summaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2019-01-29apalis/colibri t20/t30: defconfig: Add nf_filterColibri-T30_LXDE-Image_2.8b6.184-20190401Colibri-T20_LXDE-Image_2.8b6.184-20190401Apalis-T30_LXDE-Image_2.8b6.184-20190401Philippe Schenker
For iptables filtering to work we need the NF_FILTER kernel module. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2017-12-21apalis/colibri_t20/t30_defconfig: enable user debugStefan Agner
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-12-21tegra: apalis_t30: colibri_t30: colibri_t20: user crypto in defconfigDominik Sliwa
Add user crypto to defconfigs. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-26ARM: mach-tegra: colibri_t30: integrate atmel mxt multitouch controllerColibri-T30_LXDE-Image_2.7b4-20171005Colibri-T20_LXDE-Image_2.7b4-20171005Apalis-T30_LXDE-Image_2.7b4-20171005Bhuvanchandra DV
Integrate Atmel MXT multitouch controller driver which is interfaced over I2C bus. The driver supports the 7" multitouch variant available from Logic Technologies. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-26ARM: mach-tegra: colibri_t20: integrate atmel mxt multitouch controllerBhuvanchandra DV
Integrate Atmel MXT multitouch controller driver which is interfaced over I2C bus. The driver supports the 7" multitouch variant available from Logic Technologies. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-26ARM: mach-tegra: apalis_t30: integrate atmel mxt multitouch controllerBhuvanchandra DV
Integrate Atmel MXT multitouch controller driver which is interfaced over I2C bus. The driver supports the 7" multitouch variant available from Logic Technologies. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-20colibri_t20: update defconfig for wifiDominik Sliwa
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-20colibri_t30: update defconfig for wifiDominik Sliwa
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-09-20apalis_t30: update defconfig for wifiDominik Sliwa
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-30apalis/colibri_t30: snapd squashfs configurationColibri-T30_LXDE-Image_2.7b3-20170630Colibri-T20_LXDE-Image_2.7b3-20170630Apalis-T30_LXDE-Image_2.7b3-20170630Marcel Ziswiler
Prepare for snapd integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-06-30apalis/colibri_t30: drop TPS65910 driver in favour of TPS6591X oneMarcel Ziswiler
Rather than the TPS65910 driver the TPS6591X one is in use and to avoid any confusion we drop the former completely. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-01-11apalis/colibri_t20/t30: disable ext4 configurationColibri_T30_LinuxImageV2.7Beta1_20170112Colibri_T20_LinuxImageV2.7Beta1_20170112Apalis_T30_LinuxImageV2.7Beta1_20170112Marcel Ziswiler
As ext4 is known to cause issues on that ancient NVIDIA L4T kernel just disable it in favour of ext3 which is known to be working fine. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-01-11apalis/colibri_t20/t30: configure IPv6 SIT driver as moduleStefan Agner
SIT tunnels (IPv6 over IPv4) are not often used hence configure the driver as a module. This also gets rid of the extra network interface sit0 by default. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-06-22apalis_t30: v4l2: Epson S2D13P04 integrationBhuvanChandra.DV
Integrate Epson S2D13P04 video decoder support. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-06-22apalis/colibri_t30: modularise wi-fi configurationMarcel Ziswiler
Modularise our Wi-Fi configuration meaning build support for our former Ralink RT3070 based Ambicom WL250N as module as well plus while at it enable support for newer Ralink RT5370 based common Wi-Fi USB sticks as well. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-03-21apalis/colibri_t20/t30: synchronize USB serial optionsStefan Agner
Compile USB device classes such as WDM and CDC ACM as modules. Enable USB driver for GSM and CDMA modems (Option and others). Also enable USB serial console option which allows to use a USB serial device as a serial console at boot time. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2015-12-15apalis/colibri_t20/t30: Add multitouch HID supportStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2015-11-24apalis/colibri_t20/t30: Enable RTL8192CU driverBhuvanchandra DV
Enable RTL8192CU driver to support LM006 USB WiFi adapter. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2015-06-09apalis_t30: ov5640 csi camera sensor supportMarcel Ziswiler
Integrate OV5640 CSI camera sensor support.
2015-05-12apalis/colibri_t20/t30: clean-up module deploymentMarcel Ziswiler
Bring the kernel module configuration more in line with what we currently really deploy. As a second step we can then change the way kernel modules are actually deployed by just deploying them all.
2015-05-12Merge branch 'tegra-nand-next' into tegra-nextMarcel Ziswiler
2015-04-27apalis_t30_defconfig add generic PCIe SATA/AHCI driverMarcel Ziswiler
CONFIG_SATA_AHCI=m This allows using PCIe cards with a SATA interface.
2015-04-02colibri_t20: initial 16-bit BCH ECC supportMarcel Ziswiler
2015-03-30Merge remote-tracking branch 'remotes/ubifs-v3.1/master' into tegra-nand-nextMarcel Ziswiler
Conflicts: drivers/mtd/ubi/ubi.h drivers/mtd/ubi/wl.c
2015-03-19apalis/colibri_t20/t30: enable module versioning supportColibri_T20_LinuxImageV2.3_20150320Marcel Ziswiler
Enable module versioning support (CONFIG_MODVERSIONS and CONFIG_MODULE_SRCVERSION_ALL) which allows using kernel modules across different kernel builds/versions. While at it also update the Android configurations.
2015-02-03eMMC: Enable deferred resume functionban_feng
Change-Id: I40a8481618b1a5995a713ff343c7532badd20b65 Change-Id: I399302118c9d8d8246a4a304ff7a1ea80889dbc6 Reviewed-on: http://mcrd1-5.corpnet.asus/code-review/master/45568 Reviewed-by: Ban Feng <Ban_Feng@asus.com> Tested-by: Ban Feng <Ban_Feng@asus.com> Reviewed-by: Sam hblee <Sam_hblee@asus.com> (cherry picked from commit 121c0c6dffe16c683f4dbf00ed841fb4de1f70a0) Conflicts: drivers/mmc/core/mmc.c
2015-01-09media: Added Analog Devices ADV7280 video decoder driverWojciech Bieganski
2014-12-18apalis_t30: optional mmc uhs support (v1.1a and later hw)Colibri_T30_LinuxImageV2.3Beta5_20141219Colibri_T20_LinuxImageV2.3Beta5_20141219Apalis_T30_LinuxImageV2.3Beta5_20141219Marcel Ziswiler
This patch adds optional UHS support for the 8-bit MMC controller. Please note that this requires V1.1A or later module hardware plus the pull-up resistors on the data as well as the command signal lines of your carrier board need to be removed (e.g. R46 to R54 on our Apalis Evaluation Board V1.1A). If those pre-requisites are met support can be enabled using the following kernel command line parameter: mmc_uhs=1
2014-07-26apalis/colibri t20/t30: enable vlan functionalityMarcel Ziswiler
Enable VLAN networking functionality. While at it also enable some more kernel modules for Apalis T30 PCIe based devices like the Intel E1000E NICs, Intel IWLAGN Wi-Fi cards, PCIe serial cards and XHCI based USB 3.0 controllers.
2014-07-25apalis/colibri t30: use hda hdmi audio and split sound initMarcel Ziswiler
Use HDA HDMI audio now on Colibri T30 as well allowing for up to 7.1 multi-channel playback. Split board sound initialisation between Apalis and Colibri T30 in order to distinguish better between default SPDIF being supported out-of-the-box on Apalis vs. this being an optional feature for the Colibri. Therefore remove SPDIF for the Colibri T30. While at it add csus clock required for vi_sensor camera master clock on Apalis T30 and clk_out_2/extern2 for Colibri T30, fix debug UART1 initialisation, get rid of spurious CONFIG_SND_USB enable and further clean-up both board platform data files.
2014-07-25apalis/colibri t20/t30: enable fhandle for systemdMarcel Ziswiler
Enable CONFIG_FHANDLE required for systemd >= 209 according to lists.freedesktop.org/archives/systemd-devel/2014-February/017362.html While at it put them all 3 on par concerning ARM Errata configuration.
2014-03-31apalis_t30: ieee 1588 ptp supportMarcel Ziswiler
Enable IEEE 1588 precision time protocol (PTP) support.
2014-03-13added Aptina AS0260SOC driverWojciech Bieganski
2014-03-13OV7670 and TVP5150 drivers added, updated configsWojciech Bieganski
2014-03-12Merge branch 'l4t/l4t-r16-r2' into colibriMarcel Ziswiler
Conflicts: drivers/media/video/tegra_v4l2_camera.c reverted to current driver supporting ACM rather than CSI2 drivers/media/video/videobuf2-dma-nvmap.c drivers/video/tegra/host/Makefile
2014-02-04apalis_t30: add Fusion touchscreen driverStefan Agner
Activate Fusion touchscreen driver. Use GPIO 5/6 as pen down/reset GPIO and provide a helper function to free the GPIO before the driver requests them.
2014-01-29colibri_t20/colibri_t30: use new platform data for fusion touchscreenStefan Agner
Fusion touchscreen driver now uses platform data to do GPIO initialization by itself. Make use of this by providing GPIO numbers instead of doing initialization in the board initialization.
2013-12-13colibri_t20: android: disable hw stat monMarcel Ziswiler
Disable hardware statistics monitor for AVP due to it completely hanging upon boot on certain Colibri T20 V1.2a modules.
2013-12-09colibri_t30/apalis_t30: enable STMPE ADC driverStefan Agner
Make use of the new STMPE ADC driver to expose the four free ADC channels on the STMPE811 to userspace.
2013-11-18Revert "media: camera config changes"Vikram Fugro
This reverts commit dd9a841da571a41d43f1eeaac1785b2adb1d80f3. The config changes (for V4L2) can be done manually as per need basis for V4L2, followed by compiling the kernel. Change-Id: I9174bce0f3da2974ab703b238dfb8fb3bbf607c5 Signed-off-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-on: http://git-master/r/327607 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Kaustubh Purandare <kpurandare@nvidia.com> Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-30media: camera config changesVikram Fugro
- Disables TEGRA_CAMERA - Enables SOC_CAMERA and OV5640 sensor support Bug 1369083 Change-Id: I073c226e9f04a6f4f4699051f624a755dceb36cb Signed-off-by: Vikram Fugro <vfugro@nvidia.com> Reviewed-on: http://git-master/r/309491 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-10-21toradex defconfigs: don't set CONFIG_MAGIC_SYSRQMax Krummenacher
If the boot console is RS232 and RX is left floating this leads to arbitrary sys requests including reboots... (RX is left floating on the evaluation boards if USB to serial is jumpered but USB is not connected)
2013-08-06config: tegra3: Turn off R8169 firmware loadingMursalin Akon
The firmware is not being in use currently. So, turn the loading code off. Bug 1236060 Bug 991551 Change-Id: Id41cf762b59502d0ece470e315ac75d93e3b6b39 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/218613 (cherry picked from commit f15976bdfb32d6c5e20057f6d4d57646c15a5591) Reviewed-on: http://git-master/r/258354 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-07-31apalis_t30: enable modular camera configurationMarcel Ziswiler
Enable the modular camera configuration for ACM which allows switching not only decoders but also their inputs at run-time. This is the only correct order to load the modules: modprobe videobuf2-memops modprobe videobuf2-dma-nvmap modprobe max9526 # or modprobe adv7180 modprobe tegra_v4l2_camera To change the decoder on the fly: rmmod tegra_v4l2_camera rmmod max9526 # or rmmod adv7180 modprobe adv7180 # or modprobe max9526 modprobe tegra_v4l2_camera To get a pre-view window through gstreamer: gst-launch v4l2src ! deinterlace tff=1 method=4 ! nv_omx_videomixer ! nv_gl_eglimagesink To switch inputs (0-5 resp. 0-4 for ADV7180 and 0-2 for MAX9526 where 2 means auto selection): v4l2-ctl -i 0 v4l2-ctl -i 1 v4l2-ctl -i 2 v4l2-ctl -i 3 v4l2-ctl -i 4 v4l2-ctl -i 5 To check what input is active: v4l2-ctl -I While at it enable NVIDIA confirmed ARM errata 716044 and 720789 as well.
2013-06-21apalis_t30: fix PCIe by forcing GEN1 speedMarcel Ziswiler
Enable PCI quirk support resp. don't explicitly disable it in order for the following fix to take effect. The Apalis evaluation board needs to set the link speed to 2.5 GT/s (GEN1). The default link speed setting is 5 GT/s (GEN2). 0x98 is the Link Control 2 PCIe Capability Register of the PEX8605 PCIe switch. The switch supports link speed auto negotiation, but falsely sets the link speed to 5 GT/s.
2013-06-12apalis_t30: v4l2: adv7180 and max9526 integrationMarcel Ziswiler
Integrate ADV7180 and MAX9526 video decoder support and prepare for drivers as modules. The following gstreamer pipeline shows a preview window: gst-launch v4l2src ! deinterlace tff=1 method=4 ! nv_omx_videomixer ! nv_gl_eglimagesink
2013-03-24colibri_t20: android: kernel configurationMarcel Ziswiler
Add initial Android kernel configuration adopted from tegra_android_defconfig.
2013-03-14apalis_t30: audio: integrate HDA codec supportMarcel Ziswiler
Integrate support for the Realtek ALC898 as found on the Apalis Evaluation Board V1.0a. Please note that the following HDA rewiring needs to be done: remove jumpers X6-5 and 7 to 9 rewire as follows: X5 X7 5 9 7 8 8 5 9 7 Please further note that currently only noise is heard during playback.
2013-03-07ARM: Config: Tegra3:Disabled CONFIG_INPUT_MOUSEDEVNaveen Kumar S
Disabled CONFIG_INPUT_MOUSEDEV to avoid kernel registering PS/2 mouse devices, which are mostly not in use now. Bug 1162832 Change-Id: I0b44af668fa94ffc589e646a842259afa837731e Signed-off-by: Naveen Kumar S <nkumars@nvidia.com> Reviewed-on: http://git-master/r/187807 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2013-03-06ARM: Config: Tegra2: Disabled CONFIG_INPUT_MOUSEDEVNaveen Kumar S
Disabled CONFIG_INPUT_MOUSEDEV to avoid kernel registering PS/2 mouse devices, which are mostly not in use now. Bug 1162832 Change-Id: If47e654063934d3b60d033a0d2523b8caf97825b Signed-off-by: Naveen Kumar S <nkumars@nvidia.com> Reviewed-on: http://git-master/r/187808 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Winnie Hsu <whsu@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-27 10:14:23 +0000