM_ISA_DEV, my_dev, ad1848_pm_callback); + if (devc->pmdev) + devc->pmdev->data = devc; + + ad1848_init_hw(devc); + + if (irq > 0) + { + devc->dev_no = my_dev; + if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0) + { + printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n"); + /* Don't free it either then.. */ + devc->irq = 0; + } + if (capabilities[devc->model].flags & CAP_F_TIMER) + { +#ifndef CONFIG_SMP + int x; + unsigned char tmp = ad_read(devc, 16); +#endif + + devc->timer_ticks = 0; + + ad_write(devc, 21, 0x00); /* Timer MSB */ + ad_write(devc, 20, 0x10); /* Timer LSB */ +#ifndef CONFIG_SMP + ad_write(devc, 16, tmp | 0x40); /* Enable timer */ + for (x = 0; x < 100000 && devc->timer_ticks == 0; x++); + ad_write(devc, 16, tmp & ~0x40); /* Disable timer */ + + if (devc->timer_ticks == 0) + printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq); + else + { + DDB(printk("Interrupt test OK\n")); + devc->irq_ok = 1; + } +#else + devc->irq_ok = 1; +#endif + } + else + devc->irq_ok = 1; /* Couldn't test. assume it's OK */ + } else if (irq < 0) + irq2dev[-irq] = devc->dev_no = my_dev; + +#ifndef EXCLUDE_TIMERS + if ((capabilities[devc->model].flags & CAP_F_TIMER) && + devc->irq_ok) + ad1848_tmr_install(my_dev); +#endif + + if (!share_dma) + { + if (sound_alloc_dma(dma_playback, devc->name)) + printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback); + + if (dma_capture != dma_playback) + if (sound_alloc_dma(dma_capture, devc->name)) + printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_capture); + } + + if ((e = sound_install_mixer(MIXER_DRIVER_VERSION, + dev_name, + &ad1848_mixer_operations, + sizeof(struct mixer_operations), + devc)) >= 0) + { + audio_devs[my_dev]->mixer_dev = e; + if (owner) + mixer_devs[e]->owner = owner; + } + return my_dev; +} + +int ad1848_control(int cmd, int arg) +{ + ad1848_info *devc; + unsigned long flags; + + if (nr_ad1848_devs < 1) + return -ENODEV; + + devc = &adev_info[nr_ad1848_devs - 1]; + + switch (cmd) + { + case AD1848_SET_XTAL: /* Change clock frequency of AD1845 (only ) */ + if (devc->model != MD_1845 || devc->model != MD_1845_SSCAPE) + return -EINVAL; + spin_lock_irqsave(&devc->lock,flags); + ad_enter_MCE(devc); + ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5)); + ad_leave_MCE(devc); + spin_unlock_irqrestore(&devc->lock,flags); + break; + + case AD1848_MIXER_REROUTE: + { + int o = (arg >> 8) & 0xff; + int n = arg & 0xff; + + if (o < 0 || o >= SOUND_MIXER_NRDEVICES) + return -EINVAL; + + if (!(devc->supported_devices & (1 << o)) && + !(devc->supported_rec_devices & (1 << o))) + return -EINVAL; + + if (n == SOUND_MIXER_NONE) + { /* Just hide this control */ + ad1848_mixer_set(devc, o, 0); /* Shut up it */ + devc->supported_devices &= ~(1 << o); + devc->supported_rec_devices &= ~(1 << o); + break; + } + + /* Make the mixer control identified by o to appear as n */ + if (n < 0 || n >= SOUND_MIXER_NRDEVICES) + return -EINVAL; + + devc->mixer_reroute[n] = o; /* Rename the control */ + if (devc->supported_devices & (1 << o)) + devc->supported_devices |= (1 << n); + if (devc->supported_rec_devices & (1 << o)) + devc->supported_rec_devices |= (1 << n); + + devc->supported_devices &= ~(1 << o); + devc->supported_rec_devices &= ~(1 << o); + } + break; + } + return 0; +} + +void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int share_dma) +{ + int i, mixer, dev = 0; + ad1848_info *devc = NULL; + + for (i = 0; devc == NULL && i < nr_ad1848_devs; i++) + { + if (adev_info[i].base == io_base) + { + devc = &adev_info[i]; + dev = devc->dev_no; + } + } + + if (devc != NULL) + { + if(audio_devs[dev]->portc!=NULL) + kfree(audio_devs[dev]->portc); + release_region(devc->base, 4); + + if (!share_dma) + { + if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */ + free_irq(devc->irq, (void *)devc->dev_no); + + sound_free_dma(dma_playback); + + if (dma_playback != dma_capture) + sound_free_dma(dma_capture); + + } + mixer = audio_devs[devc->dev_no]->mixer_dev; + if(mixer>=0) + sound_unload_mixerdev(mixer); + + if (devc->pmdev) + pm_unregister(devc->pmdev); + + nr_ad1848_devs--; + for ( ; i < nr_ad1848_devs ; i++) + adev_info[i] = adev_info[i+1]; + } + else + printk(KERN_ERR "ad1848: Can't find device to be unloaded. Base=%x\n", io_base); +} + +irqreturn_t adintr(int irq, void *dev_id, struct pt_regs *dummy) +{ + unsigned char status; + ad1848_info *devc; + int dev; + int alt_stat = 0xff; + unsigned char c930_stat = 0; + int cnt = 0; + + dev = (int)dev_id; + devc = (ad1848_info *) audio_devs[dev]->devc; + +interrupt_again: /* Jump back here if int status doesn't reset */ + + status = inb(io_Status(devc)); + + if (status == 0x80) + printk(KERN_DEBUG "adintr: Why?\n"); + if (devc->model == MD_1848) + outb((0), io_Status(devc)); /* Clear interrupt status */ + + if (status & 0x01) + { + if (devc->model == MD_C930) + { /* 82C930 has interrupt status register in MAD16 register MC11 */ + + spin_lock(&devc->lock); + + /* 0xe0e is C930 address port + * 0xe0f is C930 data port + */ + outb(11, 0xe0e); + c930_stat = inb(0xe0f); + outb((~c930_stat), 0xe0f); + + spin_unlock(&devc->lock); + + alt_stat = (c930_stat << 2) & 0x30; + } + else if (devc->model != MD_1848) + { + spin_lock(&devc->lock); + alt_stat = ad_read(devc, 24); + ad_write(devc, 24, ad_read(devc, 24) & ~alt_stat); /* Selective ack */ + spin_unlock(&devc->lock); + } + + if ((devc->open_mode & OPEN_READ) && (devc->audio_mode & PCM_ENABLE_INPUT) && (alt_stat & 0x20)) + { + DMAbuf_inputintr(devc->record_dev); + } + if ((devc->open_mode & OPEN_WRITE) && (devc->audio_mode & PCM_ENABLE_OUTPUT) && + (alt_stat & 0x10)) + { + DMAbuf_outputintr(devc->playback_dev, 1); + } + if (devc->model != MD_1848 && (alt_stat & 0x40)) /* Timer interrupt */ + { + devc->timer_ticks++; +#ifndef EXCLUDE_TIMERS + if (timer_installed == dev && devc->timer_running) + sound_timer_interrupt(); +#endif + } + } +/* + * Sometimes playback or capture interrupts occur while a timer interrupt + * is being handled. The interrupt will not be retriggered if we don't + * handle it now. Check if an interrupt is still pending and restart + * the handler in this case. + */ + if (inb(io_Status(devc)) & 0x01 && cnt++ < 4) + { + goto interrupt_again; + } + return IRQ_HANDLED; +} + +/* + * Experimental initialization sequence for the integrated sound system + * of the Compaq Deskpro M. + */ + +static int init_deskpro_m(struct address_info *hw_config) +{ + unsigned char tmp; + + if ((tmp = inb(0xc44)) == 0xff) + { + DDB(printk("init_deskpro_m: Dead port 0xc44\n")); + return 0; + } + + outb(0x10, 0xc44); + outb(0x40, 0xc45); + outb(0x00, 0xc46); + outb(0xe8, 0xc47); + outb(0x14, 0xc44); + outb(0x40, 0xc45); + outb(0x00, 0xc46); + outb(0xe8, 0xc47); + outb(0x10, 0xc44); + + return 1; +} + +/* + * Experimental initialization sequence for the integrated sound system + * of Compaq Deskpro XL. + */ + +static int init_deskpro(struct address_info *hw_config) +{ + unsigned char tmp; + + if ((tmp = inb(0xc44)) == 0xff) + { + DDB(printk("init_deskpro: Dead port 0xc44\n")); + return 0; + } + outb((tmp | 0x04), 0xc44); /* Select bank 1 */ + if (inb(0xc44) != 0x04) + { + DDB(printk("init_deskpro: Invalid bank1 signature in port 0xc44\n")); + return 0; + } + /* + * OK. It looks like a Deskpro so let's proceed. + */ + + /* + * I/O port 0xc44 Audio configuration register. + * + * bits 0xc0: Audio revision bits + * 0x00 = Compaq Business Audio + * 0x40 = MS Sound System Compatible (reset default) + * 0x80 = Reserved + * 0xc0 = Reserved + * bit 0x20: No Wait State Enable + * 0x00 = Disabled (reset default, DMA mode) + * 0x20 = Enabled (programmed I/O mode) + * bit 0x10: MS Sound System Decode Enable + * 0x00 = Decoding disabled (reset default) + * 0x10 = Decoding enabled + * bit 0x08: FM Synthesis Decode Enable + * 0x00 = Decoding Disabled (reset default) + * 0x08 = Decoding enabled + * bit 0x04 Bank select + * 0x00 = Bank 0 + * 0x04 = Bank 1 + * bits 0x03 MSS Base address + * 0x00 = 0x530 (reset default) + * 0x01 = 0x604 + * 0x02 = 0xf40 + * 0x03 = 0xe80 + */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc44 (before): "); + outb((tmp & ~0x04), 0xc44); + printk("%02x ", inb(0xc44)); + outb((tmp | 0x04), 0xc44); + printk("%02x\n", inb(0xc44)); +#endif + + /* Set bank 1 of the register */ + tmp = 0x58; /* MSS Mode, MSS&FM decode enabled */ + + switch (hw_config->io_base) + { + case 0x530: + tmp |= 0x00; + break; + case 0x604: + tmp |= 0x01; + break; + case 0xf40: + tmp |= 0x02; + break; + case 0xe80: + tmp |= 0x03; + break; + default: + DDB(printk("init_deskpro: Invalid MSS port %x\n", hw_config->io_base)); + return 0; + } + outb((tmp & ~0x04), 0xc44); /* Write to bank=0 */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc44 (after): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc44)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc44)); +#endif + + /* + * I/O port 0xc45 FM Address Decode/MSS ID Register. + * + * bank=0, bits 0xfe: FM synthesis Decode Compare bits 7:1 (default=0x88) + * bank=0, bit 0x01: SBIC Power Control Bit + * 0x00 = Powered up + * 0x01 = Powered down + * bank=1, bits 0xfc: MSS ID (default=0x40) + */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc45 (before): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc45)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc45)); +#endif + + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + outb((0x88), 0xc45); /* FM base 7:0 = 0x88 */ + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + outb((0x10), 0xc45); /* MSS ID = 0x10 (MSS port returns 0x04) */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc45 (after): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc45)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc45)); +#endif + + + /* + * I/O port 0xc46 FM Address Decode/Address ASIC Revision Register. + * + * bank=0, bits 0xff: FM synthesis Decode Compare bits 15:8 (default=0x03) + * bank=1, bits 0xff: Audio addressing ASIC id + */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc46 (before): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc46)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc46)); +#endif + + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + outb((0x03), 0xc46); /* FM base 15:8 = 0x03 */ + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + outb((0x11), 0xc46); /* ASIC ID = 0x11 */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc46 (after): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc46)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc46)); +#endif + + /* + * I/O port 0xc47 FM Address Decode Register. + * + * bank=0, bits 0xff: Decode enable selection for various FM address bits + * bank=1, bits 0xff: Reserved + */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc47 (before): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc47)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc47)); +#endif + + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + outb((0x7c), 0xc47); /* FM decode enable bits = 0x7c */ + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + outb((0x00), 0xc47); /* Reserved bank1 = 0x00 */ + +#ifdef DEBUGXL + /* Debug printing */ + printk("Port 0xc47 (after): "); + outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ + printk("%02x ", inb(0xc47)); + outb((tmp | 0x04), 0xc44); /* Select bank=1 */ + printk("%02x\n", inb(0xc47)); +#endif + + /* + * I/O port 0xc6f = Audio Disable Function Register + */ + +#ifdef DEBUGXL + printk("Port 0xc6f (before) = %02x\n", inb(0xc6f)); +#endif + + outb((0x80), 0xc6f); + +#ifdef DEBUGXL + printk("Port 0xc6f (after) = %02x\n", inb(0xc6f)); +#endif + + return 1; +} + +int probe_ms_sound(struct address_info *hw_config, struct resource *ports) +{ + unsigned char tmp; + + DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype)); + + if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */ + { + /* check_opl3(0x388, hw_config); */ + return ad1848_detect(ports, NULL, hw_config->osp); + } + + if (deskpro_xl && hw_config->card_subtype == 2) /* Compaq Deskpro XL */ + { + if (!init_deskpro(hw_config)) + return 0; + } + + if (deskpro_m) /* Compaq Deskpro M */ + { + if (!init_deskpro_m(hw_config)) + return 0; + } + + /* + * Check if the IO port returns valid signature. The original MS Sound + * system returns 0x04 while some cards (AudioTrix Pro for example) + * return 0x00 or 0x0f. + */ + + if ((tmp = inb(hw_config->io_base + 3)) == 0xff) /* Bus float */ + { + int ret; + + DDB(printk("I/O address is inactive (%x)\n", tmp)); + if (!(ret = ad1848_detect(ports, NULL, hw_config->osp))) + return 0; + return 1; + } + DDB(printk("MSS signature = %x\n", tmp & 0x3f)); + if ((tmp & 0x3f) != 0x04 && + (tmp & 0x3f) != 0x0f && + (tmp & 0x3f) != 0x00) + { + int ret; + + MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, (int) inb(hw_config->io_base + 3))); + DDB(printk("Trying to detect codec anyway but IRQ/DMA may not work\n")); + if (!(ret = ad1848_detect(ports, NULL, hw_config->osp))) + return 0; + + hw_config->card_subtype = 1; + return 1; + } + if ((hw_config->irq != 5) && + (hw_config->irq != 7) && + (hw_config->irq != 9) && + (hw_config->irq != 10) && + (hw_config->irq != 11) && + (hw_config->irq != 12)) + { + printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq); + return 0; + } + if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3) + { + printk(KERN_ERR "MSS: Bad DMA %d\n", hw_config->dma); + return 0; + } + /* + * Check that DMA0 is not in use with a 8 bit board. + */ + + if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80) + { + printk(KERN_ERR "MSS: Can't use DMA0 with a 8 bit card/slot\n"); + return 0; + } + if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80) + { + printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq); + return 0; + } + return ad1848_detect(ports, NULL, hw_config->osp); +} + +void attach_ms_sound(struct address_info *hw_config, struct resource *ports, struct module *owner) +{ + static signed char interrupt_bits[12] = + { + -1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20 + }; + signed char bits; + char dma2_bit = 0; + + static char dma_bits[4] = + { + 1, 2, 0, 3 + }; + + int config_port = hw_config->io_base + 0; + int version_port = hw_config->io_base + 3; + int dma = hw_config->dma; + int dma2 = hw_config->dma2; + + if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */ + { + hw_config->slots[0] = ad1848_init("MS Sound System", ports, + hw_config->irq, + hw_config->dma, + hw_config->dma2, 0, + hw_config->osp, + owner); + return; + } + /* + * Set the IRQ and DMA addresses. + */ + + bits = interrupt_bits[hw_config->irq]; + if (bits == -1) + { + printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq); + release_region(ports->start, 4); + release_region(ports->start - 4, 4); + return; + } + outb((bits | 0x40), config_port); + if ((inb(version_port) & 0x40) == 0) + printk(KERN_ERR "[MSS: IRQ Conflict?]\n"); + +/* + * Handle the capture DMA channel + */ + + if (dma2 != -1 && dma2 != dma) + { + if (!((dma == 0 && dma2 == 1) || + (dma == 1 && dma2 == 0) || + (dma == 3 && dma2 == 0))) + { /* Unsupported combination. Try to swap channels */ + int tmp = dma; + + dma = dma2; + dma2 = tmp; + } + if ((dma == 0 && dma2 == 1) || + (dma == 1 && dma2 == 0) || + (dma == 3 && dma2 == 0)) + { + dma2_bit = 0x04; /* Enable capture DMA */ + } + else + { + printk(KERN_WARNING "MSS: Invalid capture DMA\n"); + dma2 = dma; + } + } + else + { + dma2 = dma; + } + + hw_config->dma = dma; + hw_config->dma2 = dma2; + + outb((bits | dma_bits[dma] | dma2_bit), config_port); /* Write IRQ+DMA setup */ + + hw_config->slots[0] = ad1848_init("MS Sound System", ports, + hw_config->irq, + dma, dma2, 0, + hw_config->osp, + THIS_MODULE); +} + +void unload_ms_sound(struct address_info *hw_config) +{ + ad1848_unload(hw_config->io_base + 4, + hw_config->irq, + hw_config->dma, + hw_config->dma2, 0); + sound_unload_audiodev(hw_config->slots[0]); + release_region(hw_config->io_base, 4); +} + +#ifndef EXCLUDE_TIMERS + +/* + * Timer stuff (for /dev/music). + */ + +static unsigned int current_interval; + +static unsigned int ad1848_tmr_start(int dev, unsigned int usecs) +{ + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + unsigned long xtal_nsecs; /* nanoseconds per xtal oscillator tick */ + unsigned long divider; + + spin_lock_irqsave(&devc->lock,flags); + + /* + * Length of the timer interval (in nanoseconds) depends on the + * selected crystal oscillator. Check this from bit 0x01 of I8. + * + * AD1845 has just one oscillator which has cycle time of 10.050 us + * (when a 24.576 MHz xtal oscillator is used). + * + * Convert requested interval to nanoseconds before computing + * the timer divider. + */ + + if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) + xtal_nsecs = 10050; + else if (ad_read(devc, 8) & 0x01) + xtal_nsecs = 9920; + else + xtal_nsecs = 9969; + + divider = (usecs * 1000 + xtal_nsecs / 2) / xtal_nsecs; + + if (divider < 100) /* Don't allow shorter intervals than about 1ms */ + divider = 100; + + if (divider > 65535) /* Overflow check */ + divider = 65535; + + ad_write(devc, 21, (divider >> 8) & 0xff); /* Set upper bits */ + ad_write(devc, 20, divider & 0xff); /* Set lower bits */ + ad_write(devc, 16, ad_read(devc, 16) | 0x40); /* Start the timer */ + devc->timer_running = 1; + spin_unlock_irqrestore(&devc->lock,flags); + + return current_interval = (divider * xtal_nsecs + 500) / 1000; +} + +static void ad1848_tmr_reprogram(int dev) +{ + /* + * Audio driver has changed sampling rate so that a different xtal + * oscillator was selected. We have to reprogram the timer rate. + */ + + ad1848_tmr_start(dev, current_interval); + sound_timer_syncinterval(current_interval); +} + +static void ad1848_tmr_disable(int dev) +{ + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + + spin_lock_irqsave(&devc->lock,flags); + ad_write(devc, 16, ad_read(devc, 16) & ~0x40); + devc->timer_running = 0; + spin_unlock_irqrestore(&devc->lock,flags); +} + +static void ad1848_tmr_restart(int dev) +{ + unsigned long flags; + ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; + + if (current_interval == 0) + return; + + spin_lock_irqsave(&devc->lock,flags); + ad_write(devc, 16, ad_read(devc, 16) | 0x40); + devc->timer_running = 1; + spin_unlock_irqrestore(&devc->lock,flags); +} + +static struct sound_lowlev_timer ad1848_tmr = +{ + 0, + 2, + ad1848_tmr_start, + ad1848_tmr_disable, + ad1848_tmr_restart +}; + +static int ad1848_tmr_install(int dev) +{ + if (timer_installed != -1) + return 0; /* Don't install another timer */ + + timer_installed = ad1848_tmr.dev = dev; + sound_timer_init(&ad1848_tmr, audio_devs[dev]->name); + + return 1; +} +#endif /* EXCLUDE_TIMERS */ + +static int ad1848_suspend(ad1848_info *devc) +{ + unsigned long flags; + + spin_lock_irqsave(&devc->lock,flags); + + ad_mute(devc); + + spin_unlock_irqrestore(&devc->lock,flags); + return 0; +} + +static int ad1848_resume(ad1848_info *devc) +{ + int mixer_levels[32], i; + + /* Thinkpad is a bit more of PITA than normal. The BIOS tends to + restore it in a different config to the one we use. Need to + fix this somehow */ + + /* store old mixer levels */ + memcpy(mixer_levels, devc->levels, sizeof (mixer_levels)); + ad1848_init_hw(devc); + + /* restore mixer levels */ + for (i = 0; i < 32; i++) + ad1848_mixer_set(devc, devc->dev_no, mixer_levels[i]); + + if (!devc->subtype) { + static signed char interrupt_bits[12] = { -1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20 }; + static char dma_bits[4] = { 1, 2, 0, 3 }; + unsigned long flags; + signed char bits; + char dma2_bit = 0; + + int config_port = devc->base + 0; + + bits = interrupt_bits[devc->irq]; + if (bits == -1) { + printk(KERN_ERR "MSS: Bad IRQ %d\n", devc->irq); + return -1; + } + + spin_lock_irqsave(&devc->lock,flags); + + outb((bits | 0x40), config_port); + + if (devc->dma2 != -1 && devc->dma2 != devc->dma1) + if ( (devc->dma1 == 0 && devc->dma2 == 1) || + (devc->dma1 == 1 && devc->dma2 == 0) || + (devc->dma1 == 3 && devc->dma2 == 0)) + dma2_bit = 0x04; + + outb((bits | dma_bits[devc->dma1] | dma2_bit), config_port); + spin_unlock_irqrestore(&devc->lock,flags); + } + + return 0; +} + +static int ad1848_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *data) +{ + ad1848_info *devc = dev->data; + if (devc) { + DEB(printk("ad1848: pm event received: 0x%x\n", rqst)); + + switch (rqst) { + case PM_SUSPEND: + ad1848_suspend(devc); + break; + case PM_RESUME: + ad1848_resume(devc); + break; + } + } + return 0; +} + + +EXPORT_SYMBOL(ad1848_detect); +EXPORT_SYMBOL(ad1848_init); +EXPORT_SYMBOL(ad1848_unload); +EXPORT_SYMBOL(ad1848_control); +EXPORT_SYMBOL(adintr); +EXPORT_SYMBOL(probe_ms_sound); +EXPORT_SYMBOL(attach_ms_sound); +EXPORT_SYMBOL(unload_ms_sound); + +static int __initdata io = -1; +static int __initdata irq = -1; +static int __initdata dma = -1; +static int __initdata dma2 = -1; +static int __initdata type = 0; + +module_param(io, int, 0); /* I/O for a raw AD1848 card */ +module_param(irq, int, 0); /* IRQ to use */ +module_param(dma, int, 0); /* First DMA channel */ +module_param(dma2, int, 0); /* Second DMA channel */ +module_param(type, int, 0); /* Card type */ +module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */ +module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */ +module_param(soundpro, bool, 0); /* More special magic for SoundPro chips */ + +#ifdef CONFIG_PNP +module_param(isapnp, int, 0); +module_param(isapnpjump, int, 0); +module_param(reverse, bool, 0); +MODULE_PARM_DESC(isapnp, "When set to 0, Plug & Play support will be disabled"); +MODULE_PARM_DESC(isapnpjump, "Jumps to a specific slot in the driver's PnP table. Use the source, Luke."); +MODULE_PARM_DESC(reverse, "When set to 1, will reverse ISAPnP search order"); + +static struct pnp_dev *ad1848_dev = NULL; + +/* Please add new entries at the end of the table */ +static struct { + char *name; + unsigned short card_vendor, card_device, + vendor, function; + short mss_io, irq, dma, dma2; /* index into isapnp table */ + int type; +} ad1848_isapnp_list[] __initdata = { + {"CMI 8330 SoundPRO", + ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001), + ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), + 0, 0, 0,-1, 0}, + {"CS4232 based card", + ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), + 0, 0, 0, 1, 0}, + {"CS4232 based card", + ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), + 0, 0, 0, 1, 0}, + {"OPL3-SA2 WSS mode", + ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), + 1, 0, 0, 1, 1}, + {"Advanced Gravis InterWave Audio", + ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001), + ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), + 0, 0, 0, 1, 0}, + {NULL} +}; + +static struct isapnp_device_id id_table[] __devinitdata = { + { ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001), + ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 }, + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 }, + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 }, + /* The main driver for this card is opl3sa2 + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 }, + */ + { ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001), + ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 }, + {0} +}; + +MODULE_DEVICE_TABLE(isapnp, id_table); + +static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev) +{ + int err; + + err = pnp_device_attach(dev); + if (err < 0) + return(NULL); + + if((err = pnp_activate_dev(dev)) < 0) { + printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err); + + pnp_device_detach(dev); + + return(NULL); + } + audio_activated = 1; + return(dev); +} + +static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot) +{ + + /* Configure Audio device */ + if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL))) + { + if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev))) + { + hw_config->io_base = pnp_port_start(ad1848_dev, ad1848_isapnp_list[slot].mss_io); + hw_config->irq = pnp_irq(ad1848_dev, ad1848_isapnp_list[slot].irq); + hw_config->dma = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma); + if(ad1848_isapnp_list[slot].dma2 != -1) + hw_config->dma2 = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma2); + else + hw_config->dma2 = -1; + hw_config->card_subtype = ad1848_isapnp_list[slot].type; + } else + return(NULL); + } else + return(NULL); + + return(ad1848_dev); +} + +static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot) +{ + char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name; + + /* Initialize this baby. */ + + if(ad1848_init_generic(bus, hw_config, slot)) { + /* We got it. */ + + printk(KERN_NOTICE "ad1848: PnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n", + busname, + hw_config->io_base, hw_config->irq, hw_config->dma, + hw_config->dma2); + return 1; + } + return 0; +} + +static int __init ad1848_isapnp_probe(struct address_info *hw_config) +{ + static int first = 1; + int i; + + /* Count entries in sb_isapnp_list */ + for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++); + i--; + + /* Check and adjust isapnpjump */ + if( isapnpjump < 0 || isapnpjump > i) { + isapnpjump = reverse ? i : 0; + printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump); + } + + if(!first || !reverse) + i = isapnpjump; + first = 0; + while(ad1848_isapnp_list[i].card_vendor != 0) { + static struct pnp_card *bus = NULL; + + while ((bus = pnp_find_card( + ad1848_isapnp_list[i].card_vendor, + ad1848_isapnp_list[i].card_device, + bus))) { + + if(ad1848_isapnp_init(hw_config, bus, i)) { + isapnpjump = i; /* start next search from here */ + return 0; + } + } + i += reverse ? -1 : 1; + } + + return -ENODEV; +} +#endif + + +static int __init init_ad1848(void) +{ + printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n"); + +#ifdef CONFIG_PNP + if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) { + printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n"); + isapnp = 0; + } +#endif + + if(io != -1) { + struct resource *ports; + if( isapnp == 0 ) + { + if(irq == -1 || dma == -1) { + printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n"); + return -EINVAL; + } + + cfg.irq = irq; + cfg.io_base = io; + cfg.dma = dma; + cfg.dma2 = dma2; + cfg.card_subtype = type; + } + + ports = request_region(io + 4, 4, "ad1848"); + + if (!ports) + return -EBUSY; + + if (!request_region(io, 4, "WSS config")) { + release_region(io + 4, 4); + return -EBUSY; + } + + if (!probe_ms_sound(&cfg, ports)) { + release_region(io + 4, 4); + release_region(io, 4); + return -ENODEV; + } + attach_ms_sound(&cfg, ports, THIS_MODULE); + loaded = 1; + } + return 0; +} + +static void __exit cleanup_ad1848(void) +{ + if(loaded) + unload_ms_sound(&cfg); + +#ifdef CONFIG_PNP + if(ad1848_dev){ + if(audio_activated) + pnp_device_detach(ad1848_dev); + } +#endif +} + +module_init(init_ad1848); +module_exit(cleanup_ad1848); + +#ifndef MODULE +static int __init setup_ad1848(char *str) +{ + /* io, irq, dma, dma2, type */ + int ints[6]; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + io = ints[1]; + irq = ints[2]; + dma = ints[3]; + dma2 = ints[4]; + type = ints[5]; + + return 1; +} + +__setup("ad1848=", setup_ad1848); +#endif +MODULE_LICENSE("GPL"); |