summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/cm2_44xx.h
AgeCommit message (Collapse)Author
2011-07-09OMAP4: cm: Remove RESTORE macros to avoid access from SWBenoit Cousson
The restore part of the CM is an alias of some regular registers used only during the SAR restore to facilate the dma to write a contiguous set of registers. The registers should never be used by the SW, only the original register have to be used. Remove them from cmX_44xx.h files to avoid anybody to use them by mistake. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: prcm: Fix errors in few defines nameBenoit Cousson
A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21OMAP4: CM instances: add clockdomain register offsetsPaul Walmsley
In OMAP4 CM instances, some registers (CM_CLKSTCTRL, CM_STATICDEP, CM_DYNAMICDEP, and the module-specific registers underneath) are organized by clockdomain. Add the clockdomain offset macros to the appropriate PRCM module header files. This data was almost completely autogenerated from the TI hardware database; the autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21OMAP4: PRCM: add OMAP4-specific accessor/mutator functionsPaul Walmsley
In some ways, the OMAP4 PRCM register layout is quite different than the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a register layout point of view, all CM instances were located in the CM subsystem, and all PRM instances were located in the PRM subsystem. OMAP4 changes this. Now, for example, some CM instances, such as WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a "local PRCM" exists for the MPU - this PRCM combines registers that would normally appear in both CM and PRM instances, but uses its own register layout which matches neither the OMAP2/3 PRCM layout nor the OMAP4 PRCM layout. To try to deal with this, introduce some new functions, omap4_cminst* and omap4_prminst*. The former is to be used when writing to a CM instance register (no matter what subsystem or hardware module it exists in), and the latter, similarly, with PRM instance registers. To determine which "PRCM partition" to write to, the functions take a PRCM instance ID argument. Subsequent patches add these partition IDs to the OMAP4 powerdomain and clockdomain definitions. As far as I can see, there's really no good way to handle these types of register access inconsistencies. This patch seemed like the least bad approach. Moving forward, the long-term goal is to remove all direct PRCM register access from the PM code. PRCM register access should go through layers such as the powerdomain and clockdomain code that can hide the details of how to interact with the specific hardware variant. While here, rename cm4xxx.c to cm44xx.c to match the naming convention of the other OMAP4 PRCM files. Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak <rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21OMAP4: PRCM: rename _MOD macros to _INSTPaul Walmsley
Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-21OMAP4: PRCM: reorganize existing OMAP4 PRCM header filesPaul Walmsley
Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>