summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/armada-xp.dtsi
AgeCommit message (Collapse)Author
2013-06-14Merge tag 'dt-3.11-5' of git://git.infradead.org/users/jcooper/linux into ↵Olof Johansson
next/dt From Jason Cooper: mvebu dt changes for v3.11 (round 5) - mvebu - set aliases for ethernet interfaces - PCIe range for armada-xp-db - rm unused properties on A370 - kirkwood - assign sheevaplug pinmuxs to correct devices - enable second PCIe port for ts219 * tag 'dt-3.11-5' of git://git.infradead.org/users/jcooper/linux: ARM: Kirkwood: ts219: Enable second PCIe port in DT. ARM: mvebu: Remove device tree unused properties on A370 arm: mvebu: armada-xp-db: ensure PCIe range is specified arm: kirkwood: sheevaplug: move pinmux configs to the right devices ARM: mvebu: set aliases for ethernet controllers Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-04ARM: mvebu: set aliases for ethernet controllersWilly Tarreau
These aliases are used when feeding the DT from ATAGS to set the devices MAC addresses. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-28arm: mvebu: fix length of Ethernet registers area in .dtsiThomas Petazzoni
The length of the registers area for the Marvell 370/XP Ethernet controller was incorrect in the .dtsi: 0x2400 while it should have been 0x4000. Until now, this problem wasn't noticed because there was a large static mapping for all I/Os set up by ->map_io(). But since we're going to get rid of this static mapping, we need to ensure that the register areas are properly sized. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-13ARM: mvebu: do not duplicate the mpic aliasThomas Petazzoni
The mpic alias is already defined in the common armada-370-xp.dtsi, so there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi level. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15ARM: dts: mvebu: introduce internal-regs nodeGregory CLEMENT
Introduce a 'internal-regs' subnode, under which all devices are moved. This is not really needed for now, but will be for the mvebu-mbus driver. This generates a lot of code movement since it's indenting by one more tab all the devices. So it was a good opportunity to fix all the bad indentation. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15ARM: dts: mvebu: Convert all the mvebu files to use the range propertyGregory CLEMENT
This conversion will allow to keep 32 bits addresses for the internal registers whereas the memory of the system will be 64 bits. Later it will also ease the move of the mvebu-mbus driver to the device tree support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15ARM: dts: mvebu: move all peripherals inside socThomas Petazzoni
reorganize the .dts and .dtsi files so that all devices are under the soc { } node (currently some devices such as the interrupt controller, the L2 cache and a few others are outside). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15Merge tag 'tags/mvebu_fixes_for_v3.9_round3' into mvebu/dtJason Cooper
pulling in mvebu branches which changes armada*.dts? files for LPAE changes mvebu fixes for v3.9 round 3 - Kirkwood - a couple of small fixes for the Iomega ix2-200 board (ether and led) - mvebu - allow GPIO button to work on Mirabox when running SMP
2013-04-03ARM: mvebu: Add thermal support to Armada XP device treeEzequiel Garcia
This patch adds support for the thermal controller available in all Armada XP boards. This controller has two 4-byte registers: one to read the thermal sensor, the other for sensor initialization. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08arm: mvebu: Reduce reg-io-width with UARTsHeikki Krogerus
Setting the reg-io-width to 1 byte represents more accurate description of the HW. This will fix an issue where UART driver causes kernel panic during bootup. Gregory CLEMENT traced the issue to autoconfig() in 8250.c, where the existence of FIFO is checked from UART_IIR register. The register is now read as 32-bit value as the reg-io-width is set to 4-bytes. The retuned value seems to contain bogus data for bits 31:8, causing the issue. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Add support for USB host controllers in Armada 370/XPEzequiel Garcia
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller. This patch adds support for this controller in Armada 370 and Armada XP SoC common device tree files. Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28arm: mvebu: Improve the SMP support of the interrupt controllerGregory CLEMENT
This patch makes the interrupt controller driver more SMP aware for the Armada XP SoCs. It adds the support for the per-CPU irq. It also adds the implementation for the set_affinity hook. Patch initialy wrote by Yehuda Yitschak and reworked by Gregory CLEMENT. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has only three Ethernet interfacesThomas Petazzoni
We originally thought that the MV78230 variant of the Armada XP had four Ethernet interfaces, like the other variants MV78260 and MV78460. In fact, this is not true, and the MV78230 has only three Ethernet interfaces. So, the definitions of the Ethernet interfaces is now done as follows: * armada-370-xp.dtsi: definitions of the first two interfaces, that are common to Armada 370 and Armada XP * armada-xp.dtsi: definition of the third interface, common to all Armada XP variants. * armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of the fourth interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-27arm: mvebu: add Aurora L2 Cache Controller to the DTGregory CLEMENT
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Tested-and-reviewed-by: Yehuda Yitschak <yehuday@marvell.com> Tested-and-reviewed-by: Lior Amsalem <alior@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21Merge tag 'marvell-armadaxp-smp-for-3.8' of ↵Jason Cooper
git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything SMP support for Armada XP The purpose of this series is to add the SMP support for the Armada XP SoCs. Beside the SMP support itself brought by the last 3 commits, this series also adds the support for the coherency fabric unit and the power management service unit. The coherency fabric is responsible for ensuring hardware coherency between all CPUs and between CPUs and I/O masters. This unit is also available for Armada 370 and will be used in an incoming patch set for hardware I/O cache coherency. The power management service unit is responsible for powering down and waking up CPUs and other SOC units.
2012-11-21Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of ↵Jason Cooper
git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything Marvell XOR driver DT changes for 3.8 Conflicts: arch/arm/boot/dts/armada-xp.dtsi
2012-11-21arm: mvebu: Add IPI support via doorbellsGregory CLEMENT
This patch enhances the IRQ controller driver to add support for Inter-Processor-Interrupts that are needed to enable SMP support. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-21arm: mvebu: Add initial support for power managmement service unitGregory CLEMENT
The Armada 370 and Armada XP SOCs have a power management service unit which is responsible for powering down and waking up CPUs and other SOC units. This patch adds support for this unit. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-20arm: mvebu: add 'clocks' property to Ethernet nodes for Armada 370/XP SoCsThomas Petazzoni
The mvneta driver now understands a standard 'clocks' clock pointer property in the Device Tree nodes for the Ethernet devices, so we add the right clock reference for the different Ethernet ports of the Armada 370/XP SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20Merge tag 'marvell-boards-net-for-3.8' of ↵Thomas Petazzoni
github.com:MISL-EBU-System-SW/mainline-public into test-the-merge Marvell boards changes related to Ethernet, for 3.8 Conflicts: arch/arm/boot/dts/armada-370-xp.dtsi arch/arm/boot/dts/armada-xp-db.dts
2012-11-20arm: mvebu: add XOR engines to Armada XP .dtsiThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20clk: armada-370-xp: add support for clock frameworkGregory CLEMENT
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-16arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XPThomas Petazzoni
The Armada 370 SoC has two network units, while the Armada XP has four network units. The first two network units are common to both the Armada XP and Armada 370, so they are added to armada-370-xp.dtsi, while the other two network units are specific to the Armada XP and therefore added to armada-xp.dtsi. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-02arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni
The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-07-10arm: mach-mvebu: add support for Armada 370 and Armada XP with DTThomas Petazzoni
[ben.dooks@codethink.co.uk: ensure error check on of_property_read_u32] [ben.dooks@codethink.co.uk: use mpic address instead of bus-unit's ] [ben.dooks@codethink.co.uk: BUG_ON() if the of_iomap() fails for mpic] [ben.dooks@codethink.co.uk: move mpic per-cpu register base ] [ben.dooks@codethink.co.uk: number fetch should use irqd_to_hwirq()] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Yehuda Yitschak <yehuday@marvell.com> Tested-by: Lior Amsalem <alior@marvell.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-03 12:14:50 +0000