Age | Commit message (Collapse) | Author |
|
According to Realtek, the firmware provides
power optimizations. The driver works without
the firmware. Plus, there are scenarios where
the firmware is not available, which makes the
driver wait at request_firmware call (i.e.,
60 sec wait).
Bug 1236060
Bug 991551
Change-Id: Ifcaa4b2dd48c4111ded33cf2bade7dc1f6422821
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/258353
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Trinity discovered that we fail to check all 64 bits of
attr.config passed by user space, resulting to out-of-bounds
access of the perf_swevent_enabled array in
sw_perf_event_destroy().
Introduced in commit b0a873ebb ("perf: Register PMU
implementations").
Bug 1289245
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
(cherry picked from commit 8176cced706b5e5d15887584150764894e94e02f)
Change-Id: Idde0330d7430f2ba1645f4dfed063c5df9bbb44a
Reviewed-on: http://git-master/r/228851
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Bo Yan <byan@nvidia.com>
|
|
This change is intended to add a few modifications to
cardhu board file (which is also used for beaver)
to get rid of NACK errors occuring due to the absence
of certain hardware components on beaver
Bug 1217572
Change-Id: I1df7b7f777014610e4d64695d89324808ea4f266
Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com>
Reviewed-on: http://git-master/r/215983
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Ramalingam C <ramalingamc@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Cleaning up of the vdd_ldo4 regulator handling and also control
the multiple calls for regulator_get call for vdd_ldo4
Bug 1241274
Change-Id: I0f62d5059212302956bfe7e48d24eb7f45ff2dda
Signed-off-by: Ramalingam C <ramalingamc@nvidia.com>
Reviewed-on: http://git-master/r/207516
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
This change is intended to add modifications to
cardhu board file (which is also used for beaver)
to get rid of NACK errors occuring due to the absence
of certain hardware components on beaver
Bug 1217572
Change-Id: I36dfcda1b133c983ce25d56729505bce8b99fdf1
Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com>
Reviewed-on: http://git-master/r/193667
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Disabled CONFIG_INPUT_MOUSEDEV to avoid kernel registering PS/2 mouse
devices, which are mostly not in use now.
Bug 1162832
Change-Id: I0b44af668fa94ffc589e646a842259afa837731e
Signed-off-by: Naveen Kumar S <nkumars@nvidia.com>
Reviewed-on: http://git-master/r/187807
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Disabled CONFIG_INPUT_MOUSEDEV to avoid kernel registering PS/2 mouse
devices, which are mostly not in use now.
Bug 1162832
Change-Id: If47e654063934d3b60d033a0d2523b8caf97825b
Signed-off-by: Naveen Kumar S <nkumars@nvidia.com>
Reviewed-on: http://git-master/r/187808
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Enable OV5650 sensor in Cardhu board file with the help of Tegra
V4L2 SoC camera interface.
Change-Id: I6ff8456941267c05986760f46f658962a940d07e
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200226
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
CSI host controller of Tegra can support Bayer Raw8 and Raw 10 data
input, it also output data as extended 16-bit data format in memory
directly.
Raw data output should be handled by the second output channel.
This patch add supporting for Raw data input/output and the second
output channel.
All were tested on Cardhu board.
Change-Id: Ifd1d8c94671a1d4571dcf176774e2d3cffafc399
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200225
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Change-Id: Ie685ad11a0847be5b51c752ec593aec857e2f0e2
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200224
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
OV5650 is a RAW sensor outputing Bayer RAW 8 or RAW 10 data.
This driver uses SoC camera interface and supports several
different resolution.
Change-Id: I8075b63b42f7949a264bdef446f5ed8bdc0a9eee
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200223
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
The VI client within drivers/video/tegra is mutually exclusive with the
Tegra V4L2 framework, since they both want to own the camera hardware.
Change-Id: Idebd0f619f5fc7eb6323b2e08c29c9692c8887a0
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200221
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Make it accessible outside of drivers/video/tegra. V4L2 driver needs
to set some platform_data.
Add suport for T20.
Change-Id: I98353c2874ea28cfa0a7a5dd8a1dc4c586af4dd7
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/200220
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Add battery regulator which is always-on. The rail which is
powered from battery can be added on this rail as consumer.
bug 1218527
Change-Id: I2394e1894649cd4fa736646981374681f603c832
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/#change,193052
(cherry picked from commit 4b9cabe87060bf5f252206aba5b62ea1ccb2ff83)
Reviewed-on: http://git-master/r/193777
Tested-by: Preetham Chandru <pchandru@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
enable /dev mount with ACL
Bug 1225372
Bug 1219372
Change-Id: I3b80012e97c3a5ec8358285f81c5111a30ed19f8
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/196206
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
set is_int_enable to true only if we register for a irq.
Bug 1211260
Change-Id: I603efe721796db70d504da7999e5d7939d45d13a
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Reviewed-on: http://git-master/r/193047
(cherry picked from commit 8b89b2b64c67d80fcfc29cd4f6a92d4527e70df9)
Reviewed-on: http://git-master/r/195844
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Add support for PM315
Bug 1217569
Change-Id: I230fcec04eb5a96441e2c19b304d608d86eaf996
Signed-off-by: Bibek Basu <bbasu@nvidia.com>
Reviewed-on: http://git-master/r/191555
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Registration of PWRON key through PMU interrupt
Bug 1218247
Change-Id: I4d5d4a404fff28f2e34b1fd4af5712796eb8806c
Signed-off-by: Ramalingam C <ramalingamc@nvidia.com>
Reviewed-on: http://git-master/r/191574
Reviewed-by: Preetham Chandru <pchandru@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Peer Chen <pchen@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Changing the condition for vbus check. VBUS will be
present when OTG cable is connected, hence vbus
status will be reflected wrong. Correct status
is tracked through vbus_active variable.
Bug 1158853
Bug 1214802
Change-Id: Ic904beb5919ddafef5becf39ddac1767cdda79cd
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/145148
(cherry picked from commit 00777683b05af76f15daa0152fb014183a32fa28)
Reviewed-on: http://git-master/r/190673
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Preetham Chandru <pchandru@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Function pointer int (*queue_setup)() of struct vb2_ops in
include/media/videobuf2-core.h is not compatible with our function
call tegra_camera_videobuf_setup(). So building will generate warning
and it will cause alloc_ctxs[] with wrong value, then introduce
memory access oops later.
Bug 1215617
Change-Id: I5d49ccd611a9435a5ee3b21e344bc0b5464ba747
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/190036
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Use 1x1 as the minimum window size.
Bug 1193195
Change-Id: I42e13fec82bbc2dc37bde6416088f3ae49b304b7
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/173302
(cherry picked from commit 3f160560b48fdf501547b9fc1f7c5bf8bd5e32af)
Reviewed-on: http://git-master/r/190810
Reviewed-by: Eric Brower <ebrower@nvidia.com>
Tested-by: Eric Brower <ebrower@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
initialize SSID variable properly to ensure
no memory overrun.
Bug 1204024
Change-Id: I2485c13edcf6a0feeae3cd4b2e9e98910a771dd2
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/190684
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
|
|
Videobuf2-dma-nvmap driver using by Tegra v4l2 camera driver needs to
allocation memory from system memory with nvmap_alloc(). If we don't
enable config option CONFIG_NVMAP_ALLOW_SYSMEM, nvmap_alloc() will
fail and application stops working.
Bug 1215629
Change-Id: I40af697d8aee1a4981a9684953107dd070cc9bea
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/190037
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
do not allow scheduling hang thread after cleanup
is done.
Bug 1210849
Bug 1205910
Bug 1163014
Change-Id: Idc5f9fd6a3d210843f1168e57ceef107599d5789
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/189721
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
when platform device is unregistered, the call to platform_device_release()
will kfree the platform data. Hence do not free the platform data again.
Bug 1209618
Change-Id: Ied67f550223ec199da4bc8e38a12e7ee94c2d98a
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Reviewed-on: http://git-master/r/187806
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
- Fix a bug in ahci-tegra.c when checking if SATA is on when resuming
- Add codes to support PM315 which uses LDO1 regulator for SATA rails
bug 1206518
Change-Id: Iaa910b1948fbcf5e45491977fd8ed0b313d2e0ae
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://git-master/r/188441
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Allen Martin <amartin@nvidia.com>
Reviewed-by: Peng Wu <pengw@nvidia.com>
Tested-by: Peng Wu <pengw@nvidia.com>
Reviewed-by: Eric Brower <ebrower@nvidia.com>
|
|
Fix manual rebase error
Change-Id: I3b2165488b11bddda271cecdc979341c130def9b
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Reviewed-on: http://git-master/r/173554
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Send change all vc's notification from HDMI hot-plug reader to
fbcon, so that the new selected mode can be applied on all the
vc's from vc1 to vc6. This sometimes causes corruption on HDMI
hot plugin, when fbcon is mapped to HDMI
Bug 1166008
Signed-off-by: Shashank Sharma <shashanks@nvidia.com>
Change-Id: Id173de3014597f79c8c8b31bbbee7c9c560547b6
Reviewed-on: http://git-master/r/168683
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Tested-by: Matthew Pedro <mapedro@nvidia.com>
|
|
When porting change from mainline to balance dc irq, the change
of enable/disable order was not ported, thus dc irq is disabled
if dc is enabled during probe.
This is part of http://git-master/r/146107.
Original change is big for many bugs, only port one here.
bug 1173177
bug 1173038
bug 1008313
Change-Id: Idd703daca9f980e905b185eeeae19dc6309d76e5
Signed-off-by: Dongfang Shi <dshi@nvidia.com>
Reviewed-on: http://git-master/r/162868
(cherry picked from commit 6ddd8b02f7a17d2269290d06159c20860ffb92e9)
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/173249
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Unconditionally update line_length using disply width to avoid discrepancy
between line_length and actual display width.
bug 1186388
Change-Id: I8ef2f9cf76a61764c2121f3c2c013b72b830ce2e
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/170664
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Do not use P2P, as it does not fit well with
network manager.
Bug 1199933
Change-Id: I355515574baabeace7c48932c52007c1fe0c3d5f
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/171551
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Tested-by: Matthew Pedro <mapedro@nvidia.com>
|
|
- select RT5640 ASoC support in Cardhu machine Kconfig
- enable RT5640 ASoC driver in tegra3_defconfig
- select RT5639 ASoC codec when selecting RT5640, othwise kernel
linking will fail
Bug 1190823
Change-Id: I1046c30667d4ca8276080f1b3174eccd0b25328c
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/168884
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Clear framebuffer2 if and only if framebuffer2 is not specified by the
bootloader. If the bootloader framebuffer2 is specified, then copy the
contents to kernel framebuffer2.
bug 1175957
Change-Id: I4ac4432c1dac6a6c634ab3e6ae31628f9c64ddb4
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/170663
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Parse and handle fbmem2 cmdline parameter.
bug 1175957
Change-Id: I0933825371bf13782e9f4364a4dba078929ae836
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/170662
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Add tegra_clear_framebuffer function.
bug 1175957
Change-Id: I12c249e011ecd839bbe9c5371b8be6e8a4b27bba
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/170661
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Based on ov5642 driver. There seem to be some register differences,
so forking the driver to make those changes.
Change-Id: Idb4a79757cbbcd15d5456ce82a708f433faaff7a
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/169836
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Change-Id: Ic4d91f4ed70fc3daf52768118f6ea537d529a5a8
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/169835
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Add this function, to be able to set the global field of an
nvmap_handle while preserving the nvmap API's encapsulation
mechanisms.
Change-Id: I62de773a65119722f059b114e2d0e906c7e04e83
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/169834
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Add a companion function to nvhost_client_device_get_resources()
called nvhost_client_device_put_resources() that does the opposite
thing. This is useful for any nvhost clients that need to be loaded
as modules, since the driver removal path will be exercised in that
case.
Change-Id: Ib5cec6fce7b05c780b135b03fcd88e068f772244
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/169833
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
This is based off of videobuf2-dma-contig, except we use Tegra's
nvmap for the buffer allocations.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Change-Id: I15e689c33ee7b4fc0aade794c78701c82483df3f
Reviewed-on: http://git-master/r/145345
(cherry picked from commit 70a4f20fbdd6c2c719400d6c59ef58d845657031)
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Change-Id: Ia0632d7fcb28415e33fbb22c48f29117d7436f1d
Reviewed-on: http://git-master/r/170824
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Andrew Chew <achew@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
This is the Tegra V4L2 camera host driver, for Tegra2/Tegra3's VI/CSI
controller.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Change-Id: If2d9eefe53c2119c1a6ae518216e1a3c3ed216ef
Reviewed-on: http://git-master/r/145346
(cherry picked from commit 5a9bfd588b755f354ae21471a3a2a3e559ca6fae)
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Change-Id: I4db33b17efdb401938603cb2153d73bf3421ba61
Reviewed-on: http://git-master/r/170823
Reviewed-by: Andrew Chew <achew@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
This readme describes theory of operations of the Tegra camera host
driver.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Change-Id: I9e6f761cd60f5b8a537174290df21fb85f016dca
Reviewed-on: http://git-master/r/145347
(cherry picked from commit 7dd02775470d2b243f96b7d1f4e8b9c4e3b3ada6)
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Change-Id: I10fd56ea6e3e83db6e09b75126a2048552ef052c
Reviewed-on: http://git-master/r/170822
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
LD vmlinux.o
drivers/built-in.o: In function `is_tegra_camera_on':
/home/roc/Work/bug_vip/source_vibrante/kernel/include/media/
tegra_camera.h:59: multiple definition of `is_tegra_camera_on'
arch/arm/mach-tegra/built-in.o:/home/roc/Work/bug_vip/source_vibrante
/kernel/include/media/tegra_camera.h:59: first defined here
make: *** [vmlinux.o] Error 1
Commit '678708d WAR: gr3d: limit 3d clock when camera is on'
introduced a function is_tegra_camera_on(), which is dummy when
CONFIG_TEGRA_CAMERA is disabled. But it will be multiple defined
when includ this header file in multiple C files.
So marking it as static will kill this error.
Change-Id: I9dbcf1231f744c23e761d70da0bfc874fb286e4a
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Reviewed-on: http://git-master/r/167510
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
In open call we were assigning the driver's nvmap handle to
the nvavp's client context which would get released in release
call to driver. This will cause driver's nvmap handle to be
invalid if a parallel client context is running and driver does
any nvmap operation.
Bug 1013063
Bug 1192772
Change-Id: Id02520ae8ec511bb8c50bc4d3908ea3e75e1ea6b
Reviewed-on: http://git-master/r/170585
Signed-off-by: Gajanan Bhat <gbhat@nvidia.com>
Reviewed-on: http://git-master/r/171097
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Tested-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Winnie Hsu <whsu@nvidia.com>
|
|
Set wake enable only if remote wakeup is supported
by the platform
Bug 1039143
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Change-Id: I805dd773cdbb5639f59b2f5ba4bcb2e14be74d5b
Reviewed-on: http://git-master/r/147462
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Suresh Mangipudi <smangipudi@nvidia.com>
Reviewed-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
This misbracketing can potentially result in an invalid pointer dereference.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Change-Id: Iaed185dd2141f1aa332747eeba10d22b850caa37
Reviewed-on: http://git-master/r/168475
Reviewed-by: Peng Wu <pengw@nvidia.com>
Tested-by: Peng Wu <pengw@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Allen Martin <amartin@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
- enable couple of HID devices
- modify couple of BT options
Bug 1178960
Change-Id: Id9377edff2189d8a63f624d5d4e388e54658482f
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/167541
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
Tested-by: Matthew Pedro <mapedro@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
|
|
Commit 7c786ce33a1b4194cb95aa1e68bc38d552eda932
introduced couple of fields, which are not used
in standard bluez user space stack. However,
Android bluez use them. This CL, conditionally
builds the part of the code introduced in the
above commit.
Bug 1178960
Change-Id: I7254fe83c7fb4bbfd14e00dda3ec3a14afc1b234
Signed-off-by: Mursalin Akon <makon@nvidia.com>
(cherry picked from commit e3375fd96fa5e0d7cfcda848d797cd512c12b7a6)
Reviewed-on: http://git-master/r/167540
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Eric Brower <ebrower@nvidia.com>
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
required for bluetooth
Bug 1033671
Change-Id: Ibc45eaf344ef7a5eea88e7df5747f8dcdcbf202d
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/166347
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|
|
Enable CONFIG_SATA_AHCI_TEGRA
Bug 1171138
Change-Id: Id0cf3679a0fb0b85e20cd83c94135bf2aab2dd71
Original-author: Mike Thompson <mikthompson@nvidia.com>
Signed-off-by: Mike Thompson <mikthompson@nvidia.com>
Signed-off-by: Bibek Basu <bbasu@nvidia.com>
Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com>
Reviewed-on: http://git-master/r/143985
Tested-by: Simone Willett <swillett@nvidia.com>
(cherry picked from commit 6830e27f86e0f3a2f1e3bad51ee2bf6855dc99b7)
Signed-off-by: Bibek Basu <bbasu@nvidia.com>
Reviewed-on: http://git-master/r/166838
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
|