| Age | Commit message (Collapse) | Author |
|---|
|
After a cpufreq transition, update the clockevent's frequency
by fetching the new clock rate from the clock framework and
reprogram the next clock event.
Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Conflicts:
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/net/wireless/Makefile
kernel/power/main.c
sound/soc/soc-core.c
|
|
The smp_twd clockevents driver currently enables the local timer PPI
before the clockevents device is registered. This can lead to a kernel
panic if a spurious timer interrupt is generated before registration
has completed since the kernel will treat it as an IPI timer.
This patch moves the clockevents device registration before the IRQ
unmasking so that we can always handle timer interrupts once they can
occur.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
commit 11ed0ba1754841316d4095478944300acf19acc3 upstream.
This patch implements a workaround for PL310 erratum 769419. On
revisions of the PL310 prior to r3p2, the Store Buffer does not
automatically drain. This can cause normal, non-cacheable writes to be
retained when the memory system is idle, leading to suboptimal I/O
performance for drivers using coherent DMA.
This patch adds an optional wmb() call to the cpu_idle loop. On systems
with an outer cache, this causes an explicit flush of the store buffer.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
If an idle notifier modifies a timer, calling the notifier after
the sched tick has been stopped may leave the sched tick set too
early. Move teh idle notifier call before the call to
tick_nohz_stop_sched_tick.
Change-Id: I0db3284bec6d0193bc5e2a57650ab06bd8342319
Signed-off-by: Colin Cross <ccross@android.com>
|
|
commit 8428e84d42179c2a00f5f6450866e70d802d1d05 upstream.
Recent gcc versions generate unaligned accesses by default on ARMv6 and
later processors. This patch ensures that the SCTLR.A bit is always
cleared on such processors to avoid kernel traping before
alignment_init() is called.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: John Linn <John.Linn@xilinx.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Such that interactive cpufreq governor uses up-to-date idle time
information.
Reported by Colin Cross <ccross@android.com>
Change-Id: I06425444f800f803afc9dc7a6ad0fdb46c918bb6
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
|
|
commit 29a541f6c1f6e4a85628bb86071b9e72c9f8be2c upstream.
Using COHERENT_LINE_{MISS,HIT} for cache misses and references
respectively is completely wrong. Instead, use the L1D events which
are a better and more useful approximation despite ignoring instruction
traffic.
Reported-by: Alasdair Grant <alasdair.grant@arm.com>
Reported-by: Matt Horsnell <matt.horsnell@arm.com>
Reported-by: Michael Williams <michael.williams@arm.com>
Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Patch is the last version from tglx on Oct 7.
Discussion is at: http://comments.gmane.org/gmane.linux.ports.arm.kernel/131919
The original commit message for the first patch version:
Frank Rowand reported:
I have a consistent (every boot) hang on boot with the RT patches.
With a few hacks to get console output, I get:
rcu_preempt_state detected stalls on CPUs/tasks
I have also replicated the problem on the ARM RealView (in tree) and
without the RT patches.
The problem ended up being caused by the allowed cpus mask being set
to all possible cpus for the ksoftirqd on the secondary processors.
So the RCU softirq was never executing on the secondary cpu.
The problem was that ksoftirqd was woken on the secondary processors before
the secondary processors were online. This led to allowed cpus being set
to all cpus.
wake_up_process()
try_to_wake_up()
select_task_rq()
if (... || !cpu_online(cpu))
select_fallback_rq(task_cpu(p), p)
...
/* No more Mr. Nice Guy. */
dest_cpu = cpuset_cpus_allowed_fallback(p)
do_set_cpus_allowed(p, cpu_possible_mask)
# Thus ksoftirqd can now run on any cpu...
</report>
The reason is that the ARM SMP boot code for the secondary CPUs enables
interrupts before the newly brought up CPU is marked online and
active.
That causes a wakeup of ksoftirqd or a wakeup of any other kernel
thread which is affine to the brought up CPU break that threads
affinity and therefor being scheduled on already online CPUs.
This problem has been observed on x86 before and the only solution is
to mark the CPU online and wait for the CPU active bit before the
point where interrupts are enabled.
Change-Id: If948ef52d434191579e1ca95d18d0c50e91a03b9
Signed-off-by: Dima Zavin <dima@android.com>
|
|
Based on a rough patch by frank.rowand@am.sony.com
Since ARM doesn't have an NMI (fiq's are not always available),
send an IPI to all other CPUs (current cpu prints the stack directly)
to capture a backtrace.
Change-Id: I8b163c8cec05d521b433ae133795865e8a33d4e2
Signed-off-by: Dima Zavin <dima@android.com>
|
|
commit f630c1bdfbf8fe423325beaf60027cfc7fd7c610 upstream.
This patch implements a workaround for erratum 764369 affecting
Cortex-A9 MPCore with two or more processors (all current revisions).
Under certain timing circumstances, a data cache line maintenance
operation by MVA targeting an Inner Shareable memory region may fail to
proceed up to either the Point of Coherency or to the Point of
Unification of the system. This workaround adds a DSB instruction before
the relevant cache maintenance functions and sets a specific bit in the
diagnostic control register of the SCU.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This reverts commit c0822d4f0bcccf227b751cfe1c047f3bdae0f1ce.
|
|
Fix a hole in the VFP thread migration. Lets define two threads.
Thread 1, we'll call 'interesting_thread' which is a thread which is
running on CPU0, using VFP (so vfp_current_hw_state[0] =
&interesting_thread->vfpstate) and gets migrated off to CPU1, where
it continues execution of VFP instructions.
Thread 2, we'll call 'new_cpu0_thread' which is the thread which takes
over on CPU0. This has also been using VFP, and last used VFP on CPU0,
but doesn't use it again.
The following code will be executed twice:
cpu = thread->cpu;
/*
* On SMP, if VFP is enabled, save the old state in
* case the thread migrates to a different CPU. The
* restoring is done lazily.
*/
if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) {
vfp_save_state(vfp_current_hw_state[cpu], fpexc);
vfp_current_hw_state[cpu]->hard.cpu = cpu;
}
/*
* Thread migration, just force the reloading of the
* state on the new CPU in case the VFP registers
* contain stale data.
*/
if (thread->vfpstate.hard.cpu != cpu)
vfp_current_hw_state[cpu] = NULL;
The first execution will be on CPU0 to switch away from 'interesting_thread'.
interesting_thread->cpu will be 0.
So, vfp_current_hw_state[0] points at interesting_thread->vfpstate.
The hardware state will be saved, along with the CPU number (0) that
it was executing on.
'thread' will be 'new_cpu0_thread' with new_cpu0_thread->cpu = 0.
Also, because it was executing on CPU0, new_cpu0_thread->vfpstate.hard.cpu = 0,
and so the thread migration check is not triggered.
This means that vfp_current_hw_state[0] remains pointing at interesting_thread.
The second execution will be on CPU1 to switch _to_ 'interesting_thread'.
So, 'thread' will be 'interesting_thread' and interesting_thread->cpu now
will be 1. The previous thread executing on CPU1 is not relevant to this
so we shall ignore that.
We get to the thread migration check. Here, we discover that
interesting_thread->vfpstate.hard.cpu = 0, yet interesting_thread->cpu is
now 1, indicating thread migration. We set vfp_current_hw_state[1] to
NULL.
So, at this point vfp_current_hw_state[] contains the following:
[0] = &interesting_thread->vfpstate
[1] = NULL
Our interesting thread now executes a VFP instruction, takes a fault
which loads the state into the VFP hardware. Now, through the assembly
we now have:
[0] = &interesting_thread->vfpstate
[1] = &interesting_thread->vfpstate
CPU1 stops due to ptrace (and so saves its VFP state) using the thread
switch code above), and CPU0 calls vfp_sync_hwstate().
if (vfp_current_hw_state[cpu] == &thread->vfpstate) {
vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
BANG, we corrupt interesting_thread's VFP state by overwriting the
more up-to-date state saved by CPU1 with the old VFP state from CPU0.
Fix this by ensuring that we have sane semantics for the various state
describing variables:
1. vfp_current_hw_state[] points to the current owner of the context
information stored in each CPUs hardware, or NULL if that state
information is invalid.
2. thread->vfpstate.hard.cpu always contains the most recent CPU number
which the state was loaded into or NR_CPUS if no CPU owns the state.
So, for a particular CPU to be a valid owner of the VFP state for a
particular thread t, two things must be true:
vfp_current_hw_state[cpu] == &t->vfpstate && t->vfpstate.hard.cpu == cpu.
and that is valid from the moment a CPU loads the saved VFP context
into the hardware. This gives clear and consistent semantics to
interpreting these variables.
This patch also fixes thread copying, ensuring that t->vfpstate.hard.cpu
is invalidated, otherwise CPU0 may believe it was the last owner. The
hole can happen thus:
- thread1 runs on CPU2 using VFP, migrates to CPU3, exits and thread_info
freed.
- New thread allocated from a previously running thread on CPU2, reusing
memory for thread1 and copying vfp.hard.cpu.
At this point, the following are true:
new_thread1->vfpstate.hard.cpu == 2
&new_thread1->vfpstate == vfp_current_hw_state[2]
Lastly, this also addresses thread flushing in a similar way to thread
copying. Hole is:
- thread runs on CPU0, using VFP, migrates to CPU1 but does not use VFP.
- thread calls execve(), so thread flush happens, leaving
vfp_current_hw_state[0] intact. This vfpstate is memset to 0 causing
thread->vfpstate.hard.cpu = 0.
- thread migrates back to CPU0 before using VFP.
At this point, the following are true:
thread->vfpstate.hard.cpu == 0
&thread->vfpstate == vfp_current_hw_state[0]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
If the console_lock was held while the system was rebooted, the messages
in the temporary logbuffer would not have propogated to all the console
drivers.
This force releases the console lock if it failed to be acquired.
Change-Id: I193dcf7b968be17966833e50b8b8bc70d5d9fe89
Signed-off-by: Dima Zavin <dima@android.com>
|
|
Change-Id: I5d8e4e85b17bbab7992ecb477f0bdb5e4138b166
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Change-Id: Id833e61c13baa1783705ac9e9046d1f0cc90c95e
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
|
|
To get hundredths of MHz the rate needs to be divided by 10'000.
Here is an example:
twd_timer_rate = 123456789
Before the patch:
twd_timer_rate / 1000000 = 123
(twd_timer_rate / 1000000) % 100 = 23
Result: 123.23MHz.
After being fixed:
twd_timer_rate / 1000000 = 123
(twd_timer_rate / 10000) % 100 = 45
Result: 123.45MHz.
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Ensure that the meminfo array is sanity checked before we pass the
memory to memblock. This helps to ensure that memblock and meminfo
agree on the dimensions of memory, especially when more memory is
passed than the kernel can deal with.
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
armpmu_enable can be called in situations where no events are present
(for example, from the event rotation tick after a profiled task has
exited). In this case, we currently start the PMU anyway which may
leave it active inevitably without any events being monitored.
This patch adds a simple check to the enabling code so that we avoid
starting the PMU when no events are present.
Cc: <stable@kernel.org>
Reported-by: Ashwin Chaugle <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
When we bring a CPU online, we should wait for it to become active
before entering the idle thread, so we know that the scheduler and
thread migration is going to work.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The "Thumb bit" of a symbol is only really meaningful for function
symbols (STT_FUNC).
However, sometimes a branch is relocated against a non-function
symbol; for example, PC-relative branches to anonymous assembler
local symbols are typically fixed up against the start-of-section
symbol, which is not a function symbol. Some inline assembler
generates references of this type, such as fixup code generated by
macros in <asm/uaccess.h>.
The existing relocation code for R_ARM_THM_CALL/R_ARM_THM_JUMP24
interprets this case as an error, because the target symbol appears
to be an ARM symbol; but this is really not the case, since the
target symbol is just a base in these cases. The addend defines
the precise offset to the target location, but since the addend is
encoded in a non-interworking Thumb branch instruction, there is no
explicit Thumb bit in the addend. Because these instructions never
interwork, the implied Thumb bit in the addend is 1, and the
destination is Thumb by definition.
This patch removes the extraneous Thumb bit check for non-function
symbols, enabling modules containing the affected relocation types
to be loaded. No modification to the actual relocation code is
required, since this code does not take bit[0] of the
location->destination offset into account in any case.
Function symbols are always checked for interworking conflicts, as
before.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Without this change a saw an 18% increase in idle power consumption
on one deivce when trace support is compiled into the kernel. Now
I see the same increase only when tracing.
Change-Id: I21bb5ecf1b7d29ce3790ceeb5323409cc22d5a3b
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
If more than one ETM or PTM are present, configure all of them
and enable the formatter in the ETB. This allows tracing on dual
core systems (e.g. omap4).
Change-Id: I028657d5cf2bee1b23f193d4387b607953b35888
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
On some SOCs the read and write pointer are reset when the chip
resets, but the trace buffer content is preserved. If the status
bits indicates that the buffer is empty and we have never started
tracing, assume the buffer is full instead. This can be useful
if the system rebooted from a watchdog reset.
Change-Id: Iaf21c2c329c6059004ee1d38e3dfff66d7d28029
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
It is not safe to call etm_lock or etb_lock without holding the
mutex since another thread may also have unlocked the registers.
Also add some missing checks for valid etb_regs in the etm sysfs
entries.
Change-Id: I939f76a6ea7546a8fc0d4ddafa2fd2b6f38103bb
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
The old code enabled data tracing, but did not configure the
range. We now configure it to trace all data addresses by default,
and add a trace_data_range attribute to change the range or disable
data tracing.
Change-Id: I9d04e3e1ea0d0b4d4d5bcb93b1b042938ad738b2
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Trace kernel text segment by default as before, allow tracing of other
ranges by writing a range to /sys/devices/etm/trace_range, or to trace
everything by writing 0 0.
Change-Id: Ibb734ca820fedf79560b20536247f1e1700cdc71
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
If the write address was at the end of the buffer, toggling the trace
capture bit would set the RAM-full status instead of clearing it, and
if any of the stop bits in the formatter is set toggling the trace
capture bit may not do anything.
Instead use the read position to find out if the data has already
been returned.
This also fixes the read function so it works when the trace buffer is
larger than the buffer passed in from user space. The old version
would reset the trace buffer pointers after every read, so the second
call to read would always return 0.
Change-Id: I75256abe2556adfd66fd5963e46f9e84ae4645e1
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
On some systems kernel code is considered secure, and this code
already limits tracing to the kernel text segment which results
in no trace data.
Change-Id: I098a0753e874859446d098e1ee209f67fc13cd5d
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
If clk_get fail, assume the etb does not need a separate clock.
Change-Id: Ia0bf3f5391e94a60ea45876aa7afc8a88a7ec3bf
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
If the PC on the stack is updated in entry-armv.S,
do_undefinstr can get called after the fixup. do_undefinstr
does its own fixup, and doing both causes the PC to point to
half way through an instruction.
Instead, do the fixup in do_vfp, where only the vfp code
can get called.
Change-Id: I6d966887adc8ed58d88bfe0cb3c0ba29213be488
Signed-off-by: Colin Cross <ccross@android.com>
|
|
The exception handler in entry-armv.S checks for thumb mode and
correctly determines the exception location and instruction,
but VFP_bounce uses the uncorrected location off the stack.
If the VFP exception occured in Thumb mode, fix up the
exception location on the stack to match the value that would
be returned in ARM mode.
Fixes segfaults in userspace applications running in Thumb mode
caused by a handled VFP exception returning to the middle of the
instruction that triggered the exception.
Change-Id: I02be4c5b546561d9a967a02c1e9eb1de876cff07
Original-author: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Colin Cross <ccross@android.com>
|
|
We can't be holding the mmap_sem while calling flush_cache_user_range
because the flush can fault. If we fault on a user address, the
page fault handler will try to take mmap_sem again. Since both places
acquire the read lock, most of the time it succeeds. However, if another
thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in
between the call to flush_cache_user_range and the fault, the down_read
in do_page_fault will deadlock.
Also, since we really can't be holding the mmap_sem while calling
flush_cache_user_range AND vma is actually unused by the flush itself,
get rid of vma as an argument.
Change-Id: If55409bde41ad1060fa4fe7cbd4ac530d4d9a106
Signed-off-by: Dima Zavin <dima@android.com>
|
|
This is extremely useful in diagnosing remote crashes, and is based heavily
on original work by <md@google.com>.
Signed-off-by: San Mehat <san@google.com>
Cc: Michael Davidson <md@google.com>
[ARM] process: Use uber-safe probe_kernel_address() to read mem when dumping.
This prevents the dump from taking pagefaults / external aborts.
Signed-off-by: San Mehat <san@google.com>
|
|
Dump out the following 16-bit instruction to the faulting instruction
in the Code: line. This allows Thumb-2 instructions to be properly
encoded.
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
If the page to cmpxchg is user mode read only (not write),
we should simulate a data abort first.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
If the DT physical address is zero, this is equivalent to no DT.
Especially when the actual RAM physical address is not located at zero,
the result of phys_to_virt() would point to la-la-land and crash the
kernel, which crash is completely silent this early during boot.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This patch fixes the lockdep warning of "unannotated irqs-off"[1].
After entering __irq_usr, arm core will disable interrupt automatically,
but __irq_usr does not annotate the irq disable, so lockdep may complain
the warning if it has chance to check this in irq handler.
This patch adds trace_hardirqs_off in __irq_usr before entering irq_handler
to handle the irq, also calls ret_to_user_from_irq to avoid calling
disable_irq again.
This is also a fix for irq off tracer.
[1], lockdep warning log of "unannotated irqs-off"
[ 13.804687] ------------[ cut here ]------------
[ 13.809570] WARNING: at kernel/lockdep.c:3335 check_flags+0x78/0x1d0()
[ 13.816467] Modules linked in:
[ 13.819732] Backtrace:
[ 13.822357] [<c01cb42c>] (dump_backtrace+0x0/0x100) from [<c06abb14>] (dump_stack+0x20/0x24)
[ 13.831268] r6:c07d8c2c r5:00000d07 r4:00000000 r3:00000000
[ 13.837280] [<c06abaf4>] (dump_stack+0x0/0x24) from [<c01ffc04>] (warn_slowpath_common+0x5c/0x74)
[ 13.846649] [<c01ffba8>] (warn_slowpath_common+0x0/0x74) from [<c01ffc48>] (warn_slowpath_null+0x2c/0x34)
[ 13.856781] r8:00000000 r7:00000000 r6:c18b8194 r5:60000093 r4:ef182000
[ 13.863708] r3:00000009
[ 13.866485] [<c01ffc1c>] (warn_slowpath_null+0x0/0x34) from [<c0237d84>] (check_flags+0x78/0x1d0)
[ 13.875823] [<c0237d0c>] (check_flags+0x0/0x1d0) from [<c023afc8>] (lock_acquire+0x4c/0x150)
[ 13.884704] [<c023af7c>] (lock_acquire+0x0/0x150) from [<c06af638>] (_raw_spin_lock+0x4c/0x84)
[ 13.893798] [<c06af5ec>] (_raw_spin_lock+0x0/0x84) from [<c01f9a44>] (sched_ttwu_pending+0x58/0x8c)
[ 13.903320] r6:ef92d040 r5:00000003 r4:c18b8180
[ 13.908233] [<c01f99ec>] (sched_ttwu_pending+0x0/0x8c) from [<c01f9a90>] (scheduler_ipi+0x18/0x1c)
[ 13.917663] r6:ef183fb0 r5:00000003 r4:00000000 r3:00000001
[ 13.923645] [<c01f9a78>] (scheduler_ipi+0x0/0x1c) from [<c01bc458>] (do_IPI+0x9c/0xfc)
[ 13.932006] [<c01bc3bc>] (do_IPI+0x0/0xfc) from [<c06b0888>] (__irq_usr+0x48/0xe0)
[ 13.939971] Exception stack(0xef183fb0 to 0xef183ff8)
[ 13.945281] 3fa0: ffffffc3 0001500c 00000001 0001500c
[ 13.953948] 3fc0: 00000050 400b45f0 400d9000 00000000 00000001 400d9600 6474e552 bea05b3c
[ 13.962585] 3fe0: 400d96c0 bea059c0 400b6574 400b65d8 20000010 ffffffff
[ 13.969573] r6:00000403 r5:fa240100 r4:ffffffff r3:20000010
[ 13.975585] ---[ end trace efc4896ab0fb62cb ]---
[ 13.980468] possible reason: unannotated irqs-off.
[ 13.985534] irq event stamp: 1610
[ 13.989044] hardirqs last enabled at (1610): [<c01c703c>] no_work_pending+0x8/0x2c
[ 13.997131] hardirqs last disabled at (1609): [<c01c7024>] ret_slow_syscall+0xc/0x1c
[ 14.005371] softirqs last enabled at (0): [<c01fe5e4>] copy_process+0x2cc/0xa24
[ 14.013183] softirqs last disabled at (0): [< (null)>] (null)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
* setns:
ns: Wire up the setns system call
Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
|
|
32bit and 64bit on x86 are tested and working. The rest I have looked
at closely and I can't find any problems.
setns is an easy system call to wire up. It just takes two ints so I
don't expect any weird architecture porting problems.
While doing this I have noticed that we have some architectures that are
very slow to get new system calls. cris seems to be the slowest where
the last system calls wired up were preadv and pwritev. avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h. frv is
behind with perf_event_open being the last syscall wired up. On h8300
the last system call wired up was epoll_wait. On m32r the last system
call wired up was fallocate. mn10300 has recvmmsg as the last system
call wired up. The rest seem to at least have syncfs wired up which was
new in the 2.6.39.
v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall conflicts.
v7: ported to Linus's latest post 2.6.39 tree.
> arch/blackfin/include/asm/unistd.h | 3 ++-
> arch/blackfin/mach-common/entry.S | 1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>
Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
This patch makes TTBR1 point to swapper_pg_dir so that global, kernel
mappings can be used exclusively on v6 and v7 cores where they are
needed.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit 228e548e (net: Add sendmmsg socket system call) added the new
sendmmsg syscall. Add this to the syscall table for ARM.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
* To remove the risk of inconvenient register allocation decisions
by the compiler, these functions are separated out as pure
assembler.
* The apcs frame manipulation code is not applicable for Thumb-2
(and also not easily compatible). Since it's not essential to
have a full frame on these leaf assembler functions, the frame
manipulation is removed, in the interests of simplicity.
* Split up ldm/stm instructions to be compatible with Thumb-2,
as well as avoiding instruction forms deprecated on >= ARMv7.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
devel-stable
|
|
into devel-stable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Unify input section names
percpu: Avoid extra NOP in percpu_cmpxchg16b_double
percpu: Cast away printk format warning
percpu: Always align percpu output section to PAGE_SIZE
Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
|
