summaryrefslogtreecommitdiff
path: root/sound/pci/emu10k1/emu10k1_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/emu10k1/emu10k1_main.c')
-rw-r--r--sound/pci/emu10k1/emu10k1_main.c129
1 files changed, 109 insertions, 20 deletions
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index dbc805c33fc4..404ae1be0a4b 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -51,9 +51,15 @@
#define HANA_FILENAME "emu/hana.fw"
#define DOCK_FILENAME "emu/audio_dock.fw"
+#define EMU1010B_FILENAME "emu/emu1010b.fw"
+#define MICRO_DOCK_FILENAME "emu/micro_dock.fw"
+#define EMU1010_NOTEBOOK_FILENAME "emu/emu1010_notebook.fw"
MODULE_FIRMWARE(HANA_FILENAME);
MODULE_FIRMWARE(DOCK_FILENAME);
+MODULE_FIRMWARE(EMU1010B_FILENAME);
+MODULE_FIRMWARE(MICRO_DOCK_FILENAME);
+MODULE_FIRMWARE(EMU1010_NOTEBOOK_FILENAME);
/*************************************************************************
@@ -660,10 +666,12 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * file
return err;
}
snd_printk(KERN_INFO "firmware size=0x%zx\n", fw_entry->size);
+#if 0
if (fw_entry->size != 0x133a4) {
snd_printk(KERN_ERR "firmware: %s wrong size.\n",filename);
return -EINVAL;
}
+#endif
/* The FPGA is a Xilinx Spartan IIE XC2S50E */
/* GPIO7 -> FPGA PGMN
@@ -694,6 +702,37 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * file
return 0;
}
+/*
+ * EMU-1010 - details found out from this driver, official MS Win drivers,
+ * testing the card:
+ *
+ * Audigy2 (aka Alice2):
+ * ---------------------
+ * * communication over PCI
+ * * conversion of 32-bit data coming over EMU32 links from HANA FPGA
+ * to 2 x 16-bit, using internal DSP instructions
+ * * slave mode, clock supplied by HANA
+ * * linked to HANA using:
+ * 32 x 32-bit serial EMU32 output channels
+ * 16 x EMU32 input channels
+ * (?) x I2S I/O channels (?)
+ *
+ * FPGA (aka HANA):
+ * ---------------
+ * * provides all (?) physical inputs and outputs of the card
+ * (ADC, DAC, SPDIF I/O, ADAT I/O, etc.)
+ * * provides clock signal for the card and Alice2
+ * * two crystals - for 44.1kHz and 48kHz multiples
+ * * provides internal routing of signal sources to signal destinations
+ * * inputs/outputs to Alice2 - see above
+ *
+ * Current status of the driver:
+ * ----------------------------
+ * * only 44.1/48kHz supported (the MS Win driver supports up to 192 kHz)
+ * * PCM device nb. 2:
+ * 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops
+ * 16 x 32-bit capture - snd_emu10k1_capture_efx_ops
+ */
static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
{
unsigned int i;
@@ -727,7 +766,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
snd_printdd("reg1=0x%x\n",reg);
- if (reg == 0x55) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
@@ -735,19 +774,32 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
}
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
snd_printdd("reg2=0x%x\n",reg);
- if (reg == 0x55) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
+ snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
- if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
- snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
- return err;
+ if (emu->card_capabilities->emu1010 == 1) {
+ if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 2) {
+ if ((err = snd_emu1010_load_firmware(emu, EMU1010B_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010B_FILENAME);
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, EMU1010_NOTEBOOK_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010_NOTEBOOK_FILENAME);
+ return err;
+ }
}
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
- if (reg != 0x55) {
+ if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg);
return -ENODEV;
@@ -850,6 +902,27 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
EMU_DST_ALICE2_EMU32_6, EMU_SRC_DOCK_ADC2_LEFT1);
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_ALICE2_EMU32_7, EMU_SRC_DOCK_ADC2_RIGHT1);
+ /* Pavel Hofman - setting defaults for 8 more capture channels
+ * Defaults only, users will set their own values anyways, let's
+ * just copy/paste.
+ */
+
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_8, EMU_SRC_DOCK_MIC_A1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_9, EMU_SRC_DOCK_MIC_B1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_A, EMU_SRC_HAMOA_ADC_LEFT2);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_B, EMU_SRC_HAMOA_ADC_LEFT2);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_C, EMU_SRC_DOCK_ADC1_LEFT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_D, EMU_SRC_DOCK_ADC1_RIGHT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_E, EMU_SRC_DOCK_ADC2_LEFT1);
+ snd_emu1010_fpga_link_dst_src_write(emu,
+ EMU_DST_ALICE2_EMU32_F, EMU_SRC_DOCK_ADC2_RIGHT1);
#endif
#if 0
/* Original */
@@ -943,16 +1016,27 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
/* Return to Audio Dock programming mode */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
- if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
- return err;
+ if (emu->card_capabilities->emu1010 == 1) {
+ if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 2) {
+ if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ return err;
+ }
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ return err;
+ }
}
+
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &reg );
snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg);
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg );
snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
- if (reg != 0x55) {
+ if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
return 0;
@@ -1227,9 +1311,15 @@ static struct snd_emu_chip_details emu_chip_details[] = {
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
- .spi_dac = 1,
- .i2c_adc = 1,
- .spk71 = 1} ,
+ .spk71 = 1 ,
+ .emu1010 = 3} ,
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
+ .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]",
+ .id = "EMU1010",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1 ,
+ .emu1010 = 2} ,
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",
.id = "Audigy2",
@@ -1511,7 +1601,6 @@ int __devinit snd_emu10k1_create(struct snd_card *card,
struct snd_emu10k1 *emu;
int idx, err;
int is_audigy;
- unsigned char revision;
unsigned int silent_page;
const struct snd_emu_chip_details *c;
static struct snd_device_ops ops = {
@@ -1543,8 +1632,7 @@ int __devinit snd_emu10k1_create(struct snd_card *card,
emu->synth = NULL;
emu->get_synth_voice = NULL;
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
- emu->revision = revision;
+ emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
@@ -1665,12 +1753,13 @@ int __devinit snd_emu10k1_create(struct snd_card *card,
emu->fx8010.extout_mask = extout_mask;
emu->enable_ir = enable_ir;
+ if (emu->card_capabilities->ca_cardbus_chip) {
+ if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
+ goto error;
+ }
if (emu->card_capabilities->ecard) {
if ((err = snd_emu10k1_ecard_init(emu)) < 0)
goto error;
- } else if (emu->card_capabilities->ca_cardbus_chip) {
- if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
- goto error;
} else if (emu->card_capabilities->emu1010) {
if ((err = snd_emu10k1_emu1010_init(emu)) < 0) {
snd_emu10k1_free(emu);
@@ -1816,10 +1905,10 @@ void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu)
void snd_emu10k1_resume_init(struct snd_emu10k1 *emu)
{
+ if (emu->card_capabilities->ca_cardbus_chip)
+ snd_emu10k1_cardbus_init(emu);
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
- else if (emu->card_capabilities->ca_cardbus_chip)
- snd_emu10k1_cardbus_init(emu);
else if (emu->card_capabilities->emu1010)
snd_emu10k1_emu1010_init(emu);
else
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 03:22:46 +0000