summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
AgeCommit message (Collapse)Author
2019-06-21ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulatorFabrizio Castro
SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 9eb36b945b5c ("ARM: dts: iwg23s-sbc: Add uSD and eMMC support") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: renesas: Use ip=on for bootargsMagnus Damm
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable HS-USBBiju Das
Enable HS-USB device for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB USB2.0 HostBiju Das
Enable USB2.0 host on the iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: iwg23s-sbc: Enable USB Phy[01]Biju Das
Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-25ARM: dts: iwg23s-sbc: Add HDMI supportFabrizio Castro
This patch adds HDMI video output support to the iwg23s board from iWave. Due to a problem with the bootloader not dealing with the configuration of one of the pins correctly, we have to use a gpio-hog for the interrupt line to make sure the pin is configured as GPIO-input when requesting the interrupt. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: iwg23s-sbc: Enable RTCBiju Das
Enable NXP pcf85263 real time clock for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add QSPI flash supportFabrizio Castro
This commit adds QSPI flash support to the iwg23s board specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVBBiju Das
Adding pinctrl support for EtherAVB interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Enable cmt0Biju Das
This patch enables cmt0 support on the iWave iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Enable watchdog supportBiju Das
This patch enables watchdog support on the iWave iwg23s sbc. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: iwg23s-sbc: Add uSD and eMMC supportFabrizio Castro
Add uSD card and eMMC support to the iwg23s single board computer powered by the RZ/G1C SoC (a.k.a. r8a77470). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQBiju Das
Specify EtherAVB PHY IRQ in the board specific device tree, now that we have GPIO support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: iwg23s-sbc: Add pinctl support for scif1Biju Das
Adding pinctrl support for scif1 interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-30ARM: dts: iwg23s-sbc: Add EtherAVB supportBiju Das
Define the iW-RainboW-G23S board dependent part of the EtherAVB device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1CBiju Das
Add support for iWave iW-RainboW-G23S single board computer based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-30 00:44:25 +0000