summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-17ASoC: Add device table to SH FSI driverDzianis Kahanovich
Signed-off-by: Dzianis Kahanovich <mahatma@eu.by> [Modified to move the location of the table] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-16ASoC: da7210: code clean upKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-16ASoC: ak4642: code clean upKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-16ASoC: Add platform listing to debugfsMark Brown
List registered platforms in debugfs to improve debugability of machine drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-16ASoC: Add DAI list to debugfsMark Brown
Allow the user to inspect the list of registered DAIs at runtime to improve diagnostics for machine driver setup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-16ASoC: Add debugfs listing of registered CODECsMark Brown
Help with diagnostics for machine driver setup by listing all the registered CODECs in debugfs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15ASoC: WM8985: Initial driverDimitris Papastamos
The WM8985 is a low power, high quality, feature-rich stereo CODEC designed for portable multimedia applications that require low power consumption and high quality audio. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-15ASoC: tlv320aic3x: Complete the soc-cache conversionJarkko Nikula
Complete the phasing out of aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls. This patch uses in aic3x_read the codec->hw_read that points to a function implemented by soc-cache. Only use for aic3x_read is if wanting to read volatile bits from those registers that has both read-only and read/write bits. All other cases should use snd_soc_read. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15ASoC: tlv320aic3x: Switch to soc-cache helpersJarkko Nikula
Continue phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls. This patch takes the soc-cache in use and removes aic3x_read_reg_cache and aic3x_write. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15ASoC: tlv320aic3x: Use snd_soc_read and snd_soc_writeJarkko Nikula
Start phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls in order to switch to soc-cache helpers. This patch replaces aic3x_read_reg_cache and aic3x_write with snd_soc_read and snd_soc_write. This is basically null-op since .read and .write in soc_codec_dev_aic3x points to aic3x_read_reg_cache and aic3x_write. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15ASoC: Change my mail addressArnaud Patard (Rtp)
Like other coworkers, I'm about leave Mandriva/Edge-It so I'm changing my mail address to use my personal one. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-15ASoC: Remove needless codec->bias_level assignment to SND_SOC_BIAS_OFFJarkko Nikula
This assignment is done by the snd_soc_register_codec so there is no need to redo it in probe function of a codec driver. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-14ASoC: Samsung: Debug PCM snd_soc_dai_driver registrationJassi Brar
Each of the two PCM controllers need to be registered during probe with appropriate 'name' of the dai driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-14ASoC: Set more meaningful name for SMDK64xx WM8580 audioMark Brown
Since the SMDK64xx boards have two audio subsystems using the board name as the card name by itself isn't so user friendly as it might be. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-14ASoC: fsi codecs: Update card name fieldKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: S3C: Fix PCM TXFIFO_DIPSTICK valueSeungwhan Youn
This patch modify FIFO_DIPSTICK value of PCM TX FIFO to be a optimal one. Privious value (0x20) did not support 'Almost_full' of PCM FIFO for the DMA request. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: S3C: Fix PCM RX FIFO settingsSeungwhan Youn
When PCM capture, sound recorded abnormally because of RX FIFO threshold settings are missing. So, This patch modify PCM RX FIFO setting codes same as TX. And for DMA, if PCM RXFIFO_DIPSTICK is not '0', it doesn't effect to DMA request, because DMA refer RX_FIFO_EMPTY flag as the DMA request. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: Fix off-by-one bug in WM8962 register cache size configurationDimitris Papastamos
This is a simple off-by-one bug, the size of the register cache is incorrectly set to the maximum register index. Fix it by adding one. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: WL1273 FM Radio: Eliminate unnecessary error return value.Matti J. Aaltonen
With this change it's not a error to call wl1273_set_audio_route when the codec is active if the new routing value is the same as the current active setting. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-11ASoC: tlv320aic3x: Optimize PLL programming in aic3x_set_bias_levelJarkko Nikula
There is only need to enable/disable once the PLL when the bias is going between on, prepare, standby and off states. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-10ASoC: Fix incorrect register cache size configurationDimitris Papastamos
The reg_cache_size is the number of elements in the register cache, not the size of the cache itself. This is not a problem if the size of each element of the cache is 1 byte but it matters in any other case. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: ad1980 - set reg_cache_default to ad1980_regAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10fbdev: sh_mobile_hdmi: Add select SND_SOC to KconfigKuninori Morimoto
This patch solve compile error when .config doesn't have CONFIG_SND_SOC which is needed for HDMI sound. It was reported by Guennadi as follows Besides, I think, this will not link without CONFIG_SND_SOC. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi-hdmi: remove unneeded headerKuninori Morimoto
This patch solve below report from Guennadi. But I didn't remove #include <sound/sh_fsi.h>. Because it have FSI_PORT_B define which is used on this file. > +#include <linux/platform_device.h> > +#include <sound/sh_fsi.h> > +#include <video/sh_mobile_hdmi.h> Now that everything is done with strings - do you still need these headers? Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10fbdev: sh_mobile_hdmi: add new label for sound error pathKuninori Morimoto
This patch solve below report from Guennadi > /* External video parameter settings */ > static void hdmi_external_video_param(struct sh_hdmi *hdmi) > { > @@ -804,6 +862,11 @@ static int __init sh_hdmi_probe(struct platform_device *pdev) > return -ENOMEM; > } > > + ret = snd_soc_register_codec(&pdev->dev, > + &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1); > + if (ret < 0) > + goto egetclk; > + > hdmi->dev = &pdev->dev; > > hdmi->hdmi_clk = clk_get(&pdev->dev, "ick"); NAK. This breaks the error path and has to be fixed. Firstly, please, use a new label like "esndreg," secondly, you have to add clk_disable(hdmi->hdmi_clk); erate: clk_put(hdmi->hdmi_clk); egetclk: + snd_soc_unregister_codec(&pdev->dev); +esndreg: mutex_destroy(&hdmi->mutex); kfree(hdmi); Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10fbdev: sh_mobile_hdmi: modify snd_soc_dai_driver settingsKuninori Morimoto
This patch solve below report from Guennadi > +static struct snd_soc_dai_driver sh_hdmi_dai = { > + .name = "sh_mobile_hdmi-hifi", > + .playback = { > + .stream_name = "Playback", > + .channels_min = 1, Can it actually do mono? Maybe at probe time you could look at audio flags from your previous patch and, e.g., for SPDIF set channels_min to 2? > + .channels_max = 2, That's the "smallest max," yes. With some other interfaces (I2S, DSD) it can support up to 8 channels... > + .rates = SNDRV_PCM_RATE_8000_48000, Hm, in the datasheet I see supported frequencies 32kHz to 192kHz. And if you promise support for multiple frequencies, don't you want to implement .hw_params? Besides, not all of these frequencies will be available, depending on your supplied clock and your willingness to implement downsampling. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10fbdev: sh_mobile_hdmi: modify flags name to more specificKuninori Morimoto
This patch solve below report from Guennadi 1) > +/* Audio source select */ > +#define HDMI_SRC_MASK (0xF << 0) > +#define HDMI_SRC_I2S (0 << 0) /* default */ > +#define HDMI_SRC_SPDIF (1 << 0) > +#define HDMI_SRC_DSD (2 << 0) > +#define HDMI_SRC_HBR (3 << 0) I would be more specific with these macro names, i.e., include "AUDIO" or "SND" or something similar in them, e.g., HDMI_AUDIO_SRC_I2S. 2) > + case HDMI_SRC_I2S: > + data = (0x0 << 3); > + break; > + case HDMI_SRC_SPDIF: > + data = (0x1 << 3); > + break; > + case HDMI_SRC_DSD: > + data = (0x2 << 3); > + break; > + case HDMI_SRC_HBR: > + data = (0x3 << 3); In all above cases parenthesis are superfluous. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10fbdev: sh_mobile_hdmi: modify noisy comment outKuninori Morimoto
This patch solve below report from Guennadi 1) > - hdmi_write(hdmi, 0x00, HDMI_AUDIO_SETTING_1); > + switch (pdata->flags & HDMI_SRC_MASK) { > + default: > + /* FALL THROUGH */ I'm not sure I like the capitalisation here - no reason to shout;) 2) > +/************************************************************************ > + > + > + HDMI sound > + > + > +************************************************************************/ I don't think this comment deserves 7 lines of text, besides breaking the multiline comment style. If you think, one line like /* HDMI sound */ is not enough how about just /* * HDMI sound */ 3) > +/************************************************************************ > + > + > + HDMI video > + > + > +************************************************************************/ See above - 7 lines seem to be an overkill to me. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: Samsung: Debug PCM platform device nameJassi Brar
The PCM controller platform devices are registered by the name 'samsung-pcm', so use the same in the CPU driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: S3C: AC97: Remove the -dai suffixJassi Brar
Drop the invalid -dai suffix appended to the Samsung AC97 CPU DAI. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi codecs: modify menu attribute on KconfigKuninori Morimoto
Current SND_FSI_xxx menu attributes were bool, but it should be tristate. This patch solve below report from Guennadi "bool" means, if someone is linking the whole ASoC into the kernel, they will not be able to build this as a module. Not a big deal, but you're stealing some freedom from the user. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi-ak4642: modify platform_nameKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laim Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08OMAP: McBSP: Fix static function warningG, Manjunath Kondaiah
This patch fixes sparse warning due non declaration of static function sound/soc/omap/omap-mcbsp.c:783:5: warning: symbol 'omap_mcbsp_st_info_volsw' was not declared. Should it be static? Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Cc: alsa-devel@alsa-project.org Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-08ASoC: rx1950: Fix clkdiv for 16khz and 48khzVasily Khoruzhick
Usage of 256 as clkdiv gives better rounding error (<1%) for 16khz and 48khz Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: UDA1380: Add delay between power on and resetVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: rx1950: remove unnecessary headersVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: rx1950: check that machine is rx1950 in glue driverVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-07ASoC: Remove export of CS4270 DAIMark Brown
Not needed with multi-component. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06ASoC: Staticise WM9712 DAI listMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06ASoC: Fix cut'n'paste comment in WM8994Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06Merge branch 'for-2.6.37' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-09-06ASoC: wm8753, remove dead codeJiri Slaby
There is adangling code in wm8753_probe which is never executed. Remove it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-06ASoC: tlv320aic3x: Fix null pointer dereference when pdata is not setJarkko Nikula
Null pointer dereference will occur from *setup = pdata->setup if pdata is not set. Fix this by moving assignments from pdata inside non-null case. Thanks to Jiri Slaby <jirislaby@gmail.com> for noticing. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06ASoC: Add event variants of the AIF widgetsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-03ASoC: ak4642: Revive ak4642_snd_controlsKuninori Morimoto
This patch revive ak4642_snd_controls which was removed on f0fba2ad1b6b53d5360125c41953b7afcd6deff0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-02ASoC: pl022_ds.c: Add of_node_put to avoid memory leakJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_parse_phandle. This patch also moves the existing call to of_node_put tothe end of the error handling code, to make it possible to jump to of_node_put without doing the other cleanup operations. These appear to be disjoint operations, so the ordering doesn't matter. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.uo.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-02ASoC: kirkwood: add alias to pcm moduleArnaud Patard (Rtp)
Allow snd-soc-kirkwood autoloading by adding an alias. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-01ASoC: Added a missing 32-bit PCM format, to the wm8994 codec.Ian Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-01ASoC: Implement WM8994 DAC data source muxesMark Brown
Allow selection of the channel used for input to the AIFnDAC signals. This isn't integrated into DAPM since we treat the data as a single mono channel until just beyond this selection so it ends up having no visible effect on the routing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01ASoC: Add sh_mobile_hdmi sound supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-14 02:26:26 +0000