summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-24wil6210: fix temperature debugfsDedy Lansky
[ Upstream commit 6d9eb7ebae3d7e951bc0999235ae7028eb4cae4f ] For negative temperatures, "temp" debugfs is showing wrong values. Use signed types so proper calculations is done for sub zero temperatures. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24wil6210: increase firmware ready timeoutHamad Kadmany
[ Upstream commit 6ccae584014ef7074359eb4151086beef66ecfa9 ] Firmware ready event may take longer than current timeout in some scenarios, for example with multiple RFs connected where each requires an initial calibration. Increase the timeout to support these scenarios. Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24Revert "gpio: set up initial state from .get_direction()"Timur Tabi
[ Upstream commit 1ca2a92b2a99323f666f1b669b7484df4bda05e4 ] This reverts commit 72d3200061776264941be1b5a9bb8e926b3b30a5. We cannot blindly query the direction of all GPIOs when the pins are first registered. The get_direction callback normally triggers a read/write to hardware, but we shouldn't be touching the hardware for an individual GPIO until after it's been properly claimed. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problemJoe Moriarty
commit 22a07038c0eaf4d1315a493ce66dcd255accba19 upstream. The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_dp_mst_topology.c The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt() could result in a NULL pointer being returned to port->mstb due to a failure to allocate memory for port->mstb. Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-3-joe.moriarty@oracle.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24video: fbdev: sis: Remove unnecessary parentheses and commented codeNathan Chancellor
commit 864eb1afc60cb43e7df879b97f8ca0d719bbb735 upstream. Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/video/fbdev/sis/init301.c:851:42: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/video/fbdev/sis/init301.c:851:42: note: remove extraneous parentheses around the comparison to silence this warning } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~ ^ ~ drivers/video/fbdev/sis/init301.c:851:42: note: use '=' to turn this equality comparison into an assignment } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ^~ = 1 warning generated. Remove the parentheses and while we're at it, clean up the commented code, which has been here since the beginning of git history. Link: https://github.com/ClangBuiltLinux/linux/issues/118 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ALSA: hda: Don't release card at firmware loading errorTakashi Iwai
commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream. At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object. Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too. Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24scsi: sg: add sg_remove_request in sg_common_writeLi Bin
commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24tracing: Fix the race between registering 'snapshot' event trigger and ↵Xiao Yang
triggering 'snapshot' operation commit 0bbe7f719985efd9adb3454679ecef0984cb6800 upstream. Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24scsi: target: fix hang when multiple threads try to destroy the same iscsi ↵Maurizio Lombardi
session [ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman <mcoleman@datto.com> Tested-by: Matt Coleman <mcoleman@datto.com> Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24scsi: target: remove boilerplate codeMaurizio Lombardi
[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBDJim Mattson
commit 396d2e878f92ec108e4293f1c77ea3bc90b414ff upstream. The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 4.x: adjust indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24dm flakey: check for null arg_name in parse_features()Goldwyn Rodrigues
[ Upstream commit 7690e25302dc7d0cd42b349e746fe44b44a94f2b ] One can crash dm-flakey by specifying more feature arguments than the number of features supplied. Checking for null in arg_name avoids this. dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes" Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24ext4: do not zeroout extents beyond i_disksizeJan Kara
commit 801674f34ecfed033b062a0f217506b93c8d5e8a upstream. We do not want to create initialized extents beyond end of file because for e2fsck it is impossible to distinguish them from a case of corrupted file size / extent tree and so it complains like: Inode 12, i_size is 147456, should be 163840. Fix? no Code in ext4_ext_convert_to_initialized() and ext4_split_convert_extents() try to make sure it does not create initialized extents beyond inode size however they check against inode->i_size which is wrong. They should instead check against EXT4_I(inode)->i_disksize which is the current inode size on disk. That's what e2fsck is going to see in case of crash before all dirty data is written. This bug manifests as generic/456 test failure (with recent enough fstests where fsx got fixed to properly pass FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock mount option. CC: stable@vger.kernel.org Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size") Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen
commit 7ea862048317aa76d0f22334202779a25530980c upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24btrfs: check commit root generation in should_ignore_rootJosef Bacik
commit 4d4225fc228e46948486d8b8207955f0c031b92e upstream. Previously we would set the reloc root's last snapshot to transid - 1. However there was a problem with doing this, and we changed it to setting the last snapshot to the generation of the commit node of the fs root. This however broke should_ignore_root(). The assumption is that if we are in a generation newer than when the reloc root was created, then we would find the reloc root through normal backref lookups, and thus can ignore any fs roots we find with an old enough reloc root. Now that the last snapshot could be considerably further in the past than before, we'd end up incorrectly ignoring an fs root. Thus we'd find no nodes for the bytenr we were searching for, and we'd fail to relocate anything. We'd loop through the relocate code again and see that there were still used space in that block group, attempt to relocate those bytenr's again, fail in the same way, and just loop like this forever. This is tricky in that we have to not modify the fs root at all during this time, so we need to have a block group that has data in this fs root that is not shared by any other root, which is why this has been difficult to reproduce. Fixes: 054570a1dc94 ("Btrfs: fix relocation incorrectly dropping data references") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ALSA: usb-audio: Don't override ignore_ctl_error value from the mapTakashi Iwai
commit 3507245b82b4362dc9721cbc328644905a3efa22 upstream. The mapping table may contain also ignore_ctl_error flag for devices that are known to behave wild. Since this flag always writes the card's own ignore_ctl_error flag, it overrides the value already set by the module option, so it doesn't follow user's expectation. Let's fix the code not to clear the flag that has been set by user. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ASoC: Intel: mrfld: return error codes when an error occursColin Ian King
commit 3025571edd9df653e1ad649f0638368a39d1bbb5 upstream. Currently function sst_platform_get_resources always returns zero and error return codes set by the function are never returned. Fix this by returning the error return code in variable ret rather than the hard coded zero. Addresses-Coverity: ("Unused value") Fixes: f533a035e4da ("ASoC: Intel: mrfld - create separate module for pci part") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ASoC: Intel: mrfld: fix incorrect check on p->sinkColin Ian King
commit f5e056e1e46fcbb5f74ce560792aeb7d57ce79e6 upstream. The check on p->sink looks bogus, I believe it should be p->source since the following code blocks are related to p->source. Fix this by replacing p->sink with p->source. Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Copy-paste error") Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ext4: fix incorrect inodes per group in error messageJosh Triplett
commit b9c538da4e52a7b79dfcf4cfa487c46125066dfb upstream. If ext4_fill_super detects an invalid number of inodes per group, the resulting error message printed the number of blocks per group, rather than the number of inodes per group. Fix it to print the correct value. Fixes: cd6bb35bf7f6d ("ext4: use more strict checks for inodes_per_block on mount") Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ext4: fix incorrect group count in ext4_fill_super error messageJosh Triplett
commit df41460a21b06a76437af040d90ccee03888e8e5 upstream. ext4_fill_super doublechecks the number of groups before mounting; if that check fails, the resulting error message prints the group count from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly computed group count instead (which at that point has just been computed in "blocks_count"). Signed-off-by: Josh Triplett <josh@joshtriplett.org> Fixes: 4ec1102813798 ("ext4: Add sanity checks for the superblock before mounting the filesystem") Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.1585431964.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24jbd2: improve comments about freeing data buffers whose page mapping is NULLzhangyi (F)
commit 780f66e59231fcf882f36c63f287252ee47cc75a upstream. Improve comments in jbd2_journal_commit_transaction() to describe why we don't need to clear the buffer_mapped bit for freeing file mapping buffers whose page mapping is NULL. Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer") Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24scsi: ufs: Fix ufshcd_hold() caused scheduling while atomicCan Guo
commit c63d6099a7959ecc919b2549dc6b71f53521f819 upstream. The async version of ufshcd_hold(async == true), which is only called in queuecommand path as for now, is expected to work in atomic context, thus it should not sleep or schedule out. When it runs into the condition that clocks are ON but link is still in hibern8 state, it should bail out without flushing the clock ungate work. Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24net: ipv6: do not consider routes via gateways for anycast address checkTim Stallard
[ Upstream commit 03e2a984b6165621f287fadf5f4b5cd8b58dcaba ] The behaviour for what is considered an anycast address changed in commit 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception"). This now considers the first address in a subnet where there is a route via a gateway to be an anycast address. This breaks path MTU discovery and traceroutes when a host in a remote network uses the address at the start of a prefix (eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors will not be sent to anycast addresses. This patch excludes any routes with a gateway, or via point to point links, like the behaviour previously from rt6_is_gw_or_nonexthop in net/ipv6/route.c. This can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8:100:: dev lo nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1 ip netns exec test sysctl net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::1 via 2001:db8::2 ping -I 2001:db8::1 2001:db8:1::1 -c1 ping -I 2001:db8:100:: 2001:db8:1::1 -c1 ip addr delete 2001:db8:100:: dev lo ip netns delete test Currently the first ping will get back a destination unreachable ICMP error, but the second will never get a response, with "icmp6_send: acast source" logged. After this patch, both get destination unreachable ICMP replies. Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24net: qrtr: send msgs from local of same id as broadcastWang Wenhu
[ Upstream commit 6dbf02acef69b0742c238574583b3068afbd227c ] If the local node id(qrtr_local_nid) is not modified after its initialization, it equals to the broadcast node id(QRTR_NODE_BCAST). So the messages from local node should not be taken as broadcast and keep the process going to send them out anyway. The definitions are as follow: static unsigned int qrtr_local_nid = NUMA_NO_NODE; Fixes: fdf5fd397566 ("net: qrtr: Broadcast messages only from control port") Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24net: ipv4: devinet: Fix crash when add/del multicast IP with autojoinTaras Chornyi
[ Upstream commit 690cc86321eb9bcee371710252742fb16fe96824 ] When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device with autojoin flag or when multicast ip is deleted kernel will crash. steps to reproduce: ip addr add 224.0.0.0/32 dev eth0 ip addr del 224.0.0.0/32 dev eth0 or ip addr add 224.0.0.0/32 dev eth0 autojoin Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 pc : _raw_write_lock_irqsave+0x1e0/0x2ac lr : lock_sock_nested+0x1c/0x60 Call trace: _raw_write_lock_irqsave+0x1e0/0x2ac lock_sock_nested+0x1c/0x60 ip_mc_config.isra.28+0x50/0xe0 inet_rtm_deladdr+0x1a8/0x1f0 rtnetlink_rcv_msg+0x120/0x350 netlink_rcv_skb+0x58/0x120 rtnetlink_rcv+0x14/0x20 netlink_unicast+0x1b8/0x270 netlink_sendmsg+0x1a0/0x3b0 ____sys_sendmsg+0x248/0x290 ___sys_sendmsg+0x80/0xc0 __sys_sendmsg+0x68/0xc0 __arm64_sys_sendmsg+0x20/0x30 el0_svc_common.constprop.2+0x88/0x150 do_el0_svc+0x20/0x80 el0_sync_handler+0x118/0x190 el0_sync+0x140/0x180 Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24hsr: check protocol version in hsr_newlink()Taehee Yoo
[ Upstream commit 4faab8c446def7667adf1f722456c2f4c304069c ] In the current hsr code, only 0 and 1 protocol versions are valid. But current hsr code doesn't check the version, which is received by userspace. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4 In the test commands, version 4 is invalid. So, the command should be failed. After this patch, following error will occur. "Error: hsr: Only versions 0..1 are supported." Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mfd: dln2: Fix sanity checking for endpointsAndy Shevchenko
[ Upstream commit fb945c95a482200876993977008b67ea658bd938 ] While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum <oneukum@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24misc: echo: Remove unnecessary parentheses and simplify check for zeroNathan Chancellor
[ Upstream commit 85dc2c65e6c975baaf36ea30f2ccc0a36a8c8add ] Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/misc/echo/echo.c:384:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((ec->nonupdate_dwell == 0)) { ~~~~~~~~~~~~~~~~~~~~^~~~ drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses around the comparison to silence this warning if ((ec->nonupdate_dwell == 0)) { ~ ^ ~ drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality comparison into an assignment if ((ec->nonupdate_dwell == 0)) { ^~ = 1 warning generated. Remove them and while we're at it, simplify the zero check as '!var' is used more than 'var == 0'. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24powerpc/fsl_booke: Avoid creating duplicate tlb1 entryLaurentiu Tudor
[ Upstream commit aa4113340ae6c2811e046f08c2bc21011d20a072 ] In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24ipmi: fix hung processes in __get_guid()Wen Yang
[ Upstream commit 32830a0534700f86366f371b150b17f0f0d140d7 ] The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780 [ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80 [ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180 [ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200 [ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0 [ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60 [ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10 [ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180 Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Corey Minyard <minyard@acm.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: openipmi-developer@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 2.6.17- Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24drm: Remove PageReserved manipulation from drm_pci_allocChris Wilson
[ Upstream commit ea36ec8623f56791c6ff6738d0509b7920f85220 ] drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma facilities, and we have no special reason within the drm layer to behave differently. In particular, since commit de09d31dd38a50fdce106c15abd68432eebbd014 Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. it has been illegal to combine GFP_COMP with SetPageReserved, so lets stop doing both and leave the dma layer to its own devices. Reported-by: Taketo Kabe Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24drm/dp_mst: Fix clearing payload state on topology disableLyude Paul
[ Upstream commit 8732fe46b20c951493bfc4dba0ad08efdf41de81 ] The issues caused by: commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology mgr") Prompted me to take a closer look at how we clear the payload state in general when disabling the topology, and it turns out there's actually two subtle issues here. The first is that we're not grabbing &mgr.payload_lock when clearing the payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical lock order is &mgr.payload_lock -> &mgr.lock (because we always want &mgr.lock to be the inner-most lock so topology validation always works), this makes perfect sense. It also means that -technically- there could be racing between someone calling drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a modeset occurring that's modifying the payload state at the same time. The second is the more obvious issue that Wayne Lin discovered, that we're not clearing proposed_payloads when disabling the topology. I actually can't see any obvious places where the racing caused by the first issue would break something, and it could be that some of our higher-level locks already prevent this by happenstance, but better safe then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst() first grabs &mgr.payload_lock followed by &mgr.lock so that we never race when modifying the payload state. Then, we also clear proposed_payloads to fix the original issue of enabling a new topology with a dirty payload state. This doesn't clear any of the drm_dp_vcpi structures, but those are getting destroyed along with the ports anyway. Changes since v1: * Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead - vsyrjala Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24Btrfs: fix crash during unmount due to race with delayed inode workersFilipe Manana
[ Upstream commit f0cc2cd70164efe8f75c5d99560f0f69969c72e4 ] During unmount we can have a job from the delayed inode items work queue still running, that can lead to at least two bad things: 1) A crash, because the worker can try to create a transaction just after the fs roots were freed; 2) A transaction leak, because the worker can create a transaction before the fs roots are freed and just after we committed the last transaction and after we stopped the transaction kthread. A stack trace example of the crash: [79011.691214] kernel BUG at lib/radix-tree.c:982! [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2 (...) [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs] [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170 (...) [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001 [79011.709270] FS: 0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000 [79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [79011.715448] Call Trace: [79011.715925] record_root_in_trans+0x72/0xf0 [btrfs] [79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs] [79011.717925] start_transaction+0xdd/0x5c0 [btrfs] [79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs] [79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs] [79011.720773] process_one_work+0x26d/0x6a0 [79011.721497] worker_thread+0x4f/0x3e0 [79011.722153] ? process_one_work+0x6a0/0x6a0 [79011.722901] kthread+0x103/0x140 [79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70 [79011.724379] ret_from_fork+0x3a/0x50 (...) The following diagram shows a sequence of steps that lead to the crash during ummount of the filesystem: CPU 1 CPU 2 CPU 3 btrfs_punch_hole() btrfs_btree_balance_dirty() btrfs_balance_delayed_items() --> sees fs_info->delayed_root->items with value 200, which is greater than BTRFS_DELAYED_BACKGROUND (128) and smaller than BTRFS_DELAYED_WRITEBACK (512) btrfs_wq_run_delayed_node() --> queues a job for fs_info->delayed_workers to run btrfs_async_run_delayed_root() btrfs_async_run_delayed_root() --> job queued by CPU 1 --> starts picking and running delayed nodes from the prepare_list list close_ctree() btrfs_delete_unused_bgs() btrfs_commit_super() btrfs_join_transaction() --> gets transaction N btrfs_commit_transaction(N) --> set transaction state to TRANTS_STATE_COMMIT_START btrfs_first_prepared_delayed_node() --> picks delayed node X through the prepared_list list btrfs_run_delayed_items() btrfs_first_delayed_node() --> also picks delayed node X but through the node_list list __btrfs_commit_inode_delayed_items() --> runs all delayed items from this node and drops the node's item count to 0 through call to btrfs_release_delayed_inode() --> finishes running any remaining delayed nodes --> finishes transaction commit --> stops cleaner and transaction threads btrfs_free_fs_roots() --> frees all roots and removes them from the radix tree fs_info->fs_roots_radix btrfs_join_transaction() start_transaction() btrfs_record_root_in_trans() record_root_in_trans() radix_tree_tag_set() --> crashes because the root is not in the radix tree anymore If the worker is able to call btrfs_join_transaction() before the unmount task frees the fs roots, we end up leaking a transaction and all its resources, since after the call to btrfs_commit_super() and stopping the transaction kthread, we don't expect to have any transaction open anymore. When this situation happens the worker has a delayed node that has no more items to run, since the task calling btrfs_run_delayed_items(), which is doing a transaction commit, picks the same node and runs all its items first. We can not wait for the worker to complete when running delayed items through btrfs_run_delayed_items(), because we call that function in several phases of a transaction commit, and that could cause a deadlock because the worker calls btrfs_join_transaction() and the task doing the transaction commit may have already set the transaction state to TRANS_STATE_COMMIT_DOING. Also it's not possible to get into a situation where only some of the items of a delayed node are added to the fs/subvolume tree in the current transaction and the remaining ones in the next transaction, because when running the items of a delayed inode we lock its mutex, effectively waiting for the worker if the worker is running the items of the delayed node already. Since this can only cause issues when unmounting a filesystem, fix it in a simple way by waiting for any jobs on the delayed workers queue before calling btrfs_commit_supper() at close_ctree(). This works because at this point no one can call btrfs_btree_balance_dirty() or btrfs_balance_delayed_items(), and if we end up waiting for any worker to complete, btrfs_commit_super() will commit the transaction created by the worker. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24powerpc/64/tm: Don't let userspace set regs->trap via sigreturnMichael Ellerman
commit c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream. In restore_tm_sigcontexts() we take the trap value directly from the user sigcontext with no checking: err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); This means we can be in the kernel with an arbitrary regs->trap value. Although that's not immediately problematic, there is a risk we could trigger one of the uses of CHECK_FULL_REGS(): #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) It can also cause us to unnecessarily save non-volatile GPRs again in save_nvgprs(), which shouldn't be problematic but is still wrong. It's also possible it could trick the syscall restart machinery, which relies on regs->trap not being == 0xc00 (see 9a81c16b5275 ("powerpc: fix double syscall restarts")), though I haven't been able to make that happen. Finally it doesn't match the behaviour of the non-TM case, in restore_sigcontext() which zeroes regs->trap. So change restore_tm_sigcontexts() to zero regs->trap. This was discovered while testing Nick's upcoming rewrite of the syscall entry path. In that series the call to save_nvgprs() prior to signal handling (do_notify_resume()) is removed, which leaves the low-bit of regs->trap uncleared which can then trigger the FULL_REGS() WARNs in setup_tm_sigcontexts(). Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24libata: Return correct status in sata_pmp_eh_recover_pm() when ↵Kai-Heng Feng
ATA_DFLAG_DETACH is set commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24hfsplus: fix crash and filesystem corruption when deleting filesSimon Gander
commit 25efb2ffdf991177e740b2f63e92b4ec7d310a92 upstream. When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes. To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix. To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree. Signed-off-by: Simon Gander <simon@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24cpufreq: powernv: Fix use-after-freeOliver O'Halloran
commit d0a72efac89d1c35ac55197895201b7b94c5e6ef upstream. The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24kmod: make request_module() return an error when autoloading is disabledEric Biggers
commit d7d27cfc5cf0766a26a8f56868c5ad5434735126 upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jessica Yu <jeyu@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24Input: i8042 - add Acer Aspire 5738z to nomux listHans de Goede
commit ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream. The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24s390/diag: fix display of diagnose call statisticsMichael Mueller
commit 6c7c851f1b666a8a455678a0b480b9162de86052 upstream. Show the full diag statistic table and not just parts of it. The issue surfaced in a KVM guest with a number of vcpus defined smaller than NR_DIAG_STAT. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Cc: stable@vger.kernel.org Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ocfs2: no need try to truncate file beyond i_sizeChangwei Ge
commit 783fda856e1034dee90a873f7654c418212d12d7 upstream. Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode size. This restriction is not necessary and violates fallocate(2) semantics. If fallocate(2) offset is beyond inode size, just return success and do nothing further. Otherwise, ocfs2 will crash the kernel. kernel BUG at fs/ocfs2//alloc.c:7264! ocfs2_truncate_inline+0x20f/0x360 [ocfs2] ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2] __ocfs2_change_file_space+0x4a5/0x650 [ocfs2] ocfs2_fallocate+0x83/0xa0 [ocfs2] vfs_fallocate+0x148/0x230 SyS_fallocate+0x48/0x80 do_syscall_64+0x79/0x170 Signed-off-by: Changwei Ge <chge@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24ext4: fix a data race at inode->i_blocksQian Cai
commit 28936b62e71e41600bab319f262ea9f9b1027629 upstream. inode->i_blocks could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118: inode_add_bytes+0x65/0xf0 __inode_add_bytes at fs/stat.c:689 (inlined by) inode_add_bytes at fs/stat.c:702 ext4_mb_new_blocks+0x418/0xca0 [ext4] ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4] ext4_map_blocks+0x1a9/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block_unwritten+0x33/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] ext4_da_write_begin+0x35f/0x8f0 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65: ext4_do_update_inode+0x4a0/0xf60 [ext4] ext4_inode_blocks_set at fs/ext4/inode.c:4815 ext4_mark_iloc_dirty+0xaf/0x160 [ext4] ext4_mark_inode_dirty+0x129/0x3e0 [ext4] ext4_convert_unwritten_extents+0x253/0x2d0 [ext4] ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4] ext4_end_io_rsv_work+0x22c/0x350 [ext4] process_one_work+0x54f/0xb90 worker_thread+0x80/0x5f0 kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 4 locks held by kworker/u256:0/8: #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90 #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90 #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4] irq event stamp: 3009267 hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4] The plain read is outside of inode->i_lock critical section which results in a data race. Fix it by adding READ_ONCE() there. Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGHNathan Chancellor
commit c50156526a2f7176b50134e3e5fb108ba09791b2 upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/144 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24arm64: armv8_deprecated: Fix undef_hook mask for thumb setendFredrik Strupe
commit fc2266011accd5aeb8ebc335c381991f20e26e33 upstream. For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0. However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode. An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650. This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions. Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks") Cc: <stable@vger.kernel.org> # 4.0.x- Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Fredrik Strupe <fredrik@strupe.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-pointSteffen Maier
commit 819732be9fea728623e1ed84eba28def7384ad1f upstream. v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports") introduced zfcp automatic port scan. Before that, the user had to use the sysfs attribute "port_add" of an FCP device (adapter) to add and open remote (target) ports, even for the remote peer port in point-to-point topology. That code path did a proper port open recovery trigger taking the erp_lock. Since above commit, a new helper function zfcp_erp_open_ptp_port() performed an UNlocked port open recovery trigger. This can race with other parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt e.g. adapter->erp_total_count or adapter->erp_ready_head. As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi: zfcp: fix infinite iteration on ERP ready list"), there was an endless loop during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54ace3 ("scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger") introduced a lockdep assertion for that case. As a side effect, that lockdep assertion now uncovered the unlocked code path for PtP. It is from within an adapter ERP action: zfcp_erp_strategy[1479] intentionally DROPs erp lock around zfcp_erp_strategy_do_action() zfcp_erp_strategy_do_action[1441] NO erp lock zfcp_erp_adapter_strategy[876] NO erp lock zfcp_erp_adapter_strategy_open[855] NO erp lock zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around zfcp_erp_action_to_running(), BUT *_not_* around zfcp_erp_enqueue_ptp_port() zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock _zfcp_erp_port_reopen[432] assumes to be called with erp lock zfcp_erp_action_enqueue[314] assumes to be called with erp lock zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock: lockdep_assert_held(&adapter->erp_lock); It causes the following lockdep warning: WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x16a/0x188 no locks held by zfcperp0.0.17c0/775. Fix this by using the proper locked recovery trigger helper function. Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports") Cc: <stable@vger.kernel.org> #v2.6.27+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24dm verity fec: fix memory leak in verity_fec_dtrShetty, Harshini X (EXT-Sony Mobile)
commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream. Fix below kmemleak detected in verity_fec_ctr. output_pool is allocated for each dm-verity-fec device. But it is not freed when dm-table for the verity target is removed. Hence free the output mempool in destructor function verity_fec_dtr. unreferenced object 0xffffffffa574d000 (size 4096): comm "init", pid 1667, jiffies 4294894890 (age 307.168s) hex dump (first 32 bytes): 8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060e82407>] __kmalloc+0x2b4/0x340 [<00000000dd99488f>] mempool_kmalloc+0x18/0x20 [<000000002560172b>] mempool_init_node+0x98/0x118 [<000000006c3574d2>] mempool_init+0x14/0x20 [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0 [<000000000887261b>] verity_ctr+0x87c/0x8d0 [<000000002b1e1c62>] dm_table_add_target+0x174/0x348 [<000000002ad89eda>] table_load+0xe4/0x328 [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0 [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928 [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98 [<000000005361e2e8>] el0_svc_common+0xa0/0x158 [<000000001374818f>] el0_svc_handler+0x6c/0x88 [<000000003364e9f4>] el0_svc+0x8/0xc [<000000009d84cec9>] 0xffffffffffffffff Fixes: a739ff3f543af ("dm verity: add support for forward error correction") Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()") Cc: stable@vger.kernel.org Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mm: Use fixed constant in page_frag_alloc instead of size + 1Alexander Duyck
commit 8644772637deb121f7ac2df690cbf83fa63d3b70 upstream. This patch replaces the size + 1 value introduced with the recent fix for 1 byte allocs with a constant value. The idea here is to reduce code overhead as the previous logic would have to read size into a register, then increment it, and write it back to whatever field was being used. By using a constant we can avoid those memory reads and arithmetic operations in favor of just encoding the maximum value into the operation itself. Fixes: 2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs") Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24tools: gpio: Fix out-of-tree build regressionAnssi Hannula
commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream. Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24x86/speculation: Remove redundant arch_smt_update() invocationZhenzhong Duan
commit 34d66caf251df91ff27b24a3a786810d29989eca upstream. With commit a74cfffb03b7 ("x86/speculation: Rework SMT state change"), arch_smt_update() is invoked from each individual CPU hotplug function. Therefore the extra arch_smt_update() call in the sysfs SMT control is redundant. Fixes: a74cfffb03b7 ("x86/speculation: Rework SMT state change") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <konrad.wilk@oracle.com> Cc: <dwmw@amazon.co.uk> Cc: <bp@suse.de> Cc: <srinivas.eeda@oracle.com> Cc: <peterz@infradead.org> Cc: <hpa@zytor.com> Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 08:29:42 +0000