| Age | Commit message (Collapse) | Author |
|---|
|
Remove usless 'fsl,wdog-reset' property in dts on v4.9
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
(cherry picked from commit bfe33c0df6a7cba546fcc5b30609be277f499af2)
|
|
For the slot support SD3.0 card, during system suspend, if plug out
the sd card, and insert another SD3.0 card, after system resume back,
SD3.0 card can't be recognised as SD3.0 card, just SD2.0 card.
This is bause the time delay between vmmc regulator off and on is
too small, this patch add the oo-on-delay in vmmc-supply regulator,
to assign proper delay value.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
|
|
On imx_4.9.y we no longer override the cpu arm/soc/pu-supply properties
to link to pmic directly but rather rely on the regulator core
propagating a set_voltage on a bypassed regulator upwards.
This change was already performance for imx6qdl, now do it for all the
boards using ldo-bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
|
|
system can't detect SD card due to wrong gpio polarity.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
|
|
CMA region is a must to avoid the multile memory mapping
for the DMAed memory and also benifit the large continious
phisical memory allocation.
The default value is depend on the target system design and
user cases definition. This is not suitable to put this into
the soc.dtsi, thus we put it into the board DTS.
customer can override the value by changing cma size in DTS file.
Again, customer need set the CMA size correctly according to the
target system. The incorrectly CMA size can cause Linux kernel fail
to boot up.CMA disabled or CMA size set to zero is also not allowed.
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
|
|
On i.MX6UL, the VDD_ARM_IN and VDD_SOC_IN use the same power rail
VDD_ARM_SOC_IN. For imx6ul-14x14-lpddr2-arm2 board, default, we use
ldo-bypass mode and use the external PMIC regulator for cpufreq.so
on this board, should use the setpoint of ldo-bypass mode.
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit d924e23fa60023bdbc601797ccda30c2c341a34a)
|
|
Add dts for mx6ul-14x14-lpddr2-arm2 board.
Basic function tested: SD1/EMMC2/ENET/UART1 is ok.
This patch takes mx6ul-14x14-ddr3-arm2.dts as a reference.
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 8d10e92ed1b7d49332dec6f28c98250c28cdfa3f)
|
