summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)Author
2014-08-14Merge tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "Me and Chris Ball decided to try out using my MMC tree as the primary one, to simplify handling of patches. This pull does thus contains all the MMC patches for 3.17 rc1, no pull from Chris this time. Details: MMC core: - forward compatibility for eMMC - fix some blacklisted cards with broken secure discard MMC host: - mmci: Add support for Qualcomm variant - mmci: Fix regression for arm_variant - sdhci: Various fixes and cleanups - sdhci: Improve external VDD regulator support - sdhci: Support for DDR50 1.8V mode for BayTrail - sdhci-st: Add driver for ST SDHCI controller - sh-mmcif: DMA fixes - omap_hsmmc: Add support for SDIO interrupts - sdhci-pci: Add support for Intel Quark X1000 - dw_mmc: Update the reset sequence - s3cmci: port DMA code to dmaengine API" * tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits) mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed mmc: dw_mmc: Slot quirk "disable-wp" is deprecated. mmc: mmci: Reverse IRQ handling for the arm_variant mmc: mmci: Move all CMD irq handling to mmci_cmd_irq() mmc: mmci: Remove redundant check of status for DATA irq mmc: dw_mmc: change to use recommended reset procedure mmc: sdhci-pxav3: Use devm_* managed helpers mmc: tmio: Configure DMA slave bus width mmc: sh_mmcif: Configure DMA slave bus width mmc: sh_mmcif: Fix DMA slave address configuration mmc: sh_mmcif: Document DT bindings mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback mmc: Do not advertise secure discard if it is blacklisted mmc: sdhci-msm: Get COMPILE_TEST support mmc: sdhci-msm: Remove unnecessary header file inclusion mmc: sdhci-msm: Fix the binding example mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller mmc: sdhci: Preset value not supported in Baytrail eMMC mmc: MMC_USDHI6ROL0 should depend on HAS_DMA mmc: MMC_SH_MMCIF should depend on HAS_DMA ...
2014-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several networking final fixes and tidies for the merge window: 1) Changes during the merge window unintentionally took away the ability to build bluetooth modular, fix from Geert Uytterhoeven. 2) Several phy_node reference count bug fixes from Uwe Kleine-König. 3) Fix ucc_geth build failures, also from Uwe Kleine-König. 4) Fix klog false positivies when netlink messages go to network taps, by properly resetting the network header. Fix from Daniel Borkmann. 5) Sizing estimate of VF netlink messages is too small, from Jiri Benc. 6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian. 7) VLAN untagging is erroneously dependent upon whether the VLAN module is loaded or not, but there are generic dependencies that matter wrt what can be expected as the SKB enters the stack. Make the basic untagging generic code, and do it unconditionally. From Vlad Yasevich. 8) xen-netfront only has so many slots in it's transmit queue so linearize packets that have too many frags. From Zoltan Kiss. 9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits) net: bcmgenet: correctly resume adapter from Wake-on-LAN net: bcmgenet: update UMAC_CMD only when link is detected net: bcmgenet: correctly suspend and resume PHY device net: bcmgenet: request and enable main clock earlier net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call xen-netfront: Fix handling packets on compound pages with skb_linearize net: fec: Support phys probed from devicetree and fixed-link smsc: replace WARN_ON() with WARN_ON_SMP() xen-netback: Don't deschedule NAPI when carrier off net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile wan: wanxl: Remove typedefs from struct names m68k/atari: EtherNEC - ethernet support (ne) net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call hdlc: Remove typedefs from struct names airo_cs: Remove typedef local_info_t atmel: Remove typedef atmel_priv_ioctl com20020_cs: Remove typedef com20020_dev_t ethernet: amd: Remove typedef local_info_t net: Always untag vlan-tagged traffic on input. drivers: net: Add APM X-Gene SoC ethernet driver support. ...
2014-08-11net: fec: Support phys probed from devicetree and fixed-linkUwe Kleine-König
This adds support for specifying the phy to be used with the fec in the devicetree using the standard phy-handle property and also supports fixed-link. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11Documentation: dts: Add bindings for APM X-Gene SoC ethernet driverIyappan Subramanian
This patch adds documentation for APM X-Gene SoC ethernet DTS binding. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Ravi Patel <rapatel@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...
2014-08-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: "Specifics: - adds full support for 2 types of Thermal Controllers produced by STMicroelectronics. One is a more traditional memory mapped variant, the other is controlled solely by system configuration registers. From Lee Jones. - add TMU (Thermal Management Unit) support for Exynos3250 Soc. From Chanwoo Choi. - add critical and passive trip point support for int3403 thermal driver. From Srinivas Pandruvada. - a couple of small fixes/cleanups from Javi Merino, and Geert Uytterhoeven" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: document struct thermal_zone_device and thermal_governor thermal: cpu_cooling: fix typo highjack -> hijack thermal: rcar: Document SoC-specific bindings thermal: samsung: Add TMU support for Exynos3250 SoC thermal: exynos: fix ordering in exynos_tmu_remove() thermal: allow building dove_thermal with mvebu thermal: sti: Add support for ST's Memory Mapped based Thermal controller thermal: sti: Add support for ST's System Config Register based Thermal controller thermal: sti: Introduce ST Thermal core code thermal: sti: Supply Device Tree documentation Thermal: int3403: Add CRT and PSV trip
2014-08-11mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeedJaehoon Chung
Almost all SoCs use one slot per host controller. (Even if controller can support the multiple slot, Recommend to use one slot per host controller.) Don't use the slot-node and deprecate the "supports-highspeed" property. Instead, use the cap-mmc/sd-highspeed. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tushar Behera <trblinux@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-09Merge branch 'i2c/for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - class based instantiation finally dropped for most embedded drivers bringing boot up performance gains - removed two drivers (one outdated, one a duplicate) - ACPI has now operation region support (thanks to Lan Tianyu) - the i2c-stub driver got overhauled and gained new features to become more useful when writing i2c client drivers (thanks to Guenter Roeck and Jean Delvare) The rest is driver bugfixes, added bindings/ids, cleanups..." * 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits) i2c: mpc: delete unneeded test before of_node_put i2c: rk3x: fix interrupt handling issue i2c: imx: Fix format warning for dev_dbg i2c: qup: disable clks and return instead of just returning error i2c: exynos5: always enable HSI2C i2c: designware: add new bindings i2c: gpio: Drop dead code in i2c_gpio_remove i2c: pca954x: put the mux to disconnected state after resume i2c: st: Update i2c timings drivers/i2c/busses: use correct type for dma_map/unmap i2c: i2c-st: Use %pa to print 'resource_size_t' type i2c: s3c2410: resume the I2C controller earlier i2c: stub: Avoid an array overrun on I2C block transfers i2c: i801: Add device ID for Intel Wildcat Point PCH i2c: i801: Fix the alignment of the device table i2c: stub: Add support for banked register ranges i2c: stub: Remember the number of emulated chips i2c: stub: Add support for SMBus block commands i2c: efm32: correct namespacing of location property i2c: exynos5: remove extra line and fix an assignment ...
2014-08-08Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "AMD-compatible CFI driver: - Support OTP programming for Micron M29EW family - Increase buffer write timeout, according to detected flash parameter info NAND - Add helpers for retrieving ONFI timing modes - GPMI: provide option to disable bad block marker swapping (required for Ka-On electronics platforms) SPI NOR - EON EN25QH128 support - Support new Flag Status Register (FSR) on a few Micron flash Common - New sysfs entries for bad block and ECC stats And a few miscellaneous refactorings, cleanups, and driver improvements" * tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits) mtd: gpmi: make blockmark swapping optional mtd: gpmi: remove line breaks from error messages and improve wording mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables mtd: atmel_nand: NFC: support multiple interrupt handling mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit mtd: atmel_nand: add NFC status error check mtd: atmel_nand: make ecc parameters same as definition mtd: nand: add ONFI timing mode to nand_timings converter mtd: nand: define struct nand_timings mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error mtd: denali: use 8 bytes for READID command mtd/ftl: fix the double free of the buffers allocated in build_maps() mtd: phram: Fix whitespace issues mtd: spi-nor: add support for EON EN25QH128 mtd: cfi_cmdset_0002: Add support for locking OTP memory mtd: cfi_cmdset_0002: Add support for writing OTP memory mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory mtd: cfi_cmdset_0002: Add support for reading OTP mtd: spi-nor: add support for flag status register on Micron chips mtd: Account for BBT blocks when a partition is being allocated ...
2014-08-08Merge tag 'fbdev-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - much better HDMI infoframe support for OMAP - Cirrus Logic CLPS711X framebuffer driver - DT support for PL11x CLCD driver - various small fixes * tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: DSI: fix depopulating dsi peripherals video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic video: ARM CLCD: Fix DT-related build problems drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM. video: ARM CLCD: Add DT support drm/omap: Add infoframe & dvi/hdmi mode support OMAPDSS: HDMI: remove the unused code OMAPDSS: HDMI5: add support to set infoframe & HDMI mode OMAPDSS: HDMI4: add support to set infoframe & HDMI mode OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015 OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver OMAPDSS: HDMI: remove custom avi infoframe OMAPDSS: HDMI5: use common AVI infoframe support OMAPDSS: HDMI4: use common AVI infoframe support OMAPDSS: Kconfig: select HDMI OMAPDSS: HDMI: fix name conflict OMAPDSS: DISPC: clean up dispc_mgr_timings_ok OMAPDSS: DISPC: reject interlace for lcd out OMAPDSS: DISPC: fix debugfs reg dump ...
2014-08-08Merge tag 'pwm/for-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The set of changes for this merge window contains two new drivers: one for Rockchip SoCs and another for STMicroelectronics STiH4xx SoCs. The remainder of the changes are the usual small cleanups such as removing redundant OOM messages, signalling that a PWM chip's operations can sleep and removing an unneeded dependency" * tag 'pwm/for-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: rockchip: Added to support for RK3288 SoC pwm: rockchip: document RK3288 SoC compatible pwm: sti: Remove PWM period table pwm: sti: Sync between enable/disable calls pwm: sti: Ensure same period values for all channels pwm: sti: Fix PWM prescaler handling pwm: sti: Supply Device Tree binding documentation for ST's PWM IP pwm: sti: Add new driver for ST's PWM IP pwm: imx: set can_sleep flag for imx_pwm pwm: lpss: remove dependency on clk framework pwm: pwm-tipwmss: remove unnecessary OOM messages pwm: rockchip: document device tree bindings pwm: add Rockchip SoC PWM support
2014-08-08Merge tag 'gpio-v3.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO update from Linus Walleij: "This is the bulk of GPIO changes for the v3.17 development cycle, and this time we got a lot of action going on and it will continue: - The core GPIO library implementation has been split up in three different files: - gpiolib.c for the latest and greatest and shiny GPIO library code using GPIO descriptors only - gpiolib-legacy.c for the old integer number space API that we are phasing out gradually - gpiolib-sysfs.c for the sysfs interface that we are not entirely happy with, but has to live on for ABI compatibility - Add a flags argument to *gpiod_get* functions, with some backward-compatibility macros to ease transitions. We should have had the flags there from the beginning it seems, now we need to clean up the mess. There is a plan on how to move forward here devised by Alexandre Courbot and Mark Brown - Split off a special <linux/gpio/machine.h> header for the board gpio table registration, as per example from the regulator subsystem - Start to kill off the return value from gpiochip_remove() by removing the __must_check attribute and removing all checks inside the drivers/gpio directory. The rationale is: well what were we supposed to do if there is an error code? Not much: print an error message. And gpiolib already does that. So make this function return void eventually - Some cleanups of hairy gpiolib code, make some functions not to be used outside the library private and make sure they are not exported, remove gpiod_lock/unlock_as_irq() as the existing function is for driver-internal use and fine as it is, delete gpio_ensure_requested() as it is not meaningful anymore - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function calls, which is logical since this is already supported when referencing GPIOs from e.g. device trees - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib irqchip helpers cutting down on GPIO irqchip boilerplate a bit more - New driver for the Zynq GPIO block - The usual incremental improvements around a bunch of drivers - Janitorial syntactic and semantic cleanups by Jingoo Han, and Rickard Strandqvist especially" * tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits) MAINTAINERS: update GPIO include files gpio: add missing includes in machine.h gpio: add flags argument to gpiod_get*() functions MAINTAINERS: Update Samsung pin control entry gpio / ACPI: Move event handling registration to gpiolib irqchip helpers gpio: lynxpoint: Convert to use gpiolib irqchip gpio: split gpiod board registration into machine header gpio: remove gpio_ensure_requested() gpio: remove useless check in gpiolib_sysfs_init() gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc gpio: move gpio_ensure_requested() into legacy C file gpio: remove gpiod_lock/unlock_as_irq() gpio: make gpiochip_get_desc() gpiolib-private gpio: simplify gpiochip_export() gpio: remove export of private of_get_named_gpio_flags() gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions gpio: zynq: Clear pending interrupt when enabling a IRQ gpio: drop retval check enforcing from gpiochip_remove() gpio: remove all usage of gpio_remove retval in driver/gpio devicetree: Add Zynq GPIO devicetree bindings documentation ...
2014-08-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
2014-08-08Merge branch 'akpm' (second patchbomb from Andrew Morton)Linus Torvalds
Merge more incoming from Andrew Morton: "Two new syscalls: memfd_create in "shm: add memfd_create() syscall" kexec_file_load in "kexec: implementation of new syscall kexec_file_load" And: - Most (all?) of the rest of MM - Lots of the usual misc bits - fs/autofs4 - drivers/rtc - fs/nilfs - procfs - fork.c, exec.c - more in lib/ - rapidio - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs, fs/cramfs, fs/romfs, fs/qnx6. - initrd/initramfs work - "file sealing" and the memfd_create() syscall, in tmpfs - add pci_zalloc_consistent, use it in lots of places - MAINTAINERS maintenance - kexec feature work" * emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits) MAINTAINERS: update nomadik patterns MAINTAINERS: update usb/gadget patterns MAINTAINERS: update DMA BUFFER SHARING patterns kexec: verify the signature of signed PE bzImage kexec: support kexec/kdump on EFI systems kexec: support for kexec on panic using new system call kexec-bzImage64: support for loading bzImage using 64bit entry kexec: load and relocate purgatory at kernel load time purgatory: core purgatory functionality purgatory/sha256: provide implementation of sha256 in purgaotory context kexec: implementation of new syscall kexec_file_load kexec: new syscall kexec_file_load() declaration kexec: make kexec_segment user buffer pointer a union resource: provide new functions to walk through resources kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc() kexec: move segment verification code in a separate function kexec: rename unusebale_pages to unusable_pages kernel: build bin2c based on config option CONFIG_BUILD_BIN2C bin2c: move bin2c in scripts/basic shm: wait for pins to be released when sealing ...
2014-08-08rtc: add pcf85063 supportSøren Andersen
Add support for the pcf85063 rtc chip. [akpm@linux-foundation.org: fix comment typo, tweak conding style] Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08Merge tag 'drivers-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-08-08Merge tag 'dt-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-08pwm: rockchip: document RK3288 SoC compatibleCaesar Wang
Document new compatible for PWM founding on RK3288 SoC Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ...
2014-08-07Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED updates from Bryan Wu: "This cycle we got: - a fix of attribute-creation race for the whole leds subsystem - new drivers (HID:GT683R, leds-ipaq-micro) - other fixing and clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits) leds: ipaq-micro: fix sparse non static symbol warning leds: add driver for the iPAQ micro Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells leds: convert blink timer to workqueue leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default leds:pca963x: Always initialize MODE2 register leds:pca963x: Add support for PCA9635 LED driver chip HID: gt683r: move mode attribute to led-class devices HID: gt683r: fix race condition HID: add support for MSI GT683R led panels leds: lp55xx-common: fix attribute-creation race leds: lp55xx-common: fix sysfs entry leak input: lm8323: fix attribute-creation race leds: wm831x-status: fix attribute-creation race leds: ss4200: fix attribute-creation race leds: ns2: fix attribute-creation race leds: netxbig: fix attribute-creation race leds: max8997: fix attribute-creation race leds: lm3642: fix attribute-creation race leds: lm355x: fix attribute-creation race ...
2014-08-07Merge tag 'pinctrl-v3.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "This is the bulk pin control changes for the v3.17 merge development cycle: - get rid of the .disable() callback from the driver callback vtable. This callback was abused and counterintuitive since a pin or group of pins can be said to always be in some setting, and never really disabled. We now only enable a certain muxing, and move between some certain muxings, we never "disable" a mux setting - some janitorial moving the MSM, Samsung and Nomadik and drivers to their own subdirectories for a clearer view in the subsystem. This will continue - kill off the use of the return value from gpiochip_remove(), this will be done in parallel in the GPIO subsystem and hopefully not trigger too many unchecked return value warnings before we get rid of this altogether - a huge set of changes and improvements to the Allwinner sunxi drivers especially for their latest A23 and A31 SoCs, and some ground work for the new sun8i platform family - a large set of Rockchip driver improvements adding support for the RK3288 SoC - advances in migration of older Freescale platforms to pin control, especially i.MX1 - Samsung and Exynos improvements - support for the Qualcomm MSM8960 SoC - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail drivers - a bunch of nice janitorial work done with cppcheck" * tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits) pinctrl: baytrail: Convert to use gpiolib irqchip pinctrl: sunxi: number gpio ranges starting from 0 pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ pinctrl: rockchip: add drive-strength control for rk3288 pinctrl: rockchip: add separate type for rk3288 pinctrl: rockchip: set is_generic in pinconf_ops pinctrl: msm: drop negativity check on unsigned value pinctrl: remove all usage of gpio_remove ret val in driver/pinctl pinctrl: qcom: Make muxing of gpio function explicit pinctrl: nomadik: move all Nomadik drivers to subdir pinctrl: samsung: Group all drivers in a sub-dir sh-pfc: sh73a0: Introduce the use of devm_regulator_register sh-pfc: Add renesas,pfc-r8a7791 to binding documentation pinctrl: msm: move all qualcomm drivers to subdir pinctrl: msm: Add msm8960 definitions pinctrl: samsung: Allow pin value to be initialized using pinfunc pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs pinctrl: samsung: Handle GPIO request and free using pinctrl helpers pinctrl: samsung: Decouple direction setting from pinctrl ...
2014-08-07Merge tag 'mfd-for-linus-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD update from Lee Jones: "Changes to existing drivers: - checkpatch fixes throughout the subsystem - use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core - use DMA in rtsx_pcr - restrict building on unsupported architectures on timberdale, cs5535 - SPI hardening in cros_ec_spi - more robust error handing in asic3, cros_ec, ab8500-debugfs, max77686 and pcf50633-core - reorder PM runtime and regulator handing during shutdown in arizona - enable wakeup in cros_ec_spi - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld, tps65912-spi, wm5110-tables and ab8500-debugfs - add regulator handing into suspend() in sec-core - remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel - use cross-architecture friendly data sizes in stmpe-i2c, arizona, max77686 and tps65910 - devicetree documentation updates throughout - provide power management support in max77686 - few OF clean-ups in max77686 - use manged resources in tps6105x New drivers/supported devices: - add support for s2mpu02 to sec-core - add support for Allwinner A32 to sun6i-prcm - add support for Maxim 77802 in max77686 - add support for DA9063 AD in da9063 - new driver for Intel PMICs (generic) and specifically Crystal Cove (Re-)moved drivers == - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb" * tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits) MAINTAINERS: Update MFD repo location mfd: omap-usb-host: Fix improper mask use. mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it mfd: arizona: Add missing handling for ISRC3 under/overclocked mfd: wm5110: Add new interrupt register definitions mfd: arizona: Rename thermal shutdown interrupt mfd: wm5110: Add in the output done interrupts mfd: wm5110: Remove non-existant interrupts mfd: tps65912-spi: Remove unused variable mfd: htc-i2cpld: Remove unused code mfd: da9063: Add support for AD silicon variant mfd: arizona: Map MICVDD from extcon device to the Arizona core mfd: arizona: Add MICVDD to mapped regulators for wm8997 mfd: max77686: Ensure device type IDs are architecture agnostic mfd: max77686: Add Maxim 77802 PMIC support mfd: tps6105x: Use managed resources when allocating memory mfd: wm8997-tables: Suppress 'line over 80 chars' warnings mfd: kempld-core: Correct a variety of checkpatch warnings mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch mfd: si476x-cmd: Remedy checkpatch style complains ...
2014-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...
2014-08-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-08-07pwm: sti: Supply Device Tree binding documentation for ST's PWM IPLee Jones
Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-07Merge tag 'drm/panel/for-3.17-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v3.17-rc1 Panels can now be more finely controlled via .prepare() and .unprepare() callbacks in addition to .enable() and .disable(). New kerneldoc details what they are supposed to do and when they should be called. The simple panel driver gained support for a couple of new panels and it is now possible to specify additional delays during power up and power down sequences if panels require it. DSI devices can now advertise that they support non-continuous clock mode which will allow DSI host controllers to disable the high speed clock after transmissions to save power. * tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: (30 commits) drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible drm/panel: simple: Add Innolux N116BGE panel support ...
2014-08-06Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - remove unnecessary checks after platform_get_resource() - fix watchdog api documentation typo's - imx2_wdt: adds big endianness support - move restart code to the sunxi watchdog driver * git://www.linux-watchdog.org/linux-watchdog: wdt: sunxi: Move restart code to the watchdog driver Documentation: fix two typos in watchdog-api.txt watchdog: imx2_wdt: adds big endianness support. watchdog: shwdt: Remove the unnecessary check of resource after platform_get_resource() watchdog: lantiq_wdt: Remove the un-necessary check of resource after platform_get_resource() watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()
2014-08-06Merge tag 'sound-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There've been many updates in ASoC side at this time, especially the framework enhancement for multiple CODECs on a single DAI and more componentization works. The only major change in ALSA core is the addition of timestamp type in sw_params field. This should behave in backward compatible way. Other than that, there are lots of small changes and new drivers in wide range, including a large code cut in HD-audio driver for deprecated static quirks. Some highlights are below: ALSA Core: - Add the new timestamp type field to sw_params to choose MONOTONIC_RAW type HD-audio: - Continued conversion to standard printk macros, generic code cleanups - Removal of obsoleted static quirk codes for Conexant and C-Media codecs - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED, Gigabyte BXBT-2807 mobo - Intel Braswell support ASoC: - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah - More componentisation work from Lars-Peter Clausen - The remainder of the conversions of CODEC drivers to params_width() by Mark Brown - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552 - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers" * tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits) ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.* ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata sound/oss/opl3: Remove typedef opl_devinfo ALSA: fireworks: fix specifiers in format strings for propper output ASoC: imx-audmux: Use uintptr_t for port numbers ASoC: davinci: Enable menuconfig entry for McASP ASoC: fsl_asrc: Don't access members of config before checking it ASoC: fsl_sarc_dma: Check pair before using it ASoC: adau1977: Fix truncation warning on 64 bit architectures ALSA: virtuoso: add Xonar Essence STX II support ALSA: riptide: fix %d confusingly prefixed with 0x in format strings ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings ALSA: hda - add codec ID for Braswell display audio codec ALSA: hda - add PCI IDs for Intel Braswell ALSA: usb-audio: Adjust Gamecom 780 volume level ALSA: usb-audio: improve dmesg source grepability ASoC: rt5670: Fix duplicate const warnings ASoC: rt5670: Staticise non-exported symbols ASoC: Intel: update stream only on stream IPC msgs ...
2014-08-06Merge tag 'for-v3.17' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull power supply changes from Sebastian Reichel: - Added iPaq h3xxx battery driver - Added Broadcom STB reset driver - DT support for rx51-battery - misc. fixes * tag 'for-v3.17' of git://git.infradead.org/battery-2.6: ipaq_micro_battery: fix sparse non static symbol warning power: add driver for battery reading on iPaq h3xxx power: twl4030_charger: detect battery presence prior to enabling charger power: reset: Add reboot driver for brcmstb power_supply: Fix sparse non static symbol warning power_supply: Add inlmt,iterm, min/max temp props charger: tps65090: Allow charger module to be used when no irq power/reset: Fix GPL v2 license string typo power: poweroff: gpio: convert to use descriptors bq27000: report missing device better. bq27x00_battery: Introduce the use of the managed version of kzalloc Documentation: DT: Document rx51-battery binding rx51_battery: convert to iio consumer bq2415x_charger: Fix Atomic Sleep Bug
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-06drm/panel: simple: Add AUO B133HTN01 panel supportAjay Kumar
The AUO B133HTN01 is a 13.6" FHD TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. This panel is used on the Samsung Chromebook 2 (XE503C32). Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/panel: simple: Add Innolux N116BGE panel supportThierry Reding
The Innolux N116BGE is an 11.6" WXGA TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. It is used in the Tegra132 Norrin reference design. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-08-05Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Nothing spectacular from the irq department this time: - overhaul of the crossbar chip driver - overhaul of the spear shirq chip driver - support for the atmel-aic chip - code move from arch to drivers - the usual tiny fixlets - two reverts worth to mention which undo the too simple attempt of supporting wakeup interrupts on shared interrupt lines" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) Revert "irq: Warn when shared interrupts do not match on NO_SUSPEND" Revert "PM / sleep / irq: Do not suspend wakeup interrupts" irq: Warn when shared interrupts do not match on NO_SUSPEND irqchip: atmel-aic: Define irq fixups for atmel SoCs irqchip: atmel-aic: Implement RTC irq fixup irqchip: atmel-aic: Add irq fixup infrastructure irqchip: atmel-aic: Add atmel AIC/AIC5 drivers irqchip: atmel-aic: Move binding doc to interrupt-controller directory genirq: generic chip: Export irq_map_generic_chip function PM / sleep / irq: Do not suspend wakeup interrupts irqchip: or1k-pic: Migrate from arch/openrisc/ irqchip: crossbar: Allow for quirky hardware with direct hardwiring of GIC documentation: dt: omap: crossbar: Add description for interrupt consumer irqchip: crossbar: Introduce centralized check for crossbar write irqchip: crossbar: Introduce ti, max-crossbar-sources to identify valid crossbar mapping irqchip: crossbar: Add kerneldoc for crossbar_domain_unmap callback irqchip: crossbar: Set cb pointer to null in case of error irqchip: crossbar: Change the goto naming irqchip: crossbar: Return proper error value irqchip: crossbar: Fix kerneldoc warning ...
2014-08-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of sn9c102. This device driver was replaced a long time ago by gspca - solo6x10 and go7007 webcam drivers moved from staging into mainstream. They were waiting for an API to allow setting the image detection matrix - SDR drivers moved from staging into mainstream: sdr-msi3101 (renamed as msi2500) and rtl2832 - added SDR driver for airspy - added demux driver: si2165 - rework at several RC subsystem, making the code for RC-5 SZ variant to be added at the standard RC5 decoder - added decoder for the XMP IR protocol - tuner driver moved from staging into mainstream: msi3101 (renamed as msi001) - added documentation for some additional SDR pixfmt - some device tree bindings documented - added support for exynos3250 at s5p-jpeg - remove the obsolete, unmaintained and broken mx1_camera driver - added support for remote controllers at au0828 driver - added a RC driver: sunxi-cir - several driver fixes, enhancements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (455 commits) [media] cx23885: fix UNSET/TUNER_ABSENT confusion [media] coda: fix build error by making reset control optional [media] radio-miropcm20: fix sparse NULL pointer warning [media] MAINTAINERS: Update go7007 pattern [media] MAINTAINERS: Update solo6x10 patterns [media] media: atmel-isi: add primary DT support [media] media: atmel-isi: convert the pdata from pointer to structure [media] media: atmel-isi: add v4l2 async probe support [media] rcar_vin: add devicetree support [media] media: pxa_camera device-tree support [media] media: mt9m111: add device-tree suppport [media] soc_camera: add support for dt binding soc_camera drivers [media] media: soc_camera: pxa_camera documentation device-tree support [media] media: mt9m111: add device-tree documentation [media] s5p-mfc: remove unnecessary calling to function video_devdata() [media] s5p-jpeg: add chroma subsampling adjustment for Exynos3250 [media] s5p-jpeg: Prevent erroneous downscaling for Exynos3250 SoC [media] s5p-jpeg: Assure proper crop rectangle initialization [media] s5p-jpeg: fix g_selection op [media] s5p-jpeg: Adjust jpeg_bound_align_image to Exynos3250 needs ...
2014-08-05Merge tag 'regulator-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of nice new features this month, the ability to map regulators in order to allow voltage control by external coprocessors is something people have been asking for for a long time. - improved support for switch only "regulators", allowing current state to be read from the parent regulator but no setting. - support for obtaining the register access method used to set voltages, for use in systems which can offload control of this to a coprocessor (typically for DVFS). - support for Active-Semi AC8846, Dialog DA9211 and Texas Instruments TPS65917" * tag 'regulator-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (58 commits) regulator: act8865: fix build when OF is not enabled regulator: act8865: add act8846 to DT binding documentation regulator: act8865: add support for act8846 regulator: act8865: prepare support for other act88xx devices regulator: act8865: set correct number of regulators in pdata regulator: act8865: Remove error variable in act8865_pmic_probe regulator: act8865: fix parsing of platform data regulator: tps65090: Set voltage for fixed regulators regulator: core: Allow to get voltage count and list from parent regulator: core: Get voltage from parent if not available regulator: Add missing statics and inlines for stub functions regulator: lp872x: Don't set constraints within the regulator driver regmap: Fix return code for stub regmap_get_device() regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support regulator: Add helpers for low-level register access regmap: Allow regmap_get_device() to be used by modules regmap: Add regmap_get_device regulator: da9211: Remove unnecessary devm_regulator_unregister() calls regulator: Add DT bindings for tps65218 PMIC regulators. regulator: da9211: new regulator driver ...
2014-08-05Merge tag 'spi-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A quiet release, more bug fixes than anything else. A few things do stand out though: - updates to several drivers to move towards the standard GPIO chip select handling in the core. - DMA support for the SH MSIOF driver. - support for Rockchip SPI controllers (their first mainline submission)" * tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device spi: davinci: add support to configure gpio cs through dt spi/pl022: Explicitly truncate large bitmask spi/atmel: Fix pointer to int conversion warnings on 64 bit builds spi: davinci: fix to support more than 2 chip selects spi: topcliff-pch: don't hardcode PCI slot to get DMA device spi: orion: fix incorrect handling of cell-index DT property spi: orion: Fix error return code in orion_spi_probe() spi/rockchip: fix error return code in rockchip_spi_probe() spi/rockchip: remove redundant dev_err call in rockchip_spi_probe() spi/rockchip: remove duplicated include from spi-rockchip.c ARM: dts: fix the chip select gpios definition in the SPI nodes spi: s3c64xx: Update binding documentation spi: s3c64xx: use the generic SPI "cs-gpios" property spi: s3c64xx: Revert "spi: s3c64xx: Added provision for dedicated cs pin" spi: atmel: Use dmaengine_prep_slave_sg() API spi: topcliff-pch: Update error messages for dmaengine_prep_slave_sg() API spi: sh-msiof: Use correct device for DMA mapping with IOMMU spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully spi: rspi: Handle dmaengine_prep_slave_sg() failures gracefully ...
2014-08-05Merge tag 'iommu-updates-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "This time with: - support for the generic PCI device alias code in x86 IOMMU drivers - a new sysfs interface for IOMMUs - preparations for hotplug support in the Intel IOMMU driver - change the AMD IOMMUv2 driver to not hold references to core data structures like mm_struct or task_struct. Rely on mmu_notifers instead. - removal of the OMAP IOVMM interface, all users of it are converted to DMA-API now - make the struct iommu_ops const everywhere - initial PCI support for the ARM SMMU driver - there is now a generic device tree binding documented for ARM IOMMUs - various fixes and cleanups all over the place Also included are some changes to the OMAP code, which are acked by the maintainer" * tag 'iommu-updates-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (67 commits) devicetree: Add generic IOMMU device tree bindings iommu/vt-d: Fix race setting IRQ CPU affinity while freeing IRQ iommu/amd: Fix 2 typos in comments iommu/amd: Fix device_state reference counting iommu/amd: Remove change_pte mmu_notifier call-back iommu/amd: Don't set pasid_state->mm to NULL in unbind_pasid iommu/exynos: Select ARM_DMA_USE_IOMMU iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains iommu/omap: Remove platform data da_start and da_end fields ARM: omap: Don't set iommu pdata da_start and da_end fields iommu/omap: Remove virtual memory manager iommu/vt-d: Fix issue in computing domain's iommu_snooping flag iommu/vt-d: Introduce helper function iova_size() to improve code readability iommu/vt-d: Introduce helper domain_pfn_within_range() to simplify code iommu/vt-d: Simplify intel_unmap_sg() and kill duplicated code iommu/vt-d: Change iommu_enable/disable_translation to return void iommu/vt-d: Simplify include/linux/dmar.h iommu/vt-d: Avoid freeing virtual machine domain in free_dmar_iommu() iommu/vt-d: Fix possible invalid memory access caused by free_dmar_iommu() iommu/vt-d: Allocate dynamic domain id for virtual domains only ...
2014-08-05Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Notable changes: - Heiko Schocher provided a driver for TI TMP103. - Kamil Debski provided a driver for pwm-controlled fans. - Neelesh Gupta provided a driver for power, fan rpm, voltage and temperature reporting on powerpc/powernv systems. - Scott Kanowitz provided a driver supporting Lattice's POWR1220 power manager IC. - Richard Zhu provided a pmbus front-end driver for TPS40422. - Frans Klaver added support for TMP112 to the lm75 driver. - Johannes Pointner added support for EPCOS B57330V2103 to the ntc_thermistor driver. - Guenter Roeck added support for TMP441 and TMP442 to the tmp421 driver. - Axel Lin converted several drivers to the new hwmon API (36 of them, if I counted correctly), and cleaned up many of the drivers along the way. There are also a number of patches fixing bugs discovered while testing Axel's changes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (88 commits) hwmon: (g762) Use of_property_read_u32 at appropriate place hwmon: (sis5595) Prevent overflow problem when writing large limits hwmon: (gpio-fan) Prevent overflow problem when writing large limits hwmon: (ibmpowernv) Use of_property_read_u32 at appropriate place hwmon: (lm85) Convert to devm_hwmon_device_register_with_groups hwmon: (lm85) Avoid forward declaration hwmon: (lm78) Convert to devm_hwmon_device_register_with_groups hwmon: (max6697) Use of_property_read_bool at appropriate places hwmon: (pwm-fan) Make SENSORS_PWM_FAN depend on OF hwmon: (pwm-fan) Remove duplicate dev_set_drvdata call hwmon: (nct6775) Remove num_attr_groups from struct nct6775_data hwmon: (nct6775) Update module description and Kconfig for NCT6106D and NCT6791D hwmon: (adt7411) Convert to devm_hwmon_device_register_with_groups hwmon: (g762) Convert to hwmon_device_register_with_groups hwmon: (emc2103) Convert to devm_hwmon_device_register_with_groups hwmon: (smsc47m1) Avoid forward declaration hwmon: (smsc47m192) Convert to devm_hwmon_device_register_with_groups hwmon: (smsc47m192) Avoid forward declaration hwmon: (max1668) Make max1668_addr_list array const hwmon: (max6639) Make normal_i2c array const ...
2014-08-05watchdog: imx2_wdt: adds big endianness support.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05Merge tag 'master-2014-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05Merge remote-tracking branches 'regulator/topic/tps65217', ↵Mark Brown
'regulator/topic/tps65218', 'regulator/topic/tps6586x' and 'regulator/topic/twl' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/lp8755', ↵Mark Brown
'regulator/topic/ltc3589', 'regulator/topic/max8952', 'regulator/topic/mc13xxx' and 'regulator/topic/palmas' into regulator-next
2014-08-05Merge remote-tracking branches 'regulator/topic/88pm800', ↵Mark Brown
'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/as3722' and 'regulator/topic/bcm590xx' into regulator-next
2014-08-05regulator: act8865: add act8846 to DT binding documentationBeniamino Galvani
This patch adds a new "active-semi,act8846" compatible string and a list of supported regulator names to the devicetree binding documentation for Active-Semi PMUs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05Merge tag 'kvm-arm-for-3.17' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm KVM/ARM New features for 3.17 include: - Fixes and code refactoring for stage2 kvm MMU unmap_range - Support unmapping IPAs on deleting memslots for arm and arm64 - Support MMIO mappings in stage2 faults - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) Conflicts: virt/kvm/arm/vgic.c [last minute cherry-pick from 3.17 to 3.16]
2014-08-04Merge tag 'usb-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ...
2014-08-04Merge tag 'tty-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver update from Greg KH: "Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while" * tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits) tty/n_gsm.c: fix a memory leak in gsmld_open pch_uart: don't hardcode PCI slot to get DMA device tty: n_gsm, use setup_timer Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console" serial: sc16is7xx: Correct initialization of s->clk serial: 8250_dw: Add support for deferred probing serial: 8250_dw: Add optional reset control support serial: st-asc: Fix overflow in baudrate calculation serial: st-asc: Don't call BUG in asc_console_setup() tty: serial: msm: Make of_device_id array const tty/n_gsm.c: get gsm->num after gsm_activate_mux serial/core: Fix too big allocation for attribute member drivers/tty/serial: use correct type for dma_map/unmap serial: altera_jtaguart: Fix putchar function passed to uart_console_write() serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers Serial: allow port drivers to have a default attribute group tty: kgdb_nmi: Automatically manage tty enable serial: altera_jtaguart: Adpot uart_console_write() serial: samsung: improve code clarity by defining a variable serial: samsung: correct the case and default order in switch ...