Age | Commit message (Collapse) | Author |
|
For imx6ull none-emmc device trees enable:
- MXT TS over adapter or connector (board dependent);
- ad7879 support;
- Parallel RGB/VGA capability.
Related-to: ELB-4065
|
|
Move all atmel and fusion touchscreen nodes from board-level
to the main module DT. Prepare the DTs for
use with atmel mxt overlays, adding required pinmux groups.
The common scheme of pin groups for TS overlays:
- pinctrl_atmel_conn - SODIMM 106/107 pins for INT/RST (default)
- pinctrl_atmel_adap - SODIMM 28/30 pins for INT/RST signals.
Related-to: ELB-3868
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Add GPIO line names on module level. Those are all GPIOs which a user
might use on his custom carrier board. If more meaningful names are
available on the carrier board, the user can overwrite the line names
in the carrier board level device tree.
Related-to: ELB-2794
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 59ff254068f0e3638224004081704662d22b1a98)
|
|
Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63
and move the inactive flexcan modes to imx6ull-colibri-eval-v3.dtsi
where they belong.
Note that this commit does not enable flexcan functionality, but rather
eases the effort needed to do so.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 983ff8a6b61e9466beb6b4781fb370a6a7da937a)
Conflicts:
arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
arch/arm/boot/dts/imx6ull-colibri.dtsi
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com
(cherry picked from commit 169685c139d72eee36914727cd4405fee4c2ee9b)
|
|
Boards based on imx6ul have duplicate memory nodes:
- One coming from the board dts file: memory@
- One coming from the imx6ul.dtsi file.
Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pass the memory unit-adress to fix the following build warnings with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
There are cases where dts passes an empty memory node, which will be filled
by the bootloader. Passing the memory base address still allows the
bootloader to fill the memory size.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Computer on Module Colibri iMX6ULL and its
Bluetooth/Wifi variant along with the development/evaluation carrier
board device trees. Follow the usual hierarchic include model,
maintaining shared configuration in imx6ull-colibri.dtsi and
imx6ull-colibri-eval-v3.dtsi respectively.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|