summaryrefslogtreecommitdiff
path: root/arch/arm/Makefile
AgeCommit message (Collapse)Author
2015-09-07ARM: 8429/1: disable GCC SRA optimizationArd Biesheuvel
While working on the 32-bit ARM port of UEFI, I noticed a strange corruption in the kernel log. The following snprintf() statement (in drivers/firmware/efi/efi.c:efi_md_typeattr_format()) snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]", was producing the following output in the log: | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | | | | |UC] |RUN| | | | | | | |UC] As it turns out, this is caused by incorrect code being emitted for the string() function in lib/vsprintf.c. The following code if (!(spec.flags & LEFT)) { while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } } for (i = 0; i < len; ++i) { if (buf < end) *buf = *s; ++buf; ++s; } while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } when called with len == 0, triggers an issue in the GCC SRA optimization pass (Scalar Replacement of Aggregates), which handles promotion of signed struct members incorrectly. This is a known but as yet unresolved issue. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular case, it is causing the second while loop to be executed erroneously a single time, causing the additional space characters to be printed. So disable the optimization by passing -fno-ipa-sra. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-18ARM: 8418/1: add boot image dependencies to not generate invalid imagesMasahiro Yamada
U-Boot is often used to boot the kernel on ARM boards, but uImage is not built by "make all", so we are often inclined to do "make all uImage" to generate DTBs, modules and uImage in a single command, but we should notice a pitfall behind it. In fact, "make all uImage" could generate an invalid uImage if it is run with the parallel option (-j). You can reproduce this problem with the following procedure: [1] First, build "all" and "uImage" separately. You will get a valid uImage $ git clean -f -x -d $ export CROSS_COMPILE=<your-tools-prefix> $ make -s -j8 ARCH=arm multi_v7_defconfig $ make -s -j8 ARCH=arm all $ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 uImage CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CHK include/generated/timeconst.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL scripts/checksyscalls.sh CHK include/generated/compile.h Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready UIMAGE arch/arm/boot/uImage Image Name: Linux-4.2.0-rc5-00156-gdd2384a-d Created: Sat Aug 8 23:21:35 2015 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6138648 Bytes = 5994.77 kB = 5.85 MB Load Address: 80208000 Entry Point: 80208000 Image arch/arm/boot/uImage is ready $ ls -l arch/arm/boot/*Image -rwxrwxr-x 1 masahiro masahiro 13766656 Aug 8 23:20 arch/arm/boot/Image -rw-rw-r-- 1 masahiro masahiro 6138712 Aug 8 23:21 arch/arm/boot/uImage -rwxrwxr-x 1 masahiro masahiro 6138648 Aug 8 23:20 arch/arm/boot/zImage [2] Update some source file(s) $ touch init/main.c [3] Then, re-build "all" and "uImage" simultaneously. You will get an invalid uImage at random. $ make -j8 ARCH=arm UIMAGE_LOADADDR=0x80208000 all uImage CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CHK include/generated/timeconst.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL scripts/checksyscalls.sh CC init/main.o CHK include/generated/compile.h LD init/built-in.o LINK vmlinux LD vmlinux.o MODPOST vmlinux.o GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o KSYM .tmp_kallsyms1.o KSYM .tmp_kallsyms2.o LD vmlinux SORTEX vmlinux SYSMAP System.map OBJCOPY arch/arm/boot/Image Building modules, stage 2. Kernel: arch/arm/boot/Image is ready GZIP arch/arm/boot/compressed/piggy.gzip AS arch/arm/boot/compressed/piggy.gzip.o Kernel: arch/arm/boot/Image is ready LD arch/arm/boot/compressed/vmlinux GZIP arch/arm/boot/compressed/piggy.gzip OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready UIMAGE arch/arm/boot/uImage Image Name: Linux-4.2.0-rc5-00156-gdd2384a-d Created: Sat Aug 8 23:23:14 2015 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 26472 Bytes = 25.85 kB = 0.03 MB Load Address: 80208000 Entry Point: 80208000 Image arch/arm/boot/uImage is ready MODPOST 192 modules AS arch/arm/boot/compressed/piggy.gzip.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready $ ls -l arch/arm/boot/*Image -rwxrwxr-x 1 masahiro masahiro 13766656 Aug 8 23:23 arch/arm/boot/Image -rw-rw-r-- 1 masahiro masahiro 26536 Aug 8 23:23 arch/arm/boot/uImage -rwxrwxr-x 1 masahiro masahiro 6138648 Aug 8 23:23 arch/arm/boot/zImage Please notice the uImage is extremely small when this issue is encountered. Besides, "Kernel: arch/arm/boot/zImage is ready" is displayed twice, before and after the uImage log. The root cause of this is the race condition between zImage and uImage. Actually, uImage depends on zImage, but the dependency between the two is only described in arch/arm/boot/Makefile. Because arch/arm/boot/Makefile is not included from the top-level Makefile, it cannot know the dependency between zImage and uImage. Consequently, when we run make with the parallel option, Kbuild updates vmlinux first, and then two different threads descends into the arch/arm/boot/Makefile almost at the same time, one for updating zImage and the other for uImage. While one thread is re-generating zImage, the other also tries to update zImage before creating uImage on top of that. zImage is overwritten by the slower thread and then uImage is created based on the half-written zImage. This is the reason why "Kernel: arch/arm/boot/zImage is ready" is displayed twice, and a broken uImage is created. The same problem could happen on bootpImage. This commit adds dependencies among Image, zImage, uImage, and bootpImage to arch/arm/Makefile, which is included from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-26Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
2015-05-15ARM: zx: add basic support for ZTE ZX296702Jun Nie
Add basic code for ZTE ZX296702 platform. [arnd: removed unused zx296702_init_machine function, and changed l2c aux val to default] Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-15ARM: lpc18xx: add basic support for NXP LPC18xx/43xx SoCsJoachim Eastwood
Add support for NXP's LPC18xx (Cortex-M3) and LPC43xx (Cortex-M4) SoCs. These SoCs are NXP's high preformance MCU line and can run at clock speeds up to 180 MHz for LPC18xx and 204 MHz for LPC43xx. LPC43xx is more or less a LPC18xx with a Cortex-M4F core and a few extra peripherals. The LPC43xx series also features one or two Cortex-M0 cores that can be used to offload the main M4 core. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-15ARM: Add STM32 family machineMaxime Coquelin
STMicrolectronics's STM32 series is a family of Cortex-M microcontrollers. It is used in various applications, and proposes a wide range of peripherals. Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12ARM: UniPhier: add basic support for UniPhier architectureMasahiro Yamada
Initial commit for a new SoC family, UniPhier, developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation). This commit includes a minimal set of components for booting the kernel, including SMP support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-08ARM: 8220/1: allow modules outside of bl rangeArd Biesheuvel
Loading modules far away from the kernel in memory is problematic because the 'bl' instruction only has limited reach, and modules are not built with PLTs. Instead of using the -mlong-calls option (which affects all compiler emitted bl instructions, but not the ones in assembler), this patch allocates some additional space at module load time, and populates it with PLT like veneers when encountering relocations that are out of range. This should work with all relocations against symbols exported by the kernel, including those resulting from GCC generated implicit function calls for ftrace etc. The module memory size increases by about 5% on average, regardless of whether any PLT entries were actually needed. However, due to the page based rounding that occurs when allocating module memory, the average memory footprint increase is negligible. Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-22Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. In this case, that includes: - support for the new Annapurna Labs "Alpine" platform - a rework greatly simplifying adding new platform support to the MCPM subsystem (Multi-cluster power management) - cpuidle and PM improvements for Exynos3250 - misc updates for Renesas, OMAP, Meson, i.MX. Some of these could have gone in other branches but ended up here for various reasons" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) ARM: alpine: add support for generic pci ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction ARM: vexpress: DCSCB: tighten CPU validity assertion ARM: vexpress: migrate TC2 to the new MCPM backend abstraction ARM: MCPM: move the algorithmic complexity to the core code ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC ARM: EXYNOS: add AFTR mode support for Exynos3250 ARM: EXYNOS: add code for setting/clearing boot flag ARM: EXYNOS: fix CPU1 hotplug on Exynos3250 ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore ARM: cygnus: fix const declaration bcm_cygnus_dt_compat ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4 ARM: DRA7: hwmod: Add data for GPTimers 13 through 16 ARM: EXYNOS: Remove left over 'extra_save' ARM: EXYNOS: Constify exynos_pm_data array ARM: EXYNOS: use static in suspend.c ARM: EXYNOS: Use platform device name as power domain name ARM: EXYNOS: add support for async-bridge clocks for pm_domains ARM: omap-device: add missed callback for suspend-to-disk ...
2015-04-22Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...
2015-04-14Merge branch 'devel-stable' into for-nextRussell King
2015-04-14Merge branches 'misc', 'vdso' and 'fixes' into for-nextRussell King
Conflicts: arch/arm/mm/proc-macros.S
2015-03-29ARM: 8323/1: force linker to use PIC veneersArd Biesheuvel
When building a very large kernel, it is up to the linker to decide when and where to insert stubs to allow calls to functions that are out of range for the ordinary b/bl instructions. However, since the kernel is built as a position dependent binary, these stubs (aka veneers) may contain absolute addresses, which will break far calls performed with the MMU off. For instance, the call from __enable_mmu() in the .head.text section to __turn_mmu_on() in the .idmap.text section may be turned into something like this: c0008168 <__enable_mmu>: c0008168: f020 0002 bic.w r0, r0, #2 c000816c: f420 5080 bic.w r0, r0, #4096 c0008170: f000 b846 b.w c0008200 <____turn_mmu_on_veneer> [...] c0008200 <____turn_mmu_on_veneer>: c0008200: 4778 bx pc c0008202: 46c0 nop c0008204: e59fc000 ldr ip, [pc] c0008208: e12fff1c bx ip c000820c: c13dfae1 teqgt sp, r1, ror #21 [...] c13dfae0 <__turn_mmu_on>: c13dfae0: 4600 mov r0, r0 [...] After adding --pic-veneer to the LDFLAGS, the veneer is emitted like this instead: c0008200 <____turn_mmu_on_veneer>: c0008200: 4778 bx pc c0008202: 46c0 nop c0008204: e59fc004 ldr ip, [pc, #4] c0008208: e08fc00c add ip, pc, ip c000820c: e12fff1c bx ip c0008210: 013d7d31 teqeq sp, r1, lsr sp c0008214: 00000000 andeq r0, r0, r0 Note that this particular example is best addressed by moving .head.text and .idmap.text closer together, but this issue could potentially affect any code that needs to execute with the MMU off. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27ARM: 8332/1: add CONFIG_VDSO Kconfig and Makefile bitsNathan Lynch
Allow users to enable the vdso in Kconfig; include the vdso in the build if CONFIG_VDSO is enabled. Add 'vdso_install' target. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27ARM: Remove mach-msm and associated ARM architecture codeStephen Boyd
The maintainers for mach-msm no longer have any plans to support or test the platforms supported by this architecture[1]. Most likely there aren't any active users of this code anyway, so let's delete it. [1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-16ARM: Alpine: Initial support for Alpine platformTsahee Zidenberg
This patch introduces initial architecture and device-tree support. Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-11ARM: digicolor: add the machine directory to MakefileBaruch Siach
Make the digicolor specific DT_MACHINE_START entry visible. Fixes: df8d742e929 (ARM: initial support for Conexant Digicolor CX92755 SoC) Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-01-09ARM: probes: move all probe code to dedicate directoryWang Nan
In discussion on LKML (https://lkml.org/lkml/2014/11/28/158), Russell King suggests to move all probe related code to arch/arm/probes. This patch does the work. Due to dependency on 'arch/arm/kernel/patch.h', this patch also moves patch.h to 'arch/arm/include/asm/patch.h', and related '#include' directives are also midified to '#include <asm/patch.h>'. Following is an overview of this patch: ./arch/arm/kernel/ ./arch/arm/probes/ |-- Makefile |-- Makefile |-- probes-arm.c ==> |-- decode-arm.c |-- probes-arm.h ==> |-- decode-arm.h |-- probes-thumb.c ==> |-- decode-thumb.c |-- probes-thumb.h ==> |-- decode-thumb.h |-- probes.c ==> |-- decode.c |-- probes.h ==> |-- decode.h | |-- kprobes | | |-- Makefile |-- kprobes-arm.c ==> | |-- actions-arm.c |-- kprobes-common.c ==> | |-- actions-common.c |-- kprobes-thumb.c ==> | |-- actions-thumb.c |-- kprobes.c ==> | |-- core.c |-- kprobes.h ==> | |-- core.h |-- kprobes-test-arm.c ==> | |-- test-arm.c |-- kprobes-test.c ==> | |-- test-core.c |-- kprobes-test.h ==> | |-- test-core.h |-- kprobes-test-thumb.c ==> | `-- test-thumb.c | `-- uprobes | |-- Makefile |-- uprobes-arm.c ==> |-- actions-arm.c |-- uprobes.c ==> |-- core.c |-- uprobes.h ==> `-- core.h | `-- patch.h ==> arch/arm/include/asm/patch.h Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jon Medhurst <tixy@linaro.org>
2014-10-21dts, arm: Remove $(MACHINE) variable from dtbs make recipesRobert Richter
The machine description is not needed to build dtb files. Signed-off-by: Robert Richter <rrichter@cavium.com>
2014-10-21dts, arm/arm64: Remove dtbs build rules in sub-makesRobert Richter
Add dtb files to build targets and let kbuild handle them. Thus, special dtbs rules can be removed. This eases Makefiles and the implementation of the support of vendor dtb subdirectories. Signed-off-by: Robert Richter <rrichter@cavium.com>
2014-10-21dts, kbuild: Factor out dtbs install rules to Makefile.dtbinstRobert Richter
Move dtbs install rules to Makefile.dtbinst. This change is needed to implement support for dts vendor subdirs. The change makes Makefiles easier and smaller as no longer the dtbs_install rule needs to be defined. Another advantage is that install goals are not encoded in targets anymore (%.dtb_dtbinst_). Signed-off-by: Robert Richter <rrichter@cavium.com>
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-10-02kbuild: arm: Do not define "comma" twiceMasahiro Yamada
The definition of "comma" exists in scripts/Kbuild.include. We should not double it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-09-26ARM: 8161/1: footbridge: select machine dir based on ARCH_FOOTBRIDGEUwe Kleine-König
Syntactically FOOTBRIDGE and ARCH_FOOTBRIDGE are identical (the former is defined in an if ARCH_FOOTBRIDGE block and the latter selects the former). Sematically FOOTBRIDGE means "we have a DC21285 (aka footbridge) device in the system" and ARCH_FOOTBRIDGE is the support for boards with a footbridge device, so ARCH_FOOTBRIDGE is the better symbol here. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-09-25ARM: meson: add basic support for MesonX SoCsCarlo Caione
This patch adds the basic machine file for the MesonX SoCs. Only Meson6 is populated. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-07-30ARM: hisi: add ARCH_HISIHaojian Zhuang
Since multiple ARCH configuration will be appended into mach-hisi directory, add ARCH_HISI as common configuration for different platforms in mach-hisi. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-26Merge tag 's5pv210-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim: - support common clock framework for s5pv210 clock - add generic PHY driver on s5pv210 to support it via DT - add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards - remove board files from mach-s5pv210 and unused codes - enable multiplatform for s5pv210 * tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: samsung: s5pv210: Remove legacy board support ARM: SAMSUNG: Remove remaining legacy code gpio: samsung: Remove legacy support of S5PV210 ARM: S5PV210: Enable multi-platform build support cpufreq: s5pv210: Make the driver multiplatform aware ARM: S5PV210: Register cpufreq platform device ARM: S5PV210: move debug-macro.S into the common space ARM: S5PV210: Untie PM support from legacy code ARM: S5PV210: Remove support for board files ARM: dts: Add Device tree for s5pc110/s5pv210 boards ARM: dts: Add Device tree for s5pv210 SoC ARM: S5PV210: Add board file for boot using Device Tree phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver clk: samsung: Add S5PV210 Audio Subsystem clock driver ARM: SAMSUNG: Remove legacy clock code serial: samsung: Remove support for legacy clock code cpufreq: s3c24xx: Remove some dead code ARM: S5PV210: Migrate clock handling to Common Clock Framework clk: samsung: Add clock driver for S5PV210 and compatible SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge branches 'samsung/cleanup' and 'samsung/s5p-cleanup-v2', tag ↵Arnd Bergmann
'v3.16-rc6' into next/soc The following samsung branches are based on these cleanups, which are already in mainline before this branch gets pulled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-23Merge tag 'v3.17-next-mediatek-support' of ↵Arnd Bergmann
https://github.com/mbgg/linux-mediatek into next/soc Merge basic support for the Mediatek Cortex-A7 SoCs from Matthias Brugger: Support is quite basic, as the only component working up to now are the timers. * tag 'v3.17-next-mediatek-support' of https://github.com/mbgg/linux-mediatek: arm: mediatek: add dts for Aquaris5 mobile phone dt-bindings: add documentation for Mediatek SoC arm: add basic support for Mediatek MT6589 boards Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-22arm: add basic support for Mediatek MT6589 boardsMatthias Brugger
This adds a generic devicetree board file and a dtsi for boards based on MT6589 SoCs from Mediatek. Apart from the generic parts (gic, clocks) the only component currently supported are the timers. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-07-19ARM: S5PV210: Enable multi-platform build supportTomasz Figa
This makes it possible to enable the s5pv210 platform as part of a multiplatform kernel. Also redundant Kconfig options are removed. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)Daniel Thompson
The section of the makefile that determines the TEXT_OFFSET is sorted by address so that, in multi-arch kernel builds, the architecture with the most stringent requirements for the kernel base address gets to define TEXT_OFFSET. The comment should reflect that. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-13ARM: Kirkwood: Remove mach-kirkwoodAndrew Lunn
Now that all boards have been converted to DT and all the support code lives in mach-mvebu, we can remove mach-kirkwood. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-13ARM: S5PC100: no more support S5PC100 SoCKukjin Kim
This patch removes supporting codes for s5pc100 because no more used now. [jason@lakedaemon.net: for drivers/irqchip/Kconfig] Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08ARM: S5P64X0: no more support S5P6440 and S5P6450 SoCsKukjin Kim
This patch removes supporting codes for s5p6440 and s5p6450 because seems no more used now. And if its supporting is required, DT based codes should be supprted next time. Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-23ARM: Add platform support for LSI AXM55xx SoCAnders Berg
The AXM55xx family consists of devices that may contain up to 16 ARM Cortex-A15 cores (in a 4x4 cluster configuration). The cores within each cluster share an L2 cache, and the clusters are connected to each other via a CCN-504 cache coherent interconnect. This machine requires CONFIG_ARM_LPAE enabled as all peripherals are located above 4GB in the memory map. Signed-off-by: Anders Berg <anders.berg@lsi.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-03-11Merge tag 'bcm2835-for-3.15-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/cleanup Merge "ARM: bcm2835: consolidate into mach-bcm/" from Stephen Warren: This pull request consists of a single patch which moves files from arch/arm/mach-bcm2835 into mach-bcm, thus consolidating them with support for other Broadcom chips. * tag 'bcm2835-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: Move to mach-bcm directory Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-28Merge tag 'kconfig-cleanup-for-3.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next/cleanup Merge "kconfig clean-up and mach-virt removal for 3.15" from Rob Herring - Remove common kconfig options required by multi-platform builds out of individual platforms as they are redundant. - Make SMP, CACHE_L2X0 and GPIO config options user visible on multi-platform builds as most platforms enable these options and all platforms can run with them enabled. - Make multi-platform v6 default to more optimal v6k rather than v6 - Remove the last bit of mach-virt and convert it to just a kconfig option. * tag 'kconfig-cleanup-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: virt: select ARM_AMBA ARM: virt: make mach-virt just a kconfig option ARM: vt8500: enable V6K instead of plain V6 ARM: cns3xxx: enable V6K instead of plain V6 ARM: bcm2835: enable V6K instead of plain V6 ARM: Select V6K instead of V6 by default for multi-platform ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platform ARM: select HAVE_SMP for V7 multi-platform ARM: centralize common multi-platform kconfig options Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-24ARM: bcm2835: Move to mach-bcm directoryMarkus Mayer
Move the bcm2835 board file into the mach-bcm directory. This allows us to get rid of the mach-bcm2835 directory with the associated Kconfig and Makefile. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> [swarren, adjust defconfig so ARCH_BCM2835 still gets enabled] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-20kbuild: dtbs_install: new make targetJason Cooper
Unlike other build products in the Linux kernel, there is no 'make *install' mechanism to put devicetree blobs in a standard place. This commit adds a new 'dtbs_install' make target which copies all of the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be set before calling make to change the default install directory. If not set then it defaults to: $INSTALL_PATH/dtbs/$KERNELRELEASE. This is done to keep dtbs from different kernel versions separate until things have settled down. Once the dtbs are stable, and not so strongly linked to the kernel version, the devicetree files will most likely move to their own repo. Users will need to upgrade install scripts at that time. v7: (reworked by Grant Likely) - Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so that each dtb install could have a separate target and be reported as part of the make output. - Fixed dependency problem to ensure $KERNELRELEASE is calculated before attempting to install - Removed option to call external script. Copying the files should be sufficient and a build system can post-process the install directory. Despite the fact an external script is used for installing the kernel, I don't think that is a pattern that should be encouraged. I would rather see buildroot type tools post process the install directory to rename or move dtb files after installing to a staging directory. - Plus it is easy to add a hook after the fact without blocking the rest of this feature. - Move the helper targets into scripts/Makefile.lib with the rest of the common dtb rules Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robh+dt@kernel.org>
2014-02-19ARM: virt: make mach-virt just a kconfig optionRob Herring
The mach code for mach-virt is no longer needed, so we can remove all of mach-virt except the kconfig entry. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2014-02-06ARM: qcom: Split Qualcomm support into legacy and multiplatformKumar Gala
Introduce a new mach-qcom that will support SoCs that intend to be multiplatform compatible while keeping mach-msm to legacy SoC/board support that will not transition over to multiplatform. As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over to mach-qcom. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-01-28Merge branches 'fixes' and 'misc' into for-linusRussell King
2014-01-28ARM: fix building with gcc 4.6.4Russell King
GCC fails to build the kernel if EABI is selected, and the default FPU is selected. Avoid this by explicitly stating that we want VFP with EABI. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-23Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-23Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-30 04:00:06 +0000