summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Expand)Author
2020-02-09arm: dts: apalis/colibri qdl: add 3rd pwm parameter to specify pos. neg. logicMax Krummenacher
2020-02-09ARM: dts: apalis/colibri-imx6: Get missing devicetrees from 4.9Philippe Schenker
2020-02-09ARM: dts: imx6ull-colibri: Add touchscreens used with Eval BoardPhilippe Schenker
2020-02-09ARM: dts: imx6ull-colibri: Add general wakeup key used on ColibriPhilippe Schenker
2020-02-09ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher
2020-02-09ARM: dts: imx6ull-colibri: Add watchdogPhilippe Schenker
2020-02-09ARM: dts: imx6ull: improve can templatesMax Krummenacher
2020-02-09ARM: dts: imx6ull-colibri: Add sleep mode to fecPhilippe Schenker
2020-02-09ARM: dts: imx6ull-colibri: change touch i2c parametersMax Krummenacher
2020-02-09ARM: dts (ds): imx6ull: fix pwm clockMax Krummenacher
2020-02-09ARM: dts (ds): imx6ull: include all needed definitionsMax Krummenacher
2020-02-09ARM: dts (ds): imx6ull: add support for PWM polarity controlMax Krummenacher
2020-02-09ARM: dts: imx6ull: Add Aster devicetrees from 4.9Philippe Schenker
2020-02-09ARM: dts: imx6: Pass memory unit-adressFabio Estevam
2020-02-09ARM: dts: imx6ul: Fix memory node duplicationFabio Estevam
2020-02-09ARM: dts (ds): Remove ENET1_CRS pinmux as this is used for usb otgPhilippe Schenker
2020-02-09ARM: dts (ds): imx7-colibri: Remove regulator linkPhilippe Schenker
2020-02-09ARM: dts: Remove fsl,tuning-stepMarcel Ziswiler
2020-02-09ARM: dts: colibri-imx7: Add mdio phy nodeMarcel Ziswiler
2020-02-09ARM: dts: enable gpmi for the iMX7 eMMC 1GB variantPhilippe Schenker
2020-02-09ARM: dts: add UHS-I pinmuxingPhilippe Schenker
2020-02-09ARM: dts: add touch controllers that are used with this boardPhilippe Schenker
2020-02-09ARM: dts: colibri: preparations for adding aster devicetreePhilippe Schenker
2020-02-09ARM: dts: colibri-imx7: add new gpio hog grpBhuvanchandra DV
2020-02-09ARM: dts: imx7-colibri: add alias for RTC and disable SNVS powerkeyStefan Agner
2020-02-09ARM: dts: Add Aster devicetrees from 4.9Philippe Schenker
2020-02-09Revert "MLK-13548 ARM: dts: imx: Add 1.2GHz setpoint for imx7d"Stefan Agner
2020-02-09ARM: dts (ds): imx7: merge changes from toradex_4.9-2.3.x-imx-nextPhilippe Schenker
2020-02-09ARM: dts: imx7-colibri: fix 1.8V/UHS supportStefan Agner
2020-02-09ARM: dts: imx7-colibri: add GPIO wakeup keyStefan Agner
2020-02-09ARM: dts: add recovery for I2C for iMX7Oleksandr Suvorov
2020-02-09ARM: dts: imx7-colibri: Add sleep mode to ethernetPhilippe Schenker
2020-02-09ARM: dts: imx7-colibri: prepare module device tree for FlexCANPhilippe Schenker
2020-02-09ARM: dts: imx7-colibri: disable HS400Stefan Agner
2020-02-09colibri_imx7: make sure module supplies are always onMarcel Ziswiler
2020-02-09ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modulesPhilippe Schenker
2020-02-09ARM: dts: colibri: use valid range configuration for weimStefan Agner
2020-02-09ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drainStefan Agner
2020-02-09ARM: dts: imx7: Fix memory node duplicationFabio Estevam
2020-02-09ARM: dts: imx6q-apalis: mux RESET_MOCI# signalStefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: remove unused pinctrl groupsStefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: assign VDDD to SGTL5000Stefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: fix on-module regulatorsStefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: remove 1.8V regulatorStefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: disable read-only switchStefan Agner
2020-02-09ARM: dts: imx6qdl-apalis/-colibri: prevent 1.8V modesStefan Agner
2020-02-09ARM: dts: imx6q-apalis-eval: add carrier board 3.3V supplyStefan Agner
2020-02-09ARM: dts: imx6q-apalis: add chosen nodeStefan Agner
2020-02-09ARM: dts: imx6qdl-colibri: use pull-down on wake-up pinStefan Agner
2020-02-09ARM: dts: imx6qdl-colibri: move card detect to module device treeStefan Agner