summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-09Linux 3.18.18v3.18.18Sasha Levin
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05mmc: sdhci-pxav3: do the mbus window configuration after enabling clocksThomas Petazzoni
[ upstream commit aa8165f914420f143476305a01894b017d3abe6b ] In commit 5491ce3f79ee ("mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller"), the sdhci-pxav3 driver was extended to include support for the SDHCI controller found in the Armada 38x processor. This mainly involved adding some MBus window related configuration. However, this configuration is currently done too early in ->probe(): it is done before clocks are enabled, while this configuration involves touching the registers of the controller, which will hang the SoC if the clock is disabled. It wasn't noticed until now because the bootloader typically leaves gatable clocks enabled, but in situations where we have a deferred probe (due to a CD GPIO that cannot be taken, for example), then the probe will be re-tried later, after a clock disable has been done in the exit path of the failed probe attempt of the device. This second probe() will hang the system due to the clock being disabled. This can for example be produced on Armada 385 GP, which has a CD GPIO connected to an I2C PCA9555. If the driver for the PCA9555 is not compiled into the kernel, then we will have the following sequence of events: 1. The SDHCI probes 2. It does the MBus configuration (which works, because the clock is left enabled by the bootloader) 3. It enables the clock 4. It tries to get the CD GPIO, which fails due to the driver being missing, so -EPROBE_DEFER is returned. 5. Before returning -EPROBE_DEFER, the driver cleans up what was done, which includes disabling the clock. 6. Later on, the SDHCI probe is tried again. 7. It does the MBus configuration, which hangs because the clock is no longer enabled. This commit does the obvious fix of doing the MBus configuration after the clock has been enabled by the driver. Fixes: 5491ce3f79ee ("mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [jogo: rebased onto 3.18.17] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05sctp: Fix race between OOTB responce and route removalAlexander Sverdlin
[ Upstream commit 29c4afc4e98f4dc0ea9df22c631841f9c220b944 ] There is NULL pointer dereference possible during statistics update if the route used for OOTB responce is removed at unfortunate time. If the route exists when we receive OOTB packet and we finally jump into sctp_packet_transmit() to send ABORT, but in the meantime route is removed under our feet, we take "no_route" path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...). But sctp_ootb_pkt_new() used to prepare responce packet doesn't call sctp_transport_set_owner() and therefore there is no asoc associated with this packet. Probably temporary asoc just for OOTB responces is overkill, so just introduce a check like in all other places in sctp_packet_transmit(), where "asoc" is dereferenced. To reproduce this, one needs to 0. ensure that sctp module is loaded (otherwise ABORT is not generated) 1. remove default route on the machine 2. while true; do ip route del [interface-specific route] ip route add [interface-specific route] done 3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT responce On x86_64 the crash looks like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.0.5-1-ARCH #1 Hardware name: ... task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000 RIP: 0010:[<ffffffffa05ec9ac>] [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP: 0018:ffff880127c037b8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480 RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700 RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28 R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0 FS: 0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0 Stack: ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520 0000000000000000 0000000000000001 0000000000000000 0000000000000000 Call Trace: <IRQ> [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp] [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp] [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp] [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210 [<ffffffff810e0329>] ? update_process_times+0x59/0x60 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0 [<ffffffff8101f599>] ? read_tsc+0x9/0x10 [<ffffffff8116d4b5>] ? put_page+0x55/0x60 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic] [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp] [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp] [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp] [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp] [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp] [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169] [<ffffffff8147896a>] net_rx_action+0x21a/0x360 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0 [<ffffffff8107912d>] irq_exit+0xad/0xb0 [<ffffffff8157d158>] do_IRQ+0x58/0xf0 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp] [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480 [<ffffffff8156b365>] rest_init+0x85/0x90 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184 Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9 RIP [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP <ffff880127c037b8> CR2: 0000000000000020 ---[ end trace 5aec7fd2dc983574 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) drm_kms_helper: panic occurred, switching back to text console ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05bnx2x: fix lockdep splatEric Dumazet
[ Upstream commit d53c66a5b80698620f7c9ba2372fff4017e987b8 ] Michel reported following lockdep splat [ 44.718117] INFO: trying to register non-static key. [ 44.723081] the code is fine but needs lockdep annotation. [ 44.728559] turning off the locking correctness validator. [ 44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0 [ 44.770289] Call Trace: [ 44.772741] [<ffffffff816eb1cd>] dump_stack+0x4c/0x65 [ 44.777879] [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510 [ 44.783708] [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10 [ 44.789538] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.795276] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.801967] [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10 [ 44.807793] [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250 [ 44.814142] [<ffffffff81112ba6>] lock_acquire+0xb6/0x290 [ 44.819537] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.824844] [<ffffffff810d66ad>] flush_work+0x3d/0x280 [ 44.830061] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.835366] [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20 [ 44.841889] [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50 [ 44.847365] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.853102] [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0 [ 44.859359] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.866045] [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0 [ 44.872048] [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x] [ 44.878481] [<ffffffff810d8670>] cancel_work_sync+0x10/0x20 [ 44.884134] [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x] [ 44.890829] [<ffffffff8110ce02>] ? up+0x32/0x50 [ 44.895439] [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0 [ 44.901005] [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x] [ 44.907527] [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0 [ 44.912921] [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x] [ 44.919879] [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x] [ 44.926664] [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40 [ 44.932148] [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20 [ 44.937364] [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630 [ 44.942582] [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70 [ 44.947972] [<ffffffff815ac013>] sock_ioctl+0x73/0x280 [ 44.953192] [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0 [ 44.958587] [<ffffffff8110d0b3>] ? up_read+0x23/0x40 [ 44.963631] [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0 [ 44.969105] [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0 [ 44.974149] [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync() Fixes: eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michal Kalderon <Michal.Kalderon@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: David Decotigny <decot@google.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05net: phy: fix phy link up when limiting speed via device treeMugunthan V N
[ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ] When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05net/mlx4_en: Wake TX queues only when there's enough roomIdo Shamay
[ Upstream commit 488a9b48e398b157703766e2cd91ea45ac6997c5 ] Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout. Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again. Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05tcp: Do not call tcp_fastopen_reset_cipher from interrupt contextChristoph Paasch
[ Upstream commit dfea2aa654243f70dc53b8648d0bbdeec55a7df1 ] tcp_fastopen_reset_cipher really cannot be called from interrupt context. It allocates the tcp_fastopen_context with GFP_KERNEL and calls crypto_alloc_cipher, which allocates all kind of stuff with GFP_KERNEL. Thus, we might sleep when the key-generation is triggered by an incoming TFO cookie-request which would then happen in interrupt- context, as shown by enabling CONFIG_DEBUG_ATOMIC_SLEEP: [ 36.001813] BUG: sleeping function called from invalid context at mm/slub.c:1266 [ 36.003624] in_atomic(): 1, irqs_disabled(): 0, pid: 1016, name: packetdrill [ 36.004859] CPU: 1 PID: 1016 Comm: packetdrill Not tainted 4.1.0-rc7 #14 [ 36.006085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 36.008250] 00000000000004f2 ffff88007f8838a8 ffffffff8171d53a ffff880075a084a8 [ 36.009630] ffff880075a08000 ffff88007f8838c8 ffffffff810967d3 ffff88007f883928 [ 36.011076] 0000000000000000 ffff88007f8838f8 ffffffff81096892 ffff88007f89be00 [ 36.012494] Call Trace: [ 36.012953] <IRQ> [<ffffffff8171d53a>] dump_stack+0x4f/0x6d [ 36.014085] [<ffffffff810967d3>] ___might_sleep+0x103/0x170 [ 36.015117] [<ffffffff81096892>] __might_sleep+0x52/0x90 [ 36.016117] [<ffffffff8118e887>] kmem_cache_alloc_trace+0x47/0x190 [ 36.017266] [<ffffffff81680d82>] ? tcp_fastopen_reset_cipher+0x42/0x130 [ 36.018485] [<ffffffff81680d82>] tcp_fastopen_reset_cipher+0x42/0x130 [ 36.019679] [<ffffffff81680f01>] tcp_fastopen_init_key_once+0x61/0x70 [ 36.020884] [<ffffffff81680f2c>] __tcp_fastopen_cookie_gen+0x1c/0x60 [ 36.022058] [<ffffffff816814ff>] tcp_try_fastopen+0x58f/0x730 [ 36.023118] [<ffffffff81671788>] tcp_conn_request+0x3e8/0x7b0 [ 36.024185] [<ffffffff810e3872>] ? __module_text_address+0x12/0x60 [ 36.025327] [<ffffffff8167b2e1>] tcp_v4_conn_request+0x51/0x60 [ 36.026410] [<ffffffff816727e0>] tcp_rcv_state_process+0x190/0xda0 [ 36.027556] [<ffffffff81661f97>] ? __inet_lookup_established+0x47/0x170 [ 36.028784] [<ffffffff8167c2ad>] tcp_v4_do_rcv+0x16d/0x3d0 [ 36.029832] [<ffffffff812e6806>] ? security_sock_rcv_skb+0x16/0x20 [ 36.030936] [<ffffffff8167cc8a>] tcp_v4_rcv+0x77a/0x7b0 [ 36.031875] [<ffffffff816af8c3>] ? iptable_filter_hook+0x33/0x70 [ 36.032953] [<ffffffff81657d22>] ip_local_deliver_finish+0x92/0x1f0 [ 36.034065] [<ffffffff81657f1a>] ip_local_deliver+0x9a/0xb0 [ 36.035069] [<ffffffff81657c90>] ? ip_rcv+0x3d0/0x3d0 [ 36.035963] [<ffffffff81657569>] ip_rcv_finish+0x119/0x330 [ 36.036950] [<ffffffff81657ba7>] ip_rcv+0x2e7/0x3d0 [ 36.037847] [<ffffffff81610652>] __netif_receive_skb_core+0x552/0x930 [ 36.038994] [<ffffffff81610a57>] __netif_receive_skb+0x27/0x70 [ 36.040033] [<ffffffff81610b72>] process_backlog+0xd2/0x1f0 [ 36.041025] [<ffffffff81611482>] net_rx_action+0x122/0x310 [ 36.042007] [<ffffffff81076743>] __do_softirq+0x103/0x2f0 [ 36.042978] [<ffffffff81723e3c>] do_softirq_own_stack+0x1c/0x30 This patch moves the call to tcp_fastopen_init_key_once to the places where a listener socket creates its TFO-state, which always happens in user-context (either from the setsockopt, or implicitly during the listen()-call) Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 222e83d2e0ae ("tcp: switch tcp_fastopen key generation to net_get_random_once") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05neigh: do not modify unlinked entriesJulian Anastasov
[ Upstream commit 2c51a97f76d20ebf1f50fef908b986cb051fdff9 ] The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Fixes: a263b3093641 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05packet: avoid out of bounds read in round robin fanoutWillem de Bruijn
[ Upstream commit 468479e6043c84f5a65299cc07cb08a22a28c2b1 ] PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600698d ("packet: Add fanout support.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05packet: read num_members once in packet_rcv_fanout()Eric Dumazet
[ Upstream commit f98f4514d07871da7a113dd9e3e330743fd70ae4 ] We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb417115fb ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600698dc ("packet: Add fanout support.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05bridge: fix br_stp_set_bridge_priority race conditionsNikolay Aleksandrov
[ Upstream commit 2dab80a8b486f02222a69daca6859519e05781d9 ] After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f258f19 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762e972 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f258f19 ("bridge: range check STP parameters") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05sctp: fix ASCONF list handlingMarcelo Ricardo Leitner
[ Upstream commit 2d45a02d0166caf2627fe91897c6ffc3b19514c4 ] ->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b67ae ("sctp: Add Auto-ASCONF support (core).") Reported-by: Ji Jianwen <jiji@redhat.com> Suggested-by: Neil Horman <nhorman@tuxdriver.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05net: don't wait for order-3 page allocationShaohua Li
[ Upstream commit fb05e7a89f500cfc06ae277bdc911b281928995d ] We saw excessive direct memory compaction triggered by skb_page_frag_refill. This causes performance issues and add latency. Commit 5640f7685831e0 introduces the order-3 allocation. According to the changelog, the order-3 allocation isn't a must-have but to improve performance. But direct memory compaction has high overhead. The benefit of order-3 allocation can't compensate the overhead of direct memory compaction. This patch makes the order-3 page allocation atomic. If there is no memory pressure and memory isn't fragmented, the alloction will still success, so we don't sacrifice the order-3 benefit here. If the atomic allocation fails, direct memory compaction will not be triggered, skb_page_frag_refill will fallback to order-0 immediately, hence the direct memory compaction overhead is avoided. In the allocation failure case, kswapd is waken up and doing compaction, so chances are allocation could success next time. alloc_skb_with_frags is the same. The mellanox driver does similar thing, if this is accepted, we must fix the driver too. V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric V2: make the changelog clearer Cc: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Debabrata Banerjee <dbavatar@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05bridge: fix multicast router rlist endless loopNikolay Aleksandrov
[ Upstream commit 1a040eaca1a22f8da8285ceda6b5e4a2cb704867 ] Since the addition of sysfs multicast router support if one set multicast_router to "2" more than once, then the port would be added to the hlist every time and could end up linking to itself and thus causing an endless loop for rlist walkers. So to reproduce just do: echo 2 > multicast_router; echo 2 > multicast_router; in a bridge port and let some igmp traffic flow, for me it hangs up in br_multicast_flood(). Fix this by adding a check in br_multicast_add_router() if the port is already linked. The reason this didn't happen before the addition of multicast_router sysfs entries is because there's a !hlist_unhashed check that prevents it. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 0909e11758bd ("bridge: Add multicast_router sysfs entries") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in ↵Sowmini Varadhan
softirq context [ Upstream commit 671d773297969bebb1732e1cdc1ec03aa53c6be2 ] Since it is possible for vnet_event_napi to end up doing vnet_control_pkt_engine -> ... -> vnet_send_attr -> vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc() (i.e., in softirq context), kzalloc() should be called with GFP_ATOMIC from ldc_alloc_exp_dring. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05hwmon: (mcp3021) Fix broken output scalingStevens, Nick
[ Upstream commit 347d7e45bd09ce09cbc30d5cea9de377eb22f55c ] The mcp3021 scaling code is dividing the VDD (full-scale) value in millivolts by the A2D resolution to obtain the scaling factor. When VDD is 3300mV (the standard value) and the resolution is 12-bit (4096 divisions), the result is a scale factor of 3300/4096, which is always one. Effectively, the raw A2D reading is always being returned because no scaling is applied. This patch fixes the issue and simplifies the register-to-volts calculation, removing the unneeded "output_scale" struct member. Signed-off-by: Nick Stevens <Nick.Stevens@digi.com> Cc: stable@vger.kernel.org # v3.10+ [Guenter Roeck: Dropped unnecessary value check] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05nfs: take extra reference to fl->fl_file when running a LOCKU operationJeff Layton
[ Upstream commit db2efec0caba4f81a22d95a34da640b86c313c8e ] Jean reported another crash, similar to the one fixed by feaff8e5b2cf: BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 IP: [<ffffffff8124ef7f>] locks_get_lock_context+0xf/0xa0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache vmw_vsock_vmci_transport vsock cfg80211 rfkill coretemp crct10dif_pclmul ppdev vmw_balloon crc32_pclmul crc32c_intel ghash_clmulni_intel pcspkr vmxnet3 parport_pc i2c_piix4 microcode serio_raw parport nfsd floppy vmw_vmci acpi_cpufreq auth_rpcgss shpchp nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi scsi_transport_spi mptscsih ata_generic mptbase i2c_core pata_acpi CPU: 0 PID: 329 Comm: kworker/0:1H Not tainted 4.1.0-rc7+ #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] 30ec000 RIP: 0010:[<ffffffff8124ef7f>] [<ffffffff8124ef7f>] locks_get_lock_context+0xf/0xa0 RSP: 0018:ffff8802330efc08 EFLAGS: 00010296 RAX: ffff8802330efc58 RBX: ffff880097187c80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff8802330efc18 R08: ffff88023fc173d8 R09: 3038b7bf00000000 R10: 00002f1a02000000 R11: 3038b7bf00000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8802337a2300 R15: 0000000000000020 FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000003680f000 CR4: 00000000001407f0 Stack: ffff880097187c80 ffff880097187cd8 ffff8802330efc98 ffffffff81250281 ffff8802330efc68 ffffffffa013e7df ffff8802330efc98 0000000000000246 ffff8801f6901c00 ffff880233d2b8d8 ffff8802330efc58 ffff8802330efc58 Call Trace: [<ffffffff81250281>] __posix_lock_file+0x31/0x5e0 [<ffffffffa013e7df>] ? rpc_wake_up_task_queue_locked.part.35+0xcf/0x240 [sunrpc] [<ffffffff8125088b>] posix_lock_file_wait+0x3b/0xd0 [<ffffffffa03890b2>] ? nfs41_wake_and_assign_slot+0x32/0x40 [nfsv4] [<ffffffffa0365808>] ? nfs41_sequence_done+0xd8/0x300 [nfsv4] [<ffffffffa0367525>] do_vfs_lock+0x35/0x40 [nfsv4] [<ffffffffa03690c1>] nfs4_locku_done+0x81/0x120 [nfsv4] [<ffffffffa013e310>] ? rpc_destroy_wait_queue+0x20/0x20 [sunrpc] [<ffffffffa013e310>] ? rpc_destroy_wait_queue+0x20/0x20 [sunrpc] [<ffffffffa013e33c>] rpc_exit_task+0x2c/0x90 [sunrpc] [<ffffffffa0134400>] ? call_refreshresult+0x170/0x170 [sunrpc] [<ffffffffa013ece4>] __rpc_execute+0x84/0x410 [sunrpc] [<ffffffffa013f085>] rpc_async_schedule+0x15/0x20 [sunrpc] [<ffffffff810add67>] process_one_work+0x147/0x400 [<ffffffff810ae42b>] worker_thread+0x11b/0x460 [<ffffffff810ae310>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff810b35d9>] kthread+0xc9/0xe0 [<ffffffff81010000>] ? perf_trace_xen_mmu_set_pmd+0xa0/0x160 [<ffffffff810b3510>] ? kthread_create_on_node+0x170/0x170 [<ffffffff8173c222>] ret_from_fork+0x42/0x70 [<ffffffff810b3510>] ? kthread_create_on_node+0x170/0x170 Code: a5 81 e8 85 75 e4 ff c6 05 31 ee aa 00 01 eb 98 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc 53 <48> 8b 9f 48 01 00 00 48 85 db 74 08 48 89 d8 5b 41 5c 5d c3 83 RIP [<ffffffff8124ef7f>] locks_get_lock_context+0xf/0xa0 RSP <ffff8802330efc08> CR2: 0000000000000148 ---[ end trace 64484f16250de7ef ]--- The problem is almost exactly the same as the one fixed by feaff8e5b2cf. We must take a reference to the struct file when running the LOCKU compound to prevent the final fput from running until the operation is complete. Reported-by: Jean Spector <jean@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05nfs: take extra reference to fl->fl_file when running a setlkJeff Layton
[ Upstream commit feaff8e5b2cfc3eae02cf65db7a400b0b9ffc596 ] We had a report of a crash while stress testing the NFS client: BUG: unable to handle kernel NULL pointer dereference at 0000000000000150 IP: [<ffffffff8127b698>] locks_get_lock_context+0x8/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge stp llc ebtables ip6table_security ip6table_mangle ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw ip6table_filter ip6_tables iptable_security iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw coretemp crct10dif_pclmul ppdev crc32_pclmul crc32c_intel ghash_clmulni_intel vmw_balloon serio_raw vmw_vmci i2c_piix4 shpchp parport_pc acpi_cpufreq parport nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi scsi_transport_spi mptscsih mptbase e1000 ata_generic pata_acpi CPU: 1 PID: 399 Comm: kworker/1:1H Not tainted 4.1.0-0.rc1.git0.1.fc23.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] task: ffff880036aea7c0 ti: ffff8800791f4000 task.ti: ffff8800791f4000 RIP: 0010:[<ffffffff8127b698>] [<ffffffff8127b698>] locks_get_lock_context+0x8/0x90 RSP: 0018:ffff8800791f7c00 EFLAGS: 00010293 RAX: ffff8800791f7c40 RBX: ffff88001f2ad8c0 RCX: ffffe8ffffc80305 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8800791f7c88 R08: ffff88007fc971d8 R09: 279656d600000000 R10: 0000034a01000000 R11: 279656d600000000 R12: ffff88001f2ad918 R13: ffff88001f2ad8c0 R14: 0000000000000000 R15: 0000000100e73040 FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 0000000001c0b000 CR4: 00000000000407e0 Stack: ffffffff8127c5b0 ffff8800791f7c18 ffffffffa0171e29 ffff8800791f7c58 ffffffffa0171ef8 ffff8800791f7c78 0000000000000246 ffff88001ea0ba00 ffff8800791f7c40 ffff8800791f7c40 00000000ff5d86a3 ffff8800791f7ca8 Call Trace: [<ffffffff8127c5b0>] ? __posix_lock_file+0x40/0x760 [<ffffffffa0171e29>] ? rpc_make_runnable+0x99/0xa0 [sunrpc] [<ffffffffa0171ef8>] ? rpc_wake_up_task_queue_locked.part.35+0xc8/0x250 [sunrpc] [<ffffffff8127cd3a>] posix_lock_file_wait+0x4a/0x120 [<ffffffffa03e4f12>] ? nfs41_wake_and_assign_slot+0x32/0x40 [nfsv4] [<ffffffffa03bf108>] ? nfs41_sequence_done+0xd8/0x2d0 [nfsv4] [<ffffffffa03c116d>] do_vfs_lock+0x2d/0x30 [nfsv4] [<ffffffffa03c251d>] nfs4_lock_done+0x1ad/0x210 [nfsv4] [<ffffffffa0171a30>] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [<ffffffffa0171a30>] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [<ffffffffa0171a5c>] rpc_exit_task+0x2c/0xa0 [sunrpc] [<ffffffffa0167450>] ? call_refreshresult+0x150/0x150 [sunrpc] [<ffffffffa0172640>] __rpc_execute+0x90/0x460 [sunrpc] [<ffffffffa0172a25>] rpc_async_schedule+0x15/0x20 [sunrpc] [<ffffffff810baa1b>] process_one_work+0x1bb/0x410 [<ffffffff810bacc3>] worker_thread+0x53/0x480 [<ffffffff810bac70>] ? process_one_work+0x410/0x410 [<ffffffff810bac70>] ? process_one_work+0x410/0x410 [<ffffffff810c0b38>] kthread+0xd8/0xf0 [<ffffffff810c0a60>] ? kthread_worker_fn+0x180/0x180 [<ffffffff817a1aa2>] ret_from_fork+0x42/0x70 [<ffffffff810c0a60>] ? kthread_worker_fn+0x180/0x180 Jean says: "Running locktests with a large number of iterations resulted in a client crash. The test run took a while and hasn't finished after close to 2 hours. The crash happened right after I gave up and killed the test (after 107m) with Ctrl+C." The crash happened because a NULL inode pointer got passed into locks_get_lock_context. The call chain indicates that file_inode(filp) returned NULL, which means that f_inode was NULL. Since that's zeroed out in __fput, that suggests that this filp pointer outlived the last reference. Looking at the code, that seems possible. We copy the struct file_lock that's passed in, but if the task is signalled at an inopportune time we can end up trying to use that file_lock in rpciod context after the process that requested it has already returned (and possibly put its filp reference). Fix this by taking an extra reference to the filp when we allocate the lock info, and put it in nfs4_lock_release. Reported-by: Jean Spector <jean@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05fuse: initialize fc->release before calling itMiklos Szeredi
[ Upstream commit 0ad0b3255a08020eaf50e34ef0d6df5bdf5e09ed ] fc->release is called from fuse_conn_put() which was used in the error cleanup before fc->release was initialized. [Jeremiah Mahler <jmmahler@gmail.com>: assign fc->release after calling fuse_conn_init(fc) instead of before.] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Fixes: a325f9b92273 ("fuse: update fuse_conn_init() and separate out fuse_conn_kill()") Cc: <stable@vger.kernel.org> #v2.6.31+ Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05rbd: use GFP_NOIO in rbd_obj_request_create()Ilya Dryomov
[ Upstream commit 5a60e87603c4c533492c515b7f62578189b03c9c ] rbd_obj_request_create() is called on the main I/O path, so we need to use GFP_NOIO to make sure allocation doesn't blow back on us. Not all callers need this, but I'm still hardcoding the flag inside rather than making it a parameter because a) this is going to stable, and b) those callers shouldn't really use rbd_obj_request_create() and will be fixed in the future. More memory allocation fixes will follow. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05net: mvneta: disable IP checksum with jumbo frames for Armada 370Simon Guinot
[ Upstream commit b65657fc240ae6c1d2a1e62db9a0e61ac9631d7a ] The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes. This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ARM: mvebu: update Ethernet compatible string for Armada XPSimon Guinot
[ Upstream commit ea3b55fe83b5fcede82d183164b9d6831b26e33b ] This patch updates the Ethernet DT nodes for Armada XP SoCs with the compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: 77916519cba3 ("arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05net: mvneta: introduce compatible string "marvell, armada-xp-neta"Simon Guinot
[ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ] The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05drm/radeon: SDMA fix hibernation (CI GPU family).Jérôme Glisse
[ Upstream commit 2ba8d1bb8f6b589037f7db1f01144fc80750e8f7 ] In order for hibernation to reliably work we need to properly turn off the SDMA block, sadly after numerous attemps i haven't not found proper sequence for clean and full shutdown. So simply reset both SDMA block, this makes hibernation works reliably on sea island GPU family (CI) Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Cc: stable@vger.kernel.org Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05drm/radeon: compute ring fix hibernation (CI GPU family) v2.Jérôme Glisse
[ Upstream commit 161569deaa03cf3c00ed63352006193f250b0648 ] In order for hibernation to reliably work we need to cleanup more thoroughly the compute ring. Hibernation is different from suspend resume as when we resume from hibernation the hardware is first fully initialize by regular kernel then freeze callback happens (which correspond to a suspend inside the radeon kernel driver) and turn off each of the block. It turns out we were not cleanly shutting down the compute ring. This patch fix that. Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Changed since v1: - Factor the ring stop logic into a function taking ring as arg. Cc: stable@vger.kernel.org Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05agp/intel: Fix typo in needs_ilk_vtd_wa()Chris Wilson
[ Upstream commit 8b572a4200828b4e75cc22ed2f494b58d5372d65 ] In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against the ids for the mobile GPU and the mobile host bridge. That latter is impossible and so likely was just a typo for the desktop GPU device id (which is also buggy). Fixes commit da88a5f7f7d434e2cde1b3e19d952e6d84533662 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 13 09:31:53 2013 +0000 drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK Reported-by: Ting-Wei Lan <lantw44@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127 References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780Takashi Iwai
[ Upstream commit 4df3fd1700abbb53bd874143dfd1f9ac9e7cbf4b ] Fujitsu Lifebook E780 sets the sequence number 0x0f to only only of the two headphones, thus the driver tries to assign another as the line-out, and this results in the inconsistent mapping between the created jack ctl and the actual I/O. Due to this, PulseAudio doesn't handle it properly and gets the silent output. The fix is to ignore the non-HP sequencer checks. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99681 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ALSA: hda - Add headset support to Acer Aspire V5Takashi Iwai
[ Upstream commit 7819717b11346b8a5420b223b46600e394049c66 ] Acer Aspire V5 with ALC282 codec needs the similar quirk like Dell laptops to support the headset mic. The headset mic pin is 0x19 and it's not exposed by BIOS, thus we need to fix the pincfg as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifierDamian Eppel
[ Upstream commit 56a94f13919c0db5958611b388e1581b4852f3c9 ] Whilst testing cpu hotplug events on kernel configured with DEBUG_PREEMPT and DEBUG_ATOMIC_SLEEP we get following BUG message, caused by calling request_irq() and free_irq() in the context of hotplug notification (which is in this case atomic context). [ 40.785859] CPU1: Software reset [ 40.786660] BUG: sleeping function called from invalid context at mm/slub.c:1241 [ 40.786668] in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/1 [ 40.786678] Preemption disabled at:[< (null)>] (null) [ 40.786681] [ 40.786692] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc4-00024-g7dca860 #36 [ 40.786698] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 40.786728] [<c0014a00>] (unwind_backtrace) from [<c0011980>] (show_stack+0x10/0x14) [ 40.786747] [<c0011980>] (show_stack) from [<c0449ba0>] (dump_stack+0x70/0xbc) [ 40.786767] [<c0449ba0>] (dump_stack) from [<c00c6124>] (kmem_cache_alloc+0xd8/0x170) [ 40.786785] [<c00c6124>] (kmem_cache_alloc) from [<c005d6f8>] (request_threaded_irq+0x64/0x128) [ 40.786804] [<c005d6f8>] (request_threaded_irq) from [<c0350b8c>] (exynos4_local_timer_setup+0xc0/0x13c) [ 40.786820] [<c0350b8c>] (exynos4_local_timer_setup) from [<c0350ca8>] (exynos4_mct_cpu_notify+0x30/0xa8) [ 40.786838] [<c0350ca8>] (exynos4_mct_cpu_notify) from [<c003b330>] (notifier_call_chain+0x44/0x84) [ 40.786857] [<c003b330>] (notifier_call_chain) from [<c0022fd4>] (__cpu_notify+0x28/0x44) [ 40.786873] [<c0022fd4>] (__cpu_notify) from [<c0013714>] (secondary_start_kernel+0xec/0x150) [ 40.786886] [<c0013714>] (secondary_start_kernel) from [<40008764>] (0x40008764) Interrupts cannot be requested/freed in the CPU_STARTING/CPU_DYING notifications which run on the hotplugged cpu with interrupts and preemption disabled. To avoid the issue, request the interrupts for all possible cpus in the boot code. The interrupts are marked NO_AUTOENABLE to avoid a racy request_irq/disable_irq() sequence. The flag prevents the request_irq() code from enabling the interrupt immediately. The interrupt is then enabled in the CPU_STARTING notifier of the hotplugged cpu and again disabled with disable_irq_nosync() in the CPU_DYING notifier. [ tglx: Massaged changelog to match the patch ] Fixes: 7114cd749a12 ("clocksource: exynos_mct: use (request/free)_irq calls for local timer registration") Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Signed-off-by: Damian Eppel <d.eppel@samsung.com> Cc: m.szyprowski@samsung.com Cc: kyungmin.park@samsung.com Cc: daniel.lezcano@linaro.org Cc: kgene@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1435324984-7328-1-git-send-email-d.eppel@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05tracing/filter: Do not allow infix to exceed end of stringSteven Rostedt (Red Hat)
[ Upstream commit 6b88f44e161b9ee2a803e5b2b1fbcf4e20e8b980 ] While debugging a WARN_ON() for filtering, I found that it is possible for the filter string to be referenced after its end. With the filter: # echo '>' > /sys/kernel/debug/events/ext4/ext4_truncate_exit/filter The filter_parse() function can call infix_get_op() which calls infix_advance() that updates the infix filter pointers for the cnt and tail without checking if the filter is already at the end, which will put the cnt to zero and the tail beyond the end. The loop then calls infix_next() that has ps->infix.cnt--; return ps->infix.string[ps->infix.tail++]; The cnt will now be below zero, and the tail that is returned is already passed the end of the filter string. So far the allocation of the filter string usually has some buffer that is zeroed out, but if the filter string is of the exact size of the allocated buffer there's no guarantee that the charater after the nul terminating character will be zero. Luckily, only root can write to the filter. Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05s390/kdump: fix REGSET_VX_LOW vector register ELF notesMichael Holzheu
[ Upstream commit 3c8e5105e759e7b2d88ea8a85b1285e535bc7500 ] The REGSET_VX_LOW ELF notes should contain the lower 64 bit halfes of the first sixteen 128 bit vector registers. Unfortunately currently we copy the upper halfes. Fix this and correctly copy the lower halfes. Fixes: a62bc0739253 ("s390/kdump: add support for vector extension") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ALSA: hda - set proper caps for newer AMD hda audio in KB/KVAlex Deucher
[ Upstream commit 650474fb737c3e0ea0f6ab8e43c2cd161080ce5c ] Fixes audio problems on newer asics. Noticed by: Kelly Anderson <kelly@xilka.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ALSA: hda - Fix Dock Headphone on Thinkpad X250 seen as a Line OutDavid Henningsson
[ Upstream commit ec56af67a10a0d82b79027878a81fce08d002d50 ] Thinkpad X250, when attached to a dock, has two headphone outs but no line out. Make sure we don't try to turn this into one headphone and one line out (since that disables the headphone amp on the dock). Alsa-info at http://www.alsa-project.org/db/?f=36f8764e1d782397928feec715d0ef90dfddd4c1 Cc: stable@vger.kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc()Larry Finger
[ Upstream commit 8a8c35fadfaf55629a37ef1a8ead1b8fb32581d2 ] Beginning at commit d52d3997f843 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05mm: kmemleak: allow safe memory scanning during kmemleak disablingCatalin Marinas
[ Upstream commit c5f3b1a51a591c18c8b33983908e7fdda6ae417e ] The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ARC: add smp barriers around atomics per Documentation/atomic_ops.txtVineet Gupta
[ Upstream commit 2576c28e3f623ed401db7e6197241865328620ef ] - arch_spin_lock/unlock were lacking the ACQUIRE/RELEASE barriers Since ARCv2 only provides load/load, store/store and all/all, we need the full barrier - LLOCK/SCOND based atomics, bitops, cmpxchg, which return modified values were lacking the explicit smp barriers. - Non LLOCK/SCOND varaints don't need the explicit barriers since that is implicity provided by the spin locks used to implement the critical section (the spin lock barriers in turn are also fixed in this commit as explained above Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ARC: add compiler barrier to LLSC based cmpxchgVineet Gupta
[ Upstream commit d57f727264f1425a94689bafc7e99e502cb135b5 ] When auditing cmpxchg call sites, Chuck noted that gcc was optimizing away some of the desired LDs. | do { | new = old = *ipi_data_ptr; | new |= 1U << msg; | } while (cmpxchg(ipi_data_ptr, old, new) != old); was generating to below | 8015cef8: ld r2,[r4,0] <-- First LD | 8015cefc: bset r1,r2,r1 | | 8015cf00: llock r3,[r4] <-- atomic op | 8015cf04: brne r3,r2,8015cf10 | 8015cf08: scond r1,[r4] | 8015cf0c: bnz 8015cf00 | | 8015cf10: brne r3,r2,8015cf00 <-- Branch doesn't go to orig LD Although this was fixed by adding a ACCESS_ONCE in this call site, it seems safer (for now at least) to add compiler barrier to LLSC based cmpxchg Reported-by: Chuck Jordan <cjordan@synopsys,com> Cc: <stable@vger.kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05PM / sleep: Increase default DPM watchdog timeout to 60Takashi Iwai
[ Upstream commit fff3b16d2754a061a3549c4307a186423a0128fd ] Many harddisks (mostly WD ones) have firmware problems and take too long, more than 10 seconds, to resume from suspend. And this often exceeds the default DPM watchdog timeout (12 seconds), resulting in a kernel panic out of sudden. Since most distros just take the default as is, we should give a bit more safer value. This patch increases the default value from 12 seconds to one minute, which has been confirmed to be long enough for such problematic disks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921 Fixes: 70fea60d888d (PM / Sleep: Detect device suspend/resume lockup and log event) Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05stmmac: troubleshoot unexpected bits in des0 & des1Alexey Brodkin
[ Upstream commit f1590670ce069eefeb93916391a67643e6ad1630 ] Current implementation of descriptor init procedure only takes care about setting/clearing ownership flag in "des0"/"des1" fields while it is perfectly possible to get unexpected bits set because of the following factors: [1] On driver probe underlying memory allocated with dma_alloc_coherent() might not be zeroed and so it will be filled with garbage. [2] During driver operation some bits could be set by SD/MMC controller (for example error flags etc). And unexpected and/or randomly set flags in "des0"/"des1" fields may lead to unpredictable behavior of GMAC DMA block. This change addresses both items above with: [1] Use of dma_zalloc_coherent() instead of simple dma_alloc_coherent() to make sure allocated memory is zeroed. That shouldn't affect performance because this allocation only happens once on driver probe. [2] Do explicit zeroing of both "des0" and "des1" fields of all buffer descriptors during initialization of DMA transfer. And while at it fixed identation of dma_free_coherent() counterpart as well. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05of/address: use atomic allocation in pci_register_io_range()Jingoo Han
[ Upstream commit 294240ffe784e951dc2ef070da04fa31ef6db3a0 ] When kzalloc() is called under spin_lock(), GFP_ATOMIC should be used to avoid sleeping allocation. The call tree is: of_pci_range_to_resource() --> pci_register_io_range() <-- takes spin_lock(&io_range_lock); --> kzalloc() Signed-off-by: Jingoo Han <jingoohan1@gmail.com> Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05netfilter: nf_qeueue: Drop queue entries on nf_unregister_hookEric W. Biederman
[ Upstream commit 8405a8fff3f8545c888a872d6e3c0c8eecd4d348 ] Add code to nf_unregister_hook to flush the nf_queue when a hook is unregistered. This guarantees that the pointer that the nf_queue code retains into the nf_hook list will remain valid while a packet is queued. I tested what would happen if we do not flush queued packets and was trivially able to obtain the oops below. All that was required was to stop the nf_queue listening process, to delete all of the nf_tables, and to awaken the nf_queue listening process. > BUG: unable to handle kernel paging request at 0000000100000001 > IP: [<0000000100000001>] 0x100000001 > PGD b9c35067 PUD 0 > Oops: 0010 [#1] SMP > Modules linked in: > CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted > task: ffff8800b9c8c050 ti: ffff8800ba9d8000 task.ti: ffff8800ba9d8000 > RIP: 0010:[<0000000100000001>] [<0000000100000001>] 0x100000001 > RSP: 0018:ffff8800ba9dba40 EFLAGS: 00010a16 > RAX: ffff8800bab48a00 RBX: ffff8800ba9dba90 RCX: ffff8800ba9dba90 > RDX: ffff8800b9c10128 RSI: ffff8800ba940900 RDI: ffff8800bab48a00 > RBP: ffff8800b9c10128 R08: ffffffff82976660 R09: ffff8800ba9dbb28 > R10: dead000000100100 R11: dead000000200200 R12: ffff8800ba940900 > R13: ffffffff8313fd50 R14: ffff8800b9c95200 R15: 0000000000000000 > FS: 00007fb91fc34700(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000100000001 CR3: 00000000babfb000 CR4: 00000000000007f0 > Stack: > ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8 > ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128 > ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0 > Call Trace: > [<ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0 > [<ffffffff8206bd65>] ? nf_reinject+0x125/0x190 > [<ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360 > [<ffffffff81386290>] ? nla_parse+0x80/0xf0 > [<ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240 > [<ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150 > [<ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20 > [<ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0 > [<ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0 > [<ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650 > [<ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50 > [<ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0 > [<ffffffff810e8f73>] ? __wake_up+0x43/0x70 > [<ffffffff8141a134>] ? tty_write+0x1c4/0x2a0 > [<ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80 > [<ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a > Code: Bad RIP value. > RIP [<0000000100000001>] 0x100000001 > RSP <ffff8800ba9dba40> > CR2: 0000000100000001 > ---[ end trace 08eb65d42362793f ]--- Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05NET: ROSE: Don't dereference NULL neighbour pointer.Ralf Baechle
[ Upstream commit d496f7842aada20c61e6044b3395383fa972872c ] A ROSE socket doesn't necessarily always have a neighbour pointer so check if the neighbour pointer is valid before dereferencing it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Bernard Pidoux <f6bvp@free.fr> Cc: stable@vger.kernel.org #2.6.11+ Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05drm/dp/mst: take lock around looking up the branch device on hpd irqDave Airlie
[ Upstream commit 9eb1e57f564d4e6e10991402726cc83fe0b9172f ] If we are doing an MST transaction and we've gotten HPD and we lookup the device from the incoming msg, we should take the mgr lock around it, so that mst_primary and mstb->ports are valid. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05drm/dp/mst: make sure mst_primary mstb is valid in work functionDaniel Vetter
[ Upstream commit 9254ec496a1dbdddeab50021a8138dc627a8166a ] This validates the mst_primary under the lock, and then calls into the check and send function. This makes the code a lot easier to understand the locking rules in. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05ext4: don't retry file block mapping on bigalloc fs with non-extent fileDarrick J. Wong
[ Upstream commit 292db1bc6c105d86111e858859456bcb11f90f91 ] ext4 isn't willing to map clusters to a non-extent file. Don't signal this with an out of space error, since the FS will retry the allocation (which didn't fail) forever. Instead, return EUCLEAN so that the operation will fail immediately all the way back to userspace. (The fix is either to run e2fsck -E bmap2extent, or to chattr +e the file.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05xfs: fix remote symlinks on V5/CRC filesystemsEric Sandeen
[ Upstream commit 2ac56d3d4bd625450a54d4c3f9292d58f6b88232 ] If we create a CRC filesystem, mount it, and create a symlink with a path long enough that it can't live in the inode, we get a very strange result upon remount: # ls -l mnt total 4 lrwxrwxrwx. 1 root root 929 Jun 15 16:58 link -> XSLM XSLM is the V5 symlink block header magic (which happens to be followed by a NUL, so the string looks terminated). xfs_readlink_bmap() advanced cur_chunk by the size of the header for CRC filesystems, but never actually used that pointer; it kept reading from bp->b_addr, which is the start of the block, rather than the start of the symlink data after the header. Looks like this problem goes back to v3.10. Fixing this gets us reading the proper link target, again. Cc: stable@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-05MIPS: Fix KVM guest fixmap addressJames Hogan
[ Upstream commit 8e748c8d09a9314eedb5c6367d9acfaacddcdc88 ] KVM guest kernels for trap & emulate run in user mode, with a modified set of kernel memory segments. However the fixmap address is still in the normal KSeg3 region at 0xfffe0000 regardless, causing problems when cache alias handling makes use of them when handling copy on write. Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped region when CONFIG_KVM_GUEST is defined. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+ Patchwork: https://patchwork.linux-mips.org/patch/9887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-03ext4: call sync_blockdev() before invalidate_bdev() in put_super()Theodore Ts'o
[ Upstream commit 89d96a6f8e6491f24fc8f99fd6ae66820e85c6c1 ] Normally all of the buffers will have been forced out to disk before we call invalidate_bdev(), but there will be some cases, where a file system operation was aborted due to an ext4_error(), where there may still be some dirty buffers in the buffer cache for the device. So try to force them out to memory before calling invalidate_bdev(). This fixes a warning triggered by generic/081: WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f() Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-03arm64: vdso: work-around broken ELF toolchains in MakefileWill Deacon
[ Upstream commit 6f1a6ae87c0c60d7c462ef8fd071f291aa7a9abb ] When building the kernel with a bare-metal (ELF) toolchain, the -shared option may not be passed down to collect2, resulting in silent corruption of the vDSO image (in particular, the DYNAMIC section is omitted). The effect of this corruption is that the dynamic linker fails to find the vDSO symbols and libc is instead used for the syscalls that we intended to optimise (e.g. gettimeofday). Functionally, there is no issue as the sigreturn trampoline is still intact and located by the kernel. This patch fixes the problem by explicitly passing -shared to the linker when building the vDSO. Cc: <stable@vger.kernel.org> Reported-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com> Reported-by: James Greenlaigh <james.greenhalgh@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-03Bluetooth: ath3k: Add support of 04ca:300d AR3012 deviceDmitry Tunin
[ Upstream commit 7e730c7f3d1f39c25cf5f7cf70c0ff4c28d7bec7 ] BugLink: https://bugs.launchpad.net/bugs/1394368 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-28 14:10:33 +0000