summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ste-nomadik-s8815.dts
AgeCommit message (Collapse)Author
2013-11-28ARM: nomadik: get rid of explicit ethernet GPIO managementLinus Walleij
We used to set up the GPIO used for the SMC ethernet IRQ by requesting the GPIO line explicitly. As we recently established that specifying the GPIO controller as interrupt parent and requesting one of its interrupts by reference should be enough, we do away with this. Incidentally, the Nomadik GPIO chip driver handles this just fine: the IRQ is set up and fired as expected. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-20Merge tag 'nomadik-dt-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Nomadik DT and clock work: - Lee Jones' pinctrl compat ontology patches - A real clock driver for the Nomadik, 100% DT-based - Device tree changes for the Nomadik clocks * tag 'nomadik-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms ARM: nomadik: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS Conflicts: arch/arm/boot/dts/ste-nomadik-s8815.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20ARM: nomadik: add the new clocks to the device treeLinus Walleij
This revamps the device tree to fit with the new clock implementation and brings it quite a bit closer to how the hardware actually works. After this the clock implementation knows about all clock gates and will gate off all unused clocks at boot time and save a bit of power. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27Merge tag 'nomadik-dt-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Device tree patches for the Nomadik machine: - Move clock registration to the device tree - Support probing the MTU timer from the device tree - Register user LED and user key in the device tree - Update defconfig to account for user LED and user key - Move pin control mappings to the device tree * tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: move the pin configuration to DT ARM: nomadik: add led and key for S8815 ARM: nomadik: register clocksource from device tree ARM: nomadik: convert all clocks except timer to dt clocksource: nomadik-mtu: support of probe Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-26ARM: nomadik: move the pin configuration to DTLinus Walleij
This moves the pin configuration for the Nomadik over to the device tree using Gabriel's bindings. Remove the auxdata nailing down the name of the pin controller as this is no longer necessary. Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-26ARM: nomadik: add led and key for S8815Linus Walleij
This adds device tree hunks for the LED and userbutton on the USB S8815 board, and set up a heartbeat trigger on the LED and an escape key on the user button. Alter the defconfig to enable these standard DT-enabled GPIO drivers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20ARM: nomadik: fix IRQ assignment for SMC ethernetLinus Walleij
The assignment of IRQ for the SMC91x ethernet adapter had two problems making it non-working: - It was not put into the ethernet device node. Let's do this by using the board-specific overlay, so we can make other overlays on other Nomadik boards. - The IRQ number was actually completely wrong, this was the number for NHK8815, not S8815. After this ethernet starts working on the USB S8815. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-28ARM: nomadik: migrate MMC/SD card support to device treeLinus Walleij
This moves over the MMC/SD card support to the device tree probe path. The special GPIO to bias the card detect line is kept, but the pin property is moved to the device tree as part of the MMC/SD card node. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28ARM: nomadik: convert SMSC91x ethernet to device treeLinus Walleij
This converts the SMSC91x ethernet controller to use device tree. The existing solution from the board file, to request the GPIO triggering the ethernet IRQ from the board file is kept for the time being, but the GPIO number assignment is moved over to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28ARM: nomadik: initial devicetree supportLinus Walleij
Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ controllers, system timer, l2x0 cache, UARTs and thus console boot is fully functional. Patch out the code adding devices by initcalls for now so as not to disturb the boot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>