summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8962.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8962.c')
-rw-r--r--sound/soc/codecs/wm8962.c85
1 files changed, 85 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index eb66c66047b1..3a1db4a76a64 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <sound/core.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -63,6 +64,9 @@ struct wm8962_priv {
int fll_fref;
int fll_fout;
+ struct delayed_work mic_work;
+ struct snd_soc_jack *jack;
+
struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8962_NUM_SUPPLIES];
@@ -1462,9 +1466,40 @@ static struct snd_soc_dai_driver wm8962_dai = {
.symmetric_rates = 1,
};
+static void wm8962_mic_work(struct work_struct *work)
+{
+ struct wm8962_priv *wm8962 = container_of(work,
+ struct wm8962_priv,
+ mic_work.work);
+ struct snd_soc_codec *codec = wm8962->codec;
+ int status = 0;
+ int irq_pol = 0;
+ int reg;
+
+ reg = snd_soc_read(codec, WM8962_ADDITIONAL_CONTROL_4);
+
+ if (reg & WM8962_MICDET_STS) {
+ status |= SND_JACK_MICROPHONE;
+ irq_pol |= WM8962_MICD_IRQ_POL;
+ }
+
+ if (reg & WM8962_MICSHORT_STS) {
+ status |= SND_JACK_BTN_0;
+ irq_pol |= WM8962_MICSCD_IRQ_POL;
+ }
+
+ snd_soc_jack_report(wm8962->jack, status,
+ SND_JACK_MICROPHONE | SND_JACK_BTN_0);
+
+ snd_soc_update_bits(codec, WM8962_MICINT_SOURCE_POL,
+ WM8962_MICSCD_IRQ_POL |
+ WM8962_MICD_IRQ_POL, irq_pol);
+}
+
static irqreturn_t wm8962_irq(int irq, void *data)
{
struct snd_soc_codec *codec = data;
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int mask;
int active;
@@ -1479,12 +1514,59 @@ static irqreturn_t wm8962_irq(int irq, void *data)
if (active & WM8962_TEMP_SHUT_EINT)
dev_crit(codec->dev, "Thermal shutdown\n");
+ if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) {
+ dev_dbg(codec->dev, "Microphone event detected\n");
+
+ schedule_delayed_work(&wm8962->mic_work,
+ msecs_to_jiffies(250));
+ }
+
/* Acknowledge the interrupts */
snd_soc_write(codec, WM8962_INTERRUPT_STATUS_2, active);
return IRQ_HANDLED;
}
+/**
+ * wm8962_mic_detect - Enable microphone detection via the WM8962 IRQ
+ *
+ * @codec: WM8962 codec
+ * @jack: jack to report detection events on
+ *
+ * Enable microphone detection via IRQ on the WM8962. If GPIOs are
+ * being used to bring out signals to the processor then only platform
+ * data configuration is needed for WM8962 and processor GPIOs should
+ * be configured using snd_soc_jack_add_gpios() instead.
+ *
+ * If no jack is supplied detection will be disabled.
+ */
+int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
+{
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ int irq_mask, enable;
+
+ wm8962->jack = jack;
+ if (jack) {
+ irq_mask = 0;
+ enable = WM8962_MICDET_ENA;
+ } else {
+ irq_mask = WM8962_MICD_EINT | WM8962_MICSCD_EINT;
+ enable = 0;
+ }
+
+ snd_soc_update_bits(codec, WM8962_INTERRUPT_STATUS_2_MASK,
+ WM8962_MICD_EINT | WM8962_MICSCD_EINT, irq_mask);
+ snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
+ WM8962_MICDET_ENA, enable);
+
+ /* Send an initial empty report */
+ snd_soc_jack_report(wm8962->jack, 0,
+ SND_JACK_MICROPHONE | SND_JACK_BTN_0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm8962_mic_detect);
+
#ifdef CONFIG_PM
static int wm8962_resume(struct snd_soc_codec *codec)
{
@@ -1773,6 +1855,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
int i, trigger, irq_pol;
wm8962->codec = codec;
+ INIT_DELAYED_WORK(&wm8962->mic_work, wm8962_mic_work);
codec->cache_sync = 1;
codec->idle_bias_off = 1;
@@ -1946,6 +2029,8 @@ static int wm8962_remove(struct snd_soc_codec *codec)
if (i2c->irq)
free_irq(i2c->irq, codec);
+ cancel_delayed_work_sync(&wm8962->mic_work);
+
wm8962_free_gpio(codec);
wm8962_free_beep(codec);
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)