| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Disable stuff which is known to have issues on RT
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This needs to be revisited. Not sure whether we can avoid to make this
lock raw, but it'd really like to.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Add cpu_chill() to replace cpu_relax(). cpu_chill()
defaults to cpu_relax() for non RT. On RT it puts the looping task to
sleep for a tick so the preempted task can make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Tasks can block on hotplug.lock in pin_current_cpu(), but their state
might be != RUNNING. So the mutex wakeup will set the state
unconditionally to RUNNING. That might cause spurious unexpected
wakeups. We could provide a state preserving mutex_lock() function,
but this is semantically backwards. So instead we convert the
hotplug.lock() to a spinlock for RT, which has the state preserving
semantics already.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/1330702617.25686.265.camel@gandalf.stny.rr.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Currently the RT version of the lglocks() does a for_each_online_cpu()
in the name##_global_lock_online() functions. Non-rt uses its own
mask for this, and for good reason.
A task may grab a *_global_lock_online(), and in the mean time, one
of the CPUs goes offline. Now when that task does a *_global_unlock_online()
it releases all the locks *except* the one that went offline.
Now if that CPU were to come back on line, its lock is now owned by a
task that never released it when it should have.
This causes all sorts of fun errors. Like owners of a lock no longer
existing, or sleeping on IO, waiting to be woken up by a task that
happens to be blocked on the lock it never released.
Convert the RT versions to use the lglock specific cpumasks. As once
a CPU comes on line, the mask is set, and never cleared even when the
CPU goes offline. The locks for that CPU will still be taken and released.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/20120301190345.374756214@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The wait_task_interactive() will have a task sleep waiting for another
task to have a certain state. But it ignores the rt_spin_locks state
and can return with an incorrect result if the task it is waiting
for is blocked on a rt_spin_lock() and is waking up.
The rt_spin_locks save the tasks state in the saved_state field
and the wait_task_interactive() must also test that state.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/20120301190345.979435764@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In RT the reader lock is a mutex and we can not grab it when preemption is
disabled. The in_atomic() check that is there does not check if irqs are
disabled. Add that check as well.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/20120301190345.786365803@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When taking the pi_lock, we must disable interrupts because the
pi_lock can also be taken in an interrupt handler.
Use raw_spin_lock_irq() instead of raw_spin_lock().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/20120301190345.165160680@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Revert the RT patch:
Author: Ingo Molnar <mingo@elte.hu>
Date: Fri Jul 3 08:30:32 2009 -0500
timers: fix timer hotplug on -rt
Here we are in the CPU_DEAD notifier, and we must not sleep nor
enable interrupts.
There's no problem with sleeping in this notifier.
But the get_cpu_var() had to be converted to a get_local_var().
Replace the previous fix with the get_local_var() convert.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/20120301190344.948157137@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If a low prio writer gets preempted while holding the seqlock write
locked, a high prio reader spins forever on RT.
To prevent this let the reader grab the spinlock, so it blocks and
eventually boosts the writer. This way the writer can proceed and
endless spinning is prevented.
For seqcount writers we disable preemption over the update code
path. Thaanks to Al Viro for distangling some VFS code to make that
possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
We can't deal with the cpumask allocations which happen in atomic
context (see arch/x86/kernel/apic/io_apic.c) on RT right now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Use the BUG_ON_NORT variant for the irq_disabled() checks. RT has
interrupts legitimately enabled here as we cant deadlock against the
irq thread due to the "sleeping spinlocks" conversion.
Reported-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Restrict the preempt disabled regions to the actual floating point
operations and enable preemption for the administrative actions.
This is necessary on RT to avoid that kfree and other operations are
called with preemption disabled.
Reported-and-tested-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add a CONFIG option to allow the output from Magic SysRq to be output
immediately, even if this causes large latencies.
If PREEMPT_RT_FULL, printk() will not try to acquire the console lock
when interrupts or preemption are disabled. If the console lock is
not acquired the printk() output will be buffered, but will not be
output immediately. Some drivers call into the Magic SysRq code
with interrupts or preemption disabled, so the output of Magic SysRq
will be buffered instead of printing immediately if this option is
not selected.
Even with this option selected, Magic SysRq output will be delayed
if the attempt to acquire the console lock fails.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Link: http://lkml.kernel.org/r/4E7CEF60.5020508@am.sony.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Current sysv sems have a weird ass wakeup scheme that involves keeping
preemption disabled over a potential O(n^2) loop and busy waiting on
that on other CPUs.
Kill this and simply wake the task directly from under the sem_lock.
This was discovered by a migrate_disable() debug feature that
disallows:
spin_lock();
preempt_disable();
spin_unlock()
preempt_enable();
Cc: Manfred Spraul <manfred@colorfullife.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Manfred Spraul <manfred@colorfullife.com>
Link: http://lkml.kernel.org/r/1315994224.5040.1.camel@twins
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In fact, with migrate_disable() existing one could play games with
kmap_atomic. You could save/restore the kmap_atomic slots on context
switch (if there are any in use of course), this should be esp easy now
that we have a kmap_atomic stack.
Something like the below.. it wants replacing all the preempt_disable()
stuff with pagefault_disable() && migrate_disable() of course, but then
you can flip kmaps around like below.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[dvhart@linux.intel.com: build fix]
Link: http://lkml.kernel.org/r/1311842631.5890.208.camel@twins
|
|
Add a /sys/kernel entry to indicate that the kernel is a
realtime kernel.
Clark says that he needs this for udev rules, udev needs to evaluate
if its a PREEMPT_RT kernel a few thousand times and parsing uname
output is too slow or so.
Are there better solutions? Should it exist and return 0 on !-rt?
Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
|
|
On 07/27/2011 04:37 PM, Thomas Gleixner wrote:
> - KGDB (not yet disabled) is reportedly unusable on -rt right now due
> to missing hacks in the console locking which I dropped on purpose.
>
To work around this in the short term you can use this patch, in
addition to the clocksource watchdog patch that Thomas brewed up.
Comments are welcome of course. Ultimately the right solution is to
change separation between the console and the HW to have a polled mode
+ work queue so as not to introduce any kind of latency.
Thanks,
Jason.
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
RT is not too happy about the shared timer interrupt in AT91
devices. Default to tclib timer for RT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Do not take lock for non handled cases (might be atomic context)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
BUG: sleeping function called from invalid context at kernel/rtmutex.c:645
in_atomic(): 1, irqs_disabled(): 0, pid: 1739, name: bash
Pid: 1739, comm: bash Not tainted 3.0.6-rt17-00284-gb76d419 #3
Call Trace:
[<c06e3b5d>] ? printk+0x1d/0x20
[<c01390b6>] __might_sleep+0xe6/0x110
[<c06e633c>] rt_spin_lock+0x1c/0x30
[<c01655a6>] flush_gcwq+0x236/0x320
[<c021c651>] ? kfree+0xe1/0x1a0
[<c05b7178>] ? __cpufreq_remove_dev+0xf8/0x260
[<c0183fad>] ? rt_down_write+0xd/0x10
[<c06cd91e>] workqueue_cpu_down_callback+0x26/0x2d
[<c06e9d65>] notifier_call_chain+0x45/0x60
[<c0171cfe>] __raw_notifier_call_chain+0x1e/0x30
[<c014c9b4>] __cpu_notify+0x24/0x40
[<c06cbc6f>] _cpu_down+0xdf/0x330
[<c06cbef0>] cpu_down+0x30/0x50
[<c06cd6b0>] store_online+0x50/0xa7
[<c06cd660>] ? acpi_os_map_memory+0xec/0xec
[<c04f2faa>] sysdev_store+0x2a/0x40
[<c02887a4>] sysfs_write_file+0xa4/0x100
[<c0229ab2>] vfs_write+0xa2/0x170
[<c0288700>] ? sysfs_poll+0x90/0x90
[<c0229d92>] sys_write+0x42/0x70
[<c06ecedf>] sysenter_do_call+0x12/0x2d
CPU 1 is now offline
SMP alternatives: switching to UP code
SMP alternatives: switching to SMP code
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
BUG: sleeping function called from invalid context at kernel/rtmutex.c:645
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: kworker/0:0
Pid: 0, comm: kworker/0:0 Not tainted 3.0.6-rt17-00284-gb76d419 #3
Call Trace:
[<c06e3b5d>] ? printk+0x1d/0x20
[<c01390b6>] __might_sleep+0xe6/0x110
[<c06e633c>] rt_spin_lock+0x1c/0x30
[<c06cd85b>] workqueue_cpu_up_callback+0x56/0xf3
[<c06e9d65>] notifier_call_chain+0x45/0x60
[<c0171cfe>] __raw_notifier_call_chain+0x1e/0x30
[<c014c9b4>] __cpu_notify+0x24/0x40
[<c014c9ec>] cpu_notify+0x1c/0x20
[<c06e1d43>] notify_cpu_starting+0x1e/0x20
[<c06e0aad>] smp_callin+0xfb/0x10e
[<c06e0ad9>] start_secondary+0x19/0xd7
NMI watchdog enabled, takes one hw-pmu counter.
Switched to NOHz mode on CPU #1
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/1318762607-2261-5-git-send-email-yong.zhang0@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
PF_THREAD_BOUND is set by kthread_bind() and means the thread is bound
to a particular cpu for correctness. The workqueue code abuses this
flag and blindly sets it for all created threads, including those that
are free to migrate.
Restore the original semantics now that the worst abuse in the
cpu-hotplug path are gone. The only icky bit is the rescue thread for
per-cpu workqueues, this cannot use kthread_bind() but will use
set_cpus_allowed_ptr() to migrate itself to the desired cpu.
Set and clear PF_THREAD_BOUND manually here.
XXX: I think worker_maybe_bind_and_lock()/worker_unbind_and_unlock()
should also do a get_online_cpus(), this would likely allow us to
remove the while loop.
XXX: should probably repurpose GCWQ_DISASSOCIATED to warn on adding
works after CPU_DOWN_PREPARE -- its dual use to mark unbound gcwqs is
a tad annoying though.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current workqueue code does crazy stuff on cpu unplug, it relies on
forced affine breakage, thereby violating per-cpu expectations. Worse,
it tries to re-attach to a cpu if the thing comes up again before all
previously queued works are finished. This breaks (admittedly bonkers)
cpu-hotplug use that relies on a down-up cycle to push all usage away.
Introduce a new WQ_NON_AFFINE flag that indicates a per-cpu workqueue
will not respect cpu affinity and use this to migrate all its pending
works to whatever cpu is doing cpu-down.
This also adds a warning for queue_on_cpu() users which warns when its
used on WQ_NON_AFFINE workqueues for the API implies you care about
what cpu things are ran on when such workqueues cannot guarantee this.
For the rest, simply flush all per-cpu works and don't mess about.
This also means that currently all workqueues that are manually
flushing things on cpu-down in order to provide the per-cpu guarantee
no longer need to do so.
In short, we tell the WQ what we want it to do, provide validation for
this and loose ~250 lines of code.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Normally the x86-64 trap handlers for debug/int 3/stack fault run
on a special interrupt stack to make them more robust
when dealing with kernel code.
The PREEMPT_RT kernel can sleep in locks even while allocating
GFP_ATOMIC memory. When one of these trap handlers needs to send
real time signals for ptrace it allocates memory and could then
try to to schedule. But it is not allowed to schedule on a
IST stack. This can cause warnings and hangs.
This patch disables the IST stacks for these handlers for PREEMPT_RT
kernel. Instead let them run on the normal process stack.
The kernel only really needs the ISTs here to make kernel debuggers more
robust in case someone sets a break point somewhere where the stack is
invalid. But there are no kernel debuggers in the standard kernel
that do this.
It also means kprobes cannot be set in situations with invalid stack;
but that sounds like a reasonable restriction.
The stack fault change could minimally impact oops quality, but not very
much because stack faults are fairly rare.
A better solution would be to use similar logic as the NMI "paranoid"
path: check if signal is for user space, if yes go back to entry.S, switch stack,
call sync_regs, then do the signal sending etc.
But this patch is much simpler and should work too with minimal impact.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Simplifies the separation of anon_rw_semaphores and rw_semaphores for
-rt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
CPU bringup calls into the random pool to initialize the stack
canary. During boot that works nicely even on RT as the might sleep
checks are disabled. During CPU hotplug the might sleep checks
trigger. Making the locks in random raw is a major PITA, so avoid the
call on RT is the only sensible solution. This is basically the same
randomness which we get during boot where the random pool has no
entropy and we rely on the TSC randomnness.
Reported-by: Carsten Emde <carsten.emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
mce_timer is started in atomic contexts of cpu bringup. This results
in might_sleep() warnings on RT. Convert mce_timer to a hrtimer to
avoid this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On Sat, 2007-10-27 at 11:44 +0200, Ingo Molnar wrote:
> * Nick Piggin <nickpiggin@yahoo.com.au> wrote:
>
> > > [10138.175796] [<c0105de3>] show_trace+0x12/0x14
> > > [10138.180291] [<c0105dfb>] dump_stack+0x16/0x18
> > > [10138.184769] [<c011609f>] native_smp_call_function_mask+0x138/0x13d
> > > [10138.191117] [<c0117606>] smp_call_function+0x1e/0x24
> > > [10138.196210] [<c012f85c>] on_each_cpu+0x25/0x50
> > > [10138.200807] [<c0115c74>] flush_tlb_all+0x1e/0x20
> > > [10138.205553] [<c016caaf>] kmap_high+0x1b6/0x417
> > > [10138.210118] [<c011ec88>] kmap+0x4d/0x4f
> > > [10138.214102] [<c026a9d8>] ntfs_end_buffer_async_read+0x228/0x2f9
> > > [10138.220163] [<c01a0e9e>] end_bio_bh_io_sync+0x26/0x3f
> > > [10138.225352] [<c01a2b09>] bio_endio+0x42/0x6d
> > > [10138.229769] [<c02c2a08>] __end_that_request_first+0x115/0x4ac
> > > [10138.235682] [<c02c2da7>] end_that_request_chunk+0x8/0xa
> > > [10138.241052] [<c0365943>] ide_end_request+0x55/0x10a
> > > [10138.246058] [<c036dae3>] ide_dma_intr+0x6f/0xac
> > > [10138.250727] [<c0366d83>] ide_intr+0x93/0x1e0
> > > [10138.255125] [<c015afb4>] handle_IRQ_event+0x5c/0xc9
> >
> > Looks like ntfs is kmap()ing from interrupt context. Should be using
> > kmap_atomic instead, I think.
>
> it's not atomic interrupt context but irq thread context - and -rt
> remaps kmap_atomic() to kmap() internally.
Hm. Looking at the change to mm/bounce.c, perhaps I should do this
instead?
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
