summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3.dtsi
AgeCommit message (Collapse)Author
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: dts: Remove '0x's from OMAP3 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-06-20Merge branch 'for_3.11/dts' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2013-06-19ARM: dts: OMAP3: Include IRQ headerFlorian Vaussard
Some nodes in OMAP3 DTS now use edge or level sensitive interrupts. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-07Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dtOlof Johansson
From Lorenzo Pieralisi, this is a series of patches that cleans up the CPU nodes in most of the SoC dtsi files to conform to the standard bindings. * 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp: ARM: dts: sunxi: cpus/cpu nodes dts updates ARM: dts: spear: cpus/cpu nodes dts updates ARM: dts: sh7372: cpus/cpu nodes dts updates ARM: dts: r8a7740: cpus/cpu nodes dts updates ARM: dts: pxa2xx: cpus/cpu nodes dts updates ARM: dts: prima2: cpus/cpu node dts updates ARM: dts: picoxcell: cpus/cpu nodes dts updates ARM: dts: omap: cpus/cpu nodes dts updates ARM: dts: lpc32xx: cpus/cpu nodes dts updates ARM: dts: imx: cpus/cpu nodes dts updates ARM: dts: exynos5440: cpus/cpu nodes dts updates ARM: dts: at91: cpus/cpu node dts updates ARM: dts: armada-370-xp: cpus/cpu node dts updates ARM: dts: am33xx: cpus/cpu nodes dts updates Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-23ARM: dts: omap: cpus/cpu nodes dts updatesLorenzo Pieralisi
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-05-16ARM: dts: Fix musb interrupt for device tree bootingTony Lindgren
Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09ARM: dts: don't assume boards are using twl4030 for omap3Jason Cooper
If a board isn't using twl4030, then dtc will complain about the missing phandle (which is in twl4030.dtsi). Move the phy declaration to the dts files. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-08ARM/dts: OMAP3: fix pinctrl-single configurationChristoph Fritz
- Fix 'function-mask' referring to TRM (Omap 36xx) Section 13.4.4: "Pad Functional Multiplexing and Configuration". - Fix 'omap3_pmx_wkup' referring to TRM Table 13-6: "Wkup Control Module Pad Configuration Register Fields". Note that these fixes are not critical currently as we are not yet using the missing range of pinmux registers at this point. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-09ARM: dts: OMAP2+: Identify GPIO banks that are always poweredJon Hunter
Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Update DMTIMER compatibility propertyJon Hunter
Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Add SDMA Audio IPs bindingsSebastien Guiriec
Populate DMA client information for McBSP DMIC and McPDM periperhal on OMAP2+ devices. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP3: Add reg and interrupt properties for gpioJon Hunter
The OMAP3 gpio bindings are currently missing the reg and interrupt properties and so add these properties. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP3+: Correct gpio #interrupts-cells propertyJon Hunter
The OMAP gpio binding documention [1] states that the #interrupts-cells property for gpio controllers should be 2. Currently, for OMAP3+ devices the #interrupt-cells is set to 1. By setting this property to 2, it allows clients to pass a 2nd parameter indicating the sensitivity (level or edge) and polarity (high or low) of the interrupt. The OMAP gpio controllers support these options and so update the #interrupt-cells property for OMAP3+ devices to 2. [1] Documentation/devicetree/bindings/gpio/gpio-omap.txt Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Add SDMA controller bindings and nodesJon Hunter
Add SDMA controller binding for OMAP2+ devices and populate DMA client information for SPI and MMC peripheral on OMAP3+ devices. Please note that OMAP24xx devices do not have SPI and MMC bindings available yet and so DMA client information is not populated. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Add PMU nodesJon Hunter
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices. Please note that the node for OMAP4460 has been placed in a separate header file for OMAP4460, because the node is not compatible with OMAP4430. The node for OMAP4430 is not included because PMU is not currently supported on OMAP4430 due to the absence of a cross-trigger interface driver. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boardsKishon Vijay Abraham I
Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-<board>.dts file. The dt data specifies among others the interface type (ULPI or UTMI), mode which is mostly OTG, power that specifies the amount of power this can supply when in host mode. The information about usb otg node is available @ Documentation/devicetree/bindings/usb/omap-usb.txt Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP3: reduce GPMC mapped registers address spaceJavier Martinez Canillas
Currently the OMAP General-Purpose Memory Controller (GPMC) device node maps 16 MB of address space for its hardware registers. This is because the OMAP Technical Reference Manual says that the GPMC module register address space size is 16 MB. But in practice the maximum address offset used by a GPMC register is 0x02d0. So, there is no need to map such a big address space for GPMC regs. This change was suggested by Jon Hunter [1]. [1]: https://patchwork.kernel.org/patch/2057111/ Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP3: Add GPMC controllerFlorian Vaussard
Add device-tree support for the GPMC controller on the OMAP3. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-02ARM: dts: OMAP3: Add HS USB Host IP nodesRoger Quadros
Adds device nodes for HS USB Host module, TLL module, OHCI and EHCI controllers. CC: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-29ARM: dts: OMAP: Add counter-32k nodesJon Hunter
Adds the counter-32k timers nodes present in OMAP2/3/4 devices and device-tree binding documentation for OMAP counter-32k. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: OMAP: Add timer nodesJon Hunter
Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplicationBenoit Cousson
The interrupt-parent attribute does not have to be added in each node since the fmwk will check for the parent as well to get it. Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the attributes from every nodes that were using it. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Sebastien Guiriec <s-guiriec@ti.com>
2012-10-22ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audioPeter Ujfalusi
Fixes the following errors: [ 2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel [ 2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel Which is because we failed to link the sidetone hwmod for McBSP2/3. The missing sidetone hwmod link will prevent omap_device_alloc() to append the DMA resources since we - accidentally - end up having the same number of resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports without the ST resources. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10arm/dts: Add pinctrl driver entries for omap2/3/4Tony Lindgren
Add pinctrl driver entries for omap2+. These all use the generic pinctrl-single driver for the padconf registers. Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Linus Walleij <linus.walleij@linaro.org> [tony@atomide.com: updated to drop omap2420.dtsi rename changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xmTony Lindgren
The extra serial port is not available on 34xx. And the current omap3-beagle.dts file is for omap3-beagle-xm.dts as it lists 512MB of memory. Please somebody submit a new omap3-beagle.dts for the original 34xx BeagleBoard after testing it properly. Cc: Benoit Cousson <b-cousson@ti.com> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-07ARM: dts: omap3: Add McBSP entriesPeter Ujfalusi
Create the needed sections to be able to probe McBSP ports via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-09arm/dts: add wdt node for omap3 and omap4Xiao Jiang
Add wdt node to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-14arm/dts: OMAP3: Add mmc controller nodes and board dataRajendra Nayak
Add OMAP mmc related device tree data for OMAP3. Currenly limited to only omap3-beagle board. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-03-12arm/dts: OMAP3: Add SPI controller nodesBenoit Cousson
Add the 4 McSPI controller nodes present in an OMAP3 device. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-03-12arm/dts: OMAP3: Add gpio nodesBenoit Cousson
Add the 6 GPIOs controller nodes present in OMAP3. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-02-27arm/dts: OMAP3: Add interrupt-controller bindings for INTCBenoit Cousson
Update the DTS with the proper information required by the INTC bindings. - Add the number of interrupt lines - Add the reg and the compatible entries. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-24Merge branch 'for_3.4/dts_updates' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into dt
2012-02-24arm/dts: OMAP3: Add i2c controller nodesBenoit Cousson
Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-02-16arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodesBenoit Cousson
Follow the DTS convention and thus name the nodes <name>@<address> without any '0x' prefix in the physical address. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-12-16ARM: omap: pass minimal SoC/board data for UART from dtRajendra Nayak
Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-04arm/dts: OMAP3+: Add mpu, dsp and iva nodesBenoit Cousson
Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-10-04arm/dts: Add initial device tree support for OMAP3 SoCBenoit Cousson
Add initial OMAP3 soc file with empty ocp bus. Based on initial patch from Manju: http://www.spinics.net/lists/linux-omap/msg55830.html Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-01 20:13:48 +0000