summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
AgeCommit message (Collapse)Author
2017-05-19ARM: sun5i: a10s-olinuxino: Enable HDMIMaxime Ripard
The A10s Olinuxino has an HDMI connector. Make sure we can use it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-05-14ARM: sunxi: common-regulators: Drop pinmux settings for GPIO pinsChen-Yu Tsai
As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the pinmux settings for the common regulators defined in sunxi-common-regulators.dtsi. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-27ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h headerChen-Yu Tsai
All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm/boot/dts/sun?i*.* arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra empty line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-06ARM: sun5i: Add UART2 pin groupMaxime Ripard
There's one UART2 pin group that can be used across all sun5i SoCs. However, the A10s already has one pin group for that controller. Change the index of the one in the A10s DTSI, and add the common one to sun5i.dtsi Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-06ARM: sun5i: A10s: Switch the EMAC pins indicesMaxime Ripard
One of the pins group for the EMAC can be used by all the SoCs of the sun5i family, and as such can be moved to the common DTSI. Unfortunately, this group is the second one we declare in our DT for now. Make it the first one so that it's more logical and consistent with the rest of our DTs before moving it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-26ARM: sunxi: Convert pinctrl nodes to generic bindingsMaxime Ripard
Now that we can handle the generic pinctrl bindings, convert our DT to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-26ARM: sunxi: Remove useless allwinner,pull propertyMaxime Ripard
The allwinner,pull property set to NO_PULL was really considered our default (and wasn't even changing the default value in the code). Remove these properties to make it obvious that we do not set anything in such a case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-26ARM: sunxi: Remove useless allwinner,drive propertyMaxime Ripard
The allwinner,drive property set to 10mA was really considered as our default. Remove all those properties entirely to make that obvious. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22ARM: sun5i: Rename A10s pinsMaxime Ripard
The SPI2 pins on the sun5i PB bank are only available on the A10s. Rename the A10s only bank so that it doesn't confuse people on the other SoCs whose indexing would start at b. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-07-04ARM: dts: sun5i: add spi2 on A10s Olinuxino MicroMichal Suchanek
spi2 is available on the UEXT connector Signed-off-by: Michal Suchanek <hramrach@gmail.com> [Maxime: Fixed the node order] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-27dts: sunxi: correct vendor prefix on OLinuXino a10s microOlliver Schinagl
The OLinuXino A10S micro features an eeprom. According to the eeprom.txt binding document, we should use the manufacturer and 'at' is not the proper manufacturer id according to the vendor-prefixes. This patch takes the proper vendor-prefix and uses it for the eeprom node. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno MicroHans de Goede
Enable the otg/drc usb controller on the A10s OLinuxIno Micro. Note the A10s OlinuxIno Micro always has some voltage on its otg power pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is enough to make vbus-det always report 1, so we do not use vbus-det on this board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-09ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmicMichal Suchanek
Add a node for axp152 pmic used on the A10s-OLinuxIno SBC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-01ARM: dts: sun5i: Add A10s and A13 SRAM and SRAM controllerMaxime Ripard
The A10s and A13 have a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Add the SRAM controller, the SRAM that it drives and the section that can be used by the various devices. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2015-05-10ARM: sunxi: dt: Remove the FSF addressMaxime Ripard
The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard
Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sun5i: a10s: olinuxino micro: Convert to DT label based syntaxMaxime Ripard
In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-17Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-01-25ARM: sunxi: dt: Fix aliasesMaxime Ripard
Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT aliases") made the serial driver now use the serial aliases to get the tty number, pointing out that our aliases have been wrong all along. Remove them from the DTSI and add custom ones in the relevant boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard
The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard
Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun5i: Add lradc nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-21ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11Maxime Ripard
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Emilio López <emilio@elopez.com.ar> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-05-11ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodesHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boardsHans de Goede
The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-microHans de Goede
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun5i: dt: Fix A10s SoC bus base addressMaxime Ripard
There was a typo in the base address used for the soc node in the A10s device tree. Fix it with the proper base address. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-15ARM: sun5i: dt: Add AT24 device on A10S-OLinuXino-MicroEmilio López
This OLIMEX board has a AT24C16BN-SH EEPROM holding the MAC address. This patch adds the corresponding device tree node to reflect this. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-07-15ARM: sun5i: dt: Enable I2C controllers on A10S-OLinuXino-MicroEmilio López
This board from OLIMEX is using the three I2C controllers present on A10S: * I2C-0 connects to the AXP152 PMU * I2C-1 holds an AT24C16BN-SH EEPROM with the MAC address for ethernet * I2C-2 is used for UEXT modules. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-19ARM: sunxi: Add Olimex A10s-Olinuxino-micro device treeMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Acked-by: Emilio López <emilio@elopez.com.ar>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-27 21:40:41 +0000