summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/am4372.dtsi
AgeCommit message (Collapse)Author
2019-10-29ARM: dts: am4372: Set memory bandwidth limit for DISPCPeter Ujfalusi
[ Upstream commit f90ec6cdf674248dcad85bf9af6e064bf472b841 ] Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions. am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-02-25ARM: dts: am4372: Correct the interrupts_properties of McASPPeter Ujfalusi
[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ] Fixes the following warnings: arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@48038000 arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@4803C000 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-16ARM: dts: Use - instead of @ for DT OPP entries for TI SoCsViresh Kumar
Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-23ARM: dts: am4372: Update operating-points-v2 table for cpuDave Gerlach
The operatings-points-v2 table for am4372 was merged before any user of it was present in the kernel and before the binding had been finalized. The new ti-cpufreq driver and binding expects the platform specific properties to be part of the operating-points-v2 table rather than the cpu node so let's move them there as the only user is the ti-cpufreq driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> eviewed-by: Lukasz Majewski <lukma@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-07Documentation: DT: net: cpsw: remove no_bd_ram propertyGrygorii Strashko
Even if no_bd_ram property is described in TI CPSW bindings the support for it has never been introduced in CPSW driver, so there are no real users of it. Hence, remove no_bd_ram property from documentation and DT files. Cc: 'Rob Herring <robh+dt@kernel.org>' Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-27ARM: dts: am4372: Add an empty chosen node to top level DTSIJavier Martinez Canillas
Commit 75813028bbd7 ("ARM: dts: am4372: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 75813028bbd7 ("ARM: dts: am4372: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-18Merge tag 'omap-for-v4.10/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.10 merge window: - A series of patches to configure tps65217 PMIC interrupts for power button, charger and usb and use them on am335x - Configure EEPROM, LEDs and USR1 button for omap5 boards - Add tscadc DMA properites for am33xx and am4372 - Configure baltos-ir5221 both musb channels to host mode - Configure internal and external RTC clocks for am335x boards - Don't reset gpio3 block on baltos - Remove pinmux for dra72-evm for erratum i869, fix the regulators and seprate out tps65917 support - Add dra718-evm support - Add minimal droid 4 xt894 support * tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits) ARM: dts: Add minimal support for motorola droid 4 xt894 ARM: dts: Add support for dra718-evm ARM: dts: dra72: Add separate dtsi for tps65917 ARM: dts: dra72-evm: Fix modelling of regulators ARM: dts: dra72-evm: Remove pinmux configurations for erratum i869 ARM: dts: am335x-baltos: don't reset gpio3 block ARM: dts: AM335X-evmsk: Add the internal and external clock nodes for rtc ARM: dts: AM335X-evm: Add the internal and external clock nodes for rtc ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtc ARM: dts: am335x-baltos-ir5221: use both musb channels in host mode ARM: dts: am4372: add DMA properties for tscadc ARM: dts: am33xx: add DMA properties for tscadc ARM: dts: omap5 uevm: add USR1 button ARM: dts: omap5 uevm: add LEDs ARM: dts: omap5 uevm: add EEPROM ARM: dts: am335x: Add the power button interrupt ARM: dts: am335x: Add the charger interrupt dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts ARM: dts: am335x: Support the PMIC interrupt ARM: dts: tps65217: Add the power button device ... Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-09ARM: dts: am4372: add DMA properties for tscadcMugunthan V N
Add DMA properties for tscadc Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-07ARM: dts: Add #pinctrl-cells for pinctrl-single instancesTony Lindgren
Drivers using pinctrl-single,pins have #pinctrl-cells = <1>, while pinctrl-single,bits need #pinctrl-cells = <2>. Note that this patch can be optionally applied separately from the driver changes as the driver supports also the legacy binding without #pinctrl-cells. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31ARM: dts: am4372: Add missing unit name to memory nodesJavier Martinez Canillas
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31ARM: dts: am4372: Remove skeleton.dtsi usageJavier Martinez Canillas
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it shouldn't have functional changes. Since no am4372 based board had a memory node defined, a dummy node is added so the compiled DTB memory node is the same than before. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15ARM: dts: omap3/am4372: add missing unit name to ocp nodeJavier Martinez Canillas
This patch fixes the following DTC warnings for many boards: "Node /ocp has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-01Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
2016-06-28ARM: dts: am335x/am437x/dra7: use new "ti, cpsw-mdio" compat stringGrygorii Strashko
Add "ti,cpsw-mdio" for am335x/am437x/dra7 SoCs where MDIO is implemented as part of TI CPSW and, this way, enable PM runtime auto suspend for Davinci MDIO driver on these paltforms. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22ARM: dts: AM43xx: Add node for RNGLokesh Vutla
Adding DT node for hardware random number generator. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-17Documentation: DT: cpsw: remove rx_descs propertyIvan Khoronzhuk
There is no reason to hold s/w dependent parameter in device tree. Even more, there is no reason in this parameter because davinici_cpdma driver splits pool of descriptors equally between tx and rx channels anyway. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10ARM: dts: Correct misspelling, "emda3" -> "edma3"Robert P. J. Day
Correct misspelling, "emda3" -> "edma3". Reported-by: Adam J Allison <adamj.allison@gmail.com> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: am4372: Add operating-points-v2 tableDave Gerlach
Add an operating-points-v2 table with all OPPs available for all silicon revisions along with necessary data for use by ti-cpufreq to selectively enable the appropriate OPPs at runtime. Information from AM437x Data Manual, SPRS851B, Revised April 2015, Table 5-2. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodesFranklin S Cooper Jr
Previous patches switched the ECAP and EPWM to use the new bindings. These bindings explicitly adds the various required clocks via DT rather than depending on hwmod. Therefore, it is safe to remove the hwmod entries since they are no longer needed. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindingsFranklin S Cooper Jr
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to provide the various required clocks. For AM437 and AM335x, add the required clocks explicitly to DT. The hwmod entries for ECAP and EPWM will be removed and this will prevent anything from breaking. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-18Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
2016-04-13ARM: dts: am437x: Fix GPMC dma propertiesFranklin S Cooper Jr
This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-12ARM: dts: am4372: Enable gpio controller for GPMCRoger Quadros
GPMC driver provides GPI support for the GPMC_WAIT pins. Mark it gpio controller capable. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-12ARM: dts: da850/am4372/am33xx: Use generic node name for ehrpwmFranklin S Cooper Jr
When possible generic node names should be used. So change the node name from ehrpwm to pwm. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: dts: am43xx: fix edma memcpy channel allocationTero Kristo
EDMA was allocating DMA channels 32 and 33 for memcpy usage, out of which channel 33 is actually used by DES crypto engine. This bad allocation of the channel causes a crash in the DES crypto engine, as the channel gets configured for memcpy usage instead of hardware <-> memory DMA. Fixed by allocating DMA channels 58 and 59 for memcpy usage (I2C0 RX/TX), which are not used by anybody. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Tero Kristo <t-kristo@ti.com> Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-02Merge tag 'omap-for-v4.6/dt-pt2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Part 2 of device tree changes for omaps for v4.6 merge window" from Tony Lindgren: - A series of GPMC related interrupt changes from Rogeq Quadros <rogerq@ti.com> to prepare adding interrupt support to the NAND driver - Add RTC support for ti81xx - Correct LogicPD Torpedo mode description - Add basic support for LG Optimus Black phone in several patches by Paul Kocialkowski <contact@paulk.fr> - Change address-cells for dra7 for LPAE - Add TBCLK for PWMSS on dra7 * tag 'omap-for-v4.6/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: omap3-sniper: TWL4030 keypad support Revert "ARM: dts: DRA7: Add dt nodes for PWMSS" ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND ARM: dts: dm814x: dra62x: Fix NAND device nodes ARM: dts: DRA7: Add dt nodes for PWMSS ARM: dts: DRA7: Add TBCLK for PWMSS ARM: dts: DRA7: change address-cells and size-cells ARM: dts: omap3-sniper: USB OTG support ARM: dts: LG Optimus Black codename sniper basic support ARM: dts: dm3730-torpedo-devkit: Add "Wireless" to model ARM: dts: Add RTC entry for dm816x ARM: dts: Add RTC entry for dm814x and dra62x ARM: dts: omap3: Fix NAND device nodes ARM: dts: dm8168-evm: ARM: dts: Disable wait pin monitoring for NAND ARM: dts: dm816x: Fix NAND device nodes ARM: dts: am335x: Disable wait pin monitoring for NAND ARM: dts: am335x: Fix NAND device nodes ARM: dts: am437x: Disable wait pin monitoring for NAND ARM: dts: am437x: Fix NAND device nodes ARM: dts: dra7: Remove redundant nand property ...
2016-02-26Merge tag 'omap-for-v4.6/dt-pt1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.6 merge window. Mostly just adding board specific devices and few new boards: - N900 improvments for adp1653 and gpio keys - Add missing bandgap data for omap3 - Add more devices for compulab cm-t335 - Add n950 WLAN support, enable modem, add pinctrl for SSI - Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND - Add syscon node for PHY's on dra7 - Add support more devices on logicpd torpedo - Add USB host support for igep and specify boot console - Fix audio clock for am335x-sl50 and specify boot console - Remove deprecated tx-fifo-resize for dwc3 that was only used on omap5 es1.0 - Add dra7 thermal data - Update am43x-epos-evm compatible string to am438 - Add support for logicpd dm3730 som-lv * tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am57xx-beagle-x15: Add eeprom information ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV ARM: dts: n900: Use linux input defines instead hardcoded constants ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV ARM: dts: omap3logic: Add PWM-Backlight ARM: dts: omap3-n900: Allow gpio keys to be disabled ARM: dts: am43x-epos-evm: Add the am438 compatible string ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data ARM: dts: DRA7: Add IVA thermal data ARM: dts: DRA7: Add DSPEVE thermal data ARM: dts: remove deprecated property dwc3 ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state ARM: dts: am335x-sl50: Fix audio codec setup. ARM: dts: am335x-sl50: Specify the device to be used for boot console output. ARM: dts: omap3-igep0030-common: Add USB Host support ARM: dts: igep00x0: Specify the device to be used for boot console output. ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux ARM: dts: OMAP3-N950-N9: Enable modem ARM: dts: OMAP3-N950-N9: Enable SSI module ARM: dts: LogicPD Torpedo: Add SPI EEPROM ...
2016-02-26Merge branch 'omap-for-v4.6/dt-gpmc' into omap-for-v4.6/dtTony Lindgren
2016-02-26ARM: dts: am437x: Fix NAND device nodesRoger Quadros
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-12ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module"Kishon Vijay Abraham I
Add "syscon-phy-power" property and remove the deprecated "ctrl-module" property from SATA and USB PHY node. Also remove the unused control module dt nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am4372: fix irq type for arm twd and global timerGrygorii Strashko
As per ARM documentation PPI(0) ID27 - global timer interrupt is rising-edge sensitive. PPI(2) ID29 - twd interrupt is rising-edge sensitive. and the same is proved by GIC distributor register value GIC_DIST_CONFIG(0xC04) = 0x7DC00000. Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM TWD and Global timers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25Merge branch 'enable-devices' into omap-for-v4.5/fixesTony Lindgren
2016-01-21ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailboxKeerthy
Add ti,mbox-send-noirq to wkup_m3 mailbox so that messages using wkup_m3 mailbox are sent without triggering any further interrupts. This is required to be able to send multiple messages to the WkupM3 after the mailbox usage logic adjustment in the wkup_m3_ipc driver. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise commit description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-20Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2015-12-18ARM: dts: AM4372: add entry for qspi mmap regionVignesh R
Add qspi memory mapped region entries for AM43xx based SoCs. Also, update the binding documents for the controller to document this change. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: DTS: am437x: Use the new DT bindings for the eDMA3Peter Ujfalusi
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and enable the DMA even crossbar with ti,am335x-edma-crossbar. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-09ARM: dts: am4372: fix clock source for arm twd and global timersGrygorii Strashko
ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2. But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result. Timekeeping core misbehaves. For example, execution of command "sleep 5" will take 10 sec instead of 5. Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use it for clocking ARM TWD and Global timer (same way as on OMAP4). Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: am4372: add spi alias for qspiMugunthan V N
Set the alias for qspi to spi0 Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30ARM: dts: am437x/am33xx/omap/dm816x: Add gpmc dma channelFranklin S Cooper Jr
Add dma channel information to the gpmc. Although not enabled by default this will allow prefetch-dma to be used. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-21arm: dts: am4372: add syscon phandle to cpsw nodeMugunthan V N
There are 2 MACIDs stored in the control module of the am4372. These are read by the cpsw driver if no valid MACID was found in the devicetree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-05ARM: dts: AM437x: Add the internal and external clock nodes for rtcKeerthy
rtc can either be supplied from internal 32k clock or external crystal generated 32k clock. Internal clock is SOC specific and the external clock is board dependent. Adding the corresponding nodes. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-08-13arm: boot: dts: am4372: add ARM timers and SCU nodesFelipe Balbi
AM437x devices sport SCU, TWD and Global timers, let's add them to DTS so they have a chance to probe and be used by Linux. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-12ARM: dts: AM4372: Add the am4372-rtc compatible stringKeerthy
am4372-rtc string was already part of dts, introduced to identify the rtc specific to am4372 family of SoCs. It was removed in one of the previous patches. Adding back the same with appropriate documentation. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-12Merge branch 'for-4.3/ti-clk-dt' of https://github.com/t-kristo/linux-pm ↵Tony Lindgren
into omap-for-v4.3/dt-v2
2015-08-06ARM: dts: AM4372: Reorder the rtc compatible stringKeerthy
Compared to da830-rtc compatibility am3352-rtc is more compatible to the one in am437x. Hence adding the am3352-rtc compatible to cover the entire feature set. The ti,am4372-rtc has no Documentation and not used even in the driver hence removing it. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: AM4372: Add the wkup_m3_ipc nodeSuman Anna
Add the Wakeup M3 IPC device node for the wkup_m3_ipc driver on AM4372 SoC. This node uses the IPC registers, part of the Control Module, and is therefore added as a child of the scm node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-04ARM: dts: am4372: Add named interrupt property for dwc3Felipe Balbi
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-31ARM: dts: am4372: Set the default clock rate for dpll_clksel_mac_clk clockKeerthy
cpsw needs the clock to be running at 50MHz in kernel. Hence setting the default rate. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 02:13:06 +0000