summaryrefslogtreecommitdiff
path: root/Documentation/arm
AgeCommit message (Collapse)Author
2012-12-15Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
2012-11-16ARM: sunxi: Add basic support for Allwinner A1x SoCsMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-13OMAPFB: use dma_alloc_attrs to allocate memoryTomi Valkeinen
Use dma_alloc_attrs to allocate memory instead of omap specific vram allocator. After this we can remove the omap vram allocator. There are some downsides to this change: 1) dma_alloc_attrs doesn't let us allocate at certain physical address. However, this should not be a problem as this feature of vram allocator is only used when reserving the framebuffer that was initialized by the bootloader, and we don't currently support "passing" a framebuffer from the bootloader to the kernel anyway. 2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and we don't need the ioremap when using VRFB. This patch uses DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently not operational. 3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I changed the ioctl to return 64M for all the values, which, I hope, the applications will interpret as "there's enough vram". 4) "vram" kernel parameter to define how much ram to reserve for video use no longer works. The user needs to enable CMA and use "cma" parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-11Merge branch 'fixes' into for-linusRussell King
Conflicts: arch/arm/kernel/smp.c
2012-10-01Merge tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc documentation updates from Olof Johansson: "Documentation update for Marvell SoCs, the secret decoder ring to all their crazy product names and numbers." * tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: add documentation describing Marvell families of SoC
2012-09-20Merge branch 'samsung/cleanup' into next/cleanupOlof Johansson
From Kukjin Kim: Here, there are cleanup patches for Samsung v3.7 and most of them are related to cleanup Samsung specific gpio API. * samsung/cleanup: gpio: samsung: Update documentation ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c gpio-samsung: Remove now unused s3c2410_gpio* API ARM: S3C24XX: Remove obsolete GPIO API declarations ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API ARM: EXYNOS: cleanup unused code related to GPS
2012-09-19ARM: virt: Update documentation for hyp mode entry supportDave Martin
Document the possibility of the kernel being entered in HYP mode. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-09-07gpio: samsung: Update documentationSylwester Nawrocki
Update Samsung GPIO API documentation to reflect removal of the s3c24xx specific gpio API. While at it, fix some typos. The notes on conversion from s3c2410_* functions to the gpiolib API are left here just in case there is any out of tree code that still needs to be converted. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-08-13Merge branch 'cleanup/io-pci' into next/cleanupsArnd Bergmann
From Rob Herring <robherring2@gmail.com>: This is the 2nd part of mach/io.h removals. This series removes io.h on platforms with PCI by creating a fixed virtual I/O mapping and a common __io() macro. This version has changed a bit to accommodate Tegra converting its PCIe host to a platform driver. Now the virtual space is only reserved during early boot before .map_io() is called. The mapping is not created until calling pci_ioremap_io which can be done at any point after vmalloc is initialized. I've gone back to fixed 64K windows for each PCI bus. This allows removing all the i/o resource setup from the individually platforms and placing it within the common ARM PCI code. I've only tested versatilepb under qemu (with the model hacked up to actually enable i/o space), so any testing is appreciated. iop3xx and mv78xx0 have some risk of breaking as the PCI bus addresses are moved to 0 from matching the cpu host bus addesss. * cleanup/io-pci: ARM: iop3xx: use fixed PCI i/o mapping ARM: mv78xx0: use fixed pci i/o mapping ARM: iop13xx: use fixed PCI i/o mapping iop13xx: use more regular PCI I/O space handling ARM: orion5x: use fixed PCI i/o mapping ARM: kirkwood: use fixed PCI i/o mapping ARM: dove: use fixed PCI i/o mapping ARM: footbridge: use fixed PCI i/o mapping ARM: shark: use fixed PCI i/o mapping ARM: integrator: remove trailing whitespace on pci_v3.c ARM: integrator: use fixed PCI i/o mapping ARM: tegra: use fixed PCI i/o mapping ARM: versatile: use fixed PCI i/o mapping ARM: move PCI i/o resource setup into common code ARM: Add fixed PCI i/o mapping i2c: iop3xx: use standard gpiolib functions i2c: iop3xx: clean-up trailing whitespace Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-11arm: add documentation describing Marvell families of SoCThomas Petazzoni
As stated in the introduction of the document, the families of ARM SoCs at Marvell are very complicated, and it is difficult for newcomers to understand the organization of this SoC family and how it relates to the Linux kernel support for those hardware platforms. This document is only at RFC stage for now, it requires reviews and comments from the Marvell maintainers, the PXA maintainers and the MMP maintainers. For correctness of course, but also to add any other information that would be useful. For example, one of the thing that wasn't clear how to detail in the documentation is how the SoCs relate to each other in terms of hardware IP blocks. For example, most of the Kirkwood/Dove/Armada 370-XP/etc. hardware IPs (I2C, SPI, USB, SATA, etc.) are identical, while the PXA and MMP families are completely separate. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Lior Amsalem <alior@marvell.com> Cc: Maen Suleiman <maen@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Shadi Ammouri <shadi@marvell.com> Cc: Eran Ben-Avi <benavi@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> --- Changes from v3: * Add Arnd Bergmann Acked-by. Changes from v2: * Mention the plat-<foo> directory that each SoC family is using. * Take into account Eric Miao's comments on the PXA/MMP families: add PXA21x/PXA25x/PXA26x to the list, mention which processors are AP+CP or AP only. Clarify the comments on which SoCs were designed by Intel, which ones were designed by Marvell after the acquisition of the XScale family. * Mention long-term plans regarding the support of those SoC families. Changes from v1: * Added publicly available datasheet for the 88F5182 pointed by Andrew Lunn. * Added publicly available datasheet for the 88F5281 found with Google searches * Mentionned the Feroceon core name where appropriate, and Sheeva where appropriate * Fixed the core names for PXA930, PXA935 and PXA955 after comments from Arnd Bergmann. Wikipedia is mistakenly suggesting that PXA93x are Sheeva-based, and there isn't much information available on the web about the 955.
2012-07-25ARM: Add fixed PCI i/o mappingRob Herring
This adds a fixed virtual mapping for PCI i/o addresses. The mapping is located at the last 2MB of vmalloc region (0xfee00000-0xff000000). 2MB is used to align with PMD size, but IO_SPACE_LIMIT is 1MB. The space is reserved after .map_io and can be mapped at any time later with pci_ioremap_io. Platforms which need early i/o mapping (e.g. for vga console) can call pci_map_io_early in their .map_io function. This has changed completely from the 1st implementation which only supported creating the static mapping at .map_io. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-07-20Documentation: Add newline at end-of-file to files lacking oneJesper Juhl
This patch simply adds a newline character at end-of-file to those files in Documentation/ that currently lack one. This is done for a few different reasons: A) It's rather annoying when you do "cat some_file.txt" that your prompt/cursor ends up at the end of the last line of output rather than on a new line. B) Some tools that process files line-by-line may get confused by the lack of a newline on the last line. C) The "\ No newline at end of file" line in diffs annoys me for some reason. So, let's just add the missing newline once and for all. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-20Viresh has movedViresh Kumar
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-22Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull device tree conversions for arm-soc, part 1, from Olof Johansson: "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of booting using device trees, which is a great step forward for them. at91 and spear have pretty much completed this process with a huge amount of work being put into at91. The other platforms are continuing the process. We finally start to see the payback on this investment, as new machines are getting supported purely by adding a .dts source file that can be completely independent of the kernel source." Fix up trivial conflict in arch/arm/Kconfig * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files arm/dts: omap4-panda: Add LEDs support arm/dts: omap4-sdp: Add LEDs support arm/dts: twl4030: Add twl4030-gpio node OMAP4: devices: Do not create mcpdm device if the dtb has been provided OMAP4: devices: Do not create dmic device if the dtb has been provided Documentation: update docs for mmp dt ARM: dts: refresh dts file for arch mmp ARM: mmp: support pxa910 with device tree ARM: mmp: support mmp2 with device tree gpio: pxa: parse gpio from DTS file ARM: mmp: support DT in timer ARM: mmp: support DT in irq ARM: mmp: append CONFIG_MACH_MMP2_DT ARM: mmp: fix build issue on mmp with device tree ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball ARM: SPEAr3xx: Correct keyboard data passed from DT ...
2012-05-14SPEAr: Update MAINTAINERS and DocumentationViresh Kumar
This patchset updates MAINTAINERS files, makes shiraz as second Maintainer for SPEAr SoCs. It also updates Documentation mostly for SPEAr13xx. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-05-11OMAPDSS: Provide an interface for audio supportRicardo Neri
There exist several display technologies and standards that support audio as well. Hence, it is relevant to update the DSS device driver to provide an audio interface that may be used by an audio driver or any other driver interested in the functionality. The audio_enable function is intended to prepare the relevant IP for playback (e.g., enabling an audio FIFO, taking in/out of reset some IP, enabling companion chips, etc). It is intended to be called before audio_start. The audio_disable function performs the reverse operation and is intended to be called after audio_stop. While a given DSS device driver may support audio, it is possible that for certain configurations audio is not supported (e.g., an HDMI display using a VESA video timing). The audio_supported function is intended to query whether the current configuration of the display supports audio. The audio_config function is intended to configure all the relevant audio parameters of the display. In order to make the function independent of any specific DSS device driver, a struct omap_dss_audio is defined. Its purpose is to contain all the required parameters for audio configuration. At the moment, such structure contains pointers to IEC-60958 channel status word and CEA-861 audio infoframe structures. This should be enough to support HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. The omap_dss_audio structure may be extended in the future if required. The audio_enable/disable, audio_config and audio_supported functions could be implemented as functions that may sleep. Hence, they should not be called while holding a spinlock or a readlock. The audio_start/audio_stop function is intended to effectively start/stop audio playback after the configuration has taken place. These functions are designed to be used in an atomic context. Hence, audio_start should return quickly and be called only after all the needed resources for audio playback (audio FIFOs, DMA channels, companion chips, etc) have been enabled to begin data transfers. audio_stop is designed to only stop the audio transfers. The resources used for playback are released using audio_disable. A new enum omap_dss_audio_state is introduced to help the implementations of the interface to keep track of the audio state. The initial state is _DISABLED; then, the state transitions to _CONFIGURED, and then, when it is ready to play audio, to _ENABLED. The state _PLAYING is used when the audio is being rendered. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11OMAPDSS: VENC: allow switching venc output type at runtimeGrazvydas Ignotas
VENC output type (composite/svideo) doesn't have to be fixed by board wiring, it is possible to also provide composite signal through svideo luminance connector (software enabled), which is what pandora does. Having to recompile the kernel for users who have TV connector types that don't match default board setting is very inconvenient, especially for users of a consumer device, so add support for switching VENC output type at runtime over a new sysfs file output_type. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-04-22ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architectureViresh Kumar
This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-04-06ARM: remove ixp23xx and ixp2000 platformsRob Herring
ixp2xxx platforms have had no real changes since ~2006 and the maintainer has said on irc that they can be removed: 13:05 < nico> do you still care about ixp2000? 13:22 < lennert> not really, no 13:58 < nico> do you think we could remove it from the kernel tree? 14:01 < lennert> go for it, and remove ixp23xx too while you're at it Removing will help simplify ARM consolidation in general and PCI re-work specifically. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2012-03-07Documentation: Fix multiple typo in DocumentationMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-26ARM: move iotable mappings within the vmalloc regionNicolas Pitre
In order to remove the build time variation between different SOCs with regards to VMALLOC_END, the iotable mappings are now allocated inside the vmalloc region. This allows for VMALLOC_END to be identical across all machines. The value for VMALLOC_END is now set to 0xff000000 which is right where the consistent DMA area starts. To accommodate all static mappings on machines with possible highmem usage, the default vmalloc area size is changed to 240 MB so that VMALLOC_START is no higher than 0xf0000000 by default. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Jamie Iles <jamie@jamieiles.com>
2011-07-25Merge branch 'next/deletion' of ↵Linus Torvalds
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-loki: delete ARM: mach-s3c2400: delete ARM: mach-s3c24a0: delete
2011-07-22Merge branch 'devel-stable' into for-nextRussell King
Conflicts: arch/arm/kernel/entry-armv.S
2011-07-19ARM: 6999/1: head, zImage: Always Enter the kernel in ARM stateDave Martin
Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-18ARM: mach-s3c2400: deleteNicolas Pitre
On Tue, 28 Jun 2011, Ben Dooks wrote: > On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote: > > > On a related note, what about mach-s3c2400? It seems to be even more > > incomplete. > > Probably the same fate awaits that. It is so old that there's little > incentive to do anything with it. So out it goes as well. The PORT_S3C2400 definition in include/linux/serial_core.h is left there to prevent a reuse of the same number for another port type. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-06-29ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARMSimon Horman
This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <magnus.damm@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-28ARM: add a kuser_cmpxchg64 user space helperNicolas Pitre
Some user space applications are designed around the ability to perform atomic operations on 64 bit values. Since this is natively possible only with ARMv6k and above, let's provide a new kuser helper to perform the operation with kernel supervision on pre ARMv6k hardware. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Dave Martin <dave.martin@linaro.org>
2011-06-20ARM: kuser: move interface documentation out of the source codeNicolas Pitre
Digging into some assembly file in order to get information about the kuser helpers is not that convivial. Let's move that information to a better formatted file in Documentation/arm/ and improve on it a bit. Thanks to Dave Martin <dave.martin@linaro.org> for the initial cleanup and clarifications. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Dave Martin <dave.martin@linaro.org>
2011-05-25Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-23dt: add documentation of ARM dt boot interfaceGrant Likely
v6: typo fixes v5: clarified that dtb should be aligned on a 64 bit boundary in RAM. v3: added details to Documentation/arm/Booting Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-12ARM: S5P6442: Removing ARCH_S5P6442Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-16Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 ARM: lh7a40x: remove unmaintained platform support Fix up trivial conflicts in - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed) - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
2011-01-25ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARMSimon Horman
This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm <magnus.damm@gmail.com> Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-24ARM: lh7a40x: remove unmaintained platform supportRussell King
lh7a40x has only been receiving updates for updates to generic code. The last involvement from the maintainer according to the git logs was in 2006. As such, it is a maintainence burden with no benefit. This gets rid of two defconfigs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-06Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-06Merge branch 'smp' into miscRussell King
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/mm/ioremap.c
2010-12-21omap: opp: add OMAP3 OPP table data and common initNishanth Menon
Add OPP data for OMAP34xx and OMAP36xx and initialization functions to populate OPP tables based on current SoC. introduce an OMAP generic opp initialization routine which OMAP3 and OMAP4+ SoCs can use to register their OPP definitions. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-10OMAP: DSS: Fix documentation regarding 'vram' kernel parameterTomi Valkeinen
The DSS documentation didn't mention the option to give the VRAM start address. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04ARM: 6396/1: Add SWP/SWPB emulation for ARMv7 processorsLeif Lindholm
The SWP instruction was deprecated in the ARMv6 architecture, superseded by the LDREX/STREX family of instructions for load-linked/store-conditional operations. The ARMv7 multiprocessing extensions mandate that SWP/SWPB instructions are treated as undefined from reset, with the ability to enable them through the System Control Register SW bit. This patch adds the alternative solution to emulate the SWP and SWPB instructions using LDREX/STREX sequences, and log statistics to /proc/cpu/swp_emulation. To correctly deal with copy-on-write, it also modifies cpu_v7_set_pte_ext to change the mappings to priviliged RO when user RO. Signed-off-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-06msm: documentation: add gpiomux documentation.Gregory Bean
Signed-off-by: Gregory Bean <gbean@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-08-10Doc: Fix spellingStefan Weil
Legned -> Legend mainatined -> maintained Legend is now Lenovo, so more fixes (text and url) would be possible, too. Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04Documentation: update broken web addresses.Justin P. Mattock
Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-27ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-28ARM: SAMSUNG: Documentation: add documentation on GPIO codeBen Dooks
Add some documentation in Documentation/arm/Samsung for the GPIO code and where to look for the necessary functions. Update the S3C24XX case as well. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: add section on gpiolib changesBen Dooks
Add section to the S3C24XX GPIO documentation on the recent changes to move towards gpiolib integration. Signed-off-by: Ben Dooks <ben-linux@fluff.org>