summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-12apalis/colibri_t30: remove spurious tegra_aes_devicePeter Gielda
Remove tegra_aes_device from the platform device list as it was listed twice.
2013-06-12video: tegra: nvmap: fix CONFIG_NVMAP_PAGE_POOLS=n compilationPeter Gielda
Move paddr to correct ifdef to enable CONFIG_NVMAP_PAGE_POOLS=n compilation.
2013-06-12media: videobuf2: fix buffer management issuesBryan Wu
Use right buffer flag NVMAP_HANDLE_WRITE_COMBINE to allocate buffer, which can be shared by VI/CSI and CPU. Don't use NVMAP_HEAP_SYSMEM. It is validated to old T20 silicon and can't support big buffers. By default, our nvmap_alloc() will use IOVMM to allocate buffers. nvmap_pin() gives us IOVA for hardware engines like VI/CSI module with IOMMU enabled in kernel. nvmap_mmap() gives us VA for CPU read/write operations. So we need to convert VA address to physical address of the buffer and map that buffer to user space processor's memory space "page by page". Change-Id: I543d9d95fc14395200647e09480f25d9bc001e00 Signed-off-by: Bryan Wu <pengw@nvidia.com>
2013-06-12Revert "tegra_v4l2: map memory as non-cachable and fix the allocation problem"Peter Gielda
This reverts commit 080c3135b58aa700851991fb672e6c33cf16d9d9.
2013-06-12colibri_t20: v4l2: adv7180 integrationPeter Gielda
Integrate ADV7180 video decoder support. While at it prepare for ADV7180 as well as MAX9526 drivers as module.
2013-06-12max9526: added missing module_exitPeter Gielda
2013-06-12tegra_v4l2 fix init issuePeter Gielda
Fix issue with nvhost_client_device_init being issued more than once.
2013-06-12colibri_t20: support for tegra_v4l2_camera as modulePiotr Zierhoffer
2013-06-12video: tegra: nvmap: export symbols to build tegra_v4l2_camera modulePiotr Zierhoffer
2013-06-07tegra: pcie: fix AXI response decoding errorsMarcel Ziswiler
Avoid AXI response decoding errors of the following form by properly setting the root bus number: [ 3.377991] PCIE: AXI response decoding error, signature: ff01003d [ 3.384174] PCIE: AXI response decoding error, signature: ff01003c
2013-06-07apalis_t30: fix PCIe reset issueMarcel Ziswiler
Implement workaround for PLX PEX 8605 errata 5 (PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed Until 900 us After PEX_PERST# De-assertion) by releasing RESET_MOCI_N 1 ms after releasing PEX_PERST_N.
2013-06-05colibri_t20/30: add comment about GMI_ADV_N usageMarcel Ziswiler
Add a comment about conflicting use of SODIMM pin 150 as GPIO K0 resp. GMI_ADV_N used for multiplexed address/data bus courtesy of Stéphane Gonnella from Multitel ASBL.
2013-05-28tegra: pcie: revert driverMarcel Ziswiler
Revert the following commit: 4bb48c289cdfddf02673b5b3dd1a735dfd5d972e
2013-05-27colibri_t30: export some gpio on /sys/class/gpio/...Max Krummenacher
Added skeleton code to define userspace accessable gpio. Export gpios which are unlikely to be used for other functions.
2013-05-09net: igb: apalis_t30: revise Ethernet MAC address assignmentMarcel Ziswiler
Revise Ethernet MAC address assignment: should now handle up to two instances of custom user MACs (2nd one with a 0x100000 offset). This way customer does not have to worry about NVM on a secondary Ethernet on the carrier board and still gets a valid official MAC address from us (e.g. analogous to how we did it on our Protea carrier board).
2013-05-02tegra_v4l2: added missing breakMax Krummenacher
bug report courtesy of Mikhail Shevchuk
2013-04-23colibri_t20: mmc: sdhci: fix buildMarcel Ziswiler
Fix the following build issue introduced by commit 5cfcbc23d116927a7ae8d5b67baeacf2905b21f9 if neither CONFIG_MACH_APALIS_T30 nor CONFIG_MACH_COLIBRI_T30 is defined as in case of e.g. the Colibri T20: drivers/mmc/host/sdhci-tegra.c:951:2: error: expected expression before '.' token
2013-04-18USB: option: add Novatel E362 and Dell Wireless 5800 USB IDsDan Williams
The Dell 5800 appears to be a simple rebrand of the Novatel E362. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-18USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-18apalis/colibri_t30: mmc: sdhci: hack to make newer cards workMarcel Ziswiler
SDR12, SDR25, SDR50, SDR104 and DDR50 all require 1.8V signalling which our current T30 designs can't do. Newer cards will fail as follows: Kingston 32GB microSDHC class 10 [ 69.000280] mmc1: error -84 whilst initialising SD card SanDisk Mobile Ultra 8GB microSDHC I [ 28.289174] mmc1: error -110 whilst initialising SD card This patch activates a quirk which signals our lack of 1.8V support.
2013-04-18mmc: sdhci: add quirk for lack of 1.8v supportDaniel Drake
The OLPC XO-1.75 laptop includes a SDHCI controller which is 1.8v capable, and it truthfully reports so in its capabilities. This alternate voltage is used for driving new "UHS-I" SD cards at their full speed. However, what the controller doesn't know is that the motherboard physically doesn't have a 1.8v supply available. Add a quirk so that systems such as this one can override disable 1.8v support, adding support for UHS-I cards (by running them at 3.3v). This avoids a problem where the system would first try to run the card at 1.8v, fail, and then not be able to fully reset the card to retry at the normal 3.3v voltage. This is more appropriate than using the MISSING_CAPS quirk, which is intended for cases where the SDHCI controller is actually lying about its capabilities, and would force us to somehow override both caps words from another source. Signed-off-by: Daniel Drake <dsd@laptop.org> Reviewed-by: Philip Rakity <prakity@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-16net: asix: fix Ethernet MAC address assignment after suspendMarcel Ziswiler
Turns out after suspend an unbind and bind operation is executed upon which we subsequently gave out the 2nd custom user MAC address followed by the default ASIX MAC address. This patch fixes it by checking for the custom user MAC address upon unbinding and in this case properly releasing it for subsequent reuse.
2013-04-12max9526: commented out some of the warnings. added interlace flag. fixed ↵Peter Gielda
resolution for PAL/NTSC.
2013-04-12tegra_v4l2: added interlaced video handling for VIPPeter Gielda
2013-04-12tegra_v4l2: map memory as non-cachable and fix the allocation problemPeter Gielda
2013-04-12tegra_v4l2: fixed bugs in memory allocation/deallocationPeter Gielda
2013-04-02input: touchscreen: android ics fusion_F0710A driver variantMarcel Ziswiler
For Android use ICS variant of Fusion 7 and 10 multi-touch driver (See Fusion 7 and 10 drivers for Linux.pdf and Linux Drivers Fusion 10.zip). Tested to be working both with Android 4.0.4 for Colibri T20 as well as Android 4.2.1 for Colibri T30.
2013-04-02colibri_t20: android: enable back key wakeMarcel Ziswiler
Enable the back key as a wake-up source as well.
2013-04-02colibri_t20: android: use 32bppMarcel Ziswiler
Use 32 rather than 16 bits per pixel as otherwise it looks so ugly.
2013-03-26media: adv7180: Modify to work with soc_cameraAndrew Chew
This involved adding some callback methods, and pretending that this is a YUV sensor. Signed-off-by: Andrew Chew <achew@nvidia.com>
2013-03-24colibri_t20: android: kernel configurationMarcel Ziswiler
Add initial Android kernel configuration adopted from tegra_android_defconfig.
2013-03-24Revert "colibri_t20: android: 720p as default none VGA TFTLCD resolution"Marcel Ziswiler
Due to 720p not working well with most regular analogue screens and as customers rather might want to evaluate using our 7 inch EDT ET070080DH6 panel revert to 800x480 if not default VGA TFTLCD resolution is chosen. This reverts commit 0fc41ea361c79175f2076a349a0ba0dcc7e71131.
2013-03-24colibri_t20: android: revert to default VGA TFTLCD resolutionMarcel Ziswiler
As customers might want to evaluate using a regular VGA screen or our 5.7 inch EDT ET057090DHU panel revert to default VGA TFTLCD resolution. This is a partial revert of the following commit: 106ac0436290a98ecc5e3dfc75d0d7f104ef0ff4
2013-03-24input: touchscreen: wm97xx-core: android idc parser hackMarcel Ziswiler
The Android idc parser seems to have an issue with spaces in names: D/EventHub( 159): No input device configuration file found for device 'wm97xx touchscreen'. Rename the driver in order for the idc parser to recognise idc file /system/usr/idc/wm97xx-ts.idc being a simple copy of the qwerty.idc one.
2013-03-24input: touchscreen: wm97xx-core: android orientation hackMarcel Ziswiler
Rotate touch for now due to missing resistive touch calibration integration. This makes our 5.7 inch EDT ET057090DHU panel usable.
2013-03-24colibri_t20: fix menu-keyMarcel Ziswiler
Due to a strong pull-down on the menu-key multiplexed ACC1_DETECT pin Android unintentionally entered safe-mode. Fix this by making the menu-key active-high as well.
2013-03-14apalis_t30: Realtek HDA hackApalis_T30_LinuxImageV2.0Alpha1_20130315Marcel Ziswiler
Hack for Realtek HDA driver not to crash due to PCI structure not being initialised as expected.
2013-03-14apalis_t30: default full HD LVDS resolutionMarcel Ziswiler
By default configure for LG LP156WF1 15.6 inch full HD dual channel LVDS panel.
2013-03-14apalis_t30: audio: integrate HDA codec supportMarcel Ziswiler
Integrate support for the Realtek ALC898 as found on the Apalis Evaluation Board V1.0a. Please note that the following HDA rewiring needs to be done: remove jumpers X6-5 and 7 to 9 rewire as follows: X5 X7 5 9 7 8 8 5 9 7 Please further note that currently only noise is heard during playback.
2013-03-13board-colibri-t20: do not set PWM<A>, PWM<D> as GPIO inputMax Krummenacher
SODIMM-59, SODIMM-67 is no longer a GPIO and thus the PWM are usable again. PWM<D>
2013-03-12colibri_t20/30: usb: otg: fix host to peripheral transitionMarcel Ziswiler
Fix null pointer during USB OTG host to peripheral transition caused by freeing the platform data twice. See the following Tegra OTG driver commit for reference: 8acf989d5896b152cc88f8b29afd11d522f903e3
2013-03-12colibri_t20/30: can: integrate mcp251x and sja1000 supportMarcel Ziswiler
Integrate CAN support for the Colibri Evaluation Board V3.1a with built-in MCP2515 SPI CAN controller resp. the Colibri Evaluation Board V2.1c with its built-in SJA1000 CAN controller connected to the GMI bus. The following kernel configuration needs to be enabled as well: CONFIG_CAN CONFIG_CAN_RAW CONFIG_CAN_BCM CONFIG_CAN_DEV Plus depending on the Evaluation Board revision: CONFIG_CAN_MCP251X or CONFIG_CAN_SJA1000 CONFIG_CAN_SJA1000_PLATFORM Optional support for 32-bit GMI as well as xPOD CAN on MECS Tellurium for Colibri T20 is provided via commented defines in arch/arm/mach-tegra/board-colibri_t20.h.
2013-03-06colibri_t30: android: kernel configurationMarcel Ziswiler
Add initial Android kernel configuration adopted from tegra3_android_defconfig.
2013-03-06colibri_t30: android: enable hdaMarcel Ziswiler
Unless HDA driver is enabled device enters safe mode upon start-up.
2013-03-06colibri_t30: android: hack to allow using cardhu initrdMarcel Ziswiler
NVIDIA's Android for their Cardhu developer tablet is looking for the machine name in order to initialise certain things. For now just hack it to be able to use their regular initrd.
2013-03-06colibri_t30: android: 32 bits per pixelMarcel Ziswiler
Android uses 32 bits per pixel and fails otherwise. While at it increase the default DVI-D aka HDMI resolution to full HD.
2013-03-03colibri_t20/30: v4l2: max9526 integrationMarcel Ziswiler
Integrate MAX9526 video decoder support as found on our analogous camera module (ACM) connected to a Colibri Evaluation carrier board. The following kernel configuration options are required to be enabled: CONFIG_VIDEO_V4L2=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_MAX9526=y CONFIG_VIDEO_TEGRA=y
2013-03-03max9526 driverPeter Gielda
2013-03-03tegra: When using V4L2, don't use vi client.Andrew Chew
The VI client within drivers/video/tegra is mutually exclusive with the Tegra V4L2 framework, since they both want to own the camera hardware. Signed-off-by: Andrew Chew <achew@nvidia.com>
2013-03-03Make it accessible outside of drivers/video/tegra. V4L2 driver needs toAndrew Chew
set some platform_data. Signed-off-by: Andrew Chew <achew@nvidia.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 17:24:59 +0000