summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/omap4-common.c
AgeCommit message (Collapse)Author
2011-06-16omap: Use separate init_irq functions to avoid cpu_is_omap tests earlyTony Lindgren
This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915Santosh Shilimkar
Populate the l2x0 set_debug function pointer with OMAP secure call and enable the PL310 Errata 727915 This patch has dependency on the earlier patch ARM: l2x0: Errata fix for flush by Way operation can cause data corruption Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-06Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2010-12-18omap4: l2x0: Enable early BRESP bitSantosh Shilimkar
The AXI protocol specifies that the write response can only be sent back to an AXI master when the last write data has been accepted. This optimization enables the PL310 to send the write response of certain write transactions as soon as the store buffer accepts the write address. This behavior is not compatible with the AXI protocol and is disabled by default. You enable this optimization by setting the Early BRESP Enable bit in the Auxiliary Control Register (bit [30]). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18omap4: l2x0: Set share override bitSantosh Shilimkar
Clearing bit 22 in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18omap4: l2x0: enable instruction and data prefetchingMans Rullgard
Enabling L2 prefetching improves performance as shown on Panda ES2.1 board with mem test, and it has measurable impact on performances. I think we should consider it, even though it damages "writes" a bit. (rebased to k.org) Usually the prefetch is used at both levels together L1 + L2, however, to enable the CP15 prefetch engines, these are under security, and on GP devices, we cannot enable it(e.g. on PandaBoard). However, just enabling PL310 prefetch seems to provide performance improvement, as shown in the data below (from Ubuntu) and would be a great thing to pull in. What prefetch does is enable automatic next line prefetching. With this enabled, whenever the PL310 receives a cachable read request, it automatically prefetches the following cache line as well. Measurement Data: == STOCK 10.10 WITHOUT PATCH ======================== ~# ./memspeed size 8388608 8192k 8M offset 8388608, 0 buffers 0x2aaad000 0x2b2ad000 copy libc 133 MB/s copy Android v5 273 MB/s copy Android NEON 235 MB/s copy INT32 116 MB/s copy ASM ARM 187 MB/s copy ASM VLDM 64 204 MB/s copy ASM VLDM 128 173 MB/s copy ASM VLD1 216 MB/s read ASM ARM 286 MB/s read ASM VLDM 242 MB/s read ASM VLD1 286 MB/s write libc 1947 MB/s write ASM ARM 1943 MB/s write ASM VSTM 1942 MB/s write ASM VST1 1935 MB/s 10.10 + PATCH ============= ~# ./memspeed size 8388608 8192k 8M offset 8388608, 0 buffers 0x2ab17000 0x2b317000 copy libc 129 MB/s copy Android v5 256 MB/s copy Android NEON 356 MB/s copy INT32 127 MB/s copy ASM ARM 321 MB/s copy ASM VLDM 64 337 MB/s copy ASM VLDM 128 321 MB/s copy ASM VLD1 350 MB/s read ASM ARM 496 MB/s read ASM VLDM 470 MB/s read ASM VLD1 488 MB/s write libc 1701 MB/s write ASM ARM 1682 MB/s write ASM VSTM 1693 MB/s write ASM VST1 1681 MB/s Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18omap4: l2x0: Construct the AUXCTRL value using definesSantosh Shilimkar
This patch removes the hardcoded value of auxctrl value and construct it using bitfields Bit 25 is reserved and is always set to 1. Same value of this bit is retained in this patch Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-14ARM: GIC: consolidate gic_cpu_base_addr to common GIC codeRussell King
Every architecture using the GIC has a gic_cpu_base_addr pointer for GIC 0 for their entry assembly code to use to decode the cause of the current interrupt. Move this into the common GIC code. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: provide a single initialization function for boot CPURussell King
Provide gic_init() which initializes the GIC distributor and current CPU's GIC interface for the boot (or single) CPU. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28Merge branch 'l2x0-pull-rmk' of ↵Russell King
git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel-stable
2010-10-26omap4: l2x0: Override the default l2x0_disableSantosh Shilimkar
The machine_kexec() calls outer_disable which can crash on OMAP4 becasue of trustzone restrictions. This patch overrides the default l2x0_disable with a OMAP4 specific implementation taking care of trustzone Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-09-24omap4: l2x0: Fix init parameter for es2.0Santosh Shilimkar
On ES2.0 the L2 cache init parameter ineeds to be changed to take care of cache size. The cache size is 1MB on ES2.0 vs 512KB on ES1.0 This patch fixes the init parameter to update the same using dynamic cpu version check Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-05-20omap4: Move SOC specific code from board fileSantosh Shilimkar
This patch moves OMAP4 soc specific code from 4430sdp board file. The change is necessary so that newer board support can be added with minimal changes. This will be also problematic for multi-board, multi-omap builds. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>