summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-30Linux 4.4.134v4.4.134Greg Kroah-Hartman
2018-05-30s390/ftrace: use expoline for indirect branchesMartin Schwidefsky
commit 23a4d7fd34856da8218c4cfc23dba7a6ec0a423a upstream. The return from the ftrace_stub, _mcount, ftrace_caller and return_to_handler functions is done with "br %r14" and "br %r1". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. The ftrace_caller function is a special case as it returns to the start of a function and may only use %r0 and %r1. For a pre z10 machine the standard execute trampoline uses a LARL + EX to do this, but this requires *two* registers in the range %r1..%r15. To get around this the 'br %r1' located in the lowcore is used, then the EX instruction does not need an address register. But the lowcore trick may only be used for pre z14 machines, with noexec=on the mapping for the first page may not contain instructions. The solution for that is an ALTERNATIVE in the expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to EXRL, this relies on the fact that a machine that supports noexec=on has EXRL as well. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30kdb: make "mdr" command repeatRandy Dunlap
[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30Bluetooth: btusb: Add device ID for RTL8822BELarry Finger
[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by: Hon Weng Chong <honwchong@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ASoC: samsung: i2s: Ensure the RCLK rate is properly determinedSylwester Nawrocki
[ Upstream commit 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 ] If the RCLK mux clock configuration is specified in DT and no set_sysclk() callback is used in the sound card driver the sclk_srcrate field will remain set to 0, leading to an incorrect PSR divider setting. To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock, so the actual RCLK mux selection is taken into account. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30regulator: of: Add a missing 'of_node_put()' in an error handling path of ↵Christophe JAILLET
'of_regulator_match()' [ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ] If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30scsi: lpfc: Fix frequency of Release WQE CQEsJames Smart
[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ] The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testingJames Smart
[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ] During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30scsi: lpfc: Fix issue_lip if link is disabledJames Smart
[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ] The driver ignored checks on whether the link should be kept administratively down after a link bounce. Correct the checks. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30netlabel: If PF_INET6, check sk_buff ip header versionRichard Haines
[ Upstream commit 213d7f94775322ba44e0bbb55ec6946e9de88cea ] When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by: Richard Haines <richard_c_haines@btinternet.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30selftests/net: fixes psock_fanout eBPF test casePrashant Bhole
[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30perf report: Fix memory corruption in --branch-history mode --branch-historyJiri Olsa
[ Upstream commit e3ebaa465136ecfedf9c6f4671df02bf625f8125 ] Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30perf tests: Use arch__compare_symbol_names to compare symbolsJiri Olsa
[ Upstream commit ab6e9a99345131cd8e54268d1d0dc04a33f7ed11 ] The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 031b84c407c3 ("perf probe ppc: Enable matching against dot symbols automatically") Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specifiedBaoquan He
[ Upstream commit bee3204ec3c49f6f53add9c3962c9012a5c036fa ] Currently the kdump kernel becomes very slow if 'noapic' is specified. Normal kernel doesn't have this bug. Kernel parameter 'noapic' is used to disable IO-APIC in system for testing or special purpose. Here the root cause is that in kdump kernel LAPIC is disabled since commit: 522e664644 ("x86/apic: Disable I/O APIC before shutdown of the local APIC") In this case we need set up through-local-APIC on boot CPU in setup_local_APIC(). In normal kernel the legacy irq mode is enabled by the BIOS. If it is virtual wire mode, the local-APIC has been enabled and set as through-local-APIC. Though we fixed the regression introduced by commit 522e664644, to further improve robustness set up the through-local-APIC mode explicitly, do not rely on the default boot IRQ mode. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/rockchip: Respect page offset for PRIME mmap callsØrjan Eide
[ Upstream commit 57de50af162b67612da99207b061ade3239e57db ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30MIPS: Octeon: Fix logging messages with spurious periods after newlinesJoe Perches
[ Upstream commit db6775ca6e0353d2618ca7d5e210fc36ad43bbd4 ] Using a period after a newline causes bad output. Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by: Joe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17886/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30audit: return on memory error to avoid null pointer dereferenceRichard Guy Briggs
[ Upstream commit 23138ead270045f1b3e912e667967b6094244999 ] If there is a memory allocation error when trying to change an audit kernel feature value, the ignored allocation error will trigger a NULL pointer dereference oops on subsequent use of that pointer. Return instead. Passes audit-testsuite. See: https://github.com/linux-audit/audit-kernel/issues/76 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: not necessary (other funcs check for NULL), but a good practice] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ssPeter Robinson
[ Upstream commit 7c73cf4cc2ac16465f5102437dc0a12d66671bd6 ] The MODULE_ALIAS is required to enable the sun4i-ss driver to load automatically when built at a module. Tested on a Cubietruck. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: samsung: exynos3250: Fix PLL ratesAndrzej Hajda
[ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. In this patch an erroneous P value for 74176002 output frequency is also corrected. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: samsung: exynos5250: Fix PLL ratesAndrzej Hajda
[ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: samsung: exynos5433: Fix PLL ratesAndrzej Hajda
[ Upstream commit ab0447845cffc0fd752df2ccd6b4e34006000ce4 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: samsung: exynos5260: Fix PLL ratesAndrzej Hajda
[ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: samsung: s3c2410: Fix PLL ratesAndrzej Hajda
[ Upstream commit 179db533c08431f509a3823077549773d519358b ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30media: cx25821: prevent out-of-bounds read on array cardColin Ian King
[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ] Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30udf: Provide saner default for invalid uid / gidJan Kara
[ Upstream commit 116e5258e4115aca0c64ac0bf40ded3b353ed626 ] Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by: Steve Kenton <skenton@ou.edu> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30PCI: Add function 1 DMA alias quirk for Marvell 88SE9220Thomas Vincent-Cross
[ Upstream commit 832e4e1f76b8a84991e9db56fdcef1ebce839b8b ] Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: arc_uart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ] The arc_uart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a legitimate DTB. Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: fsl_lpuart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ] The lpuart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: imx: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ] The imx_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: ff05967a07225ab6 ("serial/imx: add of_alias_get_id() reference back") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: mxs-auart: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit dd345a31bfdec350d2593e6de5964e55c7f19c76 ] The auart_port[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 1ea6607d4cdc9179 ("serial: mxs-auart: Allow device tree probing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: samsung: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ] The s3c24xx_serial_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from an incrementing probe index, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using a legitimate DTB or legitimate board code. Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: xuartps: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ] The cdns_uart_port[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30rtc: tx4939: avoid unintended sign extension on a 24 bit shiftColin Ian King
[ Upstream commit 347876ad47b9923ce26e686173bbf46581802ffa ] The shifting of buf[5] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. If the top bit of buf[5] is set then all then all the upper bits sec end up as also being set because of the sign-extension. Fix this by casting buf[5] to an unsigned long before the shift. Detected by CoverityScan, CID#1465292 ("Unintended sign extension") Fixes: 0e1492330cd2 ("rtc: add rtc-tx4939 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddrColin Ian King
[ Upstream commit e1a7418529e33bc4efc346324557251a16a3e79b ] Currently the allocation of priv->oldaddr is not null checked which will lead to subsequent errors when accessing priv->oldaddr. Fix this with a null pointer check and a return of -ENOMEM on allocation failure. Detected with Coccinelle: drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test, possible model on line 1723 Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30hwrng: stm32 - add reset during probelionel.debieve@st.com
[ Upstream commit 326ed382256475aa4b8b7eae8a2f60689fd25e78 ] Avoid issue when probing the RNG without reset if bad status has been detected previously Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30enic: enable rq before updating rq descriptorsGovindarajulu Varadarajan
[ Upstream commit e8588e268509292550634d9a35f2723a207683b2 ] rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30clk: rockchip: Prevent calculating mmc phase if clock rate is zeroShawn Lin
[ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ] The MMC sample and drv clock for rockchip platforms are derived from the bus clock output to the MMC/SDIO card. So it should never happens that the clk rate is zero given it should inherits the clock rate from its parent. If something goes wrong and makes the clock rate to be zero, the calculation would be wrong but may still make the mmc tuning process work luckily. However it makes people harder to debug when the following data transfer is unstable. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30media: em28xx: USB bulk packet size fixBrad Love
[ Upstream commit c7c7e8d7803406daa21e96d00c357de8b77b6764 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by: Brad Love <brad@nextdimension.cc> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30dmaengine: pl330: fix a race condition in case of threaded irqsQi Hou
[ Upstream commit a3ca831249ca8c4c226e4ceafee04e280152e59d ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30media: s3c-camif: fix out-of-bounds array accessArnd Bergmann
[ Upstream commit a398e043637a4819a0e96467bfecaabf3224dd62 ] While experimenting with older compiler versions, I ran into a warning that no longer shows up on gcc-4.8 or newer: drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format': drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds This is an off-by-one bug, leading to an access before the start of the array, while newer compilers silently assume this undefined behavior cannot happen and leave the loop at index 0 if no other entry matches. As Sylvester explains, we actually need to ensure that the value is within the range, so this reworks the loop to be easier to parse correctly, and an additional check to fall back on the first format value for any unexpected input. I found an existing gcc bug for it and added a reduced version of the function there. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3 Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30media: cx23885: Set subdev host data to clk_freq pointerBrad Love
[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30media: cx23885: Override 888 ImpactVCBe crystal frequencyBrad Love
[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ] Hauppauge produced a revision of ImpactVCBe using an 888, with a 25MHz crystal, instead of using the default third overtone 50Mhz crystal. This overrides that frequency so that the cx25840 is properly configured. Without the proper crystal setup the cx25840 cannot load the firmware or decode video. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ALSA: vmaster: Propagate slave errorTakashi Iwai
[ Upstream commit 2e2c177ca84aff092c3c96714b0f6a12900f3946 ] In slave_update() of vmaster code ignores the error from the slave get() callback and copies the values. It's not only about the missing error code but also that this may potentially lead to a leak of uninitialized variables when the slave get() don't clear them. This patch fixes slave_update() not to copy the potentially uninitialized values when an error is returned from the slave get() callback, and to propagate the error value properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30x86/devicetree: Fix device IRQ settings in DTIvan Gorinov
[ Upstream commit 0a5169add90e43ab45ab1ba34223b8583fcaf675 ] IRQ parameters for the SoC devices connected directly to I/O APIC lines (without PCI IRQ routing) may be specified in the Device Tree. Called from DT IRQ parser, irq_create_fwspec_mapping() calls irq_domain_alloc_irqs() with a pointer to irq_fwspec structure as @arg. But x86-specific DT IRQ allocation code casts @arg to of_phandle_args structure pointer and crashes trying to read the IRQ parameters. The function was not converted when the mapping descriptor was changed to irq_fwspec in the generic irqdomain code. Fixes: 11e4438ee330 ("irqdomain: Introduce a firmware-specific IRQ specifier structure") Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/a234dee27ea60ce76141872da0d6bdb378b2a9ee.1520450752.git.ivan.gorinov@intel.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30x86/devicetree: Initialize device tree before using itIvan Gorinov
[ Upstream commit 628df9dc5ad886b0a9b33c75a7b09710eb859ca1 ] Commit 08d53aa58cb1 added CRC32 calculation in early_init_dt_verify() and checking in late initcall of_fdt_raw_init(), making early_init_dt_verify() mandatory. The required call to early_init_dt_verify() was not added to the x86-specific implementation, causing failure to create the sysfs entry in of_fdt_raw_init(). Fixes: 08d53aa58cb1 ("of/fdt: export fdt blob as /sys/firmware/fdt") Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/c8c7e941efc63b5d25ebf9b6350b0f3df38f6098.1520450752.git.ivan.gorinov@intel.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30usb: gadget: composite: fix incorrect handling of OS desc requestsChris Dickens
[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30usb: gadget: udc: change comparison to bitshift when dealing with a maskWolfram Sang
[ Upstream commit ac87e560f7c0f91b62012e9a159c0681a373b922 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30gfs2: Fix fallocate chunk sizeAndreas Gruenbacher
[ Upstream commit 174d1232ebc84fcde8f5889d1171c9c7e74a10a7 ] The chunk size of allocations in __gfs2_fallocate is calculated incorrectly. The size can collapse, causing __gfs2_fallocate to allocate one block at a time, which is very inefficient. This needs fixing in two places: In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate that there is no quota limit. This fixes callers that rely on ap->allowed to be set even when quotas are off. In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the loop to make sure that allocation limits from one resource group won't spill over into another resource group. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30cdrom: do not call check_disk_change() inside cdrom_open()Maurizio Lombardi
[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30hwmon: (pmbus/adm1275) Accept negative page register valuesGuenter Roeck
[ Upstream commit ecb29abd4cb0670c616fb563a078f25d777ce530 ] A negative page register value means that no page needs to be selected. This is used by status register read operations and needs to be accepted. The failure to do so so results in missed status and limit registers. Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 12:59:48 +0000