summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-26iwlagn: add bt config structure support for 2000 seriesWey-Yi Guy
2000 series has different bt config command structure, add support for it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlagn: name change for BT config commandWey-Yi Guy
No functional changes, name changes to reflect the structure used by 6000 series. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-25iwlegacy: change some symbols duplicated from iwlwifi directoryJohn W. Linville
drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x29f0): multiple definition of `iwl_rates' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0xa68): first defined here powerpc64-linux-ld: Warning: size of symbol `iwl_rates' changed from 143 in drivers/net/wireless/iwlwifi/built-in.o to 130 in drivers/net/wireless/iwlegacy/built-in.o drivers/net/wireless/iwlegacy/built-in.o:(.data+0x0): multiple definition of `bt_coex_active' drivers/net/wireless/iwlwifi/built-in.o:(.data+0x668): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x750): multiple definition of `iwl_eeprom_band_1' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x27d0): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x3f0): multiple definition of `iwl_bcast_addr' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x24f8): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.bss+0x3d48): multiple definition of `iwl_debug_level' drivers/net/wireless/iwlwifi/built-in.o:(.bss+0x21950): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: support direct offchannel TX offloadJohannes Berg
For devices supported by iwlwifi sometimes off-channel transmissions need to be handled by the device completely. To support this mac80211 needs to pass the frame directly to the driver and not through the TX path as the driver needs the frame and channel information at the same time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: better fix for conn_mon_timer running after disassociateStanislaw Gruszka
Is still possible to schedule conn_mon_timer after disassociate from ieee80211_sta_tx_notify() and ieee80211_offchannel_ps_disable(). Move disassociate check to ieee80211_sta_reset_conn_monitor() to cover all these cases, and add unlikely since in most the time we call ieee80211_sta_reset_conn_monitor() when associated. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: Fix compilation warning.Vivek Natarajan
Initialize txq to avoid this warning: drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_flush’: drivers/net/wireless/ath/ath9k/main.c:2138: warning: ‘txq’ may be used uninitialized in this function Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: Cancel pll_work while disabling radio.Vivek Natarajan
pll_work should be cancelled on full_sleep or it may cause redundant chip reset. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k_hw: Fix pcie_serdes setting for AR9485 1.1 version.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25b43: fill PHY ctl word1 in TX header for N-PHYRafał Miłecki
This patch fixes tramissing on OFDM rates for PHYs 1 and 2. There is still something wrong with PHYs 3+. Tests has shown decreasing of performance on CCK rates by 1-2%, we have to live with that. Additionaly this noticeably reduces amount of PHY errors. They were mostly produced by auto-switching to higher rate for better performanced, which resulted in no transmit at all and PHY errors. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25iwlagn: fix iwlagn_check_needed_chainsJohannes Berg
This function was intended to calculate the number of RX chains needed, but could only work where the AP's streams were asymmetric, i.e. 2 TX and 3 RX or similar. In the case where IEEE80211_HT_MCS_TX_RX_DIFF was not set, this function would calculate the wrong information. Additionally, mac80211 didn't pass through the required values at all, so it couldn't work anyway. Rewrite the logic in this function and add appropriate comments to make it readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: copy peer MCS TX parametersJohannes Berg
We need to copy this to allow drivers to look at the information where needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25orinoco: Drop scan results with unknown channelsJoe Gunn
If the frequency can not be mapped to a channel structure log it and drop it. Signed-off-by: Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: remove IBSS merge delayJohannes Berg
This reverts 4a332a38 ("mac80211: Give it some time to do the TSF sync"). There's no point in waiting with a new IBSS merge just because the hardware hasn't merged up with the old IBSS yet, and since 34e8f082 we no longer attempt to merge with the IBSS we're already in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: make tx() operation return voidJohannes Berg
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25iwlegacy: do not set tx power when channel is changingStanislaw Gruszka
Same fix as f844a709a7d8f8be61a571afc31dfaca9e779621 "iwlwifi: do not set tx power when channel is changing". Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25p54: implement set_coverage_classChristian Lamparter
The callback sets slot time as specified in IEEE 802.11-2007 section 17.3.8.6 and raises round trip delay accordingly. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtl8192c: fix compilation errorsJohannes Berg
On my G5 this fails to compile with drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict since you can't export static functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: rtl8192ce: rtl8192cu: Fix multiple def errors for allyesconfig buildLarry Finger
As noted by Stephan Rothwell, an allyesconfig build fails since rtl8192cu was merged with failures such as: drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_phy_sw_chnl': (.opd+0xf30): multiple definition of `rtl92c_phy_sw_chnl' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0xb70): first defined here drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_fill_h2c_cmd': (.opd+0x288): multiple definition of `rtl92c_fill_h2c_cmd' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0x288): first defined here These are caused because the code shared between rtl8192ce and rtl8192cu is included in both drivers. This has been fixed by creating a new modue that contains the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Eliminate udelay calls with too large valuesWilly Tarreau
On ARM, compilation of rtlwifi/efuse.c fails with the message: ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! On inspection, the faulty calls are in routine efuse_reset_loader(), a routine that is never used, and the faulty routine is deleted. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Let rtlwifi build when PCI is not enabledWilly Tarreau
On systems where PCI does not exist, a build of rtlwifi will fail. Apply the same fix in case there are systems with PCI but not USB. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtl8192cu: fix build error (vmalloc/vfree undefined)Willy Tarreau
On the ARM system, a build fails due to missing include. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Fix build when RTL8192CU is selected, but RTL8192CE is notWilly Tarreau
The wireless Makefile does not build rtlwifi for rtl8192cu unless rtl8192ce is selected. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: rename RX_FLAG_TSFTJohannes Berg
The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: Fix a race on enabling power save.Vivek Natarajan
There is a race on sending a data frame before the tx completion of nullfunc frame for enabling power save. As the data quickly follows the nullfunc frame, the AP thinks that the station is out of power save and continues to send the frames. Whereas in the station, the nullfunc ack will be processed after the tx completion of data frame and mac80211 goes to powersave. Thus the power save state mismatch between the station and the AP causes some data loss and some applications fail because of that. This patch fixes this issue. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: rev1: restore PHY state after RSSI operationsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: rev1: enable some gain ctl workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: fix 0x2055 radio workaround conditionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix error path in URB allocationSujith Manoharan
ath9k_hif_usb_alloc_urbs() takes care of freeing all the allocated URBs for the various endpoints when an error occurs. Calling ath9k_hif_usb_dealloc_urbs() would cause a panic since the URBs have already been freed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add debug code to print endpoint mappingSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix RX filtersSujith Manoharan
Add ATH9K_RX_FILTER_UNCOMP_BA_BAR and ATH9K_RX_FILTER_PSPOLL when mac80211 requires it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix host RX initializationSujith Manoharan
There is no need to set the BSSID mask or opmode when initializing RX, they would be set correctly in the HW reset routine. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix TBTT calculation for IBSS modeSujith Manoharan
The target beacon transmission time has to be synced with the HW TSF when configuring beacon timers in Adhoc mode. Failing to do this would cause erroneous beacon transmission, for example, on completion of a scan run to check for IBSS merges. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Configure beacon timers in AP modeSujith Manoharan
Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add ANI for AP modeSujith Manoharan
The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Calculate and set the HW opmodeSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Allow AP interface to be createdSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Maintain individual counters for interfacesSujith Manoharan
This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Protect ampdu_action with a mutexSujith Manoharan
This is required when issuing commands to the firmware. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Use VIF from the packet's control dataSujith Manoharan
There is no need to use a locally stored reference. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Make sequence number calculation per-VIFSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Set the BSSID mask for multiple interfacesSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_ASSOCIATED variableSujith Manoharan
mac80211 stores the association state in ieee80211_bss_conf. Use this and remove the local state, which is incorrect anyway since it is stored globally and not on a per-VIF basis. Restarting ANI and reconfiguration of HW beacon timers when a scan run ends requires more work. This is handled by iterating over the active interfaces. Finally, remove the useless check for associated status in RX processing. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_PROTECT_ENABLESujith Manoharan
CTS protection can be obtained from mac80211 directly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_PREAMBLE_SHORTSujith Manoharan
mac80211's BSS info can be used for this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix error handling in add_interfaceSujith Manoharan
Addition of a station might fail - handle this error properly by removing the VAP on the target. Also, bail out immediately if the max. no of interfaces has been reached. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Unify target capability updatingSujith Manoharan
Update capabilites on the target once, when start() is called, there is no need for redundant updating on adding an interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Allow upto two simultaneous interfacesSujith Manoharan
Multiple interfaces can be configured if a slot is free on the target. Monitor mode also requires a slot. The maximum number of stations that can be handled in the firmware is 8, manage the station slots accordingly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Handle storage devicesSujith Manoharan
Some AR7010 based devices are recognized as storage media. Sending a CD-EJECT command to the device will 'convert' it into a WLAN device. Do this within the driver itself, removing the dependancy on an external program (usb_modeswitch). Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mwl8k: Invert tx queues for set_hw_spec and set_edca_paramsNishant Sarmukadam
mac80211 and mwl8k FW tx queue priorities map inversely to each other. Fix this. Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Tested-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mwl8k: Tell mac80211 we have rate adaptation in FWNishant Sarmukadam
All mwl8k parts perform rate control in firmware. Make this known to mac80211 so that it does not launch minstrel. Also, because actual tx rate information is not available from the firmware, invalidate the rate status before returning the skb to mac80211. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-01 07:31:08 +0000