summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
AgeCommit message (Collapse)Author
2016-01-25ARM: dts: sun4i: Add touchscreen node to inet97fv2 dts fileHans de Goede
Add a node describing the focaltech ft5306de4 touchscreen found on inet97fv2 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27ARM: dts: sun4i: inet97fv2: Enable i2c1 and i2c2 controllersHans de Goede
Enable i2c1 and i2c2 controllers, these are used for the touchscreen resp. the accelerometer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27ARM: dts: sun4i: inet97fv2: Enable support for tablet keysHans de Goede
Enable support for the tablet keys which are connected via the lradc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27ARM: dts: sun4i: inet97fv2: Enable otg controllerHans de Goede
Enable the otg controller on the inet97fv2 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27ARM: dts: sun4i: inet97fv2: Add regulator nodesHans de Goede
Use axp209.dtsi and add regulator nodes for the regulators used on the inet97fv2 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27ARM: dts: sun4i: inet97fv2: Disable unused usb controllersHans de Goede
The inet97fv2 tablet only has a usb-2 wifi device connected to the second ehci controller, disable the first ehci controller and both ohci controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-10ARM: sunxi: dt: Remove the FSF addressMaxime Ripard
The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard
Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sun4i: inet97fv2: Convert to DT label based syntaxMaxime Ripard
In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard
Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert to device tree includesMaxime Ripard
Prepare the device trees to use the C preprocessor. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-21ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11Maxime Ripard
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Carlo Caione <carlo@caione.org> Acked-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-07-01ARM: dts: sun4i: Add AXP209 support to various boardsCarlo Caione
At a node for the axp209, and where necessary the i2c controller to the dts for various boards. Note the axp209 regulators are omitted as we don't have any use for them yet, and on some boards were not sure how exactly they are wired up. Adding support for just the axp209 without the regulators is still useful, as it will give us power-button and poweroff support. Signed-off-by: Carlo Caione <carlo@caione.org> [hdegoede@redhat.com: Drop the regulator bits for now] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-11ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodesHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04ARM: dts: sun4i: Enable mmc controller on various A10 boardsHans de Goede
Tested on a subset of these boards, for the others boards the settings match the ones of the tested boards according to the original firmware fex files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add support for the INet-97F_Rev_02 boardDavid Lanzendörfer
This patch adds basic support for the INet-97F_Rev_02 board found in various low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02) Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-14 14:02:26 +0000