summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/Makefile
AgeCommit message (Collapse)Author
2020-02-12ARM: dts: Add initial Iris devicetreesPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri-aster: Follow pinctrl naming from mainlineMax Krummenacher
While at it, add the dtbs for Aster Carrier Board to the Makefile. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-09ARM: dts: apalis/colibri-imx6: Get missing devicetrees from 4.9Philippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: Add Aster devicetrees from 4.9Philippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull: add Toradex Colibri iMX6ULL supportStefan Agner
Add support for the Computer on Module Colibri iMX6ULL and its Bluetooth/Wifi variant along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx6ull-colibri.dtsi and imx6ull-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> (cherry picked from commit c2e4987e0e02095ed3d19e958b3891954ef38243)
2020-02-09ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) supportStefan Agner
Add support for the Computer on Module Colibri iMX7D 1GB along with the Colibri Evaluation Board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> (cherry picked from commit f928a4a377e476525298a552185dfd92d2780319)
2019-02-28MLK-20998 ARM: dts: imx7ulp: move testing features to EVKB.Shenwei Wang
Move the emmc/lpuart/sdcard/sensor/spi-slave testing features from EVK to EVKB board. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Frank Li <frank.li@nxp.com>
2019-02-12MLK-20440 dts: ecspi: Add ecspi and its slave dts files for imx6ulClark Wang
For ECSPI test, add these two dts files. imx6ul-14x14-evk-ecspi.dts: enable ecspi4 function. Because ethernet2 uses the same pins with ecspi4, so disable fec1/fec2. imx6ul-14x14-evk-ecspi-slave.dts: Add "spi-slave" attribute to enable slave mode. Wire Connection: J1704: 3 - SCS 4 - MOSI 5 - MISO 6 - SCK 7 - GND Modify "Makefile" to build these two dts files. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
2019-02-12MLK-20416-4 ARM: dts: imx7ulp-evkb: add dtb for RK055IQH042 panel supportFancy Fang
On IMX7ULP-EVKB board, add a new dtb 'imx7ulp-evk-rm68191 -qhd.dts' to enable the 'RK055IQH042' MIPI panel display on this platform. Signed-off-by: Fancy Fang <chen.fang@nxp.com>
2019-02-12MLK-20416-3 ARM: dts: imx7ulp-evkb: add dtb for RK055AHD042 panel supportFancy Fang
On IMX7ULP-EVKB board, add a new dtb 'imx7ulp-evk-rm68200 -wxga.dts' to enable the 'RK055AHD042' MIPI panel display on this platform. Signed-off-by: Fancy Fang <chen.fang@nxp.com>
2019-02-12MLK-20397 dts: arm: imx7ulp: add SOMB and EVKB revA board supportAndy Duan
The main difference for EVKB(SOMB REVA + EVKB RevA) comparing with EVK(SOM RevB2 + BB RevB1): - SOMB REVA change: WIFI module Cypress 1DX replace with QCA 1PJ - BB EVKB RevA change: MIPI connector The EVKB board focus on default functions on board without rework, WIFI/BT, and MIPI feature test. Currently, the patch don't consider other functions with rework needed. Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2019-02-12MLK-19595 arm: dts: imx: add emmc, nand and btwifi support on imx6ulzRobby Cai
note for the rework: eMMC on EVK board has pad conflict with NAND and Micro-SD. NAND on EVK board has pin conflict with QSPI and SD2(eMMC). Signed-off-by: Robby Cai <robby.cai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
2019-02-12MLK-19589-04 ARM: dts: imx: add dts support for i.mx6ulz evk boardBai Ping
The i.MX6ULZ is sw compatible with i.MX6ULL, and the EVK board has no big difference, so include i.mx6ull evk dts file do reduce code redundancy. Signed-off-by: Bai Ping <ping.bai@nxp.com>
2019-02-12MLK-19452-3 ARM: dts: Add spi slave support for imx7ulpXiaoning Wang
Add "spi-slave" attribute for recognizing slave mode. If it is not in slave mode, please delete this attribute. Usage can be found at spi-fsl-lpspi.txt. Modify "Makefile" to build "imx7ulp-evk-spi-slave.dtb". Signed-off-by: Xiaoning Wang <xiaoning.wang@nxp.com>
2019-02-12MLK-18036-2 Delete *optee.dts filesClement Faure
A specific node for OCRAM mapping in optee as been added in the device tree. These dedicated optee device trees can be removed. Signed-off-by: Clement Faure <clement.faure@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-02-12MLK-17993: arm: dts: rename the dts to match i.MX7ULP board designShenwei Wang
The default display interface on i.MX7ULP EVK board is the HDMI interface, and a hardware rework is required to support the MIPI panel. To match the current board design, added the HDMI node in the imx7ulp-evk.dts and created a new file named imx7ulp-evk-mipi.dts. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Andy Duan <fugang.duan@nxp.com>
2019-02-12MLK-17082-02 ARM: dts: imx: Add dedicated dts for optee support on imx6sl/sllBai Ping
Add dedicated dts file to support optee on imx6sl/sll. The OCRAM is resized to make sure the OCRAM space used by TEE side is not visiable to no-secure linux kernel side. Signed-off-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-02-12MLK-16750-7 arm: dts: add dedicated dts for OP-TEEPeng Fan
Add dedicated dts for OP-TEE. The modification is about ocram partition. The default dtsi use lower ocram area for low power things. But i.MX chips TZASC could only protect OCRAM from high address to low address. So modify the OCRAM space for OP-TEE. The PSCI/OPTEE firmware node will be dynamically created in OP-TEE. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
2019-02-12MLK-15348-02 arm: dts: imx7ulp: add focaltech touch panel ft5246 supportFugang Duan
Add focaltech new touch panel ft5246 support. Set the ft5426 as default panel for dts. If want to use the old panel, then it needs to boot with imx7ulp-evk-ft5416.dtb file. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> (cherry picked from commit:963fea909ef5e42294cb2e656e5e3870a2171c01)
2019-02-12MLK-14451: arm: dts: Remove dts entry for sensors in imx7ulp-evk.dtsAdriana Reus
Sensors are connected to M4 and not to A-Core. Sensors will not be exposed to A-Core via standard i2c interface but via an i2c proxy layer over rpmsg. Remove the dts entry to avoid the probe error messages and add a separate dts file for the case where someone wishes to rework the board themselves and connect sensors for testing purposes. Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
2019-02-12MLK-14286-3 ARM: dts: imx7ulp-evk-hdmi: create the hdmi dts fileFancy Fang
Create a new dts file 'imx7ulp-evk-hdmi.dts' to enable hdmi display to avoids conflict with mipi dsi panel display. Use endpoint to connect dsi controller and adv7535. Signed-off-by: Fancy Fang <chen.fang@nxp.com> (cherry picked from commit 86fb9340d01a4583628d465f29fba67df93c453c)
2019-02-12MLK-14373-5: ARM: dts: imx6ul-evk-btwifi: Add OOB IRQ support for imx6ul, ↵xlin
imx6ull Added new DTS files for: imx6ul-9x9-evk imx6ul-14x14-evk imx6ull-9x9-evk imx6ull-14x14-evk with support for Wifi OOB interrupts. Signed-off-by: xlin <xlin@murata.com> Signed-off-by: Tiberiu Breana <andrei-tiberiu.breana@nxp.com>
2019-02-12MLK-13906: ARM: dts: new dtb for mfgtool to burn both BSP and M4 to eMMCHan Xu
Add one more dtb file for mfgtool purpose only, it enabled both eMMC and QSPI to burn both BSP and M4 images in one process. Kernel still uses the original eMMC dtb so the QSPI, which belongs to M4 domain won't be exposed in A7 domain. Signed-off-by: Han Xu <han.xu@nxp.com>
2019-02-12MLK-13748: ARM: dts: imx6ull-9x9-evk-ldo: add ldo enable dtsRobin Gong
Add ldo enable dts Signed-off-by: Robin Gong <yibin.gong@nxp.com>
2019-02-12MLK-13681-2 ARM: dts: add imx6sll-evk-reva baord supportHaibo Chen
The latest imx6sll evk Rev A board (default board) already fix HS400 I/O timing issue, so the default evk board support HS400 mode. But the older evk board (Rev A) board still has issue for HS400 mode, so this patch disabled HS400 mode for the older evk board, just support HS200 mode for imx6sll evk Rev A board. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2019-02-12MLK-13610-2 ARM: dts: imx7ulp-evk: add base board sd slot supportHaibo Chen
On imx7ulp-evk board, the SD slot on base board is conflict with BT/WiFi. This patch seperate the usdhc1 from imx7ulp-evk.dts, and create new dts. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2019-02-12MLK-13612-1: ARM: dts: enable QSPI for i.MX7ULP1Han Xu
Add one more dts for QSPI on i.MX7ULP1 for mfgtool purpose. Signed-off-by: Han Xu <han.xu@nxp.com>
2019-02-12MXSCM-235 dts: add support for scm qwks rev3Juan Gutierrez
Add support for SCM i.MX6DQ 1Gb QWKS rev3 Support the next features for 1Gb qwks rev3 boards: - Support for fix lpddr2 mode - hdcp and enetirq - bluetooth and wifi for Murata ZP SDIO dongle Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
2019-02-12MLK-13574-3: ARM: dts: enable audio in a seperate dtsShengjiu Wang
Audio is in M4 domain, so we need an indepenent dts for audio. M4 domain is controled by RTOS, this dts is for demo purpose in linux Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
2019-02-12MLK-13537 dts: arm: imx7ulp-evk: enable Murata 1DX wifi/bt for evk boardAndy Duan
Add Murata 1DX wifi/bt for evk board. Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2019-02-12MLK-13534-2 ARM: dts: imx7ulp: add 14x14 arm2 boardAnson Huang
Add i.MX7ULP 14x14 arm2 board support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2019-02-12MLK-13498 ARM: dts: add eMMC support for ulp-evk boardHaibo Chen
Add eMMC support (8 bit mode) for ulp-evk board. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2019-02-12MLK-13441-3 ARM: dts: imx7ulp: add evk board supportAnson Huang
Add i.MX7ULP EVK board support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: ye li <ye.li@nxp.com>
2019-02-12MLK-13287 ARM: dts: imx: support for epop 6sxscm evb boardAlejandro Sierra
Add support for the epop i.MX6SX SCM EVB board The epop variant contains an eMMC(512MB) within the POP package. Support the next features for epop 6sxscm EVB: - Regular epop board - M4 support Signed-off-by: Alejandro Sierra <alejandro.sierra@nxp.com> Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
2019-02-12MLK-13283 ARM: dts: imx: support for 1gb 6sxscm evb boardAlejandro Sierra
Add support for the 1gb i.MX6SX SCM EVB board Support the next features for 1Gb 6sxscm EVB: - Regular 1gb board - M4 support - MQS - SAI sound card - LCD and HDMI with sii902x support - Bluetooth and Wifi Murata ZP SDIO dongle Signed-off-by: Alejandro Sierra <alejandro.sierra@nxp.com> Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
2019-02-12MLK-13413 ARM: imx6sll-evk: add Murata Type ZP (BCM4339) module supportAndy Duan
Add Murata Type ZP (BCM4339) module support on i.MX6SLL platforms: - i.MX6SLL EVK (SD3 slot + BT connector) + Murata adapter V2.0 Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
2019-02-12MLK-13248 ARM: dts: imx: add support for 1gb evb boardAlejandro Sierra
Add support for SCM i.MX6DQ 1Gb Evaluation Board (EVB). Support the next features for 1Gb EVB boards: - Support for fix and interleave mode - For fix mode additional dts are provided for: - hdcp - enetirq - bluetooth and wifi for Murata ZP SDIO dongle Signed-off-by: Alejandro Sierra <alejandro.sierra@nxp.com> Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
2019-02-12MLK-13247 ARM: dts: imx: add support for 1gb qwks boardJuan Gutierrez
Add support for SCM i.MX6DQ 1Gb Quick Start Board (QWKS). Support the next features for 1Gb QWKS boards: - Support for fix and interleave mode - For fix mode additional dts are provided for - hdcp - Wifi with Murata ZP SDIO dongle Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com> Signed-off-by: Alejandro Sierra <alejandro.sierra@nxp.com>
2019-02-12MLK-13359 ARM: dts: imx: Add imx6sll evk board dtsBai Ping
Add i.MX6SLL EVK board dts file. Signed-off-by: Bai Ping <ping.bai@nxp.com>
2019-02-12MLK-13334 ARM: dts: imx: Add lpddr2 arm2 dts for imx6sllBai Ping
For i.MX6SLL LPDDR2 and LPDDR3 ARM2 board, they share the same board design but using different DDR chip. So we can reuse the LPDDR3 ARM2 board dts on LPDDR2 ARM2 board. Signed-off-by: Bai Ping <ping.bai@nxp.com>
2019-02-12MLK-13350-2 ARM: dts: add ecspi dts file for imx6sll lpddr3 arm2 boardRobby Cai
ECSPI1_SCLK pin is shared by LCD power enable and SPI1 SCLK. To use ecspi, need to disable lcdif function. Signed-off-by: Robby Cai <robby.cai@nxp.com>
2019-02-12MLK-13345-2 ARM: dts: csi: add parallel camera support on imx6sll lpddr3 arm ↵Robby Cai
board since there's pin conflict between camera and epdc on this board, we add a new dts file for csi/camera function. Signed-off-by: Robby Cai <robby.cai@nxp.com>
2019-02-12MLK-13343-2: ARM: dts: imx6sll: enable audio functionsShengjiu Wang
enabled the wm8962 and spdif out. There is pin conflict between spdif and usdhc2. So add dedicate spdif dts. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
2019-02-12MLK-12928-8 ARM: dts: imx6ul-14x14-evk: add new imx6ul-14x14-evk-pf1550 boadRobin Gong
Add new pf1550 board support. Signed-off-by: Robin Gong <yibin.gong@nxp.com>
2019-02-12MLK-13303-3 ARM: dts: imx6sll: add lpddr3 arm2 board supportAnson Huang
Add i.MX6SLL-LPDDR3-ARM2 board support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2019-02-12MLK-13186-2 arm: imx6qp: add imx6qp standalone pcie dtbRichard Zhu
In order to pass the pcie gen2 compliance tests on imx6qp sd revb board, add one standalone imx6qp sd ldo pcie dtb - disalbe fec/sata, because that the fec/sata can't work when pll6 is in bypass mode. NOTE: Bypass mode of pll6 is mandatory required when external oscillator is used as pcie ref clk. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
2019-02-12MLK-13072 dts: mx6ull: add 9x9 evk btwifi supportDong Aisheng
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
2019-02-12MLK-13071 ARM: dts: imx6ullevk: Add support for imx6ull 9x9 EVK boardYe Li
Add DTS file imx6ull-9x9-evk.dts which is originated from i.MX6UL EVK with some changes: 1. Include imx6ull.dtsi as base 2. sim2 is removed. 3. Move GPIO5 pins setting to iomuxc-snvs 4. Enable CSI and ov5640 Signed-off-by: Ye Li <ye.li@nxp.com>
2019-02-12MLK-13022-2 arm: dts: new dts for eMMC support on i.MX6UL EVK reworked boardHaibo Chen
Enable eMMC for i.MX6UL EVK rework board due to the pad conflict with NAND and Micro-SD. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2019-02-12MLK-13022-1 arm: dts: new dts for eMMC support on i.MX6ULL EVK reworked boardHaibo Chen
Enable eMMC for i.MX6ULL EVK rework board due to the pad conflict with NAND and Micro-SD. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-16 10:26:19 +0000