summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-07iwlagn: clean up some 3945/4965 remnantsJohannes Berg
When the driver was split, a bunch of definitions for the 3945 and 4965 devices stayed around, but they're now useless so remove (some of) them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove unused variableJohannes Berg
Some code was removed, but a variable it used and that is now unused stayed around, kill it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07rt2x00: Drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek <mmarek@suse.cz> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mwl8k: Do not configure tx power unconditionallyNishant Sarmukadam
Instead of configuring tx power unconditionally, check for IEEE80211_CONF_CHANGE_POWER and configure it only when stack sets this flag Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: configure beacons based on hw opmodeRajkumar Manoharan
Current ath9k code does not handle beacon timers on opmode specific. One such example is that a STA beacon config overwrites already configured AP vif's beacon timers during scan. On multi station vif case, configure beacon timers beased on primary vif selected. This also helps while moving back to single STA vif from multi STA vifs, where the power save is enabled and hw has to be reconfigured with proper beacon and bssid/aid. Otherwise connection poll will be triggered so frequently due to beacon loss. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Handle BSSID/AID for multiple interfacesRajkumar Manoharan
As of now bssid/aid is overridden with recently changed vif's bss config. This may cause improper beacon updation due to bssid/aid mismatch. On station mode, select an associated sta vif as primary vif and configure that vif's bss into hw. Update the primary vif on interface change and bss info change. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Cleanup ath_vif structRajkumar Manoharan
Remove unused bssid from ath_vif and set av_bslot on beacon alloc/return. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: deny new interface addtion on IBSS modeRajkumar Manoharan
The present check denies the IBSS interface addtion if we already have any other vifs. But it fails to deny interface addition if IBSS was already present. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07wl1251: Add support for idle modeJarkko Nikula
On Nokia N900 the wl1251 consumes the most power when the interface is up but not associated to access point (that supports PSM). In terms of battery current consumption, the consumption is ~180 mA higher when the interface is up but not associated and only ~5 mA higher when associated compared to interface down and driver not loaded cases. This patch adds support for the mac80211 idle notifications. Chip is put into idle very much the same way when entering into PSM by utilizing the Extreme Low Power (ELP) mode. I.e. idle is entered by setting necessary conditions in wl1251_ps_set_mode followed by a call to wl1251_ps_elp_sleep. It seems it is just enough the authorize ELP mode followed by CMD_DISCONNECT (thanks to Kalle Valo about the idea to use it). Without disconnect command the chip remains somewhat active and stays consuming ~20 mA. Idle mode is left by same way than PSM. The wl1251_join call is used to revert the CMD_DISCONNECT. Without it association to AP doesn't work when trying second time. With this patch the interface up but not associated case the battery current consumption is less than 1 mA higher compared to interface down case. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07wl1251: Prepare for idle mode supportJarkko Nikula
RFC for WL1251 idle mode support brought a few issues that are worth to update before adding the idle mode support. Since the idle mode can reuse the code that is now used in Power Save Mode (PSM), the flag psm in struct wl1251 is changed to variable station_mode to be able to distinguish between PSM and idle modes. As the station mode is different than the power power save mode command that is sent to chip, the enum wl1251_cmd_ps_mod values are used only when communicating with the chip and new enum wl1251_station_mode values are used inside the driver. Confusing comment about psm and elp relation is removed since the PSM is actually activated by putting the chip into Entreme Low Power (ELP) mode. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mac80211: remove few obsolete flagsMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07zd1211rw: rename CR* macros to ZD_CR*Jussi Kivilinna
With compat-wireless CR* macros in zd_usb.h conflict with CR macros in include/asm-generic/termbits.h. So rename CR* macros to ZD_CR*. Conversion was done with using sed and then 'over 80 character line' checkpatch.pl warnings and comment indents were fixed. Reported-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: use the hw opmode to select the beacon timer modeFelix Fietkau
Since the beacon timers are global, the individual vif type should not be used to determine the beacon timer configuration mode, use the global opmode instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: fix beacon slot processing in ad-hoc modeFelix Fietkau
The recent cleanups in the beacon code fixed SWBA backoff calculation, however it did not remove a line of code that worked around the issues from the earlier version of the code. After the cleanup, the initial TSF based slot calculation now always returns 0 instead of ATH_BCBUF-1, so the previous hack that reversed the slot order needs to be removed, as ad-hoc mode does not use staggered beacons. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mwifiex: remove redundant encryption_mode mappingYogesh Ashok Powar
remove MWIFIEX_ENCRYPTION_MODE_ and use WLAN_CIPHER_SUITE_ macros directly Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mwifiex: return success in set_default_key for WPA/WPA2Amitkumar Karwar
When testing wpa_supplicant with 'nl80211' driver to connect to an AP with WPA/WPA2 security, we notice the followings: 1) add_key is called firstly with the key from cfg80211 2) set_defaut_key is called next set_default_key() is specific to WEP keys and should not be called in case of WPA/WPA2 security. The set_default_key() won't be called if wpa_supplicant uses "-Dwext" option, but it's been called if "-Dnl80211" option is specified. We can fix this issue by adding a check to return from set_default_key() if WEP key is not configured. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07nl80211: Add BSS parameters to stationPaul Stewart
This allows user-space monitoring of BSS parameters for the associated station. This is useful for debugging and verifying that the paramaters are as expected. [Exactly the same as before but bundled into a single message] Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlwifi: remove sync_cmd_mutexStanislaw Gruszka
We now use priv->mutex to serialize sync command, remove old priv->sync_cmd_mutex and add assertion that priv->mutex must be locked. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlwifi: more priv->mutex serializationStanislaw Gruszka
Check status bits with mutex taken, because when we wait for mutex unlock, status can change. Patch should also make remaining sync commands be send with priv->mutex taken. That will prevent execute these commands when we are currently reset firmware, what could possibly cause troubles. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlwifi: fix enqueue hcmd race conditionsStanislaw Gruszka
We mark command as huge by using meta->flags from other (non huge) command, but flags can be possibly overridden, when non huge command is enqueued, what can lead to: WARNING: at lib/dma-debug.c:696 dma_debug_device_change+0x1a3/0x1f0() DMA-API: device driver has pending DMA allocations while released from device [count=1] To fix introduce additional CMD_MAPPED to mark command as mapped and serialize iwl_enqueue_hcmd() with iwl_tx_cmd_complete() using hcmd_lock. Serialization will also fix possible race conditions, because q->read_ptr, q->write_ptr are modified/used in parallel. On the way fix whitespace. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07wireless: rt2x00: rt{2500,73}usb.c fix duplicate idsXose Vazquez Perez
based on the Ralink drivers: W = Windows_ralink_driver L = Linux_ralink_driver USB_IDs W_73 W_2500 L_73 L_2500 ============= ==== ====== ==== ====== 0x050d,0x7050 - - - YES 0x050d,0x705a - - YES - 0x1371,0x9022 - YES YES - 0x148f,0x2573 YES - YES - Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-04-07ar9170usb: purge obsolete driverChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05Bluetooth: convert net/bluetooth/ to kstrtoxAlexey Dobriyan
Convert from strict_strto*() interfaces to kstrto*() interfaces. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use GFP_KERNEL in user contextGustavo F. Padovan
The allocation in mgmt_control() code are in user context and not locked by any spinlock, so it's not recommended the use of GFP_ATOMIC there. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Don't use spin_lock_bh in user contextGustavo F. Padovan
spin_lock() and spin_unlock() are more apropiated for user context. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in cmtpSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in bnepSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-05Bluetooth: Use kthread API in hidpSzymon Janc
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Add mgmt_remote_name eventJohan Hedberg
This patch adds a new remote_name event to the Management interface which is sent every time the name of a remote device is resolved (over BR/EDR). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Add mgmt_device_found eventJohan Hedberg
This patch adds a device_found event to the Management interface. For now the event only maps to BR/EDR inquiry result HCI events, but in the future the plan is to also use it for the LE device discovery process. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04Bluetooth: Remove gfp_mask param from hci_reassembly()Gustavo F. Padovan
It is unnecessary, once we are always in interrupt context. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-04mac80211: clean up station cleanup timerJohannes Berg
We currently run this timer exactly once when a new mac80211 device is registered, but that is completely pointless since it will have no work to do at all. Therefore, remove that and also simplify some code using the timer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: implement serdes workaroundRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: implement mdio readingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: fix mdio writes on newer cores (rev 10+)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: trivial: drop useless pointerRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: trivial: use u8 for chip_rev (it's mask is 0xF)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ath9k_hw: Use appropriate rx gain table for AR9485Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove unused macros in decl.h and main.hBing Zhao
These macros are leftover of previous cleanup patches. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove struct mwifiex_802_11_fixed_iesBing Zhao
struct mwifiex_802_11_fixed_ies is not necessary. struct mwifiex_event_wep_icv_err is not used any more. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: cleanup power save related struct and macrosMarc Yang
remove redundant structures and unused macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ieee80211: add HT extended capabilities masksBing Zhao
IEEE Std 802.11n, Oct. 29, 2009: 7.3.2.56.5 HT Extended Capabilities field Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove unused macros in fw.hMarc Yang
These definitions are no longer used after previous cleanups. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove unused radio_on variable and macrosMarc Yang
The radio_on variable is defined but never used. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove MWIFIEX_AUTH_MODE_ macrosMarc Yang
replace them with NL80211_AUTHTYPE_ macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove MWIFIEX_BSS_MODE_ macrosBing Zhao
replace them with NL80211_IFTYPE_ macros Also remove redundant functions mwifiex_drv_get_mode() and mwifiex_bss_ioctl_mode(). Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04rt2x00: Add an error message when trying to send on a full queueHelmut Schaa
We already tell mac80211 to stop the queue when we hit a certain threshold. Hence, it shouldn't happen at all that a frame gets queued for tx on a full queue. Add an error message for this case. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04rt2x00: Fix tx aggregation problems with some clientsHelmut Schaa
Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients rt2x00 should send a BlockAckReq if the transmission of an AMPDU subframe fails. Introduce a new flag TXDONE_AMPDU to indicate that this is an AMPDU subframe and pass IEEE80211_TX_STAT_AMPDU_NO_BACK to mac80211 if an AMPDU subframe failed during transmission. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04rt2x00: Add support for the ZyXEL NWD-211AN USBIvo van Doorn
Add new USB ID Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 10:54:54 +0000