summaryrefslogtreecommitdiff
path: root/sound/pci/hda/alc260_quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/hda/alc260_quirks.c')
-rw-r--r--sound/pci/hda/alc260_quirks.c1272
1 files changed, 1272 insertions, 0 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
new file mode 100644
index 000000000000..21ec2cb100b0
--- /dev/null
+++ b/sound/pci/hda/alc260_quirks.c
@@ -0,0 +1,1272 @@
+/*
+ * ALC260 quirk models
+ * included by patch_realtek.c
+ */
+
+/* ALC260 models */
+enum {
+ ALC260_AUTO,
+ ALC260_BASIC,
+ ALC260_HP,
+ ALC260_HP_DC7600,
+ ALC260_HP_3013,
+ ALC260_FUJITSU_S702X,
+ ALC260_ACER,
+ ALC260_WILL,
+ ALC260_REPLACER_672V,
+ ALC260_FAVORIT100,
+#ifdef CONFIG_SND_DEBUG
+ ALC260_TEST,
+#endif
+ ALC260_MODEL_LAST /* last tag */
+};
+
+static const hda_nid_t alc260_dac_nids[1] = {
+ /* front */
+ 0x02,
+};
+
+static const hda_nid_t alc260_adc_nids[1] = {
+ /* ADC0 */
+ 0x04,
+};
+
+static const hda_nid_t alc260_adc_nids_alt[1] = {
+ /* ADC1 */
+ 0x05,
+};
+
+/* NIDs used when simultaneous access to both ADCs makes sense. Note that
+ * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
+ */
+static const hda_nid_t alc260_dual_adc_nids[2] = {
+ /* ADC0, ADC1 */
+ 0x04, 0x05
+};
+
+#define ALC260_DIGOUT_NID 0x03
+#define ALC260_DIGIN_NID 0x06
+
+static const struct hda_input_mux alc260_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
+ * headphone jack and the internal CD lines since these are the only pins at
+ * which audio can appear. For flexibility, also allow the option of
+ * recording the mixer output on the second ADC (ADC0 doesn't have a
+ * connection to the mixer output).
+ */
+static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
+ {
+ .num_items = 3,
+ .items = {
+ { "Mic/Line", 0x0 },
+ { "CD", 0x4 },
+ { "Headphone", 0x2 },
+ },
+ },
+ {
+ .num_items = 4,
+ .items = {
+ { "Mic/Line", 0x0 },
+ { "CD", 0x4 },
+ { "Headphone", 0x2 },
+ { "Mixer", 0x5 },
+ },
+ },
+
+};
+
+/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
+ * the Fujitsu S702x, but jacks are marked differently.
+ */
+static const struct hda_input_mux alc260_acer_capture_sources[2] = {
+ {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ { "Headphone", 0x5 },
+ },
+ },
+ {
+ .num_items = 5,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ { "Headphone", 0x6 },
+ { "Mixer", 0x5 },
+ },
+ },
+};
+
+/* Maxdata Favorit 100XS */
+static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
+ {
+ .num_items = 2,
+ .items = {
+ { "Line/Mic", 0x0 },
+ { "CD", 0x4 },
+ },
+ },
+ {
+ .num_items = 3,
+ .items = {
+ { "Line/Mic", 0x0 },
+ { "CD", 0x4 },
+ { "Mixer", 0x5 },
+ },
+ },
+};
+
+/*
+ * This is just place-holder, so there's something for alc_build_pcms to look
+ * at when it calculates the maximum number of channels. ALC260 has no mixer
+ * element which allows changing the channel mode, so the verb list is
+ * never used.
+ */
+static const struct hda_channel_mode alc260_modes[1] = {
+ { 2, NULL },
+};
+
+
+/* Mixer combinations
+ *
+ * basic: base_output + input + pc_beep + capture
+ * HP: base_output + input + capture_alt
+ * HP_3013: hp_3013 + input + capture
+ * fujitsu: fujitsu + capture
+ * acer: acer + capture
+ */
+
+static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+ { } /* end */
+};
+
+static const struct snd_kcontrol_new alc260_input_mixer[] = {
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
+ { } /* end */
+};
+
+/* update HP, line and mono out pins according to the master switch */
+static void alc260_hp_master_update(struct hda_codec *codec)
+{
+ update_speakers(codec);
+}
+
+static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ *ucontrol->value.integer.value = !spec->master_mute;
+ return 0;
+}
+
+static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ int val = !*ucontrol->value.integer.value;
+
+ if (val == spec->master_mute)
+ return 0;
+ spec->master_mute = val;
+ alc260_hp_master_update(codec);
+ return 1;
+}
+
+static const struct snd_kcontrol_new alc260_hp_output_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+ .info = snd_ctl_boolean_mono_info,
+ .get = alc260_hp_master_sw_get,
+ .put = alc260_hp_master_sw_put,
+ },
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+ { } /* end */
+};
+
+static const struct hda_verb alc260_hp_unsol_verbs[] = {
+ {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {},
+};
+
+static void alc260_hp_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x0f;
+ spec->autocfg.speaker_pins[0] = 0x10;
+ spec->autocfg.speaker_pins[1] = 0x11;
+ spec->automute = 1;
+ spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
+ .info = snd_ctl_boolean_mono_info,
+ .get = alc260_hp_master_sw_get,
+ .put = alc260_hp_master_sw_put,
+ },
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
+static void alc260_hp_3013_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x10;
+ spec->autocfg.speaker_pins[1] = 0x11;
+ spec->automute = 1;
+ spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = {
+ .ops = &snd_hda_bind_vol,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT),
+ 0
+ },
+};
+
+static const struct hda_bind_ctls alc260_dc7600_bind_switch = {
+ .ops = &snd_hda_bind_sw,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
+ 0
+ },
+};
+
+static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = {
+ HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol),
+ HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
+static const struct hda_verb alc260_hp_3013_unsol_verbs[] = {
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {},
+};
+
+static void alc260_hp_3012_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x10;
+ spec->autocfg.speaker_pins[0] = 0x0f;
+ spec->autocfg.speaker_pins[1] = 0x11;
+ spec->autocfg.speaker_pins[2] = 0x15;
+ spec->automute = 1;
+ spec->automute_mode = ALC_AUTOMUTE_PIN;
+}
+
+/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
+ * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
+ */
+static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
+ ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+ { } /* end */
+};
+
+/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current
+ * versions of the ALC260 don't act on requests to enable mic bias from NID
+ * 0x0f (used to drive the headphone jack in these laptops). The ALC260
+ * datasheet doesn't mention this restriction. At this stage it's not clear
+ * whether this behaviour is intentional or is a hardware bug in chip
+ * revisions available in early 2006. Therefore for now allow the
+ * "Headphone Jack Mode" control to span all choices, but if it turns out
+ * that the lack of mic bias for this NID is intentional we could change the
+ * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
+ * don't appear to make the mic bias available from the "line" jack, even
+ * though the NID used for this jack (0x14) can supply it. The theory is
+ * that perhaps Acer have included blocking capacitors between the ALC260
+ * and the output jack. If this turns out to be the case for all such
+ * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
+ * to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * The C20x Tablet series have a mono internal speaker which is controlled
+ * via the chip's Mono sum widget and pin complex, so include the necessary
+ * controls for such models. On models without a "mono speaker" the control
+ * won't do anything.
+ */
+static const struct snd_kcontrol_new alc260_acer_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+ ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
+ HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ { } /* end */
+};
+
+/* Maxdata Favorit 100XS: one output and one input (0x12) jack
+ */
+static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+ ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ { } /* end */
+};
+
+/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
+ * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17.
+ */
+static const struct snd_kcontrol_new alc260_will_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ { } /* end */
+};
+
+/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
+ * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
+ */
+static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ { } /* end */
+};
+
+/*
+ * initialization verbs
+ */
+static const struct hda_verb alc260_init_verbs[] = {
+ /* Line In pin widget for input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* CD pin widget for input */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ /* LINE-2 is used for line-out in rear */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ /* select line-out */
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* LINE-OUT pin */
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ /* enable HP */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* enable Mono */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ /* mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* set connection select to line in (default select for this ADC) */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* mute capture amp left and right */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* set connection select to line in (default select for this ADC) */
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* set vol=0 Line-Out mixer amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* unmute pin widget amp left and right (no gain on this amp) */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* set vol=0 HP mixer amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* unmute pin widget amp left and right (no gain on this amp) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* set vol=0 Mono mixer amp left and right */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* unmute pin widget amp left and right (no gain on this amp) */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* unmute LINE-2 out pin */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
+ /* mute analog inputs */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+ /* mute Front out path */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* mute Headphone out path */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* mute Mono out path */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ { }
+};
+
+#if 0 /* should be identical with alc260_init_verbs? */
+static const struct hda_verb alc260_hp_init_verbs[] = {
+ /* Headphone and output */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ /* mono output */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Line In pin widget for input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* Line-2 pin widget for output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* CD pin widget for input */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* unmute amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+ /* set connection select to line in (default select for this ADC) */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* unmute Line-Out mixer amp left and right (volume = 0) */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* unmute HP mixer amp left and right (volume = 0) */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
+ /* mute analog inputs */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+ /* Unmute Front out path */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Headphone out path */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Mono out path */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ { }
+};
+#endif
+
+static const struct hda_verb alc260_hp_3013_init_verbs[] = {
+ /* Line out and output */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* mono output */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ /* Line In pin widget for input */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* Headphone pin widget for output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ /* CD pin widget for input */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ /* unmute amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+ /* set connection select to line in (default select for this ADC) */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* unmute Line-Out mixer amp left and right (volume = 0) */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* unmute HP mixer amp left and right (volume = 0) */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* mute pin widget amp left and right (no gain on this amp) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
+ /* mute analog inputs */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
+ /* Unmute Front out path */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Headphone out path */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ /* Unmute Mono out path */
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ { }
+};
+
+/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
+ * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
+ * audio = 0x16, internal speaker = 0x10.
+ */
+static const struct hda_verb alc260_fujitsu_init_verbs[] = {
+ /* Disable all GPIOs */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0},
+ /* Internal speaker is connected to headphone pin */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Headphone/Line-out jack connects to Line1 pin; make it an output */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Ensure all other unused pins are disabled and muted. */
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+ /* Disable digital (SPDIF) pins */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+ /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
+ * when acting as an output.
+ */
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Line1 pin widget output buffer since it starts as an output.
+ * If the pin mode is changed by the user the pin mode control will
+ * take care of enabling the pin's input/output buffers as needed.
+ * Therefore there's no need to enable the input buffer at this
+ * stage.
+ */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute input buffer of pin widget used for Line-in (no equiv
+ * mixer ctrl)
+ */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting - line
+ * in (on mic1 pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Do the same for the second ADC: mute capture input amp and
+ * set ADC connection to line in (on mic1 pin)
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+ { }
+};
+
+/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
+ * similar laptops (adapted from Fujitsu init verbs).
+ */
+static const struct hda_verb alc260_acer_init_verbs[] = {
+ /* On TravelMate laptops, GPIO 0 enables the internal speaker and
+ * the headphone jack. Turn this on and rely on the standard mute
+ * methods whenever the user wants to turn these outputs off.
+ */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+ /* Internal speaker/Headphone jack is connected to Line-out pin */
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Internal microphone/Mic jack is connected to Mic1 pin */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+ /* Line In jack is connected to Line1 pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Ensure all other unused pins are disabled and muted. */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Disable digital (SPDIF) pins */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+ /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+ * bus when acting as outputs.
+ */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* Unmute Line-out pin widget amp left and right
+ * (no equiv mixer ctrl)
+ */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute mono pin widget amp output (no equiv mixer ctrl) */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Mic1 and Line1 pin widget input buffers since they start as
+ * inputs. If the pin mode is changed by the user the pin mode control
+ * will take care of enabling the pin's input/output buffers as needed.
+ * Therefore there's no need to enable the input buffer at this
+ * stage.
+ */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting - mic
+ * (on mic1 pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Do similar with the second ADC: mute capture input amp and
+ * set ADC connection to mic to match ALSA's default state.
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+ { }
+};
+
+/* Initialisation sequence for Maxdata Favorit 100XS
+ * (adapted from Acer init verbs).
+ */
+static const struct hda_verb alc260_favorit100_init_verbs[] = {
+ /* GPIO 0 enables the output jack.
+ * Turn this on and rely on the standard mute
+ * methods whenever the user wants to turn these outputs off.
+ */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+ /* Line/Mic input jack is connected to Mic1 pin */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+ /* Ensure all other unused pins are disabled and muted. */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Disable digital (SPDIF) pins */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+ /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+ * bus when acting as outputs.
+ */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* Unmute Line-out pin widget amp left and right
+ * (no equiv mixer ctrl)
+ */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Mic1 and Line1 pin widget input buffers since they start as
+ * inputs. If the pin mode is changed by the user the pin mode control
+ * will take care of enabling the pin's input/output buffers as needed.
+ * Therefore there's no need to enable the input buffer at this
+ * stage.
+ */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting - mic
+ * (on mic1 pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Do similar with the second ADC: mute capture input amp and
+ * set ADC connection to mic to match ALSA's default state.
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+ { }
+};
+
+static const struct hda_verb alc260_will_verbs[] = {
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+ {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
+ {}
+};
+
+static const struct hda_verb alc260_replacer_672v_verbs[] = {
+ {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+ {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
+
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+
+ {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc260_replacer_672v_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
+ present = snd_hda_jack_detect(codec, 0x0f);
+ if (present) {
+ snd_hda_codec_write_cache(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DATA, 1);
+ snd_hda_codec_write_cache(codec, 0x0f, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ PIN_HP);
+ } else {
+ snd_hda_codec_write_cache(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DATA, 0);
+ snd_hda_codec_write_cache(codec, 0x0f, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ PIN_OUT);
+ }
+}
+
+static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC_HP_EVENT)
+ alc260_replacer_672v_automute(codec);
+}
+
+static const struct hda_verb alc260_hp_dc7600_verbs[] = {
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
+ {}
+};
+
+/* Test configuration for debugging, modelled after the ALC880 test
+ * configuration.
+ */
+#ifdef CONFIG_SND_DEBUG
+static const hda_nid_t alc260_test_dac_nids[1] = {
+ 0x02,
+};
+static const hda_nid_t alc260_test_adc_nids[2] = {
+ 0x04, 0x05,
+};
+/* For testing the ALC260, each input MUX needs its own definition since
+ * the signal assignments are different. This assumes that the first ADC
+ * is NID 0x04.
+ */
+static const struct hda_input_mux alc260_test_capture_sources[2] = {
+ {
+ .num_items = 7,
+ .items = {
+ { "MIC1 pin", 0x0 },
+ { "MIC2 pin", 0x1 },
+ { "LINE1 pin", 0x2 },
+ { "LINE2 pin", 0x3 },
+ { "CD pin", 0x4 },
+ { "LINE-OUT pin", 0x5 },
+ { "HP-OUT pin", 0x6 },
+ },
+ },
+ {
+ .num_items = 8,
+ .items = {
+ { "MIC1 pin", 0x0 },
+ { "MIC2 pin", 0x1 },
+ { "LINE1 pin", 0x2 },
+ { "LINE2 pin", 0x3 },
+ { "CD pin", 0x4 },
+ { "Mixer", 0x5 },
+ { "LINE-OUT pin", 0x6 },
+ { "HP-OUT pin", 0x7 },
+ },
+ },
+};
+static const struct snd_kcontrol_new alc260_test_mixer[] = {
+ /* Output driver widgets */
+ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
+
+ /* Modes for retasking pin widgets
+ * Note: the ALC260 doesn't seem to act on requests to enable mic
+ * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
+ * mention this restriction. At this stage it's not clear whether
+ * this behaviour is intentional or is a hardware bug in chip
+ * revisions available at least up until early 2006. Therefore for
+ * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
+ * choices, but if it turns out that the lack of mic bias for these
+ * NIDs is intentional we could change their modes from
+ * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ */
+ ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
+ ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
+
+ /* Loopback mixer controls */
+ HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
+ HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
+ HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
+
+ /* Controls for GPIO pins, assuming they are configured as outputs */
+ ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
+ ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
+
+ /* Switches to allow the digital IO pins to be enabled. The datasheet
+ * is ambigious as to which NID is which; testing on laptops which
+ * make this output available should provide clarification.
+ */
+ ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
+ ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
+
+ /* A switch allowing EAPD to be enabled. Some laptops seem to use
+ * this output to turn on an external amplifier.
+ */
+ ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
+ ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
+
+ { } /* end */
+};
+static const struct hda_verb alc260_test_init_verbs[] = {
+ /* Enable all GPIOs as outputs with an initial value of 0 */
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
+
+ /* Enable retasking pins as output, initially without power amp */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* Disable digital (SPDIF) pins initially, but users can enable
+ * them via a mixer switch. In the case of SPDIF-out, this initverb
+ * payload also sets the generation to 0, output to be in "consumer"
+ * PCM format, copyright asserted, no pre-emphasis and no validity
+ * control.
+ */
+ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+ /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
+ * OUT1 sum bus when acting as an output.
+ */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* Start with output sum widgets muted and their output gains at min */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* Unmute retasking pin widget output buffers since the default
+ * state appears to be output. As the pin mode is changed by the
+ * user the pin mode control will take care of enabling the pin's
+ * input/output buffers as needed.
+ */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Also unmute the mono-out pin widget */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Mute capture amp left and right */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* Set ADC connection select to match default mixer setting (mic1
+ * pin)
+ */
+ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Do the same for the second ADC: mute capture input amp and
+ * set ADC connection to mic1 pin
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Mute all inputs to mixer widget (even unconnected ones) */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+ { }
+};
+#endif
+
+/*
+ * ALC260 configurations
+ */
+static const char * const alc260_models[ALC260_MODEL_LAST] = {
+ [ALC260_BASIC] = "basic",
+ [ALC260_HP] = "hp",
+ [ALC260_HP_3013] = "hp-3013",
+ [ALC260_HP_DC7600] = "hp-dc7600",
+ [ALC260_FUJITSU_S702X] = "fujitsu",
+ [ALC260_ACER] = "acer",
+ [ALC260_WILL] = "will",
+ [ALC260_REPLACER_672V] = "replacer",
+ [ALC260_FAVORIT100] = "favorit100",
+#ifdef CONFIG_SND_DEBUG
+ [ALC260_TEST] = "test",
+#endif
+ [ALC260_AUTO] = "auto",
+};
+
+static const struct snd_pci_quirk alc260_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
+ SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
+ SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
+ SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
+ SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */
+ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600),
+ SND_PCI_QUIRK(0x103c, 0x3013, "HP", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x3014, "HP", ALC260_HP),
+ SND_PCI_QUIRK(0x103c, 0x3015, "HP", ALC260_HP),
+ SND_PCI_QUIRK(0x103c, 0x3016, "HP", ALC260_HP),
+ SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
+ SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
+ SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
+ SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
+ SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
+ SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
+ SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
+ {}
+};
+
+static const struct alc_config_preset alc260_presets[] = {
+ [ALC260_BASIC] = {
+ .mixers = { alc260_base_output_mixer,
+ alc260_input_mixer },
+ .init_verbs = { alc260_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_HP] = {
+ .mixers = { alc260_hp_output_mixer,
+ alc260_input_mixer },
+ .init_verbs = { alc260_init_verbs,
+ alc260_hp_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc260_hp_setup,
+ .init_hook = alc_inithook,
+ },
+ [ALC260_HP_DC7600] = {
+ .mixers = { alc260_hp_dc7600_mixer,
+ alc260_input_mixer },
+ .init_verbs = { alc260_init_verbs,
+ alc260_hp_dc7600_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc260_hp_3012_setup,
+ .init_hook = alc_inithook,
+ },
+ [ALC260_HP_3013] = {
+ .mixers = { alc260_hp_3013_mixer,
+ alc260_input_mixer },
+ .init_verbs = { alc260_hp_3013_init_verbs,
+ alc260_hp_3013_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc260_hp_3013_setup,
+ .init_hook = alc_inithook,
+ },
+ [ALC260_FUJITSU_S702X] = {
+ .mixers = { alc260_fujitsu_mixer },
+ .init_verbs = { alc260_fujitsu_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
+ .input_mux = alc260_fujitsu_capture_sources,
+ },
+ [ALC260_ACER] = {
+ .mixers = { alc260_acer_mixer },
+ .init_verbs = { alc260_acer_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
+ .input_mux = alc260_acer_capture_sources,
+ },
+ [ALC260_FAVORIT100] = {
+ .mixers = { alc260_favorit100_mixer },
+ .init_verbs = { alc260_favorit100_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+ .adc_nids = alc260_dual_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
+ .input_mux = alc260_favorit100_capture_sources,
+ },
+ [ALC260_WILL] = {
+ .mixers = { alc260_will_mixer },
+ .init_verbs = { alc260_init_verbs, alc260_will_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .adc_nids = alc260_adc_nids,
+ .dig_out_nid = ALC260_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_REPLACER_672V] = {
+ .mixers = { alc260_replacer_672v_mixer },
+ .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .adc_nids = alc260_adc_nids,
+ .dig_out_nid = ALC260_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ .unsol_event = alc260_replacer_672v_unsol_event,
+ .init_hook = alc260_replacer_672v_automute,
+ },
+#ifdef CONFIG_SND_DEBUG
+ [ALC260_TEST] = {
+ .mixers = { alc260_test_mixer },
+ .init_verbs = { alc260_test_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
+ .dac_nids = alc260_test_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
+ .adc_nids = alc260_test_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
+ .input_mux = alc260_test_capture_sources,
+ },
+#endif
+};
+