summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91sam9n12ek.dts
AgeCommit message (Collapse)Author
2017-05-31ARM: dts: at91: Switch to the new NAND bindingsBoris Brezillon
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-27ARM: dts: at91: at91sam9n12ek: fix panel compatible stringAlexandre Belloni
Properly use qiaodian as the vendor prefix for the panel. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-11-16ARM: at91/dt: remove leftovers clock definitionAlexandre Belloni
The clocks group properties and the clock@0 node are useless, remove them to avoid copy pasting in future device trees. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-11-16ARM: at91/dt: replace gpio-key,wakeup with wakeup-source propertySudeep Holla
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-09-18ARM: at91/dt: at91sam9n12ek: disable i2c1Bo Shen
No device connect to i2c1, so remove it to keep it as disabled. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-09-18ARM: at91/dt: at91sam9n12ek: fix the led labels nameJosh Wu
Correct the led labels in at91sam9n12ek. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-08-07ARM: at91/dt: add drm support for at91sam9n12ekBo Shen
Add drm support for at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-04ARM: at91/dt: at91sam9n12ek: use stdout-pathAlexandre Belloni
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: at91sam9n12ek: enable RTCNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9n12ek: enable udpBo Shen
Enable usb device port on at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904Bo Shen
Using the device tree ids for wm8904 codec. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01ARM: at91/dt: sam9n12ek: ohci: add port and vbus propertyBo Shen
Add the port number and vbus property for ohci port, or else if bootloader won't configure the vbus pin, the 5v supply is not power on, so can not work with usb devices. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: at91sam9n12ek: switch sound to CCFBo Shen
As the at91sam9n12ek has switch to CCF, so add clock for wm8904 Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91/dt: sam9n12 crystals under the clocks nodeAlexandre Belloni
Having clocks grouped in a subnode is common practice, so move the crystals under a clocks node for the at91sam9n12 SoC and at91sam9n12 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91/dt: define sam9n12ek crystal frequenciesBoris BREZILLON
Define sam9n12ek's main and slow crystal frequencies. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-02-07ARM: at91: enable USB host on at91sam9n12ek boardBo Shen
Enable USB host on at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: add sound support on at91sam9n12ek boardBo Shen
Add sound support on at91sam9n12ek board with wm8904 as codec. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: enable ssc on at91sam9n12ek boardBo Shen
Enable ssc on at91sam9n12ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: enable wm8904 on at91sam9n12ek boardBo Shen
Enable wm8904 codec on at91sam9n12ek board, which is connect to i2c0 bus with 0x1a as address. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-09-06Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-08-21ARM: at91: at91sam9n12: correct pin number of gpio-keyvoice
Correct pin number of gpio-key for at91sam9n12ek board. The pioB4 is connect to LED, the pioB3 use as gpio-key. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9n12: add qt1070 supportvoice
Add qt1070 support on at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-14ARM: at91/DT: fix at91sam9n12ek memory nodeNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.5+
2013-05-31ARM: at91/dts: add the watchdog nodes for at91 boardsWenyou Yang
boards include: at91sam9263ek, at91sam9g20ek, at91sam9m10g45ek, at91sam9n12ek, at91sam9x5ek Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to pinctrl to pre-processorJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to standard GPIO flag defines.Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: use #include for all device treesJean-Christophe PLAGNIOL-VILLARD
to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-02Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
2013-04-24ARM: dts: add spi nodes for the atmel boardsRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: added spi nodes for the sam9263ek, sam9g20ek, sam9m10g45ek and sam9n12ek boards] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-21ARM: at91/dt: gpio-keys: remove address-cells and size-cells propertiesNicolas Ferre
Gpio-keys nodes are not using the "reg" property in their sub nodes. So, there is no need to define #address-cells and #size-cells properties in gpio-keys nodes: we remove them. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-02-07ARM: at91: at91sam9n12: add DT parameters to enable PMECCJosh Wu
Default ecc correctable setting is 2bits in 512 bytes. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-20ARM: at91: dt: add mmc pinctrl for Atmel reference boardsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boardsLudovic Desroches
Add mci controller nodes to atmel boards. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-09-12ARM: dts: add twi nodes for atmel boardsLudovic Desroches
Still use i2c-gpio on boards which have a SoC with a TWI IP which doesn't have clock stretching in transmission mode. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-28ARM: at91: Add DT description files for AT91SAM9N12-EKHong Xu
Added AT91SAM9N12 SoC DT file, as well as the board definition .dts file for AT91SAM9N12-EK. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 03:55:54 +0000