summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-11apalis_tk1: Support for K20 based MFDApalis_TK1_LinuxImageV2.7Beta1_20170112Dominik Sliwa
On Apalis TK1 boards K20 MCU is used for CAN, GPIO, ADC and touch screen. This patch includes support for core MFD device, GPIO, ADC and touch screen. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11apalis-tk1: support i2c rtcMarcel Ziswiler
Integrate support for the carrier board level I2C RTC. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21mmc: tegra: apalis-tk1: no longer do card detect polling on v1.1 hwApalis_TK1_LinuxImageV2.6.1Beta2_20161122Marcel Ziswiler
Now with the working card detect pin in place on the latest V1.1 HW polling is no longer required. Therefore make it an optional define for V1.0 samples. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: working sd card detect on v1.1 hwMarcel Ziswiler
Add sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: adjust pin muxing for v1.1 hwMarcel Ziswiler
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function without any pull-up/down. Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW. Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka not tristated and input driver enabled as well as it features some magic properties even though the external loopback is disabled and the internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is now a not-connect on V1.1 HW in order to avoid any interference. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: temp alert pull-upMarcel Ziswiler
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#. While at it improve some comments. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21sdhci: tegra: add 200 mhz tuning dataMarcel Ziswiler
As we limit the clock to 200 MHz also add tap hole coefficients to allow for successful UHC-I tuning on SDMMC1. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21pinctrl: tegra: fix some mistakes in Tegra124Stephen Warren
A couple of pairs of pin group names were swapped in the table. This caused the wrong register to be programmed. Luckily, this had little effect, if any, since the swapped pins were likely to be programmed identically. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> (cherry picked from commit 0ffdd4b61b1326b2b8a7c4fdf3c061d807be1a74)
2016-11-21apalis-tk1: fix pcie clock and reset not conforming to specificationMarcel Ziswiler
Fix PCIe clock and reset not conforming to specification by moving PCIe reset handling including the PLX PEX 8605 errata 5 workaround from the board platform data into the right places timing wise in the PCIe driver itself. Also add a kernel command line argument to allow using the Apalis GPIO7 as a regular GPIO rather than for above mentioned PLX PEX 8605 workaround: pex_perst=0 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com> (cherry picked from tegra-next commit a2f63805703b43d55d91ae17f10d0049bf0f625e)
2016-11-21apalis-tk1: configure IPv6 SIT driver as moduleStefan Agner
SIT tunnels (IPv6 over IPv4) are not often used hence configure the driver as a module. This also gets rid of the extra network interface sit0 by default. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-21Revert "media: tegra_camera: introduce 2 kthreads for capture"Marcel Ziswiler
This reverts commit ff5bccb61c1f8da1f63451fda88bd1f65dbee5b2. This makes Antmicro's OV5640 camera module work again as described on their blog here: http://antmicro.com/Blog/2015/09/jetson-tk1-cameras/ Further investigation pending. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: integrate adv7280-m, ap1302, ov5640 and tc358743 supportMarcel Ziswiler
Integrate SoC camera support for the following CSI-2 codecs/sensors: - Analog Devices ADV7280-M, analog camera decoder with deinterlacer, PAL/NTSC@60fps - ON Semiconductor (formerly Aptina) AP1302 ISP + AR1820 image sensor, 13Mpx, 1080p@30fps - OmniVision OV5640, 5Mpx sensor, 1080p@30fps - Toshiba TC358743 HDMI to CSI-2 bridge, 1080p@60fps Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21media: support for second single-lane decoder (ADV7280M)Wojciech Bieganski
Connected to CSI CIL-E. Cameras doesn't work simultaneously. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21media: tc358743: update hdmi to csi-2 driverTomasz Gorochowik
A major part of the driver has been rewritten in order to avoid writing binary blobs to the chip. This version also adds support for more video modes. Input video modes supported: - 1920x1080 @ 60 - 1280x1024 @ 75 - 1280x720 @ 60 - 1024x768 @ 75 - 800x600 @ 75 - 640x480 @ 75 Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21ADV7280M video decoder with deinterlacer supportWojciech Bieganski
known issues: - decoder outputs PAL (720x576), but the image looks fine only when streamed in 640x576 mode, - vertical synchronisation glitches, - setting queue-size in gstreamer greater than 1 results in blinking image, - every start of streaming requires reloading of the modules Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21TC358743 HDMI to CSI-2 bridge supportWojciech Bieganski
known issues: - HDMI input works only in 640x480 mode, 720p only in test pattern mode, any 4-lane mode doesn't work - set HDMI transmitter to VGA mode before starting the stream Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21OV5640 camera supportWojciech Bieganski
known issues: - works only in 1080p mode, - vertical synchronisation glitches, - setting queue-size in gstreamer greater than 1 results in blinking image - every start of streaming requires reloading of the modules Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21AP1302 from ON Semiconductor support addedMarcel Ziswiler
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21YUV sensors support added to tegra_camera driverWojciech Bieganski
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: re-add soc camera platform dataMarcel Ziswiler
Re-add SoC camera platform data from Ardbeg/Jetson TK1 board files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: integrate optional edp supportMarcel Ziswiler
Integrate optional eDP support (e.g. uncomment define of APALIS_TK1_EDP as found in the platform data header file. Tested using a prototype Apalis TK1 mezzanine connecting to a Samsung LTN156FL02-L01 panel featuring a 4K aka UHD resolution of 3840 by 2160. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up board platform data header fileMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up board platform dataMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up defconfigMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: select dp pinmux function for dp_hpdMarcel Ziswiler
Select dp pinmux function for Apalis GPIO2 aka DP_HPD to allow it to be used as eDP hot-plug detect. From user space customer may still configure and use it as a regular GPIO if desired. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: remove gpio functionality from dp_hpd and gpio_pff2 pinsMarcel Ziswiler
Remove default GPIO functionality from Apalis GPIO1 aka GPIO_PFF2 and Apalis GPIO2 aka DP_HPD as if later trying to use resp. pins as special function (e.g. the former for eDP hot-plug detect and the later for SATA data activity) there is currently no sane way of removing the GPIO functionality again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: add comment concerning ssp1 on usb2p0 functionality being tbdMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis_tk1: Enable UART4Dominik Sliwa
Uncomment UART4 device tree node and enable support in machfile Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-21apalis-tk1: fix cl-dvfs and soctherm to unlock full performanceMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-09-29video: tegra: dc: fix gcc-6 compilationApalis_TK1_LinuxImageV2.6.1Beta1_20160929Marcel Ziswiler
drivers/video/tegra/dc/dc.c:116:3: error: 'can_filter' defined but not used [-Werror=unused-const-variable=] } can_filter[] = { ^~~~~~~~~~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29media: platform: tegra: fix gcc-6 compilationMarcel Ziswiler
drivers/media/platform/tegra/ad5816.c: In function 'ad5816_param_wr': drivers/media/platform/tegra/ad5816.c:682:6: error: this 'if' clause does not guard... [-Werror=misleading-indentation] if (info->s_mode != NVC_SYNC_STEREO) ^~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29media: tegra: fix gcc-6 compilationMarcel Ziswiler
drivers/media/platform/tegra/dw9718.c:627:6: error: this 'if' clause does not guard... [-Werror=misleading-indentation] if (info->s_mode != NVC_SYNC_STEREO) ^~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29video: tegra: host: gk20a: fix gcc-6 compilationMarcel Ziswiler
drivers/gpu/nvgpu/gk20a/mm_gk20a.c:124:18: error: 'gmmu_page_masks' defined but not used [-Werror=unused-const-variable=] static const u64 gmmu_page_masks[gmmu_nr_page_sizes] = { ~0xfffLL, ~0x1ffffLL }; ^~~~~~~~~~~~~~~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29gpu: nvgpu: fix gcc-6 compilationMarcel Ziswiler
drivers/gpu/nvgpu/gk20a/regops_gk20a.c:344:40: error: 'gk20a_runcontrol_whitelist_ranges' defined but not used [-Werror=unused-const-variable=] static const struct regop_offset_range gk20a_runcontrol_whitelist_ranges[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/nvgpu/gk20a/regops_gk20a.c:350:18: error: 'gk20a_runcontrol_whitelist_ranges_count' defined but not used [-Werror=unused-const-variable=] static const u32 gk20a_runcontrol_whitelist_ranges_count = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/nvgpu/gk20a/regops_gk20a.c:366:40: error: 'gk20a_qctl_whitelist_ranges' defined but not used [-Werror=unused-const-variable=] static const struct regop_offset_range gk20a_qctl_whitelist_ranges[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/nvgpu/gk20a/regops_gk20a.c:373:18: error: 'gk20a_qctl_whitelist_ranges_count' defined but not used [-Werror=unused-const-variable=] static const u32 gk20a_qctl_whitelist_ranges_count = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29arm: tegra: ardbeg: fix gcc-6 compilationMarcel Ziswiler
arch/arm/mach-tegra/board-ardbeg.c: In function 'ardbeg_touch_init': arch/arm/mach-tegra/board-ardbeg.c:1159:6: error: this 'else' clause does not guard... [-Werror=misleading-indentation] } else ^~~~ arch/arm/mach-tegra/board-ardbeg.c:1161:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'else' rm31080a_ardbeg_spi_board[0].irq = ^~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/board-ardbeg.c: In function 'tegra_ardbeg_late_init': arch/arm/mach-tegra/board-ardbeg.c:1470:2: error: this 'else' clause does not guard... [-Werror=misleading-indentation] else ^~~~ arch/arm/mach-tegra/board-ardbeg.c:1474:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'else' tegra_io_dpd_enable(&pexbias_io); ^~~~~~~~~~~~~~~~~~~ At top level: arch/arm/mach-tegra/board-ardbeg.c:1608:27: error: 'loki_dt_board_compat' defined but not used [-Werror=unused-const-variable=] static const char * const loki_dt_board_compat[] = { ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29compiler-gcc: disable -ftracer for __noclone functionsPaolo Bonzini
commit 95272c29378ee7dc15f43fa2758cb28a5913a06d upstream. -ftracer can duplicate asm blocks causing compilation to fail in noclone functions. For example, KVM declares a global variable in an asm like asm("2: ... \n .pushsection data \n .global vmx_return \n vmx_return: .long 2b"); and -ftracer causes a double declaration. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: stable@vger.kernel.org Cc: kvm@vger.kernel.org Reported-by: Linda Walsh <lkml@tlinx.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu> (cherry picked from commit 5d814ad8d35e5e23e0c27fb0f0b80c1044ecefad)
2016-09-29compiler-gcc: integrate the various compiler-gcc[345].h filesJoe Perches
commit cb984d101b30eb7478d32df56a0023e4603cba7f upstream. As gcc major version numbers are going to advance rather rapidly in the future, there's no real value in separate files for each compiler version. Deduplicate some of the macros #defined in each file too. Neaten comments using normal kernel commenting style. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Alan Modra <amodra@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ philm: backport to 3.10-stable ] Signed-off-by: Philip Müller <philm@manjaro.org> Signed-off-by: Willy Tarreau <w@1wt.eu> (cherry picked from commit a4a4f1cd733fe5b345db4e8cc19bb8868d562a8a)
2016-09-29fbcon: logo: allow easy integration of a custom Linux boot logoMarcel Ziswiler
This patch allows for easy integration of a custom Linux boot logo to replace the Tux' being shown by default. Use gimp or the like to create a raw PPM in your desired resolution. Reduce the number of colours in the image to 224: user@host:~$ ppmquant 224 Toradex-640x480.ppm > \ Toradex-640x480-224.ppm ppmquant: making histogram... ppmquant: 370 colors found ppmquant: choosing 224 colors... ppmquant: mapping image to new colors... Convert it from raw PPM to ASCII format: user@host:~$ pnmnoraw Toradex-640x480-224.ppm > \ Toradex-640x480-ascii-224.ppm Copy it into the Linux sources: cp Toradex-640x480-ascii-224.ppm linux-toradex/drivers/video/logo/\ logo_custom_clut224.ppm Activate exclusively custom Linux logo in the kernel configuration: Device Drivers -> Graphics support -> Bootup logo -> Custom 224-color Linux logo And re-compile the kernel. (cherry picked from commit fa2371bff9ac03581881849d8f95678ef3992719)
2016-09-29apalis_tk1: Optimized RAM settingDominik Sliwa
Optimized DVFS table for Apalis TK1 boards. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-29spi-tegra114: Warning when clock rate switch failsDominik Sliwa
When setting transfer clock rate out of bounds old clock rate was used without any notice. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-06-29arm: tegra: initial support for apalis tk1Apalis_TK1_LinuxImageV2.6Beta2_20160701Marcel Ziswiler
This patch adds support for the Toradex Apalis TK1 acomputer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality which is not yet supported. This is known to boot into either a basic Angstrom/OpenEmbedded/Yocto or L4T/JetPack Ubuntu based image. The following things are known to work to a certain extend: - analogue/digital audio - debug UART1 - DVFS power management incl. low power core migration - eMMC - gigabit Ethernet - GPIOs - HDMI (incl. HDA audio) - I2C - LVDS - PCIe - SATA - SD/MMC cards - temperature sensor - USB host ports The rest is untested. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29apalis-tk1: fix backlight pwm and add 800x600 and 1024x600 lvds timingsMarcel Ziswiler
Fix the backlight PWM instance used and add 800x600 and 1024x600 LVDS panel timings. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29video: tegra: correct lvds clk sequenceMarcel Ziswiler
Patch taken from Manoj Gupta's post on NVIDIA's public embedded systems forum: https://devtalk.nvidia.com/default/topic/822612/jetson-tk1/-issue-lvds-panel-enabled-effect-hdmi-out-image-pull-down-menu-items/post/4673174/#4673174 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29video: tegra: fix build with enabled tegra lvds driverMarcel Ziswiler
This fixes the following build time error in case CONFIG_TEGRA_LVDS is enabled: drivers/video/tegra/dc/sor.h: In function 'tegra_sor_clk_enable': drivers/video/tegra/dc/sor.h:180:2: error: implicit declaration of function 'clk_prepare_enable' [-Werror=implicit-function-declaration] clk_prepare_enable(sor->sor_clk); ^ drivers/video/tegra/dc/sor.h: In function 'tegra_sor_clk_disable': drivers/video/tegra/dc/sor.h:185:2: error: implicit declaration of function 'clk_disable_unprepare' [-Werror=implicit-function-declaration] clk_disable_unprepare(sor->sor_clk); ^ In file included from drivers/video/tegra/dc/dc_priv_defs.h:26:0, from drivers/video/tegra/dc/dc_priv.h:23, from drivers/video/tegra/dc/lvds.c:23: include/linux/clk.h: At top level: include/linux/clk.h:330:19: error: static declaration of 'clk_prepare_enable' follows non-static declaration static inline int clk_prepare_enable(struct clk *clk) ^ In file included from drivers/video/tegra/dc/lvds.h:20:0, from drivers/video/tegra/dc/lvds.c:22: drivers/video/tegra/dc/sor.h:180:2: note: previous implicit declaration of 'clk_prepare_enable' was here clk_prepare_enable(sor->sor_clk); ^ In file included from drivers/video/tegra/dc/dc_priv_defs.h:26:0, from drivers/video/tegra/dc/dc_priv.h:23, from drivers/video/tegra/dc/lvds.c:23: include/linux/clk.h:345:20: error: conflicting types for 'clk_disable_unprepare' [-Werror] static inline void clk_disable_unprepare(struct clk *clk) ^ include/linux/clk.h:345:20: error: static declaration of 'clk_disable_unprepare' follows non-static declaration In file included from drivers/video/tegra/dc/lvds.h:20:0, from drivers/video/tegra/dc/lvds.c:22: drivers/video/tegra/dc/sor.h:185:2: note: previous implicit declaration of 'clk_disable_unprepare' was here clk_disable_unprepare(sor->sor_clk); ^ Final patch taken from Manoj Gupta's post on NVIDIA's public embedded systems forum: https://devtalk.nvidia.com/default/topic/822612/jetson-tk1/-issue-lvds-panel-enabled-effect-hdmi-out-image-pull-down-menu-items/post/4663817/#4663817 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29apalis-tk1: make hda 2nd sound card hackMarcel Ziswiler
Hack HDA driver to make it the 2nd rather than the first sound card as the first one should be the SGTL5000 which is always present on our T30 and TK1 modules. Especially on Ixora where there is no HDA codec on the carrier board HDA being the first sound card does not make much sense even more though as there was no primary device (e.g. device=hw:0,0). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com> (cherry picked from commit fff75b252e0aed1d8be2b62234624f726c153776)
2016-06-29apalis-tk1: integrate sgtl5000 audio codecMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29mmc: tegra: apalis-tk1: hack to make sd1 functionalMarcel Ziswiler
Disable the external loopback and use the internal loopback as per SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM. Enable card detect polling as we can't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it features some magic properties even though the external loopback is disabled and the internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-29apalis_t30/tk1: igb: no nvm and Ethernet MAC address handlingMarcel Ziswiler
Springville/i211 with a blank Flash/iNVM use different PCI IDs. Extend the driver to load despite i210/i211 data sheets claiming tools only, not for driver. Only warn rather than fail on NVM validation failures on Apalis T30. Revise Ethernet MAC address assignment: should now handle up to two instances of custom user MACs (2nd one with a 0x100000 offset). This way customer does not have to worry about NVM on a secondary Ethernet on the carrier board and still gets a valid official MAC address from us (e.g. analogous to how we did it on our Protea carrier board). Use the Toradex OUI as default MAC address if no valid one is encountered. Tested on samples of Apalis T30 2GB V1.0B, V1.0C, V1.1A, Apalis T30 1GB V1.0A, V1.1A and Apalis T30 1GB IT V1.1A both with blank NVMs as well as iNVMs programmed with Intel's defaults. Tested on samples of Apalis TK1 2GB V1.0A and V1.0B both with blank NVMs as well as iNVMs programmed with Intel's defaults. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com> (cherry picked from commit c4c3c7449bdb15c53bfebb0a29c73b24ea810d23)
2016-06-29igb: integrate tools only device supportMarcel Ziswiler
Springville/i211 with a blank Flash/iNVM use a different PCI ID (tools only, not for driver) than properly programmed ones. While at it also fix ethtool time stamping as well as RX flow hash indirection functionality. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com> (cherry picked from commit 2c7123458270c9b3ec9b5ed668f9d55a7f8dbad9)
2016-06-29igb: integrate igb driver 5.3.5.3Marcel Ziswiler
Integrate latest igb driver version 5.3.5.3 (igb-5.3.5.3.tar.gz from e1000.sf.net). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 08:24:02 +0000